Periodontal therapy for hopeless mandibular anterior teeth: a retrospective case report with a multidisciplinary approach and a 20-year follow-up

Introduction: This case report presents the intentional periodontal maintenance of two periodontal hopeless lower central incisors with a multidisciplinary approach and 20-year follow-up. Case presentation: A 36-year-old male, in 2001, was diagnosed with aggressive periodontitis, gingival swelling, bleeding, and mandibular central incisors with mobility and poor prognosis. Following periodontal therapy (phase I), root canal treatment, and occlusal adjustment, #31 and #41 were gently extracted to remove the granulation tissues, calculus, and infected cementum from the root surface. Then, tetracycline-HCl was applied for 5 minutes on the root surfaces. The teeth were repositioned into the sockets and splinted with a lingual bar. At 3 months, the bar was removed, and a free gingival autogenous graft was done to improve the local keratinized tissue width. Mobility scores, pocket depths, and clinical attachment levels were recorded, and radiographs were taken at 1, 5, and 20 years. The 5-year follow-up showed that the teeth were clinically and radiographically in function. There was a reduction in probing depth and a gain in clinical attachment and radiographic alveolar bone levels. After 20 years, #41 was stable, but #31 had external root resorption, leading to a new treatment plan (dental implants) and extraction. Conclusion: The clinical result of this case was satisfactory for 20 years. Intentional periodontal maintenance of the teeth may be an alternative treatment, even considering the high level of complexity.

Virtual planning as a resource for correcting severe facial asymmetry ­ case report / Planejamento virtual como recurso para correção de assimetria facial severa ­ relato de caso

A hiperplasia hemimandibular é responsável por prejuízos estéticos, funcionais, motores e psicossociais. Com etiologia incerta, ocorre frente ao desequilíbrio de fatores regulatórios de crescimento presentes na camada cartilaginosa do côndilo. O relato objetiva descrever a tomada de decisões baseada em exames complementares específicos aliados à adequada intervenção cirúrgica da lesão. Paciente gênero feminino, 33 anos de idade, compareceu à clínica particular com queixa principal de "face assimétrica", foi requerido uma avaliação cintilográfica objetivando e confirmando a interrupção do crescimento condilar, descartando a hipótese de Osteocondroma e condilectomia. Após preparo ortodôntico prévio, os exames tomográficos foram utilizados na criação de um protótipo que foi impresso após a realização dos movimentos ósseos planejados. Mediante à reconstrução, foi concluído que a assimetria presente não seria totalmente corrigida somente através da intervenção ortognática, sendo necessária também uma osteotomia removendo parte da base do corpo e ângulo mandibular, através da confecção de um guia de corte, promovendo à reanatomização sem a necessidade de acesso extra oral submandibular, evitando uma cicatriz em face feminina. Paciente encontra-se em pós-operatório de 60 meses, sem queixas e satisfeita. Portanto, é evidenciado cada vez mais a influência positiva que o planejamento virtual pode trazer aos profissionais na otimização dos resultados cirúrgicos.

Hemimandibular hyperplasia is responsible for aesthetic, functional, motor, and psychosocial impairments. With an uncertain etiology, it occurs due to the imbalance of regulatory growth factors present in the cartilaginous layer of the condyle. The report aims to describe decision-making based on specific complementary exams combined with the appropriate surgical intervention for the condition. A 33-year-old female patient presented at a private clinic with the main complaint of "asymmetric face." A scintigraphic evaluation was requested to objectively confirm the interruption of condylar growth, ruling out the hypothesis of Osteochondroma and condylectomy. After prior orthodontic preparation, tomographic exams were used to create a prototype that was printed after planned bone movements. Through the reconstruction, it was concluded that the existing asymmetry would not be entirely corrected through orthognathic intervention alone, necessitating also an osteotomy to remove part of the base of the body and mandibular angle. This was done through the creation of a cutting guide, allowing for reanatomization without the need for submandibular extraoral access, thus avoiding a scar on the female face. The patient is 60 months postoperative, with no complaints and satisfied. Therefore, the increasingly positive influence of virtual planning on optimizing surgical outcomes for professionals is evident.

Percepção profissional sobre tratamento endodôntico em sessão única e múltiplas sessões / Professional perception of single and multi-session endodontic treatment

Na odontologia a decisão do tratamento é exclusiva dos cirurgiões dentistas e suas percepções, incluindo filosofia de tratamento, fazendo com que a prática de novos conceitos, tratamentos ou técnicas dependam não apenas de sua lógica ou eficácia biológica. Sendo assim, este estudo teve como objetivo avaliar os parâmetros envolvidos na tomada de decisão de cirurgiões dentistas clínicos e especialistas para a realização do tratamento endodôntico em sessão única ou múltiplas sessões. Para tanto, este estudo contou com uma coleta de dados através de um questionário online, aplicado cirurgiões dentistas clínicos gerais e especialistas em endodontia. As respostas foram tabuladas e analisadas por meio de estatística descritiva. Os resultados revelaram que a maioria dos endodontistas e dos clínicos gerais prefere realizar tratamento endodôntico em sessão única, devido ao menor desperdício de material, além do melhor domínio da anatomia e tratamento em um único momento. O motivo mais comum para os endodontistas e clínicos gerais escolherem o tratamento com múltiplas visitas é para dentes com prognóstico duvidoso e os casos em que o profissional aguarda a remissão dos sintomas antes da obturação. Em conclusão, a maioria dos endodontistas e dos clínicos gerais preferiu realizar tratamento endodôntico em sessão única.

In dentistry, treatment decisions are made exclusively by dental surgeons and their perceptions, including treatment philosophy, which means that the practice of new concepts, treatments or techniques depends not only on their logic or biological efficacy. Therefore, the aim of this study was to evaluate the parameters involved in clinical and specialist dental surgeons' decision to carry out endodontic treatment in single or multiple sessions. To this end, data was collected using an online questionnaire administered to general dental surgeons and endodontic specialists. The answers were tabulated and analyzed using descriptive statistics. The results revealed that the majority of endodontists and general practitioners prefer to carry out endodontic treatment in a single session, due to less wastage of material, as well as better mastery of the anatomy and treatment at a single time. The most common reason for endodontists and general practitioners to choose treatment with multiple visits is for teeth with a doubtful prognosis and cases in which the professional is waiting for symptoms to remit before filling. In conclusion, the majority of endodontists and general practitioners preferred to carry out endodontic treatment in a single session.

Práticas integrativas e complementares de saúde em Sergipe / Integrative and complementary health practices in Sergipe

A atenção primária em saúde (APS) é o primeiro nível de atenção em saúde, sendo um elo entre a população e o setor de saúde. Tem-se buscado a humanização dos atendimentos, e essa mudança, refletida pelas mudanças da sociedade, trouxe a implementação da Política Nacional de Práticas Integrativas e Complementares (PNPIC) no SUS. O objetivo deste trabalho foi realizar uma análise da tendência da quantidade das práticas integrativas e complementares realizadas nas regionais de saúde de Sergipe de 2017 a 2023, associando com a cobertura da atenção primária. Foi realizada análise de dados secundários através do Departamento de Informática do Sistema Único de Saúde (DATASUS), como forma de organização no período de junho/2015 a junho/2023 por regional de saúde de Sergipe. As análises dos dados foram descritivas e de correlação e por meio de análise de série temporal. A regional de saúde de Lagarto foi a que mais executou as práticas integrativas e complementares no período analisado e algumas regionais não tiveram continuidade na realização destas práticas. A regional de saúde com maior cobertura de APS foi Itabaiana. Não foi possível observar associação entre o número de práticas e a cobertura de atenção primária. Com o intuito de que o atendimento aos indivíduos seja cada vez mais humanizado, e em virtude da realização das práticas integrativas ter baixo índice ou descontinuidade em algumas regiões de Saúde de Sergipe, é relevante que os profissionais de saúde busquem conhecimentos sobre essas práticas, como também, os gestores em saúde incentivem esta ação.

Primary health care (PHC) is the first level of health care, being a link between the population and the health sector. The aim has been to humanize care, and this change, reflected by changes in society, has led to the implementation of the National Policy on Integrative and Complementary Practices (PNPIC) in the SUS. The objective of this work was to carry out an analysis of the trend in the number of integrative and complementary practices carried out in the health regions of Sergipe from 2017 to 2023, associating it with primary care coverage. Secondary data analysis was carried out through the Department of Informatics of the Unified Health System (DATASUS), as a form of organization from June/2015 to June/2023 by health region in Sergipe. Data analyzes were descriptive and correlational and through time series analysis. The Lagarto health region was the one that carried out the most integrative and complementary practices in the period analyzed and some regions did not continue to carry out these practices. The health region with the highest PHC coverage was Itabaiana. Observing an association between the number of practices and primary care coverage was impossible. With the aim that care for individuals is increasingly humanized, and because the implementation of integrative practices has a low rate or discontinuity in some Health regions of Sergipe, health professionals must seek knowledge about these practices as well as health managers encourage this action.

Uso do laser de baixa potência para o tratamento de parestesia: uma revisão de literatura / Use of low-level laser to treat paresthesia: a literature review

Introdução: A parestesia é uma neuropatia que afeta a função sensorial. O Laser de Baixa Potência (LBP), por sua vez, apresenta propriedades analgésicas, bioestimuladoras e reparadoras. Objetivo: Realizar um levantamento na literatura científica sobre os aspectos gerais e benefícios do LBP no manejo terapêutico da parestesia, além de identificar a classificação e métodos de obtenção do diagnóstico desta condição. Materiais e Métodos: Tratou-se de uma revisão narrativa da literatura através da busca nas plataformas PubMed, SciELO, LILACS e Google Schoolar. Após o cruzamento dos descritores com os operadores booleanos e aplicação dos critérios de inclusão/exclusão, 26 estudos foram incluídos. Resultados: A parestesia pode ser classificada em neuropraxia, axonotmese e neurotmese, subdivididas em Grau I ao V. Seu diagnóstico pode ser executado através de testes subjetivos e objetivos. O LBP compreende em um dispositivo tecnológico com efeitos analgésico, anti-inflamatório e fotobiomodulador, que estimula o reparo neural. Os estudos mostram que a dosimetria nos comprimentos de onda vermelho e infravermelho, aplicação intra e extra oral, e com mais de uma sessão semanal exerce efeito modulatório positivo do reparo neural, com retorno progressivo da atividade sensitiva. Além disso, os estudos trazem uma ampla variação no número de pontos de aplicação, bem como no tempo de irradiação e quantidade de sessões, em virtude da extensão e tempo de diagnóstico da parestesia. Considerações finais: Apesar da alta complexidade da parestesia, o LBP exerce efeitos benéficos através do retorno da sensibilidade parcial ou total, além de ser um dispositivo bem tolerado pelo organismo e minimamente invasivo.

Introduction: Paresthesia is a neuropathy that affects sensory function. The Low-Level Laser (LLL), in turn, has analgesic, biostimulating and reparative properties. Purpose: Carry out a survey at the scientific literature on the general aspects and benefits of LLL in the therapeutic management of paresthesia in addition to identifying the classification and methods for obtaining a diagnosis of this condition. Materials and Methods: It was a narrative literature review through search in platforms PubMed, SciELO, LILACS and Google Schoolar. After crossing the descriptors with boolean operators and applying the inclusion/exclusion criteria, 26 articles were included in this study. Results: Paresthesia can be classified into neuropraxia, axonotmesis and neurotmesis, subdivided into Grades I to V. Its diagnostic can be carried out through subjective and objective tests. The LLL consists in a technological device with analgesic, anti-inflammatory and photobiomodulatory effects, which stimulates neural repair. Studies show that LLL in dosimetry at red and infrared wavelengths with intra and extra oral application and with more than one-week use exerts a positive modulatory effect on neural repair, with a progressive return of sensory activity. Furthermore, the studies show a wide variation in the number of application points, as well as the irradiation time and number of sessions, due to the extent and time of diagnosis of paresthesia. Final Considerations: Despite the high complexity of paresthesia, the LLL has beneficial effects through the return of partial or total sensitivity in addition being a device well tolerated by the body and minimally invasive.

Análise do diâmetro de cones acessórios calibrados por réguas calibradoras / Diameter analysis of accessory cones calibrated by calibrating rulers

O objetivo do presente estudo foi de comparar o diâmetro dos cones acessórios FM EL calibrados por duas réguas calibradoras com seus respectivos diâmetros nominais. Foram calibrados 80 cones de guta percha FM EL (Odous de Deus) utilizando duas réguas calibradoras das seguintes marcas: Prisma e Denco. Os cones foram divididos em 8 grupos (n=10) de acordo com a régua e com o diâmetro em que foram calibrados. Posteriormente, os cones foram fotografados e tiveram seus D0 mensurados através do software ImageJ. Após a realização da análise estatística utilizando-se os testes de Normalidade de Shapiro-Wilk e o teste t Student (Distribuição Normal), obteve-se os seguintes resultados: não houve diferença estatisticamente significativa com o valor de referência na régua prisma nos cones 40, isto é, em todas as outras situações encontrou-se diferença com os valores de referência. Quando foram comparados os valores das medianas e desvio padrão das duas réguas calibradoras também houve diferença estatisticamente significativa (p<0,05) nos cones 25, 35 e 40. Os cones acessórios FM EL (Odous de Deus) calibrados com a régua Denco diferiram dos diâmetros nominais da régua. Assim, deve-se estar atento à exatidão e precisão desses instrumentos a fim de se evitar possíveis erros de mensuração e interpretação capazes de comprometer o êxito da obturação no tratamento endodôntico.

The aim of the present study was to compare the diameter of the FM EL accessory cones calibrated by two calibrating rulers with their respective nominal diameters 80 FM EL gutta percha cones (Odous of God) were calibrated using two calibrating culers of the following brands: Prisma and Denco. The cones were divided in 8 groups (n=10) according to the ruler and the diameter in which they were calibrated. Posteriorly, the cones were photographed and nad their D0 neasured through the software ImageJ. After performing the statistical analysis using the Shapiro- Wilk Normality tests and the Student T test (Normal Distribution), the following results were obtained: there was no stastistically significant difference with the reference value in the prism rule in the cones 40, that is, in all other situations, a difference was found with the reference values. When the median values and standard deviation of the two calibrating rulers were compared, there was also a statistically significant difference (p<0,05) in cones 25, 35 and 40. The FM EL (Odous of God) accessory cones calibrated eita the Denco ruler differed from the nominal diameters of the ruler. Thus, one must pay attention to the accuracy and precision of these instruments in order to avoid possible errors of measurement and interpretation capable of compromising the success of filling in endodontic treatment.

Capacidade terapêutica da fitoterapia na odontologia: uma análise abrangente das proteínas antimicrobianas, anti-inflamatórias e reparadoras / Therapeutic capacity of phytotherapy in dentistry: a comprehensive analysis of antimicrobial, anti-inflammatory, and reparative properties

Introdução: A fitoterapia se baseia na utilização de plantas medicinais, através de diferentes formulações farmacêuticas com fins terapêuticos. Na Odontologia, os fitoterápicos têm sido alvo de estudos, devido suas propriedades benéficas, além de apresentarem biocompatibilidade, baixo custo e fácil acesso. Objetivo: Realizar um levantamento na literatura científica sobre a utilização da fitoterapia na Odontologia, com vistas aos efeitos antimicrobiano, anti-inflamatório e reparador. Material e Métodos: A busca ocorreu entre fevereiro a julho/2023, nas bases PubMed e LILACS, além de livre busca, cruzando-se os descritores "Phytotherapy", "Dentistry", "Anti-inflamatory Agents", "Anti-Infective Agents", "Wound Healing", "Fitoterapia", "Odontologia", "Anti-inflamatório", "Antimicrobiano" e "Cicatrização". Após leitura inicial, seguida da análise crítica com aplicação dos critérios estabelecidos, foram selecionadas 50 referências. Desenvolvimento: Diversas plantas são empregadas sob a forma de fitoterapia, como Aloe vera (babosa), Matricaria recutita (camomila), Copaifera (copaíba), Punica granatum (romã), Uncaria tomentosa (unha-de-gato), Malva sylvestris (malva), Althaea officinalis (malvaísco), Myracrodruon urundeuva (Aroeira), Lippia sidoides (Alecrim pimenta) e Glycyrrhiza glabra (Alcaçuz). Na Odontologia, pesquisas evidenciaram resultados satisfatórios para o tratamento de afecções da cavidade oral, especialmente com caráter inflamatório e infeccioso, além de aclerar a cicatrização. Esses achados apontam que a fitoterapia é um tratamento eficaz, acessível e com mínimos efeitos colaterais. Considerações finais: Com base na literatura revisada, a fitoterapia parece ser uma alternativa promissora no tratamento de afecções orais, devido aos seus notáveis efeitos cicatrizantes, antimicrobianos e anti-inflamatórios. Contudo, mais pesquisas com metodologias adequadas são necessárias para que se estabeleçam protocolos clínicos seguros e eficazes.

Introduction: Phytotherapy is based on the use of medicinal plants through different pharmaceutical formulations for therapeutic purposes. In Dentistry, phytotherapeutics have been the subject of studies due to their beneficial properties, as well as their biocompatibility, low cost, and easy accessibility. Objective: To conduct a literature review on the use of phytotherapy in Dentistry, focusing on antimicrobial, anti-inflammatory, and reparative effects. Materials and Methods: The search took place between February and July 2023, using PubMed and LILACS databases, in addition to a free search, crossing the descriptors "Phytotherapy," "Dentistry," "Anti-inflammatory Agents," "Anti-Infective Agents," "Wound Healing," "Fitoterapia," "Odontologia," "Anti-inflammatory," "Antimicrobial," and "Cicatrização." After an initial reading, followed by critical analysis with the application of established criteria, 50 references were selected. Development: Various plants are employed in phytotherapy, such as Aloe vera (aloe), Matricaria recutita (chamomile), Copaifera (copaiba), Punica granatum (pomegranate), Uncaria tomentosa (cat's claw), Malva sylvestris (mallow), Althaea officinalis (marshmallow), Myracrodruon urundeuva (Brazilian copaiba), Lippia sidoides (rosemary pepper), and Glycyrrhiza glabra (licorice). In Dentistry, research has shown satisfactory results for the treatment of oral cavity conditions, especially those with inflammatory and infectious characteristics, as well as accelerating healing. These findings suggest that phytotherapy is an effective, accessible treatment with minimal side effects. Final considerations: Based on the reviewed literature, phytotherapy appears to be a promising alternative in the treatment of oral conditions due to its notable healing, antimicrobial, and anti-inflammatory effects. However, more research with appropriate methodologies is necessary to establish safe and effective clinical protocols.

Sedação consciente com óxido nitroso em clínica odontológica: principais indicações e segurança / Concious sedation with nitrous oxide in dental clinics: main indications and safety

A ansiedade desempenha um papel significativo na experiência de tratamentos odontológicos e pode resultar em evasão por parte dos pacientes. Isso é especialmente relevante para grupos como pacientes pediátricos e aqueles com necessidades especiais, que muitas vezes requerem técnicas de controle de comportamento ou sedação devido à ansiedade. No entanto, a ansiedade não deve ser negligenciada mesmo em pacientes sem odontofobia grave, pois está relacionada à percepção da dor durante os procedimentos odontológicos. A sedação consciente com óxido nitroso surge como uma alternativa valiosa para reduzir a ansiedade e melhorar o conforto do paciente. Ao contrário dos benzodiazepínicos e da anestesia geral, o óxido nitroso atua no sistema nervoso de uma forma que deprime levemente o córtex cerebral, sem afetar o centro respiratório. Isso permite o uso de concentrações subanestésicas do gás, administradas com oxigênio por meio de uma máscara nasal. O óxido nitroso é de rápida ação, pouco solúvel e tem um período de recuperação breve, permitindo que os pacientes retornem rapidamente às atividades normais. Este estudo, uma revisão de literatura, explora o mecanismo de ação do óxido nitroso, suas indicações na prática odontológica e examina possíveis riscos e contraindicações associados ao seu uso. Em resumo, a sedação consciente com óxido nitroso se mostra como uma opção promissora para aliviar a ansiedade e melhorar a experiência de tratamentos odontológicos, beneficiando uma ampla gama de pacientes, não apenas aqueles com fobias graves.

Anxiety, in an outpatient dental environment, plays a fundamental role in pain and discomfort expectation, resulting in increase of treatment evasion. The groups that present greater difficulty in cooperation are children and special needs patients, with behavioral control and sedation being often necessary. Nevertheless, literature emphasizes that anxiety must be evaluated as a critical stage and its management done not only in patients with elevated anxiety levels, but being crucial on pain control of every dental patient, since higher grades of restlessness equals higher pain perception. It is known that the use of nitrous oxide in conscious sedation proves to be an useful tool on reducing anxiety and enabling comfortable interventions, indicating that it is an alternative to the use of benzodiazepines and general anesthesia. The drug acts on the nervous system, promoting a slight depression of the cerebral cortex and, unlike benzodiazepines, which act at the medulla level, it does not depress the respiratory center. The technique uses sub-anesthetic concentrations of nitrous oxide delivered with oxygen through a nasal mask. Nitrous oxide is poorly soluble and has a rapid onset of action, being therefore associated with a rapid recovery period. The duration of sedation is controlled and the patient can quickly return to normal activities. This paper is a narrative review with the objective of exploring the mechanism of action of this gas, evaluating its indications for use in dental clinic and verifying possible risks and contraindications.

Color variations in PMMA acrylic resins after thermocycling and mouthwash simulation / Variações de cor em resinas acrílicas de PMMA após termociclagem e simulação de enxaguatório bucal

Estabilidade de cor é um requisito estético fundamental das resinas acrílicas provisórias, em especial quando esses materiais são submetidos a longos períodos na cavidade oral. Embora resinas acrílicas temporárias novas e aprimoradas estejam disponíveis, os efeitos da variação térmica e de soluções antissépticas na estabilidade de cor de resinas acrílicas provisórias ainda não foram completamente elucidados. Portanto, este estudo avaliou a coloração de resinas autopolimerizáveis polimetilmetacrilato (PMMA) e bis-acrilo submetidas à termociclagem e imersão em clorexidina. Amostras padronizadas (n=10) foram preparadas de duas resinas acrílicas temporárias a base de PMMA (Alike® e Duralay®). Foram realizadas três avaliações de cor (T1 ­ 24h após o preparo da amostra, T2 ­ após termociclagem e T3 ­ após termociclagem e imersão em clorexidina) por meio de espectrofotômetro eletrônico de seleção de sombra (Vita Easy Shade). Os dados obtidos foram analisados por ANOVA e teste t (α=0,05). As resinas de PMMA Alike e Duralay apresentaram alteração de cor após a termociclagem e também após a imersão em clorexidina.

Color stability is a fundamental aesthetic requirement for temporary acrylic resins, especially when these materials are subjected to long periods in the oral cavity. Although new and improved temporary acrylic resins are available, the effects of thermal variation and antiseptic solutions on the color stability of temporary acrylic resins have not yet been fully elucidated. Therefore, this study evaluated the color of self-polymerizing resins polymethyl methacrylate (PMMA) and bis-acryl subjected to thermocycling and immersion in chlorhexidine. Standardized samples (n=10) were prepared from two PMMA-based temporary acrylic resins (Alike® and Duralay®). Three color evaluations were carried out (T1 ­ 24h after sample preparation, T2 ­ after thermocycling and T3 ­ after thermocycling and immersion in chlorhexidine) using an electronic shade selection spectrophotometer (Vita Easy Shade). The data obtained were analyzed by ANOVA and t test (α=0.05). PMMA Alike and Duralay resins showed color changes after thermocycling and also after immersion in chlorhexidine.

Desafios e mudanças no processo de trabalho das equipes de saúde da família no cenário pandêmico: relato de experiência / Challenges and changes in the work process of family health teams in the pandemic scenario: experience report

O presente estudo tem por objetivo realizar um relato de experiência demonstrando a percepção de discentes do curso de odontologia na sua participação na prática da atenção primária à saúde (APS), vivenciadas em um cenário pandêmico e com base no combate a enfrentamentos e desafios impostos no processo de trabalho das equipes de saúde da família. Este estudo trata - se de relato de experiência, de caráter descritivo e retrospectivo, associado à uma pesquisa bibliográfica para que trousse o embasamento teórico necessário para a descrição do relato de experiência vivenciado. No decorrer da pandemia, a Equipe de saúde da família exerceu importante papel e atuou na linha de prevenção e controle desta, sendo uma das maiores ferramentas de apoio. Na odontologia, a atuação da equipe de saúde bucal devido a fatores de risco inerentes à esta modalidade de ocupação, ficou limitada em seu exercício. O conhecimento de muitos dos profissionais da rede pública foi colocado em questão, assim como sua vivência, limitações e o medo de contrair a doença. Os profissionais da equipe de saúde, mostraram que o trabalho interprofissional e um bom relacionamento aumentou o incentivo e a responsabilidade de equipe.

This study aims to carry out an experience report demonstrating the perception of students of the dentistry course in their participation in the practice of primary health care (PHC), experienced in a pandemic scenario and based on the fight against confrontations and challenges imposed on the work process of family health teams. This study is an experience report, descriptive and retrospective, associated with bibliographical research to bring the necessary theoretical basis for the description of the lived experience report. During the pandemic, the Family Health Team played an important role and acted in the line of prevention and control of this, being one of the greatest support tools. In dentistry, the performance of the oral health team, due to risk factors inherent to this type of occupation, was limited in its exercise. The knowledge of many public health professionals was questioned, as well as their experience, limitations and fear of contracting the disease. Health team professionals showed that interprofessional work and a good relationship increased team incentive and responsibility.

O emprego da moldagem digital na prática odontológica - relato de caso / The use of digital molding in dental practice ­ case report

O avanço da tecnologia de digitalização de imagens e desenvolvimento de dispositivos de fresagem possibilitaram a otimização de diversos processos na Odontologia. O emprego do escaneamento intraoral e do sistema CAD-CAM (CAD - Computer Aided Design; CAM - Computer Aided Manufacturing) aprimorou a realização de reabilitações protéticas, permitindo a obtenção de peças de alta qualidade em tempo reduzido. O objetivo deste trabalho é relatar um caso de reabilitação de um incisivo central inferior a partir de escaneamento intraoral, com scanner Omnicam (DentsplySirona Charlotte, NC, EUA) e aplicação do sistema CAD-CAM.

The advancement of image digitization technology and the development of milling devices have made it possible to optimize various processes in Dentistry. The use of intraoral scanning and the CAD-CAM system (CAD - Computer Aided Design; CAM - Computer Aided Manufacturing) has improved the performance of prosthetic rehabilitations, allowing the obtaining of high quality parts in a reduced time. The objective of this work is to report a case of rehabilitation of a lower central incisor using intraoral scanning, with an Omnicam scanner (Dentsply Sirona) and application of the CAD-CAM system.

Lysozyme antimicrobial activity against Enterococcus Faecalis ­ a pilot study / Atividade antimicrobiana da lisozima contra Enterococcus Faecalis ­ um es-tudo piloto

O preparo químico-mecânico (PQM) do sistema de canais radiculares é essencial para eliminar tecidos infectados e garantir uma desinfecção adequada. O Hidróxido de Cálcio (HC) combinado com o propilenoglicol é frequentemente utilizado como uma pasta intracanal para desinfecção e medicação intraoperatória. No entanto, algumas bactérias, como o Enterococcus faecalis (E. faecalis), podem resistir aos efeitos do hidróxido de cálcio. O Ultracal® é uma medicação de hidróxido de cálcio de alta qualidade e radiopaco usado em procedimentos endodônticos. Já a lisozima é uma substância com propriedades antimicrobianas encontrada em várias partes do corpo humano e tem sido estudada como uma opção promissora para o tratamento de infecções endodônticas. O objetivo do presente estudo foi avaliar e comparar a atividade antimicrobiana do HC com propilenoglicol, Ultracal® e Lisozima contra E. faecalis. Foram realizadas escavações em placas de petri contaminadas com E. faecalis. Após, foi adicionado as medicações intracanais e as placas foram levadas a estufa a 37°C em aerobiose. Os halos de inibição formados foram medidos em 2, 4 e 7 dias. HC apresentou halos de inibição maiores quando comparado as outras medicações e com maior crescimento com o passar dos dias. A lisozima apresentou apenas ação nas primeiras 48 horas, perdendo seu efeito após esse período. Ambas as medicações com hidróxido de cálcio apresentaram valores crescentes. Baseado nos resultados obtidos, conclui-se que as medicações a base de hidróxido de cálcio demonstraram melhor ação contra E. faecalis em ação direta.

The chemical-mechanical preparation (CMP) of root canals system is essential to eliminate infected tissues and ensure adequate disinfection. Calcium hydroxide (CH) combined with propylene glycol is often used as an intracanal medication for intraoperative disinfection and medication. However, some bacteria, such as Enterococcus faecalis (E. faecalis), may resist the effects of calcium hydroxide. Ultracal® is a high-quality radiopaque calcium hydroxide medication used in endodontic procedures. Lysozyme, on the other hand, is a substance with antimicrobial properties found in various parts of the human body and has been studied as a promising option for the treatment of endodontic infections. The aim of this study was to evaluate and compare the antimicrobial activity of CH with propylene glycol, Ultracal®, and Lysozyme against E. faecalis. Petri plates contaminated with E. faecalis were excavated, intracanal medications were added, and the plates were incubated at 37°C in aerobic conditions. The inhibition halos formed were measured at 2, 4, and 7 days. CH showed larger inhibition halos compared to the other medications and exhibited increased growth over the days. Lysozyme showed activity only in the first 48 hours, losing its effect after this period. Both medications with calcium hydroxide showed increasing values. Based on the results obtained, it is concluded that calcium hydroxide-based medications demonstrated better action against E. faecalis in direct action.

Etiopatogenia e tratamento da osteonecrose dos maxilares induzida por medicamentos: aspectos essenciais ao dentista / Etiopathogenesis and treatment of medication-related osteonecrosis of the jaw: essential aspects for the dentist

A osteonecrose dos maxilares induzida por medicamentos (MRONJ) caracteriza-se por exposição óssea ou osso que pode ser sondado através de fístula intra ou extraoral, em região maxilofacial, e que não cicatriza dentro de oito semanas. A MRONJ é uma condição rara e debilitante que pode causar dor, disfagia e odor desagradável na cavidade oral, afetando pacientes com histórico ou sob uso contínuo de terapia antirreabsortiva, isolada ou associada a imunomoduladores ou drogas antiangiogênicas, mas sem histórico de radioterapia nos maxilares. O objetivo desta revisão narrativa de literatura é compilar os principais aspectos sobre a etiopatogenia da MRONJ e as opções terapêuticas disponíveis. A etiologia da MRONJ é multifatorial, complexa, e não está totalmente compreendida, não havendo um tratamento definitivo, mas diversas modalidades terapêuticas que visam o controle da dor e da progressão da osteonecrose. Conclui-se com essa revisão que o entendimento da etiopatogenia da MRONJ pelo cirurgião-dentista lhe permite adotar medidas preventivas, bem como o conhecimento das modalidades terapêuticas disponíveis lhe possibilita oferecer o manejo adequado para seu paciente, conforme o estágio da doença.

Medication-related osteonecrosis of the jaw (MRONJ) is characterized by exposed bone or bone that can be probed through an intra or extraoral fistula, in the maxillofacial region, which does not heal within eight weeks. MRONJ is a rare and debilitating condition that can cause pain, dysphagia and unpleasant odor in the oral cavity, affecting patients with a history or continuous use of antiresorptive therapy, alone or associated with immunomodulators or antiangiogenic drugs, but without a history of radiotherapy to the jaws. The aim of this narrative literature review is to compile the main aspects about the etiopathogenesis of MRONJ and the available therapeutic options. The etiology of MRONJ is multifactorial, complex, and is not fully understood, with no definitive treatment, but several therapeutic modalities that aim to control pain and the progression of osteonecrosis. It is concluded from this review that the understanding of the etiopathogenesis of MRONJ by the dental surgeon allows him to adopt preventive measures, as well as the knowledge of the therapeutic modalities available allows him to offer the appropriate management for his patient, depending on the stage of the disease.

Percepção de aprendizagem on-line na disciplina de Biomateriais / Perception of online learning in the biomaterials course

Com as universidades fechadas e a implementação do Ensino Remoto Emergencial, as atividades curriculares ocorreram através de plataformas digitais. O objetivo do presente trabalho foi avaliar a percepção de aprendizagem on-line na disciplina de Biomateriais da Faculdade de Odontologia da Universidade Federal Fluminense no período da pandemia. O questionário COLLES (Constructivist OnLine Learning Environment Survey) foi enviado individualmente por e-mail aos cinquenta alunos, apresentando 24 declarações divididas em seis quesitos: relevância, reflexão crítica, interatividade, apoio dos tutores, apoio entre os colegas e compreensão; e para cada declaração cinco opções de resposta: quase sempre, frequentemente, algumas vezes, raramente e quase nunca. Quarenta e um alunos responderam. A soma das médias obtidas em quase sempre e frequentemente foi de 87,2% para relevância, 70% para reflexão crítica, 33,9% para interatividade, 47,6% para apoio dos tutores, 44,2% para apoio dos colegas e 89,5% para compreensão. Concluiu-se que a relevância, a reflexão crítica e a compreensão apresentaram melhores resultados, enquanto a interatividade, o apoio entre os colegas e o apoio dos tutores demonstraram necessidade de aprimoramento. E apesar das limitações do ERE, a avaliação positiva dos alunos evidenciou esta modalidade de educação on-line como uma solução plausível.

With universities closed and the implementation of Emergency Remote Teaching, curricular activities took place through digital platforms. The objective of this study was to assess the perception of online learning in the Biomaterials course at the Dental School of the Federal Fluminense University during the pandemic. The COLLES questionnaire (Constructivist OnLine Learning Environment Survey) was individually sent via email to fifty students, presenting 24 statements divided into six aspects: relevance, critical reflection, interactivity, tutor support, peer support, and comprehension. For each statement, there were five response options: almost always, often, sometimes, rarely, and almost never. Forty-one students responded. The sum of the averages obtained for almost always and often was 87.2% for relevance, 70% for critical reflection, 33.9% for interactivity, 47.6% for tutor support, 44.2% for peer support, and 89.5% for comprehension. It was concluded that relevance, critical reflection, and comprehension showed better results, while interactivity, peer support, and tutor support demonstrated a need for improvement. Despite the limitations of Emergency Remote Teaching, the positive evaluation from the students highlighted this mode of online education as a plausible solution.

Extraction of terminal ileal lipomas to cecum can facilitate endoscopic resection: A case series with video.

Large ileal lipomas over 2 cm can cause symptoms, that may require a resection. Due to the narrow lumen and thin walls of the ileum, endoscopic treatments can have a high risk of adverse events and require technical expertise, thus surgical resection is currently the mainstay of treatment. To overcome the technical challenges, we developed a novel method to endoscopically resect terminal ileal lipomas. The technique involves extracting the lesion into the cecum, which creates sufficient space to maneuver, and a better field of view. The lipoma is resected with endoscopic mucosal resection or endoscopic submucosal dissection. The appearance of the lipoma protruding out of the ileocecal valve resembles that of a tongue sticking out of the mouth, thus we named this the "tongue out technique". To assess the technical feasibility of this method, we retrospectively analyzed seven cases of terminal ileal lipoma that were endoscopically resected using the "tongue out technique" at NTT Medical Center Tokyo between January 2017 and October 2023. Technical success was 100% and en bloc resection was achieved in all cases. The median size was 31 (14-55) mm. Three cases were resected with endoscopic mucosal resection while endoscopic submucosal dissection was performed on the other four cases. There was one case of delayed post-endoscopic mucosal resection bleeding, which was caused by clip dislodgement. There were no perforations. No recurrence of the lipoma or associated symptoms have been observed. This new technique can allow more ileal lipomas to be treated with minimally invasive and organ-preserving endoscopic procedures.

Application of FTIR two-dimensional correlation spectroscopy (2D-COS) analysis in characterizing environmental behaviors of microplastics: A systematic review.

Microplastics (MPs) are ubiquitous in the environment, continuously undergo aging processes and release toxic chemical substances. Understanding the environmental behaviors of MPs is critical to accurately evaluate their long-term ecological risk. Generalized two-dimensional correlation spectroscopy (2D-COS) is a powerful tool for MPs studies, which can dig more comprehensive information hiding in the conventional one-dimensional spectra, such as infrared (IR) and Raman spectra. The recent applications of 2D-COS in analyzing the behaviors and fates of MPs in the environment, including their aging processes, and interactions with natural organic matter (NOM) or other chemical substances, were summarized systematically. The main requirements and limitations of current approaches for exploring these processes are discussed, and the corresponding strategies to address these limitations and drawbacks are proposed as well. Finally, new trends of 2D-COS are prospected for analyzing the properties and behaviors of MPs in both natural and artificial environmental processes.

Immobilization of laccase on magnetic PEGDA-CS inverse opal hydrogel for enhancement of bisphenol A degradation in aqueous solution.

Endocrine disruptors such as bisphenol A (BPA) adversely affect the environment and human health. Laccases are used for the efficient biodegradation of various persistent organic pollutants in an environmentally safe manner. However, the direct application of free laccases is generally hindered by short enzyme lifetimes, non-reusability, and the high cost of a single use. In this study, laccases were immobilized on a novel magnetic three-dimensional poly(ethylene glycol) diacrylate (PEGDA)-chitosan (CS) inverse opal hydrogel (LAC@MPEGDA@CS@IOH). The immobilized laccase showed significant improvement in the BPA degradation performance and superior storage stability compared with the free laccase. 91.1% of 100 mg/L BPA was removed by the LAC@MPEGDA@CS@IOH in 3 hr, whereas only 50.6% of BPA was removed by the same amount of the free laccase. Compared with the laccase, the outstanding BPA degradation efficiency of the LAC@MPEGDA@CS@IOH was maintained over a wider range of pH values and temperatures. Moreover, its relative activity of was maintained at 70.4% after 10 cycles, and the system performed well in actual water matrices. This efficient method for preparing immobilized laccases is simple and green, and it can be used to further develop ecofriendly biocatalysts to remove organic pollutants from wastewater.

Combining slow-release fertilizer and plastic film mulching reduced the carbon footprint and enhanced maize yield on the Loess Plateau.

Agricultural practices significantly contribute to greenhouse gas (GHG) emissions, necessitating cleaner production technologies to reduce environmental pressure and achieve sustainable maize production. Plastic film mulching is commonly used in the Loess Plateau region. Incorporating slow-release fertilizers as a replacement for urea within this practice can reduce nitrogen losses and enhance crop productivity. Combining these techniques represents a novel agricultural approach in semi-arid areas. However, the impact of this integration on soil carbon storage (SOCS), carbon footprint (CF), and economic benefits has received limited research attention. Therefore, we conducted an eight-year study (2015-2022) in the semi-arid northwestern region to quantify the effects of four treatments [urea supplied without plastic film mulching (CK-U), slow-release fertilizer supplied without plastic film mulching (CK-S), urea supplied with plastic film mulching (PM-U), and slow-release fertilizer supplied with plastic film mulching (PM-S)] on soil fertility, economic and environmental benefits. The results revealed that nitrogen fertilizer was the primary contributor to total GHG emissions (≥71.97%). Compared to other treatments, PM-S increased average grain yield by 12.01%-37.89%, water use efficiency by 9.19%-23.33%, nitrogen accumulation by 27.07%-66.19%, and net return by 6.21%-29.57%. Furthermore, PM-S decreased CF by 12.87%-44.31% and CF per net return by 14.25%-41.16%. After eight years, PM-S increased SOCS (0-40 cm) by 2.46%, while PM-U decreased it by 7.09%. These findings highlight the positive effects of PM-S on surface soil fertility, economic gains, and environmental benefits in spring maize production on the Loess Plateau, underscoring its potential for widespread adoption and application.

Synthesis of ternary geopolymers using prediction for effective solidification of mercury in tailings.

This study used steel slag, fly ash, and metakaolin as raw materials (SFM materials) to create silica-alumina-based geopolymers that can solidify Hg2+ when activated with sodium-based water glass. The experiments began with a triangular lattice point mixing design experiment, and the results were fitted, analyzed, and predicted. The optimum SFM material mass ratio was found to be 70% steel slag, 25% fly ash, and 5% metakaolin. The optimum modulus of the activator was identified by comparing the unconfined compressive strength and solidifying impact on Hg2+of geosynthetics with different modulus. The SFM geopolymer was then applied in the form of potting to cure the granulated mercury tailings. The inclusion of 50% SFM material generated a geosynthetic that reduced mercury transport to the surface soil by roughly 90%. The mercury concentration of herbaceous plant samples was also reduced by 78%. It indicates that the SFM material can effectively attenuate the migration transformation of mercury. Finally, characterization methods such as XPS and FTIR were used to investigate the mechanism of Hg2+ solidification by geopolymers generated by SFM materials. The possible solidification mechanisms were proposed as alkaline environment-induced mercury precipitation, chemical bonding s, surface adsorption of Hg2+ and its precipitates by the geopolymer, and physical encapsulation.

Rapid detection of colored and colorless macro- and micro-plastics in complex environment via near-infrared spectroscopy and machine learning.

To better understand the migration behavior of plastic fragments in the environment, development of rapid non-destructive methods for in-situ identification and characterization of plastic fragments is necessary. However, most of the studies had focused only on colored plastic fragments, ignoring colorless plastic fragments and the effects of different environmental media (backgrounds), thus underestimating their abundance. To address this issue, the present study used near-infrared spectroscopy to compare the identification of colored and colorless plastic fragments based on partial least squares-discriminant analysis (PLS-DA), extreme gradient boost, support vector machine and random forest classifier. The effects of polymer color, type, thickness, and background on the plastic fragments classification were evaluated. PLS-DA presented the best and most stable outcome, with higher robustness and lower misclassification rate. All models frequently misinterpreted colorless plastic fragments and its background when the fragment thickness was less than 0.1mm. A two-stage modeling method, which first distinguishes the plastic types and then identifies colorless plastic fragments that had been misclassified as background, was proposed. The method presented an accuracy higher than 99% in different backgrounds. In summary, this study developed a novel method for rapid and synchronous identification of colored and colorless plastic fragments under complex environmental backgrounds.