Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 355
Filtrar
1.
Braz. J. Pharm. Sci. (Online) ; 59: e20918, 2023. tab, graf
Artigo em Inglês | LILACS | ID: biblio-1429951

RESUMO

Abstract Solubility of pharmaceutical drugs in organic solvents is one of the important parameters to understand the equilibrium concentration of solute-solvent, which helps optimize and design crystallization conditions to obtain the desired product crystals. In the present study, Chlorzoxazone (CHZ) is used as a model pharmaceutical compound to investigate the equilibrium solubility, the influence of solvent and the operating conditions on the shape, and the size distribution. The solubility of CHZ is determined in organic solvents like Isopropanol, Ethanol, and 2-Ethoxyethylacetate, Ethylacetate and Ethyllactate using shake flask method from -5ºC to 60ºC. The solubility of CHZ in these solvents shows an increasing trend as the temperature increases in the following order: ethyllactate + water (0.5+0.5) < ethylacetate < isopropanol < ethanol < 2-ethoxyethylacetate < ethyllactate + water (0.75+0.25). The solvents, isopropanol, ethanol, and ethyl lactate, produce needle-shaped crystals, while 2-ethoxyethylacetate and ethyl acetate tend to produce plate shaped crystals. CHZ crystals obtained from 2-ethoxyethylacetate tend to have plate shaped crystals with a lower aspect ratio and are selected for batch cooling crystallization experiments performed at different cooling rates, and agitation. It is found that the agitation at 300 rpm and the cooling rate 0.2ºC/min produce more uniform crystal size distribution


Assuntos
Solventes/classificação , Clorzoxazona/análise , Cristalização/classificação , Solubilidade , Preparações Farmacêuticas/administração & dosagem
2.
Braz. J. Pharm. Sci. (Online) ; 58: e20584, 2022. tab, graf
Artigo em Inglês | LILACS | ID: biblio-1403761

RESUMO

Abstract Personalized medicine is gaining importance in pharmacotherapeutics as it allows tailoring the drug treatment to achieve the best patient response. Orodispersible film (ODF) is easy to formulate in hospitals, produces dose flexibility to suit an individual needs, particularly for patients suffer from swallowing issues or prohibited to take fluids. Sertraline Hydrochloride (SRT) was solubilized in several cosolvents, then different SRT ODFs based on five hydrophilic polymers namely; polyvinyl alcohol (PVA), hydroxylethyl cellulose (HEC), hydroxypropyl methylcellulose E5 LV (HPMC E5 LV), sodium alginate (NaAlg) and gelatin at two concentrations (2% and 4%) were developed and characterized. The outcomes were exposed to response surface analysis to obtain the desirability results to obtain the optimized formulation. Blended ODFs were developed from 4% PVA and 2% HEC in different blends and then potassium chloride (KCl) as a pore-forming agent was added to the best formulation to investigate its dissolution enhancement effect. F14 containing 4% PVA: 2% HEC 2:1 with 5% KCl showed best physicochemical properties of suitable pH (5.6), disintegration time (6 sec), good folding endurance which released 91 % SRT after 15 min. SRT ODF is an encouraging delivery system in the course of personalized medicine for the management of depression.


Assuntos
Solventes , Sertralina/análise , Medicina de Precisão , Excipientes , Otimização de Processos
3.
Braz. J. Pharm. Sci. (Online) ; 58: e191009, 2022. tab, graf
Artigo em Inglês | LILACS | ID: biblio-1394059

RESUMO

Nizatidine is an anti-secretogogue and a gastroprotective drug with a half-life of 1-2 h and is well absorbed in the stomach. This study aimed to optimize the process and develop floating microparticles of nizatidine that are based on low methoxyl pectin. Oil-in-oil dispersion method and Taguchi orthogonal array design were employed, and the prolonged residence time of the microparticles in the stomach was demonstrated. The constraints for independent variables, viz. A-polymer, B-internal solvent volume, C-surfactant, D-stirring rate and E-stirring time were set to generate the experimental runs. Particle size, percentage yield, micromeritic properties, entrapment efficiency, in vitro buoyancy and in vitro release were characterized. Surface morphology, zeta potential, in vitro release kinetics and in vivo floating performance of the optimized formulation was examined. The microparticles were free-flowing, irregular in shape and had a mean particle size distribution of 73-187 µ. Low methoxyl pectin played a predominant role in achieving buoyancy and optimum gastric retention for the modified release of the drug, suggesting Korsmeyer-Peppas model as the possible release mechanism. In vivo radiographic study in rabbits revealed that the drug was retained in the stomach for a period of 6 h. These results indicate that nizatidine floating microparticulate system provides modified drug release for the effective treatment of gastric ulcer


Assuntos
Animais , Masculino , Feminino , Coelhos , Estômago/efeitos dos fármacos , Nizatidina/antagonistas & inibidores , Eficiência/classificação , Solventes/efeitos adversos , Úlcera Gástrica/patologia , Técnicas In Vitro/instrumentação , Preparações Farmacêuticas/administração & dosagem , Cinética , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Liberação Controlada de Fármacos
4.
Braz. J. Pharm. Sci. (Online) ; 58: e18946, 2022. tab, graf
Artigo em Inglês | LILACS | ID: biblio-1364411

RESUMO

Abstract To investigate structure-property relationship of polymer-based curcumin solid dispersion (SD), three acrylic polymers were used to formulate curcumin SD by solvent evaporation method. Curcumin Eudragit EPO SD (cur@EPO), curcumin Eudragit RS PO SD (cur@RSPO) and curcumin Eudragit RL PO SD (cur@RLPO) showed deep red, golden orange and reddish orange color, respectively. Cur@RSPO entrapped 15.42 wt% of curcumin followed by cur@RL PO and cur@EPO. FTIR spectra indicated that in cur@EPO, curcumin may transfer hydrogen to the dimethylaminoethyl methacrylate group and thus change its color to red. In contrast, curcumin may form hydrogen bonding with Eudragit RS PO and Eudragit RL. Curcumin exists in amorphous state in three SDs as proved by differential scanning calorimetry and X-Ray diffraction measurement. In vitro digestion presented that lower pH value in simulated gastric fluid (SGF) stimulates the curcumin release from cur@EPO while permeability influences the release profile in other two SDs. When in simulated intestinal fluid (SIF), first order release model governs the release behaviors of all three SDs which showed sustained release pattern. Our results are helpful to elucidate how structure of polymer may impact on the major properties of curcumin contained SD and will be promising to broaden its therapeutic applications.


Assuntos
Polímeros , Curcumina/análise , Métodos , Solventes/administração & dosagem , Difração de Raios X/instrumentação , Técnicas In Vitro/métodos , Varredura Diferencial de Calorimetria/métodos , Evaporação/classificação , Espectroscopia de Infravermelho com Transformada de Fourier , Cor , Citrus sinensis/classificação , Concentração de Íons de Hidrogênio
5.
Rev. Ciênc. Plur ; 7(2): 61-73, maio 2021. tab
Artigo em Português | BBO - Odontologia, LILACS | ID: biblio-1282737

RESUMO

Introdução:Os sistemas adesivos possibilitama execução de restaurações estéticas e minimamente invasivas, sendo, portanto,objeto de pesquisas para contornar os problemas que se apresentam no procedimento restaurador.Objetivo:Avaliar in vitroa resistência de união de um sistema adesivo autocondicionante, e deste modificado com soluções extrativas de semente de uva.Metodologia:Duas soluções extrativas foram preparadas comextrato de semente de uva em pó dissolvido em acetona e etanol. A partir delas e de umadesivo,seis sistemas adesivos autocondicionantes experimentais foram preparados, diferindo quanto aosolvente utilizado eàsproporções entre adesivo puro e solução extrativa(7,5%, 15% e 30%). Setenta incisivos bovinos hígidos tiveram as raízes removidas com disco de carborundum e as faces vestibulares desgastadas comlixas d'água de granulação 120, 240, 600 e 1200 sob refrigeração até expor a dentina superficial. Os dentes foram distribuídos aleatoriamenteem sete grupos distintos: Controle; A7,5; A15; A30; E7,5; E15; e E30, contendo 10 elementos cada. A aplicação dos adesivos foi executada de acordo com as recomendações do fabricante do adesivo controle. A restauração foi realizada com uma matriz de silicone com dimensões 2mm de altura e 4mm de diâmetro e inserido o material restaurador em incremento único e fotopolimerizado por 40s. Após três meses armazenados em água destilada, os espécimes foram submetidos ao teste de resistência de união. Foi empregado ométodo estatísticoTeste Paramétrico Anova 1 Fator e pós-teste de Tamhane (p<0,05). Resultados:Os grupos A7,5, E7,5 e E30 não apresentaram diferença em relação ao grupo Controle; A15 e A30 mostraram desempenho estatisticamente semelhante entre si; e E15 não apresentou diferença estatística em relação aos outros adesivos.Conclusões:A adição de proantocianidina teve efeitos diferentes,dependendodos solventes e das concentrações utilizadas, mas sem alterar significativamente o desempenho do adesivo (AU).


Introduction:Adhesive systems make it possible to perform aestheticand minimally invasive restorations, being the subject of research to circumvent the problems that arise in the restorative procedure.Objective:Evaluate in vitrothe bond strength of a self-etching adhesive system,and modified with extractive grape seed solutions. Methodology:Two extractive solutions were prepared with powdered grape seed extract dissolved in acetone and ethanol. From them and an adhesive, six experimental self-etching adhesive systems were prepared, differing in terms of the solvent used and the proportions between pure adhesive and extractive solution(7.5%, 15% and 30%). Seventy healthy bovine incisors had their roots removed with carborundum disc and the vestibular faces were worn with sandpaper with granulation water 120, 240, 600 and 1200 under refrigeration until the superficial dentin was exposed. The teeth were randomly assigned to seven different groups: Control; A7.5; A15; A30; E7.5; E15; and E30, containing 10 elements each. The application of the adhesives was carried out according to the recommendations of the manufacturer of the control adhesive. The restoration was performed with a silicone matrix with dimensions 2mm high and 4mm indiameter and the restorative material was inserted in a single increment and light cured for 40s. After three months stored in distilled water, the specimens were submitted to the bond strength test. The statistical method Parametric Test Anova 1 Factor and Tamhane post-test (p<0.05) were used. Results:Groups A7.5, E7.5 and E30 showed no difference in relation to the Control group; A15 and A30 showed a statistically similar performance; and E15 showed no statistical difference in relation to the other adhesives. Conclusions:The addition of proanthocyanidin had different effects, depending on the solvents and concentrations used, but without significantly altering the performance ofthe adhesive (AU).


Introducción: Sistemas adhesivos permiten realizar restauraciones estéticas y mínimamente invasivas, siendo objeto de investigación para sortear problemas que surgen en elprocedimiento restaurador. Objetivo: Evaluar in vitrola fuerza de unión de un sistema adhesivoautograbante y modificado con soluciones extractivas de semilla de uva. Metodología: Se prepararon dos soluciones extractivas con extracto de semilla de uva en polvo disuelto en acetona y etanol. A partir de ellos y de un adhesivo, se prepararon seis sistemas experimentales de adhesivos autograbantes, que se diferencian en cuanto al solvente utilizado y las proporciones entre adhesivo puro y solución extractiva (7,5%, 15% y 30%). Setenta incisivos bovinos sanos fueron removidos con un disco de carborundo y las caras vestibulares fueron usadas com lija de agua de granulación 120, 240, 600 y 1200 bajo refrigeración hasta que la dentina superficial quedo expuesta. Los dientes se asignaron aleatoriamente a siete grupos diferentes: Control; A7,5; A15; A30; E7,5; E15; y E30, que contiene 10 elementos cada uno. La aplicación de los adhesivos se realizó siguiendo las recomendaciones del fabricante del adhesivo de control. La restauración se realizó con matriz de silicona con 2mm de altura y 4mm de diámetro y el material restaurador se insertó en un solo incremento y se fotopolimerizó durante 40s. Tres meses después, almacenados em agua destilada, las muestras se sometieron a la prueba de resistencia de la unión. Se utilizó el método estadístico Prueba Paramétrica Factor Anova 1 y post-prueba de Tamhane (p<0,05). Resultados: Los grupos A7,5, E7,5 y E30 no mostraron diferencias em relación con el grupo Control; A15 y A30 mostraron un desempeño estadísticamente similar; y E15 no mostró diferencia estadística en relación con los otros adhesivos. Conclusiones: La adición de proantocianidina tuvo diferentes efectos, dependiendo de los disolventes y concentraciones utilizadas, pero sin alterar significativamente el rendimiento del adhesivo (AU).


Assuntos
Animais , Bovinos , Polimento Dentário/instrumentação , Proantocianidinas , Resistência à Flexão , Solventes , Técnicas In Vitro/métodos , Brasil , Estudos de Intervenção , Análise de Variância , Cimentos Dentários/química , Extrato de Sementes de Uva
6.
Artigo em Inglês | LILACS, BBO - Odontologia | ID: biblio-1155012

RESUMO

ABSTRACT Objective: To investigate the difference of chemical bonds between urethane dimethacrylate (UDMA) bonding agents with ethanol solvent and acetone solvent on dentin collagen. Material and Methods: This experimental comparison study used three groups: G1 (Control): UDMA and collagen; G2: UDMA, collagen and ethanol; and G3: UDMA, collagen and acetone. The groups were then pelleted and analysed with FTIR, then the peak value of carbonyl absorption band from each study group was calculated. The result of FTIR analysis and the peak of carbonyl absorption band (P) was calculated using the formula: P = (BC / AB) X 100; AB. BC is measured in centimeters. The study of chemical bond differences between ethanol-solvent UDMA agents compared with acetone-solvent on dentin collagen resulted in a graph of peak of carbonyl absorption bands of UDMA and dentin collagen groups. To determine the chemical bonds of UDMA from the top of the carbonyl ester absorption bands with wavenumber absorption in range 1700-1750 cm-1, the decreasing peak of the carbonyl absorption bands is assumed as more chemical bonds that formed. Data were analysed using Anova one way and Tukey HSD test. Results: There were significant differences between the three study groups (p<0.05). Conclusion: UDMA bonding agents' chemical bonds with acetone solvent are much higher than the chemical bonds between UDMA bonding agents with ethanol solvent on dentin collagen.


Assuntos
Colagem Dentária/instrumentação , Materiais Dentários , Dentina , Etanol/química , Solventes/química , Estudos de Intervenção , Análise de Variância , Colágeno/química , Estatísticas não Paramétricas , Indonésia
7.
Acta odontol. latinoam ; 33(2): 135-142, Sept. 2020. graf
Artigo em Inglês | LILACS | ID: biblio-1130744

RESUMO

ABSTRACT This study evaluated the influence of the mode and time of solvent evaporation on the tensile strength (TS), flexural strength (FS) and elastic modulus (EM) of two adhesive systems: Scotchbond Multipurpose (SBMP) and Clearfil SE (CSEB). For this purpose, rectangular samples (2x1x7 mm) were prepared with 10 μL of primer and the solvents were evaporated with air spray at (23±1) ºC, (40±1) ºC and negative control (without spray). For each temperature, the times of 5, 20, 30, and 60 seconds were investigated. The statistical results showed that evaporation at 40±1ºC resulted in better EM for the two adhesives tested and all the evaporation times evaluated. However, there were no significant differences between the times and modes of evaporation for TS. The results of this study indicate that evaporation at a temperature of (40±1) °C could improve the elastic modulus of both adhesives tested, regardless of the evaporating time.


RESUMO Este estudo avaliou a influência do modo e do tempo de evaporação do solvente na resistência à tração (RT), resistência à flexão (RF) e módulo de elasticidade (MR) de dois sistemas adesivos: Scotchbond Multipurpose (SBMP) e Clearfil SE (CSEB). Para isso, amostras retangulares (2x1x7 mm) foram preparadas com 10 μL de primer e os solventes foram evaporados com aerossol a (23±1) ºC, (40±1) ºC e controle negativo (sem aerossol). Para cada temperatura, foram avaliados os tempos de 5, 20, 30 e 60 segundos. Os resultados estatísticos mostraram que a evaporação a (40±1) ºC resultou em melhor MR para os dois adesivos testados e todos os tempos de evaporação avaliados. No entanto, não houve diferenças significativas entre os tempos e modos de evaporação na RT. Os resultados deste estudo indicam que a evaporação a uma temperatura de (40±1) °C poderia melhorar o módulo de elasticidade de ambos os adesivos testados, independentemente do tempo de evaporação.


Assuntos
Humanos , Solventes/farmacologia , Resistência à Tração , Adesivos/química , Adesivos Dentinários/química , Cimentos Dentários/química , Volatilização , Teste de Materiais , Dessecação
8.
Rev. salud pública ; 22(3): e201, May-June 2020. tab, graf
Artigo em Espanhol | LILACS | ID: biblio-1150172

RESUMO

RESUMEN Objetivo Evaluar la frecuencia de micronúcleos (MN) e influencia de los polimorfismos en los genes del metabolismo GSTM1 y GSTT1 como biomarcadores de riesgo de cáncer en pintores de carros (n=152) con respecto a individuos no expuestos (n=152). Métodos Estudio Epidemiológico Molecular, tipo Corte Transversal analítico, interacción gen-ambiente. La evaluación de MNs y polimorfismos genéticos se determinó con pruebas moleculares en linfocitos de los individuos objeto de estudio. Resultados Se determinó que la frecuencia de MNs es 1.6 más alta en el grupo expuesto con relación al grupo referente (1.39±0.92 versus 0,87±0.78, p<0,0001). No se determinó un incremento en la frecuencia de MNs asociado a los polimorfismos en GSTM1 y GSTT1. Conclusiones El incremento de MNs en pintores de carros sirve para alertar al incremento de riesgo de cáncer en esta población expuesta a solventes orgánicos. Estos resultados pueden servir en Programas de Vigilancia Epidemiológica Ocupacional, como estrategia de prevención y en otros países con un amplio sector informal de individuos expuestos a estos químicos para reducir el riesgo de cáncer.(AU)


ABSTRACT Objective To evaluate the frequency of micronuclei (MNs) and influence of GSTM1 and GSTT1 gene polymorphisms as biomarkers of cancer risk in car painters (n=152) compared to unexposed individuals (n=152). Methods Molecular epidemiology study, cross-sectional analysis of gen and environment interaction. The evaluation of MN and genetic polymorphisms was determined by molecular tests in lymphocytes from subjects involved in the study. Results It was determined that the frequency of MNs is 1.6 higher in the exposed group compared to the reference group (1.39 ± 0.92 versus 0.87 ± 0.78, p<0.0001). There was no increase in the frequency of MNs associated with the polymorphisms in GSTM1 and GSTT1. Conclusions The increase of MNs in car painters serves to alert the increased risk of cancer in this population exposed to organic solvents. These results can be used in Occupational Epidemiological Surveillance Programs, as a prevention strategy and policies to regulate and control the use of solvents at a national level and in other countries with a large informal sector of individuals exposed to these chemicals to reduce the risk of cancer.(AU)


Assuntos
Humanos , Solventes/efeitos adversos , Exposição Ocupacional/prevenção & controle , Predisposição Genética para Doença/prevenção & controle , Neoplasias/prevenção & controle , Testes para Micronúcleos , Estudos Epidemiológicos , Estudos Transversais
9.
Colomb. med ; 51(1): e3646, Jan.-Mar. 2020. tab
Artigo em Inglês | LILACS | ID: biblio-1124610

RESUMO

Abstract Introduction: Car painters are routinely exposed to organic solvents classified as carcinogenic and mutagenic substances. Objective: To characterize the population susceptibility and evaluate the genotoxic effects of exposure to organic solvents. Methods: A cross-sectional study comparing a group of car painters exposed to organic solvents with a non-exposed group. CYP2E1 polymorphisms and the presence of micronuclei in lymphocytes were determined. Results: One hundred twenty-two workers participated in the study: 62 who worked in car paint shops and were exposed to solvents, and 60 who were not exposed. There were statistically significant differences between the two groups regarding micronucleated cells and nucleoplasmic bridges frequencies (p=0.042 and p=0.046, respectively; exact likelihood ratio). Significant differences were found at the interaction between the CYP2E1 genotype c1c1 and occupational exposure to solvents, with higher frequencies of micronuclei (p= 0.013) and micronucleated cells (p= 0.015). However, when the frequencies of micronuclei, micronucleated cells and nucleoplasmic bridges in the exposure group were compared between the c1c1 and c2c2/c1c2 allele groups of the CYP2E1 polymorphism, statistically significant differences were found. Conclusions: This study confirms that when workers with CYP2E1 polymorphisms, specifically the c1c1 genotype, are exposed to organic solvents, they are more likely to have somatic cell mutations, a condition associated with increased susceptibility to diseases such as cancer


Resumen Introducción: Los pintores de vehículos automotores están rutinariamente expuestos a agentes como los solventes orgánicos, capaces de producir efectos mutágenos y carcinógenos. Objetivo: Caracterizar la susceptibilidad poblacional y evaluar los efectos genotóxicos debidos a la exposición a solventes orgánicos. Métodos: Estudio de corte transversal que comparó a un grupo de pintores de carros expuestos a solven tes orgánicos con un grupo de personas no expuestas. Fueron determinados tanto los polimorfismos de CYP2E1 como la presencia de micronúcleos en linfocitos. Resultados: Participaron 122 personas, 62 trabajadores de talleres de pintura de autos expuestos a solventes y 60 personas no expuestas. Con relación al cuestionario Q 16, 32% de los expuestos refirieron síntomas sugestivos de neurotoxicidad. Las frecuencias de células micronucleadas y de puentes nucleoplásmicos fueron significativamente mayores en los expuestos que en los no expuestos: p= 0.042 y p= 0.046, respectivamente, Razón de verosimilitud exacta). Fueron halladas diferencias significativas en la interacción de CYP2E1 (c1c1) y la exposición ocupacional a solventes, con mayores frecuencias de micronúcleos (p= 0.013) y de células micronucleadas (p= 0.015). Conclusiones: Este estudio reafirma que los trabajadores expuestos a solventes orgánicos con polimorfismos de CYP2E1, específicamente con genotipo c1c1, tienen mayor probabilidad de presentar mutaciones en las células somáticas, condición asociada con una mayor susceptibilidad a enfermedades como el cáncer


Assuntos
Adulto , Humanos , Masculino , Pessoa de Meia-Idade , Pintura/toxicidade , Solventes/toxicidade , Carcinógenos/toxicidade , Exposição Ocupacional/efeitos adversos , Citocromo P-450 CYP2E1/genética , Polimorfismo Genético , Automóveis , Polimorfismo de Fragmento de Restrição , Linfócitos/efeitos dos fármacos , Linfócitos/ultraestrutura , Testes para Micronúcleos/métodos , Estudos de Casos e Controles , Estudos Transversais , Colômbia , Síndromes Neurotóxicas/diagnóstico , Alelos , Equipamento de Proteção Individual , Testes de Mutagenicidade
10.
Rev. bras. med. trab ; 18(1): 103-108, jan-mar.2020.
Artigo em Português | LILACS | ID: biblio-1116154

RESUMO

Introdução: Fatores de risco associados ao trabalho podem causar, entre outros, câncer de colo uterino. Objetivo: Identificar na literatura especializada a associação entre câncer de colo de útero e a exposição aos fatores ocupacionais de risco. Métodos: Realizou-se um levantamento bibliográfico em bases de dados eletrônicos com os seguintes descritores: câncer de colo uterino e riscos ocupacionais. Resultados: Trabalhadores expostos ao tabaco nas fábricas de cigarro, fluidos de motores, exposição ocupacional a fungos e bactérias e ao tetracloroetileno, presente em produtos de limpeza usados em lavanderias e para desengraxar metais, estariam mais susceptíveis ao desenvolvimento de câncer de colo uterino. Conclusão: Há poucos estudos que identificam a relação entre o câncer de colo de útero e os fatores de risco ocupacional, dificultando a associação entre o carcinogênese e o fator de risco.


Background: Occupational risk factors are associated with many types of neoplasms including cervical cancer. Objective: To review the specialized literature for evidence on the relationship between cervical cancer and exposure to occupational hazards. Methods: Literature search in electronic databases using keywords cervical cancer and occupational risk. Results: Workers occupationally exposed to tobacco, fungi or bacteria, metalworking fluids and tetrachloroethylene used in dry cleaning and for metal degreasing exhibited higher susceptibility to cervical cancer. Conclusion: Few studies sought to investigate relationships between cervical cancer and occupational hazards, which hinders the attempts at establishing a causal link.


Assuntos
Humanos , Feminino , Riscos Ocupacionais , Neoplasias do Colo do Útero/etiologia , Doenças Profissionais/etiologia , Solventes/efeitos adversos , Tetracloroetileno/efeitos adversos , Infecções Bacterianas/complicações , Fatores de Risco , Produtos do Tabaco/efeitos adversos , Micoses/complicações
11.
Arq. Asma, Alerg. Imunol ; 4(1): 121-128, jan.mar.2020. ilus
Artigo em Inglês | LILACS | ID: biblio-1381795

RESUMO

Introduction: Allergen proteins found in dust mite extracts, such as Dermatophagoides farinae (DF), Dermatophagoides pteronyssinus (DP) and Tyrophagus putrescentiae (TP), are relevant for scientific studies in the allergy and immunotherapy fields. The precipitation/concentration of protein extracts may favor the aggregation of the allergens in homogenates. Objective and method: This paper investigates the precipitation process by submitting crude mite extracts to compounds such as ammonium sulfate (NH4)2SO4, trichloroacetic acid (TCA) and acetone. Results: The best results were obtained by fractionation with (NH4)2SO4 at 80% (w/v) saturation (~0° C), observing the protein markings on the electrophoresis gel. Major allergens were identified by immunoblot at 25 kDa (cysteine protease) for Der f and Der p; and 25 kDa, 30 kDa (tropomyosin) and Try p 3, near 26 kDa. For this percentage the total protein contents were 12.83 mg mL-1 for Der f, 24.78 mg mL-1 for Der p and 27.35 mg mL-1 for Try. Conclusion: An advantage of precipitation with (NH4)2SO4 over precipitation with acetone was the possibility of gradually obtaining protein fractions, which does not happen when using the latter. The addition of 80% (v/v) acetone to the mite extracts favored total protein precipitation in the concentrations 16.42 mg mL-1, 28.47 mg mL-1 and 13.41 mg mL-1. The use of TCA in concentrations above 20% (w/v) forms peptides that are not retained in the gel under the established experimental conditions, and dilute solutions of this acid are more efficient.


Introdução: As proteínas alergênicas presentes nos extratos dos ácaros de poeira, tais como Dermatofagoides farinae (DF), Dermatofagoides pteronyssinus (DP) e Tyrophagus putrescentiae (TP) são relevantes para estudos científicos na área de alergias e aplicação em imunoterapias. A precipitação/concentração desses extratos proteicos pode favorecer a agregação de alérgenos nos homogenatos. Objetivo e método: O trabalho investiga o processo de precipitação, submetendo os extratos brutos de ácaros de poeira a compostos como sulfato de amônio (NH4)2SO4, ácido tricloroacético (ATC) e acetona. Resultados: Os melhores resultados foram obtidos por fracionamento com (NH4)2SO4 em 80% (m/v) de saturação (~ 0°C), observando as marcações proteicas no gel de eletroforese. Os alérgenos principais foram identificados por immunoblot em 25 kDa (cisteína protease) para Der f 1 e Der p 1; e 25 kDa, 33 kDa (tropomyosin), 11 kDa para Tyr. Para esse percentual, os teores de proteína total foram de 12.83 mg mL-1 para DF; 24,78 mg mL-1 para DP; e 27,35 mg mL-1 para TP. Conclusão: A vantagem da precipitação com (NH4)2SO4 frente à precipitação com acetona foi a possibilidade de gradativamente se obter frações proteicas, o que não acontece quando utilizado esse solvente. A adição de 80% (v/v) de acetona aos extratos de ácaros favoreceu a precipitação total de proteína nas concentrações 16,42 mg mL-1; 28,47 mg mL-1; e 13,41 mg mL-1. O uso de ATC em concentrações acima de 20% (m/v) forma peptídeos que não são retidos no gel nas condições experimentais estabelecidas, sendo eficiente soluções mais diluídas desse ácido.


Assuntos
Humanos , Tropomiosina , Dermatophagoides farinae , Dermatophagoides pteronyssinus , Cisteína Proteases , Sulfato de Amônio , Ácaros , Acetona , Peptídeo Hidrolases , Solventes , Ácidos , Alérgenos , Proteínas , Poeira , Hipersensibilidade
12.
Salud pública Méx ; 61(5): 670-677, sep.-oct. 2019. tab
Artigo em Inglês | LILACS | ID: biblio-1127330

RESUMO

Abstract: Objective: To assess neuropsychological performance among workers at a paint factory in Mexico City. Materials and methods: During 2004 and 2005 we assessed the neuropsychological performance of 208 workers who were exposed to organic solvents at a paint factory, mainly toluene and xylene. We categorized workers into low and high exposure groups using a cumulative index for toluene, based on times spent in different tasks. We evaluated cognitive and motor functions with 13 neuropsychological tests. Results: We found lower attention, longer time to complete the test β=5.5 (R2=12.3%), and a lower score in the motor-cognitive test β=-15.7 (R2=19.5%) in the high exposure group through multiple linear regression model analysis, with adjustment for age and education. Conclusion: Our results are similar to the ones reported in the literature, but the effects are less severe, probably due to lower exposure to organic solvents.


Resumen: Objetivo: Evaluar el desempeño neuropsicológico de los trabajadores de una fábrica de pintura en la Ciudad de México. Material y métodos: Se evaluó el desempeño neuropsicológico de 208 trabajadores expuestos a disolventes orgánicos, principalmente tolueno y xileno, en una fábrica de pintura en la Ciudad de México durante 2004 y 2005. Se categorizaron en grupos de baja y alta exposición con un índice acumulado de tolueno con base en el tiempo empleado por actividad. Se evaluaron funciones motoras y cognitivas con 13 pruebas neuropsicológicas. Resultados: Se registró un tiempo más largo para completar la prueba β=5.5 (R2=12.3%) y una puntuación baja en la prueba motor-cognitiva de β=-15.7 (R2=19.5%) en el grupo de alta exposición en los modelos de regresión lineal múltiple, ajustados por confusores. Conclusión: Los presentes resultados son similares a los reportados en la literatura, aunque los efectos son menos graves, probablemente debido a la baja exposición.


Assuntos
Humanos , Masculino , Adulto , Pintura/toxicidade , Desempenho Psicomotor/efeitos dos fármacos , Atenção/efeitos dos fármacos , Solventes/toxicidade , Exposição Ocupacional/efeitos adversos , Fatores de Tempo , Tolueno/toxicidade , Xilenos/toxicidade , Modelos Lineares , Estudos Transversais , Fatores Etários , Escolaridade , México , Testes Neuropsicológicos
13.
Biomédica (Bogotá) ; 39(3): 464-477, jul.-set. 2019. tab, graf
Artigo em Espanhol | LILACS | ID: biblio-1038807

RESUMO

Resumen Introducción. La exposición a solventes orgánicos y pinturas se ha asociado con efectos genotóxicos y mayor riesgo de neoplasias. Sin embargo, aún no se ha caracterizado bien el tipo de daño que esta exposición induce en el ADN humano, ni los mecanismos por los cuales se genera. Uno de los grupos con mayor exposición a dichos solventes y pinturas son los pintores de automóviles del sector informal que trabajan sin adecuadas prácticas de seguridad ocupacional. Objetivo. Determinar el daño oxidativo y por metilación del ADN de linfocitos de pintores de automóviles expuestos a solventes orgánicos y pinturas. Materiales y métodos. Se analizaron linfocitos aislados de sangre periférica de 62 pintores y 62 sujetos no expuestos mediante el ensayo cometa de gran eficiencia acoplado a las enzimas Fpg y AlkA. Las categorías de daño en el ADN evaluadas fueron el daño basal (sin enzimas), el daño oxidativo y el daño por metilación, y el parámetro de medición, el porcentaje de ADN en la cola. Resultados. El porcentaje de ADN en la cola fue mayor en el grupo expuesto con respecto al no expuesto (p<0,05). En el grupo expuesto, dicho porcentaje fue mayor en la categoría de daño oxidativo comparado con la del basal (16,50 Vs. 12,87; p<0,001), en tanto que en el daño por metilación no se encontraron diferencias significativas (14,00 Vs. 12,87; p>0,05). Conclusión. La exposición a solventes orgánicos y pinturas se asoció con el aumento de las lesiones oxidativas del ADN de los linfocitos de pintores de automóviles, tales como la producción de 8-oxo-2'-desoxiguanosina (8-oxodG) y otros productos formamidopirimidina, los cuales se consideran considerablemente mutagénicos.


Abstract Introduction: The exposure to organic solvents and paints has been associated with genotoxicity and a greater risk of neoplasms. However, the type of DNA damage induced in humans by the exposure to these compounds, which would help explain the mechanisms of their genotoxicity, is still not fully characterized. Due to inadequate practices of occupational safety, car painters in the informal sector are a highly exposed group to organic solvents and paints. Objective: To identify the oxidative and methylating damage in the DNA of lymphocytes of car painters exposed to organic solvents and paints. Materials and methods: Isolated peripheral blood lymphocytes from 62 painters and 62 unexposed subjects were analyzed by the modified high-throughput comet assay with the Fpg and AlkA enzymes. The categories used for the evaluation of the DNA damage were basal damage (without enzymes), oxidative and methylating damage. The measurement parameter used to establish the damage was the percentage of DNA in the tail. Results: The percentage of DNA in the tail was higher in the exposed group compared to the unexposed group (p<0.05). In the exposed group, this percentage was higher in the oxidative damage category than the baseline (16.50 vs. 12.87; p<0.001), whereas methylating damage did not show significant differences (14.00 vs. 12.87; p>0.05). Conclusion: In this study, exposure to organic solvents and paints was associated with an increase in oxidative lesions in the DNA of car painters' lymphocytes, such as the production of 8-oxodG and other formamidopyrimidine products which are considered highly mutagenic.


Assuntos
Adulto , Humanos , Masculino , Pessoa de Meia-Idade , Adulto Jovem , Pintura/toxicidade , Solventes/toxicidade , Dano ao DNA , Exposição Ocupacional/efeitos adversos , Estresse Oxidativo , Metilação de DNA , Automóveis , DNA/efeitos dos fármacos , Linfócitos/efeitos dos fármacos , Estudos de Casos e Controles , Sobrevivência Celular , Estudos Transversais , Ensaio Cometa , Mutagênicos/toxicidade
14.
Braz. dent. j ; 30(3): 208-212, May-June 2019. tab, graf
Artigo em Inglês | LILACS | ID: biblio-1011546

RESUMO

Abstract The most common main materials for dentin bonding for composite resin restoration is 2-hydroxyethyl methacrylate (HEMA). HEMA has beneficial physical and chemical properties, and stable, yet toxic. The addition of ethanol or water, may reduce the toxic effect of HEMA. Ethanol solvent has lower H-bonding capacity compared to water solvent, so it can bind less free radicals from the residual monomer. This study aimed to analyze apoptosis due to dentine bonding application with ethanol and water solvent. Fibroblast culture cells were obtained from extracted third molar, by means of tripsinasion method. The cells were divided into 4 groups as reached confluent: cell culture without treatment as control, cell culture with scaffold chitosan, cell culture with scaffold and polymerized dentin bonding with ethanol or water solvent. Apoptosis observation was conducted using immunohistochemistry method with ethidium bromide acridin orange staining, under fluorescent microscope with 40´ magnification. There was a significant difference among groups (p=0.0001), yet no differences found between different solvent. Apoptosis rate in fibroblast cells culture exposed to HEMA bonding with ethanol solvent was 67%, while the cells exposed to HEMA bonding with water solvent was 44%. The effect of dentin bonding with ethanol solvent and water solvent towards apoptosis rate of pulp fibroblast cells is not different.


Resumo Os principais materiais para adesão dentinária em restaurações de resina composta são o 2-hidroxietil metacrilato (HEMA). O HEMA possui propriedades físicas e químicas benéficas e estáveis, ainda que tóxicas. A adição de etanol ou água pode reduzir o efeito tóxico do HEMA. O solvente etanol possui uma menor capacidade de ligação H em comparação com o solvente água, de modo que pode ligar menos radicais livres do monômero residual. Este trabalho teve como objetivo analisar a apoptose pela aplicação de adesivos dentinários com solventes etanol e água. Células de cultura de fibroblastos foram obtidas a partir do terceiro molar extraído, por meio do método de tripsinaion. As células foram divididas em 4 grupos como confluentes: cultura celular sem tratamento como controle, cultura celular com arcabouço de quitosana, cultura celular com arcabouço e adesivo dentinário polimerizado com solvente etanol ou água. A observação da apoptose foi realizada utilizando o método imunohistoquímico com coloração com brometo de etídio e acridina laranja, sob microscópio de fluorescência com aumento de 40´. Houve uma diferença significativa entre os grupos (p = 0,0001), mas não houve diferenças entre os solventes. A taxa de apoptose em cultura de células de fibroblastos expostos à adesão baseada em HEMA com solvente etanol foi de 67%, enquanto as células expostas à adesão baseada em HEMA com solvente de água foi de 44%. O efeito da adesão dentinária com solvente etanol e solvente água sobre a taxa de apoptose de células de fibroblastos de polpa não é diferente.


Assuntos
Colagem Dentária , Etanol , Solventes , Teste de Materiais , Água , Adesivos Dentinários , Apoptose , Dentina , Fibroblastos , Metacrilatos
15.
Braz. dent. j ; 30(3): 272-278, May-June 2019. tab, graf
Artigo em Inglês | LILACS | ID: biblio-1011552

RESUMO

Abstract The aim of this study was to use the isobornyl methacrylate (IBOMA) as a combining or substituent diluent monomer in the resin matrix of dental resin composites. Thus, the resin matrix was formulated with 60 wt% of BisGMA and 40 wt% of diluent monomers. TEGDMA as the only diluent monomer was used as control with 40 wt%, while total substitution of TEGDMA was done with 40 wt% of IBOMA. The combination of IBOMA and TEGDMA was done with 20 wt% of each monomer. To the resin matrix, 65 wt% of filler particles was added. Degree of conversion (DC) using FT-IR, flexural strength (FS), flexural modulus (FM), polymerization shrinkage by gap formation (GF), Knoop hardness (KH) and solvent degradation (SD) were evaluated. Data were analyzed using ANOVA and Tukey's test (α=0.05; b=0.2). The results showed that reducing or substituting TEGDMA using IBOMA did not affect the DC (0.085), FS (p=0.886) or FM (p=0.414). Also, when IBOMA was used, lower GF was found in comparison to the control containing only TEGDMA as the diluent monomer (p=0.032). However, even though all composites presented reduction in KH during the SD test, the combination of IBOMA and TEGDMA showed similar reduction in KHN in comparison to the control group (p=0.001), while the total substitution of TEGDMA with IBOMA decreased KHN after SD (p=0.041). Thus, the combination of IBOMA and TEGDMA seem to reduce SD and GF without affecting the properties of resin composites.


Resumo O objetivo nesse estudo foi utilizar o isobornil metacrilato (IBOMA) como monômero combinante ou substituinte na matriz resinosa de resinas compostas odontológicas. Para tanto, a matriz resinosa foi formulada com 60 % em peso de BisGMA e 40 % em peso de monômero diluente. O TEGDMA foi utilizado como único monômero diluente para o grupo controle com 40 % em peso, enquanto a substituição total de TEGDMA foi feita com 40 % em peso de IBOMA. Na combinação de IBOMA e TEGDMA foram utilizados 20 % em peso de cada monômero. Na matriz resinosa, 65 % em peso de partículas de carga foi adicionado. O grau de conversão (GC) utilizando FT-IR, a resistência flexural (RF), o módulo flexural (MF), a contração de polimerização por formação de gap (FG) utilizando Microscopia Confocal à Laser, a Dureza Knoop (DK) e a degradação em solvente (DS) foram avaliados. Todos os dados foram analisados utilizando ANOVA e teste de Tukey (α=0.05; b=0.2). Os resultados demonstraram que reduzindo ou substituindo o TEGDMA utilizando o IBOMA não afetou o GC (p=0.085), a RF (p=0.886) ou o MF (p=0.414). Ainda, quando o IBOMA foi utilizado como um monômero combinante ou substituinte, menor FG foi observada em comparação ao controle contendo apenas TEGDMA como monômero diluente (p=0.032). Contudo, apesar de todos os compósitos terem apresentados redução na DK durante o teste de DS, a combinação de IBOMA e TEGDMA demonstrou uma redução na DK similar ao grupo (p=0.001), enquanto a substituição total de TEGDMA com IBOMA reduziu a DK após DS (p=0.041). Dessa forma, a combinação do IBOMA e TEGDMA parece reduzir DS e a FG sem afetar as propriedades de resinas compostas.


Assuntos
Resinas Compostas , Metacrilatos , Polietilenoglicóis , Ácidos Polimetacrílicos , Solventes , Teste de Materiais , Bis-Fenol A-Glicidil Metacrilato , Espectroscopia de Infravermelho com Transformada de Fourier , Polimerização
16.
Hig. aliment ; 33(288/289): 1289-1293, abr.-maio 2019. graf
Artigo em Português | LILACS, VETINDEX | ID: biblio-1482147

RESUMO

A moringa (Moringa oleifera Lam) é uma hortaliça arbórea que apresenta uma grande versatilidade, sendo cultivada em vários países. No presente estudo, foi avaliado o teor de compostos bioativos de diferentes extratos das folhas e sementes e da mistura folhas e sementes (F+S) de moringa. Os extratos foram obtidos com água destilada e com os solventes acetona, metanol e etanol nas concentrações de 40% e 80%. Os extratos da junção de F+S de moringa extraídos com acetona a 80% apresentaram maior teor de compostos fenólicos (1.715,7 mg EAG/100g de resíduo em base seca), quando comparado aos extratos de folhas e sementes (1.479,7 mg EAG/100g de resíduo em base seca e 326,1mg QCA/100g de resíduo em base seca, respectivamente). Os solventes etanol e acetona foram os que apresentaram maior capacidade de extração de compostos fenólicos totais e flavonoides totais, nos resíduos estudados. Os resíduos de moringa demonstraram potencial para serem utilizados como fonte natural de compostos bioativos.


Assuntos
Compostos Fenólicos/análise , Extratos Vegetais/análise , Flavonoides/análise , Moringa oleifera/química , Compostos Fitoquímicos/análise , Solventes/administração & dosagem
17.
Pesqui. bras. odontopediatria clín. integr ; 19(1): 4438, 01 Fevereiro 2019. tab, graf
Artigo em Inglês | LILACS, BBO - Odontologia | ID: biblio-997924

RESUMO

Objective: To evaluate the effect of a synthetic inhibitor of MMPs (Galardin) and its solvents [ethanol and dimethyl sulfoxide (DMSO)] on the microtensile bond strength (µTBS) of adhesive systems to dentin. Material and Methods: Sound human third molars (n=180) were randomly assigned into 5 based on solution type: DMSO; ethanol; Galardin + DMSO; Galardin + ethanol; and distilled water as control. Then were further subdivided into 6 based on the adhesive system, i.e. 3-step and 2-step etch-and-rinse (ER), one-step and 2-step self-etch (SE) and universal in ER and SE strategies. The samples underwent a 500-round thermocycling procedure at 5±5/55±5°C and were sectioned into 1-mm2 pieces perpendicularly in a cutting machine. The µTBS was measured at a strain rate of 1 mm/min. Data were analyzed with two-way ANOVA and post hoc Games-Howell tests (p<0.05). Results: The adhesive system and the solution had significant effects on the µTBS (p<0.001). The universal adhesive in the SE mode resulted in a significant decrease in µTBS compared to the other adhesives (p<0.05). Ethanol, too, resulted in a significant decrease in µTBS compared to other solutions (p<0.05). Conclusion: Galardin and its solvents, except for ethanol, had no detrimental effects on the immediate µTBS.


Assuntos
Humanos , Inibidores de Proteases , Solventes/análise , Resistência à Tração , Materiais Dentários , Dente Serotino , Técnicas In Vitro/métodos , Dimetil Sulfóxido/efeitos adversos , Análise de Variância , Cimentos Dentários , Irã (Geográfico)
18.
Braz. arch. biol. technol ; 62: e19180370, 2019. tab
Artigo em Inglês | LILACS | ID: biblio-1055412

RESUMO

Abstract Research on the bio-activities and chemical composition of roasted C. intybus roots from India is very little. In present studies GC-MS analysis of volatile components of roasted C. intybus roots, phenolics and flavonoid content estimation and antioxidant potential of roasted C. intybus roots was carried out. Antioxidant potential was also evaluated using FRAP, DPPH, hydroxyl radical, nitric oxide and superoxide free radical scavenging method. Extracts were prepared by sequential Soxhlet extraction. GC-MS analysis of volatile components of roasted C. intybus root extracts revealed that 5-hydroxymethyl furfural was major volatile component in dichloromethane and methanol extract whereas lupeol and its derivative compounds were major constituents of hexane extract. Quantitative estimation for total phenols and flavonoids showed that the methanol extract of C. intybus roots contained highest phenolic and flavonoid content as compared to other extracts and also showed strong radical scavenging activities which were comparable with ascorbic acid used as standard. All extracts showed IC50 values less than 0.6 mg/mL furthermore, extracts of roasted C. intybus showed the high total antioxidant potential for the reduction of Fe3+ to Fe2+. The C. intybus roots possess good antioxidant capacity even after roasting and all the extracts showed good activities.


Assuntos
Chicória/química , Antioxidantes , Solventes , Compostos Fitoquímicos
19.
Electron. j. biotechnol ; 35: 1-9, sept. 2018. graf, tab
Artigo em Inglês | LILACS | ID: biblio-1047456

RESUMO

Background: Aspergillus ochraceus was isolated from coffee pulp and selected as an interesting hydroxycinnamoyl esterase strain producer, using an activity microplate high-throughput screening method. In this work, we purified and characterized a new type C A. ochraceus feruloyl esterase (AocFaeC), which synthesized specifically butyl hydroxycinnamates in a ternary solvent system. Results: AocFaeC was produced by solid state fermentation, reaching its maximal activity (1.1 U/g) after 48 h of culture. After purification, the monomeric protein (34 kDa) showed a specific activity of 57.9 U/mg towards methyl ferulate. AocFaeC biochemical characterization confirmed its identity as a type C feruloyl esterase and suggested the presence of a catalytic serine in the active site. Its maximum hydrolytic activity was achieved at 40°C and pH 6.5 and increased by 109 and 77% with Ca2+ and Mg2+, but decreased by 90 and 45% with Hg2+ and Cu2+, respectively. The initial butyl ferulate synthesis rate increased from 0.8 to 23.7 nmol/min after transesterification condition improvement, using an isooctane:butanol:water ternary solvent system, surprisingly the synthesis activity using other alcohols was negligible. At these conditions, the synthesis specific activities for butyl p-coumarate, sinapinate, ferulate, and caffeate were 87.3, 97.6, 168.2, and 234 U/µmol, respectively. Remarkably, AocFaeC showed 5 folds higher butyl caffeate synthesis rate compared to type B Aspergillus niger feruloyl esterase, a well-known enzyme for its elevated activity towards caffeic acid esters. Conclusions: Type C feruloyl esterase from A. ochraceus is a butanol specific biocatalyst for the synthesis of hydroxycinnamates in a ternary solvent system


Assuntos
Aspergillus ochraceus/enzimologia , Hidrolases de Éster Carboxílico/metabolismo , Ácidos Cumáricos/síntese química , Solventes , Espectrofotometria , Hidrolases de Éster Carboxílico/isolamento & purificação , Cromatografia , Café , Butanóis , Eletroforese , Fermentação
20.
Biosci. j. (Online) ; 34(5): 1349-1356, sept./oct. 2018.
Artigo em Inglês | LILACS | ID: biblio-967325

RESUMO

The subject of free radicals and their effects on biological systems is an important problem in Medicine. Antioxidants can protect biological systems against free radicals. In this study, the effect of methanol ratio (0, 20, 50, 80, and 100%) in water on extraction yield of Total phenolic (TP) compounds and antioxidant activity (AA) of Stachys turcomanica extract were evaluated. The amount of TP compounds were determined using Folin-Ciocalteu reagent, and AA measured by 2, 2-diphenyl-1-picrylhydrazyl (DPPH), ferric reducing antioxidant power (FRAP) and betacaroten linoleic acid methods. The results showed extraction of phenolic compounds and their AA were affected by solvent combinations. In addition, there was a good correlation between TP content and AA of Stachys turcomanica extracts. Finally the methanol: water (80:20) was good solvent in extracting of phenolic compounds with highest AA.


O tema dos radicais livres e seus efeitos nos sistemas biológicos é um problema importante na medicina. Os antioxidantes podem proteger os sistemas biológicos contra os radicais livres. Neste estudo, avaliou-se o efeito da proporção de metanol (0, 20, 50, 80 e 100%) na água com o rendimento de extração de compostos fenólicos totais (TP) e atividade antioxidante (AA) do extrato Stachys turcomanica. A quantidade de compostos de TP foi determinada utilizando o reagente de Folin-Ciocalteu, e AA medido por 2, 2-difenil-1-picrilidrazilo (DPPH), poder antioxidante redutor férrico (FRAP) e ácido beta-caroten ácido linoleico. Os resultados mostraram a extração de compostos fenólicos e os seus AA foram afetados por combinações de solventes. Além disso, houve uma boa correlação entre o conteúdo de TP e os extratos de AA de Stachys turcomanica. Finalmente, o metanol: água (80:20) foi bom solvente na extração de compostos fenólicos com AA mais alto.


Assuntos
Stachys , Biologia de Sistemas , Compostos Fenólicos , Radicais Livres , Antioxidantes , Solventes , Metanol
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...