Isolation and screening of chromium resistant bacteria from industrial waste for bioremediation purposes / Isolamento e triagem de bactérias resistentes ao cromo de resíduos industriais para fins de biorremediação

Chromium (VI) a highly toxic metal, a major constituent of industrial waste. It is continuously release in soil and water, causes environmental and health related issues, which is increasing public concern in developing countries like Pakistan. The basic aim of this study was isolation and screening of chromium resistant bacteria from industrial waste collected from Korangi and Lyari, Karachi (24˚52ʹ46.0ʺN 66˚59ʹ25.7ʺE and 24˚48ʹ37.5ʺN 67˚06ʹ52.6ʺE). Among total of 53 isolated strains, seven bacterial strains were selected through selective enrichment and identified on the basis of morphological and biochemical characteristics. These strains were designated as S11, S13, S17, S18, S30, S35 and S48, resistance was determined against varying concentrations of chromium (100-1500 mg/l). Two bacterial strains S35 and S48 showed maximum resistance to chromium (1600 mg/l). Bacterial strains S35 and S48 were identified through 16S rRNA sequence and showed 99% similarity to Bacillus paranthracis and Bacillus paramycoides. Furthermore, growth condition including temperature and pH were optimized for both bacterial strains, showed maximum growth at temperature 30ºC and at optimum pH 7.5 and 6.5 respectively. It is concluded that indigenous bacterial strains isolated from metal contaminated industrial effluent use their innate ability to transform toxic heavy metals to less or nontoxic form and can offer an effective tool for monitoring heavy metal contamination in the environment.

O cromo (VI), metal altamente tóxico, é um dos principais constituintes dos resíduos industriais. É liberado no solo e na água, causa problemas ambientais e de saúde de crescente preocupação pública em países em desenvolvimento como o Paquistão. O objetivo básico deste estudo foi o isolamento e a triagem de bactérias resistentes ao cromo de resíduos industriais coletados em Korangi e Lyari, Karachi (24˚52’46,0”N 66˚59’25,7”E e 24˚48’37,5”N 67˚06’52,6”E). Do total de 53 cepas isoladas, sete cepas bacterianas foram selecionadas por enriquecimento seletivo e identificadas com base em características morfológicas e bioquímicas. Essas cepas foram designadas como S11, S13, S17, S18, S30, S35 e S48, apresentaram alta resistência aos metais contra concentrações variáveis (100-1500 mg / l) de cromo. Já as cepas S35 e S48 foram identificadas por meio da sequência 16S rRNA e apresentaram 99% de similaridade com Bacillus paranthracis e Bacillus paramycoides. Além disso, as condições de crescimento incluindo temperatura e pH foram otimizadas e ambas as cepas bacterianas apresentaram crescimento máximo na temperatura de 30ºC, enquanto seu pH ótimo foi observado em 7,5 e 6,5, respectivamente. Conclui-se que o potencial de resistência dessas bactérias resistentes ao cromo pode ser efetivamente utilizado na remoção de cromo de efluentes industriais contaminados. Técnicas de base biológica usando bactérias ajudarão a fornecer métodos mais baratos e ecológicos de remoção, recuperação e desintoxicação de cromo.

Isolation and screening of chromium resistant bacteria from industrial waste for bioremediation purposes / Isolamento e triagem de bactérias resistentes ao cromo de resíduos industriais para fins de biorremediação

Chromium (VI) a highly toxic metal, a major constituent of industrial waste. It is continuously release in soil and water, causes environmental and health related issues, which is increasing public concern in developing countries like Pakistan. The basic aim of this study was isolation and screening of chromium resistant bacteria from industrial waste collected from Korangi and Lyari, Karachi (24˚52ʹ46.0ʺN 66˚59ʹ25.7ʺE and 24˚48ʹ37.5ʺN 67˚06ʹ52.6ʺE). Among total of 53 isolated strains, seven bacterial strains were selected through selective enrichment and identified on the basis of morphological and biochemical characteristics. These strains were designated as S11, S13, S17, S18, S30, S35 and S48, resistance was determined against varying concentrations of chromium (100-1500 mg/l). Two bacterial strains S35 and S48 showed maximum resistance to chromium (1600 mg/l). Bacterial strains S35 and S48 were identified through 16S rRNA sequence and showed 99% similarity to Bacillus paranthracis and Bacillus paramycoides. Furthermore, growth condition including temperature and pH were optimized for both bacterial strains, showed maximum growth at temperature 30ºC and at optimum pH 7.5 and 6.5 respectively. It is concluded that indigenous bacterial strains isolated from metal contaminated industrial effluent use their innate ability to transform toxic heavy metals to less or nontoxic form and can offer an effective tool for monitoring heavy metal contamination in the environment.(AU)

O cromo (VI), metal altamente tóxico, é um dos principais constituintes dos resíduos industriais. É liberado no solo e na água, causa problemas ambientais e de saúde de crescente preocupação pública em países em desenvolvimento como o Paquistão. O objetivo básico deste estudo foi o isolamento e a triagem de bactérias resistentes ao cromo de resíduos industriais coletados em Korangi e Lyari, Karachi (24˚5246,0”N 66˚5925,7”E e 24˚4837,5”N 67˚0652,6”E). Do total de 53 cepas isoladas, sete cepas bacterianas foram selecionadas por enriquecimento seletivo e identificadas com base em características morfológicas e bioquímicas. Essas cepas foram designadas como S11, S13, S17, S18, S30, S35 e S48, apresentaram alta resistência aos metais contra concentrações variáveis (100-1500 mg / l) de cromo. Já as cepas S35 e S48 foram identificadas por meio da sequência 16S rRNA e apresentaram 99% de similaridade com Bacillus paranthracis e Bacillus paramycoides. Além disso, as condições de crescimento incluindo temperatura e pH foram otimizadas e ambas as cepas bacterianas apresentaram crescimento máximo na temperatura de 30ºC, enquanto seu pH ótimo foi observado em 7,5 e 6,5, respectivamente. Conclui-se que o potencial de resistência dessas bactérias resistentes ao cromo pode ser efetivamente utilizado na remoção de cromo de efluentes industriais contaminados. Técnicas de base biológica usando bactérias ajudarão a fornecer métodos mais baratos e ecológicos de remoção, recuperação e desintoxicação de cromo.(AU)

Water pollution of the Oued D'Hous River (Algeria) and its potential impact on fauna and flora

Water plays a crucial role in all aspects of our lives, including the economy, food security, production, and politics, making it essential for sustainable development. Surface water pollution, which includes rivers, lakes, and oceans, is a significant environmental concern. Oued D'Hous, located in the Wilaya of Bouira in Algeria, is the subject of our research, which examines its hydrochemical pollution resulting from the discharge of domestic, industrial, and agricultural wastewater from the city. The evaluation of the physicochemical parameters reveals that the existing pollutant levels in Oued D'Hous have significantly increased, leading to a high degree of toxicity that threatens the area's flora and fauna. This pollution also limits the use of this resource by humans. We call upon the competent authorities to promptly limit the discharge of these hazardous effluents into Oued D'Hous to prevent further water contamination and reduce the risk of adverse health effects on the public, including those who use the wells located in the vicinity. In conclusion, immediate measures are necessary to mitigate the severe pollution of Oued D'Hous, and we urge the authorities to take action to address this pressing environmental concern.

'Alecrim Pimenta' nanoformulated essential oil (Lippia sidoides) as additive in consortium silages / Óleo essencial nanoformulado de alecrim pimenta (Lippia sidoides) como aditivo em silagens consorciadas

The presence of spoilage microorganisms in forage interferes with the fermentation process of silage, due to competition with lactic acid bacteria for substrate, generating losses and influencing the nutritional value of the ensiled material. Thus, the objective is to evaluate the effect of "Alecrim Pimenta" essential oil (Lippia sidoides) and nanoformulated thymol on microbiological, fermentative and aerobic stability profile of sorghum (Sorghum bicolor cv. BRS Ponta Negra) silage intercropped with Paiaguás grass (Urochloa brizantha cv. BRS Paiaguás). A 4 x 3 factorial design was adopted, with four additives applied to the silages (control treatment; nanoformulated "Alecrim Pimenta" essential oil (OEN); 62% nanoformulated thymol; and 100% pure nanoformulated thymol), associated with three silo period times (15, 30 and 45 days), with five replications per treatment, totaling 60 mini silos. The Clostridium population was higher in the control treatment and in the OEN. The Lactobacillus population decreased with the increase in silo opening time. Higher aerobic stabilities were recorded in silages with 100% nanoformulated thymol with opening at 15 days; and silages with 62% nanoformulated Thymol (opening period at 30 and 45 days). Silages with 100% thymol provided higher losses of dry matter, gases and effluents, while the use of OEN provided lower losses of dry matter and gases. Silos opened at 45 days showed higher losses of dry matter, gases and effluents. Sorghum and Paiaguás grass silages that received nanoformulated thymol were more efficient in controlling Clostridium and Lactobacillus populations, and this additive improved the aerobic stability of the silage.

A presença de microrganismos deterioradores na forragem interfere no processo fermentativo da silagem, devido a competição com as bactérias ácido láticas por substrato, gerando perdas e influenciando o valor nutritivo do material ensilado. Assim, objetiva-se avaliar o efeito do óleo essencial de Alecrim pimenta (Lippia sidoides) e do timol nanoformulado sobre perfil microbiológico, fermentativo e estabilidade aeróbia de silagem do consórcio de Sorgo (Sorghum bicolor var. Ponta Negra) com capim Paiaguás (Urochloa brizantha cv. Paiaguás). Foi adotado esquema fatorial 4 x 3, quatro aditivos aplicados nas silagens (tratamento controle; óleo essencial de Alecrim pimenta nanoformulado (OEN); timol nanoformulado 62%; e timol nanoformulado 100% de pureza), associados a três tempos de abertura do silo (15, 30 e 45 dias), com cinco repetições por tratamento, totalizando 60 mini silos. A população de Clostridium foi maior no tratamento controle e no OEN. A população de Lactobacillus reduziu com o aumento no tempo de abertura do silo. Maiores estabilidades aeróbica foram registradas em silagens com timol nanoformulado 100% com abertura aos 15 dias; e silagens com Timol nanoformulado 62% (tempos de abertura aos 30 e 45 dias). Silagens com timol 100% proporcionaram maiores perdas de matéria seca, gases e efluentes, enquanto que o uso de OEN proporcionou menores perdas de matéria seca e gases. Silos com abertura aos 45 dias apresentaram maiores perdas de matéria seca, gases e efluentes. Silagens de Sorgo e capim Paiaguás que recebram timol nanoformulado foram mais eficientes em controlar as populações de Clostridium e Lactobacillus, bem como este aditivo melhorou a estabilidade aeróbica da silagem.

Efficiency of the anaerobic baffled reactor followed by anaerobic filter in the removal of nutrients and pathogenic organisms in fish processing effluents / [Eficiência do reator ABR seguido de filtro anaeróbio na remoção de nutrientes e de organismos patogênicos em efluentes de processamento de pescado]

The aquaculture showed high growth along with the increase in the consumption of animal protein from this sector. The processing industries facilitate the preparation of fish for the consumer; however, they generate large volumes of effluents with a high polluting potential. Environmental legislation establishes norms for the release of effluents, making it necessary to implement treatment systems to reduce the pollutants generated. The objective of this work was to evaluate the performance of a compartmentalized anaerobic reactor (ABR) followed by an anaerobic filter (AF) treating fish processing effluent. The work was carried out in a slaughterhouse that had an effluent treatment station consisting of a static sieve, grease box, ABR reactor and anaerobic filter. Monitoring consisted of physical-chemical and biological analyzes of samples collected from the influent and effluents from each stage of treatment. The parameters evaluated were ammonia, nitrite, nitrate, NTK, phosphate and coliforms. The average results of the removal efficiency of these parameters, respectively, for the ABR reactor were 5, 40, 69, -19, -25 and 83%, and for the AF -0.5, 73, 53, 10, -17 and -17%. The system composed by the ABR reactor followed by the Anaerobic Filter showed high removal of nitrite, nitrate, and coliforms.

A atividade de aquicultura apresentou elevado crescimento, juntamente com o aumento do consumo de proteína animal proveniente desse setor. As indústrias de processamento facilitam o preparo do pescado ao consumidor, todavia geram grandes volumes de efluentes de alto potencial poluidor. A legislação ambiental estabelece normas para o lançamento de efluentes, tornando necessária a implementação de sistemas de tratamento para a redução dos poluentes gerados. O objetivo deste trabalho foi avaliar o desempenho de um reator anaeróbio compartimentado (ABR) seguido por filtro anaeróbio (FA), tratando efluente de processamento de pescado. O trabalho foi desenvolvido em um frigorífico que possuía uma estação de tratamento de efluentes composta por peneira estática, caixa de gordura, reator ABR e filtro anaeróbio. O monitoramento consistiu em análises físico-químicas e biológicas de amostras coletadas do afluente e dos efluentes de cada etapa do tratamento. Os parâmetros avaliados foram: amônia, nitrito, nitrato, NTK, fosfato e coliformes. Os resultados médios da eficiência de remoção desses parâmetros, respectivamente, do reator ABR foram de 5, 40, 69, -19, -25 e 83%, e do FA -0,5, 73, 53, 10, -1, e -17%. O sistema composto pelo reator ABR seguido pelo filtro anaeróbio apresentou alta remoção de nitrito, nitrato e coliformes.

Tratamento de efluentes na piscicultura com ênfase em tratamentos sustentáveis / Treatment of effluents in pisciculture with emphasis on sustainable treatments

O objetivo desse trabalho foi realizar revisão bibliográfica de caráter exploratório sobre tratamento de efluentes na piscicultura com ênfase nos tratamentos sustentáveis e seu impacto ecológico. A importância deste tema envolve pesquisar métodos de tratamentos alternativos aos dejetos da piscicultura, visto sua importância referente à sustentabilidade. Além disso, há tendência mundial da população buscar hábitos alimentares saudáveis, que gerem menor impacto ao meio ambiente, influenciando diretamente no desenvolvimento agropecuário. A proposta de tratamento de efluentes na piscicultura por métodos alternativos visa a diminuição de poluentes na água, considerando técnicas já utilizadas em saneamento básico, aplicadas com os efluentes da aquicultura. No Brasil, utiliza-se o método de processos oxidativos avançados ­ POA por cloro, que ao reagir com outros compostos, libera substâncias contaminantes ao meio ambiente. De um modo geral, a piscicultura produz baixo impacto ambiental e à saúde humana, mas é importante enfatizar a relação única de saúde na produção de alimentos.(AU)

The objective of this work was to carry out an exploratory literature review on effluent treatment in fish farming with an emphasis on sustainable treatments and their ecological impact. The importance of this theme involves researching alternative treatment methods to fish farming waste, given its importance in terms of sustainability. In addition, there is a global tendency of the population to seek healthy eating habits, which generate less impact on the environment, directly influencing agricultural development. The proposed treatment of effluents in fish farming by alternative methods aims to reduce pollutants in the water, considering techniques already used in basic sanitation, applied with effluents from aquaculture. In Brazil, advanced oxidative processes are used ­ POA's by chlorine, which when reacting with other compounds, releases contaminant substances into the environment. In general, fish farming has a low impact on the environment and human health, but it is important to emphasize the unique relationship of health in food production.(AU)

Employment of chitosan in the removal of pollutants in fish processing effluents / [Emprego de quitosana na remoção de poluentes em efluentes de processamento de pescado]

The significant growth of the industrial sector in recent decades has led to an increase in the volume of waste, which if not properly destined, could cause serious environmental problems. In the context of aquaculture, liquid effluents with a high organic content are generated in large quantities in the fish processing industries, and if their disposal is carried out improperly, serious damage to the environment is caused. The general objective of this study is to evaluate: the efficiency of removal of COD and BOD, in addition to the influence on pH; alkalinity; chlorides; ammonia; nitrite; nitrate; phosphate; turbidity; total, fixed and volatile solids, from the effluent of fish processing treated by coagulation and sedimentation using the natural chitosan coagulant. pH 5.5 followed by pH 6 showed better results for the use of chitosan coagulant in the process of treatment by effluent coagulation of fish processing industry. Chitosan does not act on the parameters TVS, alkalinity, chlorides, ammonia, nitrite, nitrate, and phosphate, regardless of the dosage used. However, it acts on BOD, COD, TS, TFS and turbidity. Thus, the best dosage of chitosan is 0.25 g L-1 in optimized activity at pH of 5.5.

O crescimento expressivo do setor industrial nas últimas décadas acarretou o aumento do volume de resíduos, que, se não forem destinados adequadamente, poderão causar sérios problemas ambientais. No contexto da aquacultura, efluentes líquidos com um alto teor orgânico são gerados em grandes quantidades nas indústrias de processamento de pescado, e, se seu descarte for realizado de maneira inadequada, há sérios prejuízos ao ambiente. O objetivo geral deste estudo foi avaliar: a eficiência de remoção de DQO e DBO, além da influência sobre o pH, a alcalinidade, os cloretos, a amônia, o nitrito, o nitrato, o fosfato, a turbidez, os sólidos totais, fixos e voláteis, bem como do efluente do processamento de pescado tratado por coagulação e da sedimentação, utilizando-se o coagulante natural quitosana. O pH 5,5, seguido pelo pH 6, apresentou melhores resultados para uso do coagulante quitosana no processo de tratamento por coagulação de efluente de indústria de processamento de pescado. A quitosana não atua sobre os parâmetros STV, alcalinidade, cloretos, amônia, nitrito, nitrato e fosfato, independentemente da dosagem utilizada. Mas atua sobre DBO, DQO, ST, STF e turbidez. Assim, a melhor dosagem de quitosana é 0,25 g L-1 em atividade otimizada no pH de 5,5.

Evaluation of the efficiency of anaerobic reactors in the removal of pollutants from fish processing effluents / Avaliação da eficiência de reatores anaeróbios na remoção de poluentes em efluentes do processamento de pescado

The objective of the present work was to evaluate the performance of a compartmentalized anaerobic reactor (CAR) followed by anaerobic filter in real scale, effluent treatment from fish fridge processing. The work was developed in a fish fridge located in the south of the state of Minas Gerais, which has an effluent treatment plant composed of static screen, grease removal device, CAR reactor and anaerobic filter. The monitoring happened trough physical-chemical parameters of fluids and effluents from all sampling points of the plant biweekly. The parameters evaluated were temperature, pH, chemical oxygen demand (COD), biochemical oxygen demand (BOD), total suspended solids (TSS), volatile suspended solids (VSS), volatile fatty acids (VFA) and alkalinity. Operational problems found in the primary treatment were not limiting for the system performance, which managed to meet the parameters of environmental legislation in Minas Gerais according to the efficiency of removal of COD, BOD and VSS from wastewater from fish processing.

O presente trabalho teve como objetivo avaliar o desempenho de reator anaeróbio compartimentado (RAC) seguido por filtro anaeróbio em escala real tratando efluentes do processamento de frigorífico de pescado. O trabalho foi desenvolvido em um frigorífico de pescado localizado no sul do estado de Minas Gerais, que possui uma estação de tratamento de efluentes composta por peneira estática, caixa de gordura, reator ABR e filtro anaeróbio. O monitoramento do sistema consistiu em um conjunto de análises físico-químicas dos afluentes e efluentes de todos os pontos de coleta de amostras da estação de tratamento coletados quinzenalmente. Os parâmetros avaliados foram temperatura, pH, demanda química de oxigênio (DQO), demanda bioquímica de oxigênio (DBO), sólidos suspensos totais (SST), sólidos suspensos voláteis (SSV), ácidos voláteis totais (AVT) e alcalinidade. Problemas operacionais encontrados no tratamento primário não foram limitantes para o sistema, que conseguiu atender parâmetros da legislação ambiental de Minas Gerais quanto à eficiência de remoção de DQO, DBO e SSV das águas residuárias do processamento de pescado. O sistema de tratamento é uma alternativa promissora para o tratamento de efluentes do processamento de pescado.

Uso de quitina e quitosana como adsorventes de amônia de efluentes aquícolas: revisão de literatura / Use of chitin and quitosan as adsorvents of ammonia of aquaculture effluents: a literature review / Uso de quitina y quitosana como adsorbentes de amonia de efluentes acuícolas: revisión de literatura

Os resíduos provenientes da aquicultura são derivados da ração e da excreção dos peixes e podem estar sedimentados, suspensos ou dissolvidos, ocasionando elevados valores de DBO, DQO, nitrogênio e fósforo. A produção de camarões no Brasil tem gerado elevadas quantidades de resíduos sólidos, tendo em vista que os exoesqueletos dos camarões correspondem a cerca de 40% do seu peso total, resultando num forte impacto ambiental. Diversas pesquisas envolvendo a quitina estão sendo desenvolvidas na área de tratamento de água, devido principalmente a sua capacidade de formar filme, sendo utilizada em sistemas filtrantes. Este polissacarídeo também pode ser utilizado como agente floculante no tratamento de efluentes, como adsorvente na clarificação de óleos, e principalmente na produção de quitosana. Atualmente a quitosana possui aplicações multidimensionais, desde áreas como a nutrição humana, biotecnologia, ciência dos materiais, indústria farmacêutica, agricultura, terapia genética e proteção ambiental. A quitosana é muito eficiente na remoção de poluentes em diferentes concentrações. Apresenta alta capacidade e grande velocidade de adsorção, boa eficiência e seletividade tanto em soluções que possuem altas ou baixas concentrações. O uso da biotecnologia, através do processo de adsorção utilizando adsorventes naturais e baratos, como a quitina e quitosana, minimiza os impactos ambientais da aquicultura tanto em relação aos provocados pelo lançamento de efluentes no meio ambiente quanto aos causados pelo descarte inadequado dos resíduos do processamento de camarões.(AU)

Aquaculture residues are derived from fish feed and excretion and may be sedimented, suspended or dissolved, resulting in high BOD, COD, nitrogen and phosphorus values. Shrimp production in Brazil has generated high amounts of solid waste, since shrimp exoskeletons account for about 40% of their total weight, resulting in a strong environmental impact. Several researches involving chitin are being developed in the area of water treatment, mainly due to its ability to form film, being used in filter systems. This polysaccharide can also be used as a flocculating agent in the treatment of effluents, as an adsorbent in the clarification of oils, and especially in the production of chitosan. Currently, chitosan has multidimensional applications, from areas such as human nutrition, biotechnology, materials science, pharmaceutical industry, agriculture, gene therapy and environmental protection. Chitosan is very efficient in the removal of pollutants at different concentrations. It presents high capacity and high adsorption velocity, good efficiency and selectivity both in solutions that have high or low concentrations. The use of biotechnology, through the adsorption process using natural and cheap adsorbents such as chitin and chitosan, minimizes the environmental impacts of aquaculture both in relation to those caused by the release of effluents into the environment and those caused by the inappropriate disposal of processing residues of shrimps.(AU)

Los residuos procedentes de la acuicultura se derivan de la ración y de la excreción de los peces y pueden estar sedimentados, suspendidos o disueltos, ocasionando elevados valores de DBO, DQO, nitrógeno y fósforo. La producción de camarones en Brasil ha generado grandes cantidades de residuos sólidos, teniendo en cuenta que los exoesqueletos de los camarones corresponden a cerca del 40% de su peso total, resultando en un fuerte impacto ambiental. Varias investigaciones involucrando la quitina se están desarrollando en el área de tratamiento de agua, debido principalmente a su capacidad de formar película, siendo utilizada en sistemas filtrantes. Este polisacárido también puede ser utilizado como agente floculante en el tratamiento de efluentes, como adsorbente en la clarificación de aceites, y principalmente en la producción de quitosana. Actualmente la quitosana posee aplicaciones multidimensionales, desde áreas como la nutrición humana, biotecnología, ciencia de los materiales, industria farmacéutica, agricultura, terapia genética y protección ambiental. La quitosana es muy eficiente en la eliminación de contaminantes en diferentes concentraciones. Presenta alta capacidad y gran velocidad de adsorción, buena eficiencia y selectividad tanto en soluciones que poseen altas o bajas concentraciones. El uso de la biotecnología, a través del proceso de adsorción utilizando adsorbentes naturales y baratos, como la quitina y quitosana, minimiza los impactos ambientales de la acuicultura tanto en relación a los provocados por el lanzamiento de efluentes en el medio ambiente en cuanto a los causados por el descarte inadecuado de los residuos del procesamiento de camarones.(AU)

Effect of storage time on the chemical composition of whole and grainless corn plant silage harvested at different maturity stages

The objective of this study was to evaluate the effect of harvesting corn at different maturity stages for silage production combined with four storage periods, considering nutrient loss and the chemical composition of silage of the whole plant and also of grainless plants. The experiment was performed in a completely randomized design with a factorial arrangement of six maturity stages of corn [reproductive (R); R1 to R6] and four periods of silage storage (30, 60, 90, and 120 days). At stages R1 and R2, losses by effluents occurred more intensely when compared with the more advanced stages, whereas losses by gases showed the opposite behavior, with stage R6 responsible for the greatest losses. Stage R4 showed a stable dry matter (DM) content during the storage period, 42.08%, and had the lowest levels of neutral detergent fiber (NDF), acid detergent fiber (ADF), and acid detergent lignin (ADL) for the whole plant silage. The ADL in the silage of grainless plant of stage R4 was not the lowest, but it was close to the first reproductive stages, being an important point, since the first reproductive stages can present a vegetative fraction of better quality. The highest DM volumes produced by area occurred in the most advanced stages; however, R5 obtained a greater reduction in volume over the days of storage (20.66 kg day−1). The production cost was lower at the advanced stages (R4, R5, and R6) when compared with the first reproductive stages (R1, R2, and R3), and in general, during the storage period the costs did not have great variations. Based on the chemical composition of the silages, DM losses during the storage period, the stability in the costs of DM ton over the days of storage, the R4 stage was the most suitable for silage production.(AU)

Mercury in muscle and liver of Plagioscion squamosissimus (Acanthuriformes: Sciaenidae) from the Machado River, Brazilian Amazon / Mercúrio no músculo e fígado de Plagioscion squamosissimus (Acanthuriformes: Sciaenidae) do Rio Machado, Amazônia brasileira

The Machado River is the main tributary of the Madeira River in the state of Rondônia, a region that has been impacted by deforestation, livestock, urban development, alluvial gold mining and urban and industrial effluents that likely contribute to the introduction of mercury (Hg) in the aquatic system. We aimed to determine the concentrations of total Hg (THg) in muscle and liver of Plagioscion squamosissimus, a main fishing resource in the region. Fish were sampled for two years at five sites, along a 90-km stretch of the middle Machado River. THg concentrations were analyzed in 64 muscle and 54 liver samples by cold vapor atomic absorption spectrophotometry (FIMS-400). THg levels were related with fish size and sex and with periods of the hydrological cycle. THg concentrations in both organs were positively and significantly related with fish body size. There was no significant variation in THg among periods of the hydrological cycle. Mean THg concentrations in muscle (1.09 ± 0.72 mg kg-1) and liver (1.28 ± 1.23 mg kg-1) were higher than the limit established by the WHO. Our results suggest that residual mercury from former alluvial gold extraction and lixiviation of mercury naturally occurring in the soil due to large-scale deforestaion is accumulating in the aquatic food chain in the Machado River. We conclude that it is necessary to monitor the levels of mercury in commercially important fish species in the region.(AU)

O Rio Machado é o principal afluente do Rio Madeira no estado de Rondônia, uma região impactada por desmatamento, pecuária, desenvolvimento urbano, mineração de ouro e efluentes urbanos e industriais, que provavelmente contribuem para a introdução de mercúrio (Hg) no sistema aquático. Nosso objetivo foi determinar as concentrações de Hg total (THg) em músculo e fígado de Plagioscion squamosissimus, um importante recurso pesqueiro na região. Os peixes foram amostrados durante dois anos em cinco locais ao longo de 90 km no médio Rio Machado. As concentrações de THg foram analisadas em 64 amostras de músculos e 54 de fígado por espectrofotometria de absorção atômica com vapor frio (FIMS-400). As concentrações de mercúrio foram relacionadas ao tamanho e sexo dos peixes, e com períodos do ciclo hidrológico. As concentrações de THg em ambos os órgãos foram relacionadas positiva e significativamente com o tamanho corporal dos peixes. Não houve variação significativa do THg entre os períodos do ciclo hidrológico. As concentrações médias de THg no músculo (1,09 ± 0,72 mg kg-1) e no fígado (1,28 ± 1,23 mg kg-1) foram superiores ao limite estabelecido pela OMS. Os resultados sugerem que o mercúrio residual da extração de ouro e lixiviação de mercúrio que ocorre naturalmente no solo desmatado está se acumulando na cadeia alimentar aquática do Rio Machado. Concluímos que é necessário monitorar os níveis de mercúrio em espécies de peixes comerciais na região.(AU)

The Cichlidae fish Geophagus brasiliensis (Quoy & Gaimard, 1824) has suitability as a sentinel species for changes caused by xenobiotics?

Industrial wastewater and agricultural practices are among the main activities discharging organic pollutants, such as Polychlorinated biphenyl (PCB) congeners and organochlorine insecticides (e.g. DDT - dichloro diphenyl trichloroethane), to the environment. In this study, we used the native Cichlidae fish species Geophagus brasiliensis as a sentinel to evaluate the hepatic 7-ethoxyresorufin-O-deethylase EROD activity, a biomarker of exposure to CYP1A-inducing pollutants, to assess the bioavailability of xenobiotics in two reaches of a large lotic system in Southeast Brazil: a less disturbed area (site 1) in the upper stretch, and an area in the middle stretch, which receives various industrial and agricultural effluents from upstream cities (site 2). In addition, G. brasiliensis were exposed to a single dose of 50 mg kg-1 beta-naphthoflavone (BNF) or of 50 mg kg-1 dimethylbenzoanthracene (DMBA) to test the effects on, respectively, the hepatic EROD activity in S9 supernatant fraction, and the frequency of micronucleated erythrocytes three days after the i.p. treatments, and compared to an unexposed group, to test its potential as a sentinel for biomonitoring studies. The EROD activity was approximately two-fold higher in fish from the impacted stretches than in fish from the less disturbed stretches (p < 0.05). Micronuclei (MN) frequency was also significantly different (p < 0.01) in DMBA-treated fish. The induced EROD activity in the impacted site suggests that organochlorinated pollutants are reaching the biota of the Paraíba do Sul River, confirming the suitability of Geophagus brasiliensis as a useful sentinel species to detect changes caused by xenobiotics(AU)

The fermentation efficiency exhibited by Saccharomyces cerevisiae on Sugarcane bagasse hydrolysate, by analyzing the effects of pre-treatment and detoxification / A eficiência da fermentação exibida por Saccharomyces cerevisiae no hidrolisado de bagaço de cana-de-açúcar, analisando os efeitos do pré-tratamento e destoxicação

In this study, the possibility of increasing fermentation efficiency of Saccharomyces cerevisiae on sugarcane bagasse (a type of lignocellulosic waste) was analyzed. Sugarcane bagasse was subjected to hydrothermal and acidic pre-treatment. Next, the enzymatic hydrolysis of raw biomass and each pre treated biomass was performed using CellicCtec® enzymatic complex to obtain sugarcane hydrolysate, hydrothermal hydrolysate and acidic hydrolysate. Next, these were fermented by S. cerevisiae to check if the by-products of enzymatic hydrolysis, furfural and acetic acid had an inhibitory effect on fermentation efficiency. Next, each pre-treated biomass was subjected to detoxification involving activated charcoal. Each detoxified biomass was tested for fermentation efficiency. The lignocellulosic composition for sugarcane hydrolysate, hydrothermal hydrolysate and acidic hydrolysate, varied significantly, and were found to be, for cellulose 36.7%, 27.7% and 63.7% respectively; for hemicellulose 22.2%, 4.4% and 12% respectively; and for lignin 21.2%, 27.7% and 28.7% respectively. The presence of furfural and acetic acid had a strong influence on the fermentation efficiency of S. cerevisiae, and affected the consumption of sugars in each biomass by more than 90%. Further, we found that the detoxification process increased fermentation efficiency by 12.7% for the hydrothermal hydrolysate while for the acidic hydrolysate no significant difference was observed. This study showed that fermentation with greater efficiency is viable through the combined use of hydrothermal pre-treatment and detoxification. This combination of methods also causes less pollution as compared with the method involving acid pre-treatment due to the reduced number of effluents produced.(AU)

Nesse trabalho avaliou-se a possibilidade de se aumentar a eficiência de fermentação de um hidrolisado de bagaço de cana submetido aos pré-tratamentos hidrotérmico (195 ºC, usando 200 rpm por 10 min) e ácido (0,5% (v/v) de ácido sulfúrico a 121ºC por 15 min) (carga de sólidos de 10% m/v). A hidrólise enzimática do material pré-tratado foi realizada utilizado o complexo enzimático CellicCtec® (60 FPU/gbiomassa seca, tampão citrato a 50 mM e pH 4,8) a 50ºC usando 150 rpm por 72h. Antes do processo de detoxificação, realizou-se um teste com a espécie de Saccharomyces cerevisiae para verificar se os compostos furfural (1 e 4g.L-1) e ácido acético (1 e 5% v/v) exerciam significativa inibição na espécie testada. O processo de detoxificação avaliou a concentração de carvão ativado (1, 3 e 5% m/v) e o tempo do processo (30, 45 e 60 min) a 30 ºC, 150 rpm por 24 h. A composição lignocelulosica da biomassa in natura e pré-tratada (hidrotérmico e ácido) foi para celulose (36,7, 27,7 e 63,7%), hemicelulose (22,2, 4,4 e 12%) e lignina (21,2, 27,7 e 28,7%), respectivamente e com rendimento mássico em torno de 60%. A presença de furfural e ácido acético exibiu forte influência na espécie considerada, chegando a prejudicar em mais de 90% o consumo de açúcares no meio. O processo de destoxificação aumentou 13% a eficiência de fermentação para o hidrolisado obtido hidrotermicamente, enquanto que para o ácido não houve diferença significativa. Obtendo assim uma fermentação com maior eficiência, tecnicamente viável e menos poluente.(AU)

Assessment of cadmium tolerance and biosorptive potential of Bacillus Cereus GCFSD01 isolated from cadmium contaminated soil / Avaliação da tolerância ao cádmio e do potencial biossorptivo de Bacillus Cereus GCFSD01 isolado de solo contaminado com cádmio

Continuous occurrence of heavy metals is a major cause of environmental pollution due to its toxic effects. At minimum concentrations, these metals are highly reactive and can gather in the food chains and food web, causing major dangers to public health concerns. Soil samples were collected from Paharang drain, Faisalabad. Cadmium tolerant bacteria were isolated and evaluated for their MIC against Cd. The isolated bacterial strain GCFSD01 showed MIC value upto 30 mM/L. The bacterial strain with the highest resistance against Cd was selected for further study. Molecular characterization of bacterial isolate GCFSD01 was performed by 16S rRNA which confirmed it as Bacillus cereus. Optimum growth conditions of bacterial strain were also evaluated. Strain GCFSD01 showed optimum growth at pH 7 and 37 °C temperature. Our result revealed that B. cereus strain GCFSD01 reduced 61.3% Cd after 48 hrs. Multiple metal tolerance and Cd reduction by B. cereus indicate its potential for further use for decontamination of polluted soil.

A ocorrência contínua de metais pesados é uma das principais causas de poluição ambiental devido aos seus efeitos tóxicos. A contaminação por metais pesados representa um grande risco para todas as formas de vida encontradas no meio ambiente. Em concentrações mínimas, esses metais são altamente reativos e podem se acumular nas cadeias alimentares e na cadeia alimentar, causando grandes perigos às preocupações com a saúde pública. Amostras de solo foram coletadas no esgoto de Paharang, Faisalabad. Bactérias tolerantes ao cádmio foram isoladas da amostra coletada pelo método da placa de ágar. As colônias separadas individuais selecionadas foram avaliadas quanto às suas concentrações inibitórias mínimas contra Cd. A cepa bacteriana isolada GCFSD01 apresentou valores de CIM de 30 mM/L. A colônia bacteriana que apresentou maior resistência contra o Cd foi selecionada para identificação. Após seleção da maior colônia bacteriana resistente ao Cd, coloração de Gram e diferentes testes bioquímicos foram realizados para a caracterização da bactéria isolada. A caracterização molecular do isolado bacteriano GCFSD01 foi realizada por PCR 16S rRNA confirmando a presença de Bacillus cereus. Após a identificação molecular, as condições ótimas de crescimento da cepa bacteriana também foram verificadas. A cepa GCFSD01 apresentou crescimento ótimo em pH 7 e temperatura de 37 °C. Nosso resultado revelou que a cepa de B. cereus GCFSD01 reduziu 61,3% de Cd após 48 horas. A tolerância a múltiplos metais e a redução de Cd por B. cereus indicam seu potencial para uso posterior na descontaminação do solo poluído.

Removal of nutrients from organic liquid agricultural waste using filamentous algae / Remoção de nutrientes de resíduos agrícolas líquidos orgânicos utilizando algas filamentosas

A feasibility analysis of tertiary treatment for Organic Liquid Agricultural Waste is presented using filamentous algae belonging to the genus Cladophora sp. as an alternative to chemical tertiary treatment. The main advantages of tertiary treatments that use biological systems are the low cost investment and the minimal dependence on environmental variables. In this work we demonstrate that filamentous algae reduces the nutrient load of nitrate (circa 75%) and phosphate (circa 86%) from the organic waste effluents coming from dairy farms after nine days of culture, with the added advantage being that after the treatment period, algae removal can be achieved by simple procedures. Currently, the organic wastewater is discarded into fields and local streams. However, the algae can acquire value as a by-product since it has various uses as compost, cellulose, and biogas. A disadvantage of this system is that clean water must be used to achieve enough water transparency to allow algae growth. Even so, the nutrient reduction system of the organic effluents proposed is friendly to the ecosystem, compared to tertiary treatments that use chemicals to precipitate and collect nutrients such as nitrates and phosphates.(AU)

Uma análise de viabilidade do tratamento terciário para Resíduos Agrícola Líquidos Orgânicos é apresentada usando algas filamentosas pertencentes ao gênero Cladophora sp. como alternativa ao tratamento químico terciário. Os tratamentos terciários que utilizam sistemas biológicos têm baixo custo de investimento e a dependência de variáveis ambientais é mínima. Neste trabalho, é demonstrado que essas algas filamentosas reduzem a carga nutricional de nitrato (circa 75%) e fosfato (circa 86%) dos efluentes de resíduos orgânicos provenientes de fazendas de leite em nove dias de cultura e tem a vantagem de que as algas podem ser facilmente coletadas posteriormente. Atualmente, as águas residuais orgânicas são descartadas nos campos e córregos locais. Posteriormente, as algas podem ser consideradas como matéria prima, uma vez que possuem várias utilidades como composto, celulose e biogás. Uma desvantagem desse sistema é que água limpa deve ser usada para obter transparência de água suficiente para permitir o crescimento de algas. Mesmo assim, o sistema de redução de nutrientes dos efluentes orgânicos propostos e amigável ao ecossistema, comparado aos tratamentos terciários que utilizam produtos químicos para precipitar e coletar nutrientes como nitratos e fosfatos.(AU)

Iron Uptake by Fungi Isolated from Arcelor Mittal -Annaba- in the Northeast of Algeria

The Metal pollution is one of the major risks in the world nowadays. Iron is an essential metal for growth and proliferation of a vast majority of organisms, but it can be toxic to human health and other living beings in the environment at high concentrations due to its increased industrial activity. Fungi have a remarkable capacity to uptake and detoxify iron metal using different mechanisms such as bioaccumulation. Thus, the aim of this work is to study the ability of iron uptake by the fungal strains isolated from Arcelor Mittal -Annaba- in Algeria. Three strains were screened at high concentration of iron (1 g/l) and their capacity to uptake iron has been studied on Czapek Yeast Agar medium. The amounts of uptaken iron ions were estimated in the same liquid medium using Atomic Absorption Spectroscopy (AAS). The results of the iron uptake by these screened strains showed that Cladosporium cladosporioides uptakes the highest concentration of iron (347.7 ppm), Aspergillus niger was able to accumulate up to 170 ppm of this metal while, the lowest uptake of this metal was shown by Penicillium citrinum with 106.43 ppm. It was found that the spore germination of three fungal strains was low when the medium is supplemented with high concentrations of iron. This indicated the potential of these fungal strains as biological agents for removal of iron from the industrial effluents containing high concentrations of it.(AU)

Iron Uptake by Fungi Isolated from Arcelor Mittal -Annaba- in the Northeast of Algeria

The Metal pollution is one of the major risks in the world nowadays. Iron is an essential metal for growth and proliferation of a vast majority of organisms, but it can be toxic to human health and other living beings in the environment at high concentrations due to its increased industrial activity. Fungi have a remarkable capacity to uptake and detoxify iron metal using different mechanisms such as bioaccumulation. Thus, the aim of this work is to study the ability of iron uptake by the fungal strains isolated from Arcelor Mittal -Annaba- in Algeria. Three strains were screened at high concentration of iron (1 g/l) and their capacity to uptake iron has been studied on Czapek Yeast Agar medium. The amounts of uptaken iron ions were estimated in the same liquid medium using Atomic Absorption Spectroscopy (AAS). The results of the iron uptake by these screened strains showed that Cladosporium cladosporioides uptakes the highest concentration of iron (347.7 ppm), Aspergillus niger was able to accumulate up to 170 ppm of this metal while, the lowest uptake of this metal was shown by Penicillium citrinum with 106.43 ppm. It was found that the spore germination of three fungal strains was low when the medium is supplemented with high concentrations of iron. This indicated the potential of these fungal strains as biological agents for removal of iron from the industrial effluents containing high concentrations of it.

Effect of row spacing and maturity at harvest on the fermentative profile, aerobic stability, and nutritional characteristics of biomass sorghum (BRS 716) silage in the semiarid region of Brazil

The objective was to evaluate the effects of maturity at harvest and row spacing on fermentative profile, aerobic stability, and nutritional value of biomass sorghum (BRS 716) silage. The experiment was conducted using a split-plot completely randomized block design with three row spacings (45, 70, and 90 cm) and four maturities at harvest (70, 100, 130, and 160 days) and eight replications. Polyvinyl chloride silos of known weight measuring 50 cm length and 10 cm diameter were used for silage production. Dry matter and total carbohydrate contents of the silage increased linearly, whereas crude protein and ash decreased linearly with maturity at harvest. Row spacing did not influence pH, ammoniacal nitrogen (N-NH3 ), gas and effluent losses, and dry matter recovery of silage. The concentrations of malic, succinic, and acetic acids and ethanol responded quadratically to maturity at harvest. The levels of neutral detergent fiber, lignin, and indigestible neutral detergent fiber increased linearly with maturity at harvest. Ruminal degradation kinetics of dry matter of biomass sorghum silage was not influenced by row spacing. BRS 716 biomass sorghum should be planted at 70-cm row spacing and harvested at 160 days for silage production based on fermentative profile, dry matter losses, and nutritional characteristics.

Mesquite pods as a source of soluble carbohydrates in elephant grass silages / Vagens de algaroba como aditivo energético em silagens de capim elefante

The objective of this study was to evaluate the fermentation parameters and chemical composition of elephant grass silage with inclusion of crushed mesquite pods, at the levels of 8, 16, 24 and 32% as a source of soluble carbohydrates, in addition to a control treatment (no mesquite pod). Fermentation parameters were evaluated for gas losses (GL), effluent losses (EL), dry matter recovery (DMR), pH, ammonia nitrogen (NH3-N), and chemical composition related to dry matter (DM), crude protein (CP), neutral detergent fiber (NDF), acid detergent fiber (ADF), hemicellulose (HEM), cellulose (CEL), lignin (LIG) and total digestible nutrients (TDN). A quadratic behavior (p<0.05) was found for GL, with a reduction of 45.58% with 32% inclusion. There was a decrease (p<0.05) in EL (59.22%) and NH3-N (38.21%) and an increase in DMR by 17.57% as the mesquite pod meal was added to the silage. As for the chemical composition, the inclusion of mesquite pod meal promoted increments (p<0.05) of 72.28%, 69.58% and 29.80% for the DM, CP and TDN, respectively, and a decrease in NDF (29.92%) and ADF (31.84%) up to the highest level of inclusion of mesquite pod meal (32%). The inclusion of up to 32% mesquite pod meal in elephant grass silage promotes better fermentation stability in the silo, by reducing losses and increasing the DM content of the ensiled mass, which minimizes nutrient leaching. The use of mesquite pod meal as a source of soluble carbohydrates can also improve the silage chemical composition, increasing the content of CP and TDN, and reducing the content of NDF, ADF and Lignin.

Objetivou-se nesta pesquisa avaliar os parâmetros fermentativos e a composição química da silagem de Capim Elefante com adição de 8, 16, 24 ou 32% de vagens de algaroba trituradas, como fonte de carboidratos solúveis, junto ao tratamento controle (sem vagens). Foram avaliados os parâmetros fermentativos quanto às perdas por gases (PG), perdas por efluentes (PE), recuperação de matéria seca (RMS), pH, nitrogênio amoniacal (N-NH3), e a composição química referente aos teores de matéria seca (MS), proteína bruta (PB), fibra em detergente neutro (FDN), fibra em detergente ácido (FDA), hemicelulose (HEM), celulose (CEL), lignina (LIG) e nutrientes digestíveis totais (NDT). Observou-se comportamento quadrático (p<0,05) para PG, obtendo-se redução de 45,58% nesse parâmetro com 32% de inclusão, em relação ao tratamento controle. Houve decréscimo (p<0,05) nos valores de PE (59,22%) e N-NH3 (38,21%) e acréscimo na RMS de 17,57% conforme a adição das vagens na silagem. Quanto à composição química, a inclusão das vagens promoveu incrementos (p<0,05) de 72,28%, 69,58% e 29,80% para os teores de MS, PB e NDT, respectivamente, e diminuição nos valores de FDN (29,92%) e FDA (31,84%) até o maior de nível de inclusão das vagens (32%). A inclusão de até 32% de vagens de algaroba trituradas em silagem de capim elefante promove melhor estabilidade fermentativa no silo, por redução nas perdas e aumento no teor de MS da massa ensilada, o que minimiza a lixiviação de nutrientes. O uso das vagens como fonte de carboidratos solúveis, também pode melhorar a composição química da silagem, elevando os teores de PB e de NDT, e reduzindo os teores de FDN, FDA e Lignina.

Effect of particle size on storage time of hydrated corn grain / Efeito do tamanho de partícula associado ao tempo de armazenamento do milho moído reidratado

Dry ground corn kernels are widely used as sources of energy readily available for microbial synthesis in the rumen. The objective of the present study was to measure the effect of particle size on the storage length of rehydrated and ensiled corn grain. Commercial corn was milled in 2-, 4-, 6-, 8-, and 10-mm sieves, rehydrated until reaching 65% DM, and ensiled for 14, 28, and 56 days, in a completely randomized design with a 5 x 3 factorial arrangement, with six replications per treatment. PVC mini-silos were used, with dimensions of 25 cm height x 10 cm of diameter. The variables DM, MM, CP, NDF, ADF, pH, molds and yeasts count, fermentative losses, in vitro degradability and aerobic stability were subjected to analysis of variance. The Tukey test was used to compare means. LAB counts was subjected to Wilcoxon's nonparametric test, considering significance at p < 0.05. Rehydrated corn silages with smaller particles (2 and 4 mm) showed higher LAB and mold counts, higher levels of CP and EE and higher density at opening silos than that of coarser particles. However, they showed lower percentages of DM, and were susceptible to microbial attack and faster temperature increases than were coarse particles during the chosen storage times. Silage subjected to 56 days of fermentation showed lower contents of NDF, ADF and CP, lower gas losses and lower pH values in aerobiosis, and increased levels of soluble protein (A + B1 fractions), losses by effluents, number of hours to reach maximum temperature, and time to break aerobic stability. Coarse-grind silages subjected to 56 days of storage showed better chemical composition, lower LAB and mold counts, and less susceptibility to microbial degradation when exposed to air.(AU)

O milho moído seco é um dos ingredientes mais utilizados como fonte de energia rapidamente disponível para a síntese microbiana no rúmen. Objetivou-se avaliar o efeito do tamanho de partícula associada ao tempo de armazenamento sobre o milho moído reidratado e ensilado. Foi realizada a moagem de milho comercial em peneiras de 2, 4, 6, 8 e 10 mm, reidratado até atingir 65 % de MS e ensilado por 14, 28 e 56 dias, num delineamento inteiramente casualizado em arranjo fatorial 5x3, com seis repetições por tratamento. Foram utilizados mini-silos de PVC, de dimensões 25 cm altura x 10 cm diâmetro. Os dados referentes às variáveis MS, MM, PB, FDN, FDA, pH, contagem de bolores e leveduras, perdas fermentativas, degradabilidade in vitro e estabilidade aeróbia foram submetidas à análise de variância e o teste Tukey para comparação de médias, e a contagem de BAL foi submetida ao teste não-paramétrico de Wilcoxon, ambos considerando significância 5%. Silagens de grãos milho reidratados com partículas menores (2 e 4 mm) apresentaram maiores contagens de BAL e bolores, teores mais elevados de PB, EE e maior massa específica na abertura dos silos em relação às partículas mais grossas. Porém, demonstraram menores percentuais de MS, e foram passíveis de ataque microbiano e elevação de temperatura mais rapidamente do que partículas grossas durante os tempos de armazenamento avaliados. Silagens armazenadas por 56 dias apresentaram menores teores de FDN, FDA e PB, menores perdas por gases e menores valores de pH em aerobiose, e aumentaram a proteína solúvel (frações A + B1), as perdas por efluentes e o tempo para quebra da estabilidade aeróbia das silagens. Silagens com moagem grossa e submetidas a 56 dias de armazenamento apresentaram melhor composição bromatológica, menores contagens de BAL e bolores, e menor susceptibilidade à degradação microbiana quando expostas ao ar.(AU)