Dentifrícios branqueadores contendo Blue covarine: revisão de literatura / Bleaching dentifrices containing "Blue covarine" literature review

Introdução: O efeito branqueador dos dentifrícios contendo Blue covarine é fundamentado no seu mecanismo de ação, caracterizado pela sua deposição na superfície dentária, alterando a percepção da cor. Objetivo: Revisar a literatura e buscar evidência científica sobre o efeito branqueador do Blue Covarine em tecidos mineralizados e materiais restauradores estéticos. Materiais e métodos: Para a revisão da literatura foram feitas buscas nas bases de dados PubMed, LILACS, BBO, SciELO e MEDLINE para identificar estudos clínicos e laboratoriais que avaliassem a ação branqueadora do agente óptico Blue covarine. Como estratégia de busca foram utilizados os descritores "Blue covarine", "Blue covarine e pasta de dentes", "Blue covarine and toothpaste", "Blue covarine e dentifrícios", "Blue covarine and dentifrices", "Blue covarine e dentifrícios branqueadores", "Blue covarine and whitening dentifrices", "Blue covarine e dentifrícios clareadores", "Blue covarine and bleaching dentifrices", "Blue covarine e pasta de dentes branqueadoras", "Blue covarine and whitening toothpaste", "Blue covarine e pasta de dentes clareadoras", "Blue covarine and bleaching toothpaste". Resultados: Dois pesquisadores selecionaram e analisaram criticamente 31 artigos, sendo 2 revisões da literatura, 4 estudos clínicos e 25 estudos laboratoriais. Divergências quanto ao desenho de estudo, métodos, amostra, critérios clínicos e parâmetros laboratoriais foram observados, além de conflitos de interesse. Conclusão: O Blue Covarine presente nos dentifrícios branqueadores parece ser efetivo na promoção do branqueamento dentário apenas quando associado aos agentes abrasivos presentes nas formulações, evidenciando que ensaios clínicos e laboratoriais, com metodologias semelhantes, são necessários para se obter evidência científica conclusiva sobre o efeito deste agente branqueador.(AU)

Introduction: The whitening effect of dentifrices containing Blue Covarine is based on its mechanism of action, characterized by its deposition on the tooth surface, altering the perception of color. Objective: To review the literature and seek scientific evidence on the whitening effect of Blue Covarine on mineralized tissues and aesthetic restorative materials. Materials and methods: For the literature review, searches were carried out in the PubMed, LILACS, BBO, SciELO and MEDLINE databases, in order to identify clinical and laboratory studies that evaluated the whitening action of the optical agent Blue Covarine. As a search strategy, the descriptors "Blue Covarine", "Blue Covarine and toothpaste", "Blue Covarine and dentifrices", "Blue Covarine and whitening dentifrices", "Blue Covarine and bleaching dentifrices", "Blue Covarine and whitening toothpaste", "Blue Covarine and bleaching toothpaste". Results: Two researchers selected and critically analyzed 31 articles, including 2 literature reviews, 4 clinical studies and 25 laboratory studies. Differences in study design, methods, sample, clinical criteria and laboratory parameters were observed, in addition to conflicts of interest. Conclusion: Blue Covarine present in whitening dentifrices seems to be effective in promoting dental whitening only when associated with abrasive agents present in the formulations, showing that clinical and laboratory tests, with similar methodologies, are necessary to obtain conclusive scientific evidence on the effect of this bleaching agent.(AU)

Whitening toothpaste containing activated charcoal, blue covarine, hydrogen peroxide or microbeads: which one is the most effective?

Abstract The efficacy of whitening toothpastes is questionable and controversial. Clinicians, patients and researchers have expressed concern with whitening toothpastes due to the risk of wearing the dental structure and the potential for disappointment if the advertised cosmetic results are not achieved. Objective: This study compared the whitening performance of toothpastes with different whitening technologies after initial and continued use. Material and Methods: Ninety bovine incisors were stained using a concentrated solution of black tea. They were randomly distributed into 6 groups, according to the toothpaste whitening technology: activated charcoal (B&W), blue covarine (WAD), hydrogen peroxide (LWA), microbeads (Oral B 3D White Perfection - 3DW) and optimized abrasives (XW4D). They were compared to a traditional toothpaste without a whitening agent (TA - control). Specimens underwent a brushing machine with controlled pressure, time and temperature. A calibrated examiner measured the color using a VITA-Classical scale before the first brushing cycle (T0), after the first brushing cycle (TI), and after a brushing cycle that simulates continuous use (TCU). Whitening performance was evaluated by the difference of shades (ΔSGU) between T0-TI and T0-TCU timepoints, using the Kruskal-Wallis and Dunn's non-parametric test. The Wilcoxon test was used to evaluate the cumulative effect (α=0.05). Results: Statistically significant differences were observed between toothpastes in both TI and TCU (p<0.05). The time of use also had a significant effect (p<0.05). Conclusion: Only WAD and 3DW showed whitening performance after the first use (TI). The greatest whitening performance after continuous use was obtained by WAD, followed by LWA and 3DW. The use of conventional toothpaste (TA) promotes no tooth whitening. Clinical relevance: Microbead abrasives (3DW) and blue covarine (WAD) were the active technology tested that presented the best global tooth whitening performance.

Does a toothpaste containing blue covarine have any effect on bleached teeth? An in vitro, randomized and blinded study

Abstract The objective of this study was to analyze the effect of bleaching toothpastes, both conventional and those containing the new whitening agent Blue Covarine, on teeth previously bleached by conventional techniques (in-office and at-home). Squared bovine enamel/dentin blocks (6.0 x 6.0 x 2.0 mm) were randomly distributed in 6 groups (n = 15), according to the technique used to bleach them (in-office: HP35%; at-home: PC10%) and the type of bleaching toothpaste (none: control; Blue Covarine containing: BC; and without Blue Covarine: NBC). Experimental groups denominated HP35%, HP35%BC and HP35%NBC received in-office tooth bleaching before toothbrushing, and groups PC10%, PC10%BC and PC10%NBC were subjected to at-home tooth bleaching prior to toothbrushing. After bleaching treatment, groups HP35%BC, PC10%BC, HP35%NBC and PC10%NBC underwent daily tooth brushing in a brushing machine for 3 minutes (150 strokes/min, with a load of 375 g). Tooth color alteration was measured by reflectance spectroscopy (Vita EasyShade, Vident, Brea, CA, USA) at: T0 (baseline) - after in-office or at-home bleaching treatment; T1 - immediately after tooth brushing; T2 - 7 days and T3 - 14 days after tooth brushing. Data was analyzed by repeated measures mixed ANOVA and the Bonferroni post hoc test, with a significance level of 5%. Statistically significant differences were found between different experimental groups, evaluation times and for the interaction between them (p < 0.001). Tooth brushing using either bleaching toothpaste (conventional or with Blue Covarine) showed no color alteration on teeth previously bleached by in-office and at-home tooth bleaching. The use of bleaching toothpastes on previously bleached teeth did not produce a color alteration.

Can a bleaching toothpaste containing Blue Covarine demonstrate the same bleaching as conventional techniques? An in vitro, randomized and blinded study

ABSTRACT Objective The purpose of this in vitro study was to compare the efficacy of a bleaching toothpaste containing Blue Covarine vs. conventional tooth bleaching techniques using peroxides (both in-office and at-home). Material and Methods Samples were randomly distributed into five experimental groups (n=15): C - Control; BC – Bleaching toothpaste containing Blue Covarine; WBC – Bleaching toothpaste without Blue Covarine; HP35 - In-office bleaching using 35% hydrogen peroxide; and CP10 – At-home bleaching with 10% carbamide peroxide. The dental bleaching efficacy was determined by the color difference (ΔE), luminosity (ΔL), green-red axis (Δa), and blue-yellow axis (Δb). The CIELab coordinates were recorded with reflectance spectroscopy at different times: T0 - baseline, T1 – immediately after bleaching, T2 - 7 days, T3 - 14 days, and T4 - 21 days after the end of treatments. Data were analyzed by a repeated measures mixed ANOVA and post hoc Bonferroni test, with a significance level of 5%. Results No significant differences were found between the treatment groups C, BC, and WBC. The groups HP35 and CP10 showed significantly higher whitening efficacy than groups C, BC, and WBC. Conclusions There were no significant differences in the whitening efficacy between a Blue Covarine containing toothpaste, a standard whitening toothpaste, and a control. Neither of the whitening toothpastes tested were as effective as in-office or at-home bleaching treatments.

Possible in vivo mechanisms involved in photodynamic therapy using tetrapyrrolic macrocycles

Photodynamic therapy (PDT) mediated by oxidative stress causes direct tumor cell damage as well as microvascular injury. To improve this treatment new photosensitizers are being synthesized and tested. We evaluated the effects of PDT with 5,10,15,20-tetrakis(4-methoxyphenyl)-porphyrin (TMPP) and its zinc complex (ZnTMPP) on tumor levels of malondialdehyde (MDA), reduced glutathione (GSH) and cytokines, and on the activity of caspase-3 and metalloproteases (MMP-2 and -9) and attempted to correlate them with the histological alterations of tumors in 3-month-old male Wistar rats, 180 ± 20 g, bearing Walker 256 carcinosarcoma. Rats were randomly divided into five groups: group 1, ZnTMPP+irradiation (IR) 10 mg/kg body weight; group 2, TMPP+IR 10 mg/kg body weight; group 3, 5-aminolevulinic acid (5-ALA+IR) 250 mg/kg body weight; group 4, control, no treatment; group 5, only IR. The tumors were irradiated for 15 min with red light (100 J/cm², 10 kHz, 685 nm) 24 h after drug administration. Tumor tissue levels of MDA (1.1 ± 0.7 in ZnTMPP vs 0.1 ± 0.04 nmol/mg protein in control) and TNF-α (43.5 ± 31.2 in ZnTMPP vs 17.3 ± 1.2 pg/mg protein in control) were significantly higher in treated tumors than in controls. Higher caspase-3 activity (1.9 ± 0.9 in TMPP vs 1.1 ± 0.6 OD/mg protein in control) as well as the activation of MMP-2 (P < 0.05) were also observed in tumors. These parameters were correlated (Spearman correlation, P < 0.05) with the histological alterations. These results suggest that PDT activates the innate immune system and that the effects of PDT with TMPP and ZnTMPP are mediated by reactive oxygen species, which induce cell membrane damage and apoptosis.

Intercalation compounds involving inorganic

Two-dimensional inorganic networks can shown intracrystalline reactivity, i.e., simple ions, large species as Keggin ions, organic species, coordination compounds or organometallics can be incorporated in the interlayer region. The host-guest interaction usually causes changes in their chemical, catalytic, electronic and optical properties. The isolation of materials with interesting properties and making use of soft chemistry routes have given rise the possibility of industrial and technological applications of these compounds. We have been using several synthetic approaches to intercalate porphyrins and phthalocyanines into inorganic materials: smectite clays, layered double hydroxides and layered niobates. The isolated materials have been characterized by elemental and thermal analysis, X-ray diffraction, surface area measurements, scanning electronic microscopy, electronic and resonance Raman spectroscopies and EPR. The degree of layer stacking and the charge density of the matrices as well their acid-base nature were considered in our studies on the interaction between the macrocycles and inorganic hosts.

Porphyrinosilica and metalloporphyrinosilica: hybrid organic-inorganic materials prepared by prepared by sol-gel processing

New materials porphyrinosilica and metalloporphyrinosilica template have been obtained by a sol-gel processing where functionalyzed porphyrins and metalloporphyrins "building blocks" were assembled into a three-dimensional silicate network. The optimized conditions for preparation of these materials are reviseed. The monomer precursors porphyrinopropylsilyl and metalloporphyrinopropylsilyl preparation reactions and subsequent one pot sol-gel processing with tetraethoxysilane are discussed. In the case of metalloporphyrins the nitrogen base coordinates to the central metal and acts as a template in the molecular imprinting technique. UV-visible absorption spectroscopy, thermogravimetric analysis, electron paramagnetic resonance, nuclear magnetic spectra, infrared spectra, luminescence spectra, surface area and electron spectroscopy imaging of the materials are used to characterize the prepared materials. The catalytic activities of these metalloporphyrinosilica-template are compared.

Instrumentaçäo de estado sólido para excitaçäo de indicador fosforecente de O2 / Solid state instrumentation for excitation of O2 phosphorescence indicator

Descreve-se a construção e desempenho de um instrumento para excitar o indicador fosforescente de O2, Paládio (Pd) coproporfirina imobilizado em um polímero. A excitação é efetuada via LEDs. Os resultados mostram que é possível a excitação do indicador, entretanto com baixa relação sinal/ruído. Pela utilização das medidas de tempos de vida de fosforescência, concentrações de O2 até 21 por cento podem ser determinadas.

The construction and performance of an instrument to excite the dye Pd coproporphyrin and to measure its phosphorescence lifetimes are described. The instrument employs LEDs as optical source. The results have shown that it is possible the excitation of the dye, although the intensity of the registered signals was very low. By measuring phosphorescence lifetimes concentrations up to 21 % of gaseous oxygen can be determined when the dye is immobilised in a polymer.