Assessing the bleaching effect of an experimental stabilized chlorine dioxide agent used for internal bleaching purposes

Aim Assessing the intracoronal bleaching effectiveness of an experimental chlorine dioxide product, based on the walking bleach technique. Methods Extracted bovine incisors were artificially stained with bovine blood and filled with zinc phosphate cement at cementoenamel junction level. Teeth were divided into 3 groups (n=10): (SP) sodium perborate added with distilled water, (CD) chlorine dioxide and (C) control - dry cotton inserted into the pulp chamber. Bleaching agents were used at 0, 7 and 14 days. VITA Easyshadetm (∆Eab) was used to analyze tooth color at the 7th, 14th and 21st days, based on the CIE2000 system. Data were analyzed through ANOVA and Tukey's test. Results There were no statistically significant differences in Δb, ΔE, ΔE00 and ΔWID between CD and the control group. These parameters have shown significant differences between CD and SP, which differed from the control. However, they did not show significant differences either in the control group or in CD at the 7th, 14th and 21st days. Values recorded for SP at the 7th day differed from those recorded at the 14th and 21st days. Δa has shown differences within the same group at the 7th, 14th and 21st days. There was no difference between groups, when they were compared at the same day (7th and 14th). The control group differed from SP at the 21st day. CD did not differ from the other two groups. ΔL did not show differences between groups and times. Conclusion Stabilized chlorine dioxide (0.07%, at pH 3.5) should not be used as intracoronal bleaching agent along with the walking bleach technique.

Effects of glycerol and sodium pentaborate containing new formulation on sleeve gastrectomy model in rats

ABSTRACT Purpose: The development of cutting surface leakage and postoperative peritoneal adhesions (PPA) after sleeve gastrectomy (SG) are the most serious operative complications. We investigated the effectiveness of the newly developed glycerol and sodium pentaborate containing formulation on the prevention of these complications. Methods: Sixteen Sprague Dawley rats (mean weight 310 ± 50 g, mean age 3 months old) were divided into two groups, consisting of eight rats in each. SG and a double-layer suture technique were performed for each group. In study group, there was the mixture of 2 mL 3% glycerol plus 3% sodium pentaborate formulation, and in the control group 2 mL 0.9% NaCl was injected into the peritoneal cavity. Rats were sacrificed after 30 days, then macroscopic adhesion grade scoring and histopathological evaluations were assessed. Results: Macroscopic PPA scores in the control and study groups were 2.75 ± 0.16 and 1.50 ± 0.327, respectively (p = 0.004). Histopatologic fibrosis scores in the control and study groups were 0.87 ± 0.125 and 2.00 ± 0.26, respectively (p = 0.002). Conclusions: In SG operation model, glycerol plus sodium pentaborate compound decreased PPA formation and also increased stomach cut surface line fibrosis. This new formulation is hopeful for more safe SG operations.

Determination of the effective anticandidal concentration of denture cleanser tablets on some denture base resins

Abstract Objective Although the effectiveness of chemical cleansing against Candida albicans biofilm has been shown, the effective concentration of denture cleanser tablets has not been studied. The aim of this study was to assess the effect of three denture materials against Candida albicans biofilm and to determine effective concentrations of denture cleanser tablets. Material and methods The surface-roughness of Acron-hi™, QC-20™ and Deflex™ (n=45 per resin) resins was standardized by using a profilometer and their contact angle or surface free energy was calculated. C. albicans biofilm was formed on all three resins and were treated with Polident 3 min™, Corega™ and Fittydent™ cleanser solutions at various concentrations and both resin-biofilm and cleanser-biofilm interest were determined by using a MTT protocol according to the European Committee on Antimicrobial Susceptibility Testing's antifungal susceptibility testing (AFST-EUCAST). Scanning electron microscopy was used to compare the efficacy of different resin materials against C. albicans biofilm. Anticandidal activity and surface free energy statistical parameters were calculated by using 3-way and 1-way ANOVA, respectively (p<0.05). Results Polident 3 min™ and Corega™ tablets significantly inhibited (p<0.05) the proliferation of C. albicans against all denture resins at 27-37 mg/mL. Scanning electron microscopy results indicated that there was no significant difference among resin specimens regarding biofilm formation on dentures. We failed to find a significant relationship between surface free energy and the anticandidal effect of resin types. However, the polarity value of the resins was statistically associated with their anticandidal activity. Conclusions The polarity of the resins, the concentrations of tablets and the chemical content of the cleanser may directly affect C. albicans biofilm formations. Polident 3 min™ and Corega™ tablets should be suggested for patients who use any denture resin types, whereas the Fittydent™ tablet should only be proposed for those who use Deflex™, when two tablets are dropped into 150 mL water.

Determinación de la dureza total en agua con EDTA empleando una solución amortiguadora inodora de borato / Total hardness water determination by EDTA using a olorless buffer borate

La determinación de Dureza Total con EDTA en agua usando una solución amortiguadora de amonio pH 10 tiene la desventaja de generar vapores de gas amoníaco que suelen ser molestos o ser potencialmente dañinos para el sistema respiratorio del operario. El objetivo de este estudio fue utilizar una solución amortiguadora inodora de borato pH 10 en sustitución de una solución amortiguadora de amonio a pH 10 para la determinación de la dureza total en agua por la metodología de la norma COVENIN 2408-86 y determinar si existía diferencia estadísticamente significativa entre ambos procedimientos. Se determinó la Dureza Total usando la solución amortiguadora inodora de borato en 13 muestras de agua con diferentes grados de dureza (suave, dura y muy dura); los resultados obtenidos se compararon con los valores del procedimiento de referencia. La solución amortiguadora permitió una visualización rápida y definida del punto final durante la ejecución de la determinación volumétrica, los resultados mostraron que no existe diferencia estadísticamente significativa (p≤0,05) en los valores de dureza al emplear ambas soluciones amortiguadoras. Se concluyó que el empleo de la solución amortiguadora inodora de borato para la cuantificación de dureza total en agua es una alternativa a la solución amortiguadora de amonio.

Total Hardness determination EDTA in water using ammonium buffer solution pH 10 has the disadvantage of generating ammonia gas vapors are usually upset or be potentially harmful to the respiratory system operator. The aim of this study was to use a buffer solution pH 10 borate odorless replacing ammonium buffer solution at pH 10 for the determination of total water hardness in the methodology of COVENIN 2408-86 standard and determine whether there was difference statistically significant between the two procedures. Total Hardness was determined using borate buffer odorless in 13 water samples with different degrees of hardness (soft, hard and very hard); the results obtained were compared with the reference method values. The buffer allowed rapid and sharp display of the end point during the execution of the volumetric determination, the results showed that there was no statistically significant difference (p≤ 0,05) in hardness values by using two buffers. It was concluded that the use of borate buffer odorless for quantification of total hardness water is an alternative to the ammonium buffer.

Determinantes da autoavaliação de saúde no Brasil e a influência dos comportamentos saudáveis: resultados da Pesquisa Nacional de Saúde, 2013 / Determinants of self-rated health and the influence of healthy behaviors: results from the National Health Survey, 2013

RESUMO: Objetivo: Investigar os determinantes da autoavaliação de saúde (AAS) no Brasil e a influência dos comportamentos saudáveis. Métodos: Foram usados os dados da Pesquisa Nacional de Saúde (PNS) de 2013. A AAS foi categorizada em muito boa/boa, regular, ruim/muito ruim. Foram testadas diferenças na distribuição da AAS segundo faixa de idade e sexo e foram usados modelos de regressão logística para investigar os efeitos de grau de escolaridade, raça/cor e presença de pelo menos uma doença crônica não transmissível (DCNT) sobre a AAS ruim/muito ruim. Adicionalmente, testou-se a influência dos comportamentos saudáveis, controlando-se os efeitos dos fatores sociodemográficos e presença de pelo menos uma DCNT. Resultados: Foram analisados 60.202 indivíduos, 66,1% avaliaram o seu estado de saúde como muito bom/bom, e 5,9%, como ruim/muito ruim; 47,1% referiram o diagnóstico de pelo menos uma DCNT; e apenas 9,3% disseram ter "estilo de vida saudável" (não usa produtos de tabaco, consome frutas e hortaliças e pratica atividade física no lazer). Entre os fatores sociodemográficos, idade, sexo, grau de escolaridade e raça mostraram associações significativas com a AAS, bem como a presença de pelo menos uma DCNT. Os efeitos de todos os comportamentos saudáveis foram significativos, mesmo após o controle dos demais determinantes. Conclusão: Embora a adoção dos comportamentos saudáveis no Brasil ainda seja insuficiente, a associação dos hábitos saudáveis com a percepção da saúde encontrada neste estudo é um indício de que a população brasileira já começa a relacionar os comportamentos saudáveis ao seu bem-estar e à avaliação melhor da saúde.

ABSTRACT: Objective: To investigate the determinants of self-rated health in Brazil and the influence of healthy lifestyles. Methods: We used data from the National Health Survey (PNS), 2013. The self-rated health was categorized as very good/good, fair, and poor/very poor. Differences in the distribution of self-rated health according to the age group and sex were tested. Logistic regression models were used to test the effects of educational level, race/skin color, and the presence of at least one noncommunicable chronic disease on poor/very poor health perception. In addition, the influence of healthy behaviors was tested controlling for the effects of sociodemographic factors and the presence of at least one chronic disease. Results: We analyzed 60,202 individuals; about 66.1% rated their health as very good/good and 5.9% as poor/very poor; about 47.1% reported the diagnosis of at least one noncommunicable chronic disease; and only 9.3% reported a "healthy lifestyle" (do not use tobacco products, consume fruits and vegetables properly, and do physical activity during leisure time). Among the sociodemographic factors, age, sex, educational level, and race were significantly associated with self-rated health and the presence of at least one chronic disease. The effects of all healthy behaviors were statistically significant even after controlling for the other determinants. Conclusion: Although the adoption of healthy lifestyles in Brazil is still insufficient, the association of healthy practices with self-perception of health found in this study is an indication that the Brazilian population is beginning to relate healthy behaviors to their well-being and better health evaluation.

Biocompatibility and bioactivity of calcium silicate-based endodontic sealers in human dental pulp cells

Mineral Trioxide Aggregate (MTA) is a calcium silicate-based material. New sealers have been developed based on calcium silicate as MTA Fillapex and MTA Plus.Objective The aim of this study was to evaluate biocompatibility and bioactivity of these two calcium silicate-based sealers in culture of human dental pulp cells (hDPCs).Material and Methods The cells were isolated from third molars extracted from a 16-year-old patient. Pulp tissue was sectioned into fragments with approximately 1 mm3 and kept in supplemented medium to obtain hDPCs adherent cultures. Cell characterization assays were performed to prove the osteogenic potential. The evaluated materials were: MTA Plus (MTAP); MTA Fillapex (MTAF) and FillCanal (FC). Biocompatibility was evaluated with MTT and Neutral Red (NR) assays, after hDPCs exposure for 24 h to different dilutions of each sealer extract (1:2, 1:3 and 1:4). Unexposed cells were the positive control (CT). Bioactivity was assessed by alkaline phosphatase (ALP) enzymatic assay in cells exposed for one and three days to sealer extracts (1:4 dilution). All data were analyzed by ANOVA and Tukey post-test (p≤0.05%).Results MTT and NR results showed suitable cell viability rates for MTAP at all dilutions (90-135%). Cells exposed to MTAF and FC (1:2 and 1:4 dilutions) showed significant low viability rate when compared to CT in MTT. The NR results demonstrated cell viability for all materials tested. In MTAP group, the cells ALP activity was similar to CT in one and three days of exposure to the material. MTAF and FC groups demonstrated a decrease in ALP activity when compared to CT at both periods of cell exposure.Conclusions The hDPCs were suitable for the evaluation of new endodontic materialsin vitro. MTAP may be considered a promising material for endodontic treatments.

Comparison of different methods for total RNA extraction from sclerotia of Rhizoctonia solani

Background Rhizoctonia solani (teleomorph: Thanatephorus cucumeris) is one of the most important pathogens of rice (Oryza sativa L.) that causes severe yield losses in all rice-growing regions. Sclerotia, formed from the aggregation of hyphae, are important structures in the life cycles of R. solani and contain a large quantity of polysaccharides, lipids, proteins and pigments. In order to extract high-quality total RNA from the sclerotia of R. solani, five methods, including E.Z.N.A.™ Fungal RNA Kit, sodium dodecyl sulfate (SDS)-sodium borate, SDS-polyvinylpyrrolidone (PVP), guanidinium thiocyanate (GTC) and modified Trizol, were compared in this study. Results The electrophoresis results showed that it failed to extract total RNA from the sclerotia using modified Trizol method, whereas it could extract total RNA from the sclerotia using other four methods. Further experiments confirmed that the total RNA extracted using SDS-sodium borate, SDS-PVP and E.Z.N.A.™ Fungal RNA Kit methods could be used for RT-PCR of the specific amplification of GAPDH gene fragments, and that extracted using GTC method did not fulfill the requirement for above-mentioned RT-PCR experiment. Conclusion It is concluded that SDS-sodium borate and SDS-PVP methods were the better ones for the extraction of high-quality total RNA that could be used for future gene cloning and expression studies, whereas E.Z.N.A.™ Fungal RNA Kit was not taken into consideration when deal with a large quantity of samples because it is expensive and relatively low yield.

Effect of denture cleansers on metal ion release and surface roughness of denture base materials

Chemical disinfectants are usually associated with mechanical methods to remove stains and reduce biofilm formation. This study evaluated the effect of disinfectants on release of metal ions and surface roughness of commercially pure titanium, metal alloys, and heat-polymerized acrylic resin, simulating 180 immersion trials. Disk-shaped specimens were fabricated with commercially pure titanium (Tritan), nickel-chromium-molybdenum-titanium (Vi-Star), nickel-chromium (Fit Cast-SB Plus), and nickel-chromium-beryllium (Fit Cast-V) alloys. Each cast disk was invested in the flasks, incorporating the metal disk to the heat-polymerized acrylic resin. The specimens (n=5) were immersed in these solutions: sodium hypochlorite 0.05%, Periogard, Cepacol, Corega Tabs, Medical Interporous, and Polident. Deionized water was used as a control. The quantitative analysis of metal ion release was performed using inductively coupled plasma mass spectrometry (ELAN DRC II). A surface analyzer (Surftest SJ-201P) was used to measure the surface roughness (µm). Data were recorded before and after the immersions and evaluated by two-way ANOVA and Tukey's test (α=0.05). The nickel release proved most significant with the Vi-Star and Fit Cast-V alloys after immersion in Medical Interporous. There was a significant difference in surface roughness of the resin (p=0.011) after immersion. Cepacol caused significantly higher resin roughness. The immersion products had no influence on metal roughness (p=0.388). It could be concluded that the tested alloys can be considered safe for removable denture fabrication, but disinfectant solutions as Cepacol and Medical Interporous tablet for daily denture immersion should be used with caution because it caused greater resin surface roughness and greater ion release, respectively.

Desinfetantes químicos são normalmente associados a métodos mecânicos para remover manchas e reduzir a formação do biofilme. Este estudo avaliou o efeito de desinfetantes na liberação de íons metálicos e na rugosidade superficial do titânio comercialmente puro, ligas metálicas e resina acrílica termopolimerizável, simulando 180 ensaios de imersões. Espécimes em formato de discos foram confeccionados com titânio comercialmente puro (Tritan), liga de níquel-cromo-molibdênio-titânio (Vi-Star), liga de níquel-cromo (Fit Cast-SB Plus) e liga de níquel-cromo-berílio (Fit Cast-V). Os espécimes (n=5) foram imersos nestas soluções: hipoclorito de sódio a 0,05%, Periogard, Cepacol, Corega Tabs, Medical Interporous e Polident. Como controle, foi utilizada a água deionizada. A análise quantitativa de liberação de íons metálicos foi realizada por meio de espectrometria de massa com plasma indutivamente acoplado (ELAN DRC II). O rugosímetro (Surftest SJ-201P) foi utilizado para medir a rugosidade superficial (µm). Os dados foram registrados antes e depois das imersões e avaliados por ANOVA com dois fatores e teste de Tukey (α=0,05). A liberação de níquel provou ser mais expressiva nas ligas Vi-Star e Fit Cast-V após a imersão em Medical Interporous. Houve diferença significante na rugosidade superficial da resina (p=0,011) após a imersão. O Cepacol causou maior rugosidade superficial de forma significativa. Os produtos de imersão não influenciaram nos resultados da rugosidade do metal (p=0,388). Pode-se concluir que as ligas metálicas testadas podem ser consideradas seguras para a fabricação de próteses removíveis, mas as soluções desinfetantes como o Cepacol e a pastilha Medical Interporous para a imersão diária da prótese devem ser utilizados com cautela, pois causaram maior rugosidade superficial da resina e maior liberação de íons, respectivamente.

Use of Aspergillus niger in the bioleaching of colemanite for the production of boric acid

Colemanite is one of the most important underground riches of Turkey, having approximately 60 percent of the world boron deposits, and it has a large portion in the deposits. In this study, chemical leaching and biological leaching methods were used for production of boric acid from colemanite (2CaO · 3B3O3 · 5H2O) (Emet-Kütahya, Turkey). Oxalic acid concentration, temperature, stirring time and solid-to-liquid ratio were taken as parameters in the chemical leaching process. It was found that the dissolution rate increases with increasing oxalic acid concentration and temperature but it decreases at higher solid-to-liquid ratios in the chemical leaching process. Using optimum conditions (d100 = 0.075 mm; 5 percent solids by weight; 0.55 M oxalic acid; 80 +/- 2 ºC leaching temperature; 150 rpm stirring speed; 90 min leaching time) for colemanite sample (28.05 percent B2O3) on chemical leaching with oxalic acid experiments, the calculated boric acid extraction efficiency from colemanite ore was 97.89 percent. Optimum conditions on bioleaching of Emet-Kütahya, Turkey colemanite ores using the fungus Aspergillus niger were found to be as follows: reaction temperature 25 +/- 2ºC; solid-to-liquid ratio 5 percent solids by weight; d100 = 0.075 mm; stirring speed 150 rpm; initial the fungus populations in the inocula about 3 x 10(7) cells/ml and reaction time 21 days. The calculated boric acid extraction efficiency from colemanite ore was 90.18 percent under the optimum conditions. Bioleachate contained 12.95 g/l B2O3, 6.60 g/l Ca and 0.087 g/l Mg. Compared with chemical leaching at 5 percent pulp density, the fungus was less efficient in the extraction of B2O3 from colemanite but the difference in the extraction yields between the two processes was less than 10 percent. Although bioleaching generally requires a longer period of operation compared to chemical leaching, these results suggest that bioleaching by A...

Effect of different cleansers on the surface of removable partial denture

Removable partial dentures (RPD) demand specific hygienic cleaning and the combination of brushing with immersion in chemical solutions has been the most recommended method for control of biofilm. However, the effect of the cleansers on metallic components has not been widely investigated. This study evaluated the effect of different cleansers on the surface of RPD. Five disc specimens (12 mm x 3 mm metallic disc centered in a 38 x 18 x 4 mm mould filled with resin) were obtained for each experimental situation: 6 solutions [Periogard (PE), Cepacol (CE), Corega Tabs (CT), Medical Interporous (MI), Polident (PO), 0.05 percent sodium hypochlorite (NaOCl), and distilled water (DW) control] and 2 Co-Cr alloys [DeguDent (DD) and VeraPDI (VPDI)] were used for each experimental situation. A 180-day immersion was simulated and the measurements of roughness (Ra, µm) of metal and resin were analyzed using 2-way ANOVA and Tukey’s test. The surface changes and tarnishes were examined with a scanning electronic microscopy (SEM). In addition, energy dispersive x-ray spectrometry (EDS) analysis was carried out at representative areas. Visually, NaOCl and MI specimens presented surface tarnishes. The roughness of materials was not affected by the solutions (p>0.05). SEM images showed that NaOCl and MI provided surface changes. EDS analysis revealed the presence of oxygen for specimens in contact with both MI and NaOCl solutions, which might suggest that the two solutions promoted the oxidation of the surfaces, thus leading to spot corrosion. Within the limitations of this study, it may be concluded that the NaOCl and MI may not be suitable for cleaning of RPD.

As próteses parciais removíveis (PPR) exigem higienização específica e a associação da escovação com imersão em soluções químicas tem sido o método mais recomendado para controle do biofilme. Entretanto, os efeitos destas soluções não são amplamente reportados em componentes metálicos. Este estudo avaliou o efeito de diferentes agentes de higienização na superfície dos componentes de uma PPR. Foram confeccionados 5 espécimes (disco metálico de 12 x 3 mm centralizado em uma tira de resina com 38 x 18 x 4 mm) para cada situação experimental: 6 soluções [Periogard (PE), Cepacol (CE), Corega Tabs (CT), Medical Interporous (MI), Polident (PO), hipoclorito de sódio 0,05 por cento (HS) e água destilada (AD) como controle)] e 2 ligas de cobalto-cromo [DeguDent (DD) e Vera PDI (VPDI)] foram utilizadas para cada situação experimental. Foram simuladas imersões de 180 dias. As aferições de rugosidade (Ra, μm) tanto em porção metálica quanto em resina acrílica termopolimerizável foram submetidos ao ANOVA e ao teste de Tukey. As alterações superficiais e manchas foram examinadas por meio de microscopia eletrônica de varredura (MEV). Áreas de interesse foram submetidas à espectrometria por energia dispersiva por raios X (EDS). Visualmente, puderam ser verificadas manchas nas superfícies metálicas quando utilizados HS e MI. A rugosidade dos materiais não foi afetada pelas soluções (p>0,05). As fotomicrografias evidenciaram que HS e MI ocasionaram alterações superficiais. As análises de EDS revelaram a presença de oxigênio nos grupos HS e MI, o que pode sugerir que estas duas soluções causaram oxidação das superfícies, provocando pontos de corrosão. Dentre as limitações do presente estudo, pode-se concluir que estas soluções não são apropriadas para a higienização das PPR.

In vivo efficacy of alkaline peroxide tablets and mouthwashes on Candida albicans in patients with denture stomatitis

OBJECTIVE: Effective cleaning of dentures is important for the maintenance of good oral hygiene for denture stomatitis patients. The in vivo efficacy of three different brands of alkaline peroxide tablets (Polident, Efferdent, and Fittydent) and two mouthwashes (CloSYS II and Corsodyl) to eliminate Candida albicans on dentures was evaluated in this in vivo study. MATERIAL AND METHODS: Ninety denture wearers with clinical evidence of denture stomatitis were randomly divided into 5 test groups and 1 control group. Each group was further divided into three subgroups in which the dentures were subjected to 15-, 30-, and 60-min disinfection procedures. The dentures of each test group were treated with one of the cleaners, while those of the control group were treated with distilled water. Swab samples from the palatal surfaces (2 cm x 2 cm template delimited area) of the upper dentures were obtained before and after 15, 30, and 60 min periods of cleaner use and examined mycologically. RESULTS: The reduction in the number of colony-forming units (CFU) of C. albicans before, and after 15, 30, and 60 min of use of CloSYS II and Corsodyl was significantly greater than that of the control group (p<0.05). Moreover, there was no statistically significant difference (p>0.05) among Polident, Efferdent and the control group in any of the treatment periods. Dentures treated with Fittydent appeared to have a significantly greater reduction in the number of Candida spp. only after 60 min of treatment. CONCLUSIONS: The results of this study showed that the use of mouthwashes significantly reduced the number of microorganisms on dentures.

Evaluation of alternative methods for the disinfection of toothbrushes

The aim of this study was to evaluate alternative methods for the disinfection of toothbrushes considering that most of the previously proposed methods are expensive and cannot be easily implemented. Two-hundred toothbrushes with standardized dimensions and bristles were included in the study. The toothbrushes were divided into 20 experimental groups (n = 10), according to microorganism considered and chemical agent used. The toothbrushes were contaminated in vitro by standardized suspensions of Streptococcus mutans, Streptococcus pyogenes, Staphylococcus aureus or Candida albicans. The following disinfectants were tested: 0.12 percent chlorhexidine digluconate, 50 percent white vinegar, a triclosan-containing dentifrice solution, and a perborate-based tablet solution. The disinfection method was immersion in the disinfectant for 10 min. After the disinfection procedure, the number of remaining microbial cells was evaluated. The values of cfu/toothbrush of each group of microorganism after disinfection were compared by Kruskal-Wallis ANOVA and Dunn's test for multiple comparisons (5 percent). The chlorhexidine digluconate solution was the most effective disinfectant. The triclosan-based dentifrice solution promoted a significant reduction of all microorganisms' counts in relation to the control group. As to the disinfection with 50 percent vinegar, a significant reduction was observed for all the microorganisms, except for C. albicans. The sodium perborate solution was the less effective against the tested microorganisms. Solutions based on triclosan-containing dentifrice may be considered effective, nontoxic, cost-effective, and an easily applicable alternative for the disinfection of toothbrushes. The vinegar solution reduced the presence of S. aureus, S. mutans and S. pyogenes on toothbrushes.

Cytotoxicity evaluation of two root canal sealers and a commercial calcium hydroxide paste on THP1 cell line by Trypan Blue assay

OBJECTIVE: The aim of this investigation was to evaluate the cytotoxicity of two brands of root canal sealers, epoxy-resin based and zinc oxide-eugenol based, and one commercial calcium hydroxide paste on a monocyte cell line THP-1. MATERIAL AND METHODS: Undiluted (crude extract) and diluted extracts to 10 percent, 1 percent, 0.1 percent, 0.01 percent, 0.001 percent and 0.0001 percent of the sealers were tested for cytotoxicity to THP-1 cells using the trypan blue assay. Extracts were obtained according to ISO standard. Data were analyzed statistically by the Kruskal-Wallis and Mann-Whitney tests at 5 percent significance level. RESULTS: Crude extract of AH Plus and Fill Canal killed approximately 90 percent of THP-1 cells versus 36 percent of THP-1 cells killed by L&C crude extract (p<0.05). Ten-fold dilutions of L&C, Fill Canal and AH Plus killed 24, 35 and 61 percent of THP-1 cells (p<0.05), respectively. Dilutions lesser than 1 percent caused minimal cell death as compared to the control groups (p>0.05), except for L&C 1 percent extract. CONCLUSIONS: The results revealed that the L&C paste crude extract was less cytotoxic to THP-1 cells than AH Plus or Fill Canal crude extracts.

Effectiveness of carbamide peroxide and sodium perborate in non-vital discolored teeth

Objective: To evaluate the efficacy of 16% carbamide peroxide gel (CP16%), tetrahydrate sodium perborate (SP) and mixture (CP16% + SP), in walking bleaching of non-vital discolored teeth. Materials and methods: Sixty single-rooted human premolars with intact crowns were used and initial color was assessed using Vita shade guide and standardized photos. The teeth were stained using rabbit fresh blood for 18 days and photos of discolored teeth and color evaluation were performed. The teeth were divided into 4 groups (n= 15), according to bleaching agent used: G1) CP16% gel; G2) CP16% gel + SP; G3) SP + distilled water; G4: control.The bleaching agents were replaced twice at 7-day intervals for 21 days. All teeth were evaluated by two endodontists at days 0, 7, 14 and 21 and the color changes were assessed using Vita shade guide and standardized photos. The results were analyzed byKruskal-Wallis and Dunn’s tests (p=0.05). Results: The experimental groups presented statistically similar bleaching results (p>0.05) at the end of 7, 14 and 21 days. These groups presented significantly higher bleaching efficacy than control group (G4) (p<0.05). The mixture CP16% + SP promoted return of original color in 100% of teeth at the end of 21 days. Conclusion: It was concluded that three bleaching agents were effective in bleaching of stained teeth with blood products, especially at the end of 21 days.

Influence of apical patency and filling material on healing process of dogs' teeth with vital pulp after root canal therapy

Foi propósito deste trabalho observar o processo de reparo de dentes de cães após obturação dos canais com dois cimentos diferentes, fazendo ou não a patência apical. Após uma sobreinstrumentação, os canais receberam um curativo de uma solução de corticosteróide-antibiótico por 7 dias, com o objetivo de obter invaginação de tecido conjuntivo para dentro dos canais. Após esse período, esse tecido foi totalmente removido em metade dos casos (grupos com patência apical) e preservados no restante dos casos (grupos sem patência apical). Os canais foram obturados pela técnica da condensação lateral empregando um cimento a base de hidróxido de cálcio (Sealer Plus) ou um cimento de Grossman (Fill Canal). Os animais foram sacrificados por overdose anestésica 60 dias após o tratamento endodôntico e as peças anatômicas foram obtidas e preparadas para análise histológica. Os dados obtidos foram analisados com base em diversos parâmetros histomorfológicos. Os resultados foram melhores nos grupos sem patência apical (p=0,01) do que nos grupos com patência. Dentre os cimentos estudados, os melhores resultados foram observados com o cimento Sealer Plus (p=0,01). Em conclusão, tanto a patência apical (presença ou ausência) quanto o tipo de material obturador de canal influíram no processo de reparo apical de dentes de cães com polpas vitais após tratamento endodôntico. O emprego de um cimento a base de hidróxido de cálcio em dentes sem patência apical promoveu os melhores resultados, dentre as condições experimentais propostas.

Influence of post-bleaching time intervals on dentin bond strength

Tem-se sugerido que a qualidade da adesão resina composta-dentina pode ser prejudicada quando restaurações são confeccionadas imediatamente após o tratamento clareador. Este estudo avaliou o efeito da postergação do procedimento adesivo após o clareamento interno realizado com diferentes agentes na resistência ao cisalhamento da interface compósito/dentina. De acordo com um delineamento aleatório em blocos completos, cilindros de resina composta (Z100/Single Bond - 3M) foram confeccionados em duzentos e cinqüenta e seis fragmentos dentinários bovinos planificados, os quais foram previamente submetidos a 4 tratamentos: PSH - perborato de sódio + peróxido de hidrogênio a 30%; PSA - perborato de sódio + água destilada; PC - peróxido de carbamida a 37% e CON - água destilada (controle), sendo estes seguidos pelo armazenamento em saliva artificial por 0, 7, 14 e 21 dias após o clareamento (n = 16). Os agentes clareadores inseridos na câmara pulpar foram substituídos a cada 7 dias, durante 4 semanas. O teste de resistência ao cisalhamento foi realizado em máquina de ensaios universal. ANOVA mostrou que a interação entre os tempos e os agentes clareadores não foi significativa (p > 0,05). Para o fator tratamento clareador, o teste t de Student revelou que [PC = CON] > [PSA = PSH]. Independentemente do tempo decorrido após o clareamento, os valores de resistência adesiva entre resina e dentina foram reduzidos quando se utilizou perborato de sódio associado ao peróxido de hidrogênio ou à água.

Standardization of a fluorimetric assay for the determination of tissue angiotensin-converting enzyme activity in rats

The tripeptide Hip-His-Leu was used to standardize a fluorimetric method to measure tissue angiotensin-converting enzyme (ACE) activity in rats. The fluorescence of the o-phthaldialdehyde-His-Leu adduct was compared in the presence and absence of the homogenate (25 µl) to determine whether the homogenate from different tissues interfered with the fluorimetric determination of the His-Leu product. Only homogenates from lung and renal medulla and cortex showed significantly altered fluorescence intensity. To overcome this problem, the homogenate from these tissues were diluted 10 times with assay buffer. The specificity of the assay was demonstrated by the inhibition of ACE activity with 3 µM enalaprilat (MK-422). There was a linear relationship between product formation and incubation time for up to 90 min for homogenates of renal cortex and medulla and liver, for up to 60 min for ventricles and adrenals and for up to 30 min for the aorta, lung and atrium homogenates. In addition, there was a linear relationship between product formation and the amount of protein in the homogenates within the following range: lung, 30-600 µg; renal cortex and medulla, 40-400 µg; atrium and ventricles, 20-200 µg; adrenal, 20-100 µg; aorta, 5-100 µg; liver, 5-25 µg. No peptidase activity against the His-Leu product (31 nmol), assayed in borate buffer (BB), was detected in the different homogenates except the liver homogenate, which was inhibited by 0.1 mM r-chloromercuribenzoic acid. ACE activity in BB was higher than in phosphate buffer (PB) due, at least in part, to a greater hydrolysis of the His-Leu product in PB. ACE activity of lung increased 20 percent when BB plus Triton was used. Enzyme activity was stable when the homogenates were stored at -20o or -70oC for at least 30 days. These results indicate a condition whereby ACE activity can be easily and efficiently assayed in rat tissue samples homogenized in BB using a fluorimetric method with Hip-His-Leu as a substrate.

Actividad inhibitoria "in vitro" de algunos antisépticos frente a cultivos de Prototheca wickerhamii / \"In vitro\" inhibitory activity of some antiseptic drugs against Prototheca wickerhamii strains

Se estudió la acción inhibidora "in vitro" de los siguientes antisépticos: etil mercurio tiosalicilato de sodio, azida sódica, borato de sodio, yoduro de potasio, fenol y cloro, frente a cultivos de 5 cepas de Prototheca wickerhamii. La acción "in vitro" de estas drogas fue medida mediante el halo de inhibición que produjeron en los cultivos de Prototheca en medio de agar-miel de Sabouraud incubados a 28ºC. Los resultados obtenidos permitieron establecer que todas las cepas eran uniformemente susceptibles al etilmercurio tiosalicilato de sodio y a la azida sódica, la mayor parte fue inhibida por el yoduro de potasio, en tanto que, el borato de sodio, el fenol y el cloro resultaron inactivos en las diluciones utilizadas