Abdominal ultrasound in amazonian manatee (Trichechus inunguis) (Natterer, 1883) / Ultrassonografia abdominal em peixe boi amazônico (Trichechus inunguis (Natterer, 1883)

Morphophysiological species researches are fundamental, and diagnostic imaging is an excellent technique, already used in wild animals, with great application, not invasive and provide real-time information of each body. Amazonian manatees are on the list of endangered animals classified in the vulnerable category and knowledge of the normal pattern of ultrasound anatomy of organs and tissues is important for the maintenance and well-being of captive specimens contributing to reintroduction actions. The objective of the study was to standardize the examination technique and describe the ultrasound findings of the liver, gallbladder, stomach, urinary bladder and the subcutaneous tissue of the abdominal region in Trichechus inunguis, in order to contribute with the anatomical and sonographic knowledge and assist in the diagnosis and prognosis diseases. The study used 18 animals to describe the normal sonographic anatomy in the abdominal cavity of the Amazonian manatee. During abdominal scan, it was possible to visualize the features of the liver, gallbladder, stomach, urinary bladder obtained satisfactory results in this study. Therefore, other structures were not primarily identified by the reduced time, lots of fat and gases in intestines of animals.

Pesquisas morfofisiológicas em espécies selvagens são fundamentais, e o diagnóstico por imagem é uma excelente técnica, já usada e com grande aplicação, não invasiva e que fornece informações em tempo real de cada órgão. Peixes-boi-amazônico encontram-se na lista de animais ameaçados de extinção classificados na categoria vulnerável e o conhecimento do padrão normal da anatomia ultrassonográfica de órgãos e tecidos é importante para a manutenção e bem-estar de espécimes em cativeiro contribuindo para ações de reintrodução. O objetivo deste estudo foi padronizar a técnica de exame e descrever os achados ultrassonográficos do fígado, vesícula biliar, estômago, vesícula urinária e o tecido subcutâneo da região abdominal em Trichechus inunguis, de modo a contribuir com o conhecimento anátomo-sonográfico e auxiliar no diagnóstico e prognóstico de doenças. O estudo utilizou 18 animais para descrever a anatomia ultrassonográfica normal na cavidade abdominal de peixe-boi amazônico. Durante a varredura abdominal foi possível visualizar as características dos órgãos obtendo resultados satisfatórios neste estudo, concluindo ser uma técnica eficiente para avaliação de determinados órgãos abdominais em peixe-boi amazônico. Entretanto, outras estruturas não foram identificadas principalmente pelo tempo reduzido, muita gordura e gases nos intestinos dos animais.

Impresiones 3D de cortes transversales de un cuerpo humano: un recurso didáctico para el estudio de la anatomía seccional / 3D prints of cross sections of a human body: a teaching resource for the study of sectional anatomy

Los cursos de anatomía constituyen un componente esencial del currículo de medicina, aportando las bases morfológicas para el examen clínico, la interpretación de imágenes médicas y la práctica segura de intervenciones quirúrgicas y procedimientos. Recientemente, la tecnología de impresión 3D ha permitido generar réplicas de disecciones de segmentos corporales a escala real que se utilizan como recursos docentes para el estudio de la anatomía humana, generando así modelos docentes de alta verosimilitud que sirven como alternativa al uso de preparaciones cadavéricas para la docencia anatómica. En este trabajo presentamos los resultados obtenidos al utilizar nuestro kit KAN3D que incluye réplicas físicas de secciones transversales del tronco y de las extremidades y una plataforma que aloja los modelos digitales debidamente rotulados, producto financiado con el proyecto FONDEF IT16I10073. La aplicación de estos productos en docencia señalan que las réplicas de secciones transversales de segmentos corporales presentan una alta verosimilitud en términos de forma, color, topografía y texturas, características que las validan como un excelente recurso docente para la docencia y el aprendizaje de la anatomía seccional humana. El kit KAN3D pone a disposición de los estudiantes de las carreras de la salud recursos de alta verosimilitud, disponibles a libre demanda, que les permita reproducir la experiencia de la actividad práctica de Morfología en el momento y lugar en que ellos se encuentren dispuestos, superando así las limitaciones de acceso a los pabellones de Anatomía y a material cadavérico de calidad.

Anatomy courses constitute an essential component of the medical curriculum, providing the morphological basis for the clinical examination, the interpretation of medical images and the safe practice of surgical interventions and procedures. Recently, 3D printing technology has allowed to generate replicas of dissections of body segments on a real scale that are used as teaching resources for the study of human anatomy, thus generating high-likelihood teaching models that serve as an alternative to the use of cadaveric preparations for Anatomical teaching. In this paper we present the results obtained by using our KAN3D kit that includes physical replicas of cross sections of the trunk and extremities and a platform that houses properly labeled digital models, a product financed with the FONDEF IT16I10073 project. The application of these products in teaching indicate that replicas of cross sections of body segments have a high likelihood in terms of shape, color, topography and textures, characteristics that validate them as an excellent teaching resource for teaching and learning the human sectional anatomy. The KAN3D kit makes available to students of health careers a high-likelihood resources, accesible on demand, that allows them to reproduce the experience of the practical activity of Morphology at the time and place where they are willing, exceeding thus the limitations of access to the Anatomy pavilions and quality cadaveric material.

2D browsing software and 3D PDF of canine ear based on real color sectioned images / Software de navegación 2D y PDF en 3D del oído canino basado en imágenes seccionadas en color real

Dog ear is very important because of disease vulnerability. Therefore, gross anatomy and sectional anatomy on CT and MRI of the dog ear should be mastered by veterinarian. The purpose of this research was to present the digital atlases which high quality sectioned images and 3D models of detailed structures of dog ear could be displayed freely. In the sectioned images of a female beagle, ear structures were reconstructed by surface modeling to make 3D models. The sectioned images and 3D models were put into the browsing software and PDF file, respectively. Using the browsing software and the PDF file, gross and radiological anatomy of dog ear could be learned easily and accurately. The auditory tube of a dog was placed anterior to the tympanic cavity unlike human. The tensor tympani muscle of a dog was connected to the dorsal wall of the tympanic cavity with the malleus. No remarkable difference in the auditory ossicles, semicircular ducts, facial nerve, and endolymphatic duct was observed between dogs and humans. The software and the PDF file will be provided to other researchers freely to help contribute to veterinary research and education.

La oreja del perro es importante debido a la vulnerabilidad de enfermedad. Por lo tanto, el veterinario debe conocer plenamente la anatomía macroscópica y la anatomía seccional en la TC y la RM del oído del perro. El objetivo de esta investigación fue presentar los atlas digitales que podían mostrar imágenes seccionadas de alta calidad y modelos 3D de estructuras detalladas de orejas de perro. En las imágenes seccionadas de una hembra Beagle, las estructuras de las orejas se reconstruyeron mediante modelado de superficie con el objetivo de crear modelos 3D. Las imágenes seccionadas y los modelos 3D se colocaron en un software de navegación y un archivo PDF. El uso de software de navegación y el archivo PDF permiten un aprendizaje fácil y preciso de la anatomía macroscópica y radiológica de la oreja de perro. El músculo tensor del tímpano de un perro estaba conectado a la pared dorsal de la cavidad timpánica con el martillo. No se observaron diferencias notables en los huesecillos auditivos, los conductos semicirculares, el nervio facial y el conducto endolinfático entre perros y humanos. El software y el archivo PDF estarán disponibles libremente para los investigadores para ayudar en la investigación y educación veterinaria.

Variations in the Cross-Sectional Shape of the Apical Thirds of the Root Canals in Maxillary and Mandibular Teeth

Abstract Objective: To determine the prevalence of cross-sectional variations in the apical thirds of the root canals in maxillary and mandibular teeth. Material and Methods: Eighty tooth samples (maxillary second premolar, maxillary first molar, and mandibular first molar) were scanned using micro-computed tomography. The apical third area of each root canal was sectioned and the maximum and minimum diameters were calculated from the mesiodistal and buccolingual diameters. The shapes were categorized as a round, oval, long oval, and flat based on the ratios obtained. Results: The most common shape of the apical third of the root canals in the maxillary second premolars was oval (66.7%), followed by long oval (24.6%), flat (7%), and round (1.7%). The corresponding values in the mesiobuccal root of the maxillary first molars were oval (68.2%), long oval (22.7%), flat (9.1%), 94.1% of the distobuccal roots were oval, while the remaining were long oval (5.9%). All the palatal root canals were oval. In the mesiobuccal root of the mandibular first molars, 47.4% were long oval in shape, followed by 36.8% oval and 15.8% flat canals. All the mesiolingual root canals were oval, whereas, in the distal root, 68.4% were oval, 21.1% long oval, and 10.5% were flat. Conclusion: The oval shape was most commonly observed in the majority of the root canals. Knowledge about the apical anatomy of the root can help the operator improve the root canal treatment's success.

Diagnóstico prenatal ultrasonográfico de hemivértebra / Prenatal Ultrasonographic Diagnosis of Hemivertebrae

Introducción: La hemivértebra es un raro defecto congénito de la columna vertebral fetal en la que solo se desarrolla el cuerpo vertebral de un lado, lo cual provoca su deformidad. Objetivo: Presentar un caso con diagnóstico ecográfico tridimensional prenatal de hemivértebra, como único defecto. Método: Se realizó evaluación ecográfica prenatal y examen anátomo patológico y radiológico posmortem al feto con escoliosis congénita provocado por hemivértebra. Se revisó la literatura sobre este defecto congénito, su diagnóstico prenatal y otros aspectos genéticos que deben tenerse en cuenta para el asesoramiento a la familia. Presentación de caso: Gestante de 28 años remitida a la consulta provincial de Genética Médica en la ciudad de Camagüey, Cuba, el 25 de septiembre del 2018, por sospecha ultrasonográfica de hemivértebra fetal con 20 semanas de gestación. Se confirma diagnóstico a esta instancia, mediante ultrasonografía tridimensional. Con el consentimiento familiar informado se realiza interrupción de la gestación y se comprueba el diagnóstico prenatal realizado por estudios radiológicos y anátomo patológico de la región dorso lumbar. Conclusiones: Se concluye como un defecto congénito múltiple, aislado, de posible etiología multifactorial. Se destacó el valor de la ecografía tridimensional, vista sagital coronal, como método no invasivo más empleado para el diagnóstico prenatal(AU)

Introduction: The hemivertebrae is a rare congenital defect of the fetal spine in which only the vertebral body develops on one side, resulting in deformity. Objective: To present a case with three-dimensional prenatal ultrasound diagnosis of hemivertebrae, as the only defect. Method: Prenatal ultrasound evaluation, postmortem anatomopathological and radiological examination were performed in a fetus with congenital scoliosis caused by hemivertebrae. The literature on this congenital defect, the prenatal diagnosis and other genetic aspects that should be taken into account for family counseling was reviewed. Case report: A 28-year-old pregnant woman referred to the provincial office of Medical Genetics in Camagüey, Cuba, on September 25, 2018, due to ultrasonographic suspicion of fetal hemivertebrae. She was 20 weeks of gestation. Diagnosis is confirmed by three-dimensional ultrasonography. After the informed family consent, the pregnancy was interrupted. The prenatal diagnosis was verified by radiological and pathological studies of the lumbar back region. Conclusions: It is concluded as a multiple congenital defect, isolated, of possible multifactorial etiology. The value of three-dimensional ultrasound, coronal sagittal view, was highlighted as the most commonly used, non-invasive method for prenatal diagnosis(AU)

Variaciones anatómicas de la silla turca en radiografías laterales de cráneo. Hospital "Faustino Pérez", 2017-2018 / Anatomic variants of sella turcica in lateral crania radiographies. Hospital "Faustino Pérez¨, 2017-2018

RESUMEN Introducción: diversos autores reflejan que la morfología de la silla turca constituye un factor predisponente para algunas enfermedades. Por ejemplo, se considera que existe correlación entre la morfología de esta estructura anatómica y varias patologías; como el síndrome de la silla turca vacía, síndrome de Williams, paladar hendido, entre otras. Objetivo: describir las variaciones anatómicas de la silla turca que se observan en las radiografías laterales de cráneo del Hospital Universitario "Faustino Pérez" de la ciudad de Matanzas, en el período de enero del 2017 a enero del 2018. Materiales y métodos: el universo fue 140 radiografías laterales de cráneo, de estas 85 pertenecieron al sexo femenino y 55 al masculino. Las variables estudiadas fueron edad, sexo y variaciones anatómicas de la silla turca. Se emplearon métodos teóricos y empíricos. Resultados: se observó un predominio de la variación anatómica de la silla turca en forma de U, en ambos sexos. Seguido de la forma de J, predominando la variación en forma de U en el grupo etario de 41 a 50 años y la forma de J en los pacientes mayores de 60 años. Conclusiones: es imprescindible el conocimiento de la anatomía normal de la silla turca y de sus variaciones anatómicas, tanto para las especialidades quirúrgicas como para las no quirúrgicas. Un análisis exhaustivo de la morfología de esta estructura es necesario para establecer parámetros que excluyan determinadas patologías.

ABSTRACT Introduction: several authors declare that sella turcica morphology is a predisposing factor to several diseases. For example, it is considered that there is a correlation between the morphology of this anatomical structure and several pathologies like empty sella turcica syndrome, Williams syndrome, cleft palate and others. Objective: to describe the anatomical variants of sella turcica observed in side cranial radiographies of the University Hospital ¨Faustino Perez¨ of Matanzas, in the period January 2017-January 2018. Materials and methods: the universe was 140 side cranial radiography: 85 belonged to female patients and 55 to male patients. The studied variables were age, sex and sella turcica anatomical variables. Theoretic and empirical methods were used. Results: it was observed a predominance of the U-shaped sella turcica anatomical variant in both sexes, followed by the J-shaped one. The U-shaped form predominated in the 41-50-years-old age-group and the J-shaped form in patients elder than 60 years. Conclusions: it is essential to know sella turcica normal anatomy and its anatomical variables, both for the surgical specialties and for the non-surgical ones. It is necessary the exhaustive analysis of this structure to establish parameters excluding several pathologies.

Modelado vectorial tridimensional del corazón y los vasos coronarios a partir de cortes anatómicos del proyecto Korean Visible Human / Visible Human Project: a new computarized virtual dissection table as a learning tool for students and anatomy teachers

La disección virtual es una herramienta educativa sumamente valiosa en anatomía. Es particularmente útil cuando hay escasez de cadáveres o en los casos en que la disección no sea posible por motivos religiosos o éticos. En este trabajo los autores presentan una reconstrucción 3D de un corazón masculino a partir de la información del proyecto Korean Visible Human, realizado en el marco de asociaciones de la cátedra de anatomía digital de la UNESCO creada recientemente en la Universidad Descartes. La segmentación manual de 1640 cortes anatómicos se logró a través del software Winsurf, produciendo un modelo vectorial 3D interactivo del corazón y la anatomía que lo rodea. Se reconstruyeron ochenta y cuatro estructuras, incluyendo el corazón y sus vasos (27 estructuras), tráquea, esófago, pulmones, cayado aórtico, vena cava inferior, riñones, sistema esquelético conformado por 58 estructuras, entre ellas: esternón, cartílagos costales, vértebras torácicas y discos intervertebrales, sacro, coxales y piel. El modelo vectorial 3D obtenido se exportó en formato PDF 3D produciendo una verdadera herramienta de disección virtual a través de la interfaz de Acrobat: las estructuras anatómicas pueden individualizarse y manipularse interactivamente como 84 objetos 3D separados. Además, se pueden agregar "etiquetas" con el nombre de cada elemento anatómico. Esta nueva mesa de disección virtual computarizada es una herramienta simple y poderosa tanto para alumnos como para docentes de anatomía. Además, resulta ser la base para futuras herramientas de simulación que contribuirán al entrenamiento de cirujanos

The virtual dissection is a remarkable learning tool in anatomy. It is particularly useful in the case of lack of cadavers or if anatomical dissection is impossible due to ethical or religious reasons. The authors present here a 3D reconstruction of the female's heart from the Visible Korean human data, made in the frame of the projects of the UNESCO chair of digital anatomy created recently at the Descartes University.The manual segmentation of 1640 anatomical slices was achieved with the Winsurf ® software producing an interactive 3D vectorial model of the heart and surrounding anatomy. Eighty four anatomical structures were reconstructed, including the heart and its vessels (27 structures), trachea, oesophagus, lungs, aortic arch, superior vena cava, azygos system, inferior vena cava, right and left kidneys, skeletal system (58) structures including: sternum, xiphoid process, clavicles, ribs, costal cartilage, thoracic vertebrae, intervertebrales discs, sacrum, hip bones, and femurs) and skin. The obtained 3D vectorial model was exported in 3D PDF format, producing a true virtual dissection tool through the Acrobat's interface: the anatomical structures can be individually and interactively manipulated as 84 separated 3D objects. 3D labels can be added with the name of each anatomical element. This new computerized virtual dissection table is a simple and powerful learning tool for students and anatomy teachers. It is also the basis of future simulation tools for surgeon's training

Automatic 3D modeling of liver segments including segmental branches of portal triad and hepatic vein based on the sectioned-images / Modelado 3D automático de segmentos hepáticos, con las ramas segmentarias de la tríada portal y la vena hepática basadas en las imágenes seccionadas

SUMMARY: The liver dimensional (3D) models, consists of eight segments including portal triad (portal vein, hepatic artery, and bile duct), are necessary because it is difficult to dissect a liver and its inner structures. But it is difficult to produce 3D models from high resolution and color sectioned-images. This study presents automatic and accurate methods for producing liver 3D models from the sectionedimages. Based on the sectioned-images and color-filled-images of the liver, a 3D model including both the portal triad and hepatic vein was made. Referring to the 3D model, 3D models of liver's eight segments including the segmental branches of the portal triad and hepatic vein were completed and saved as STL format. All STL files were combined and saved as Liver-3D in PDF format for the common user. By functional subdivision of liver, the Liver-3D was divided into left (segments II, III, and, IV) and right (segments V, VI, VII, and VIII) liver in bookmark window of the PDF file. In addition, in Liver-3D, the primary to tertiary segmental branches of the portal triad could be shown in different colors. Owing to the difficulty of 3D modeling of liver including eight segments and segmental branches of the portal triad and hepatic, we started this research to find automatic methods for producing 3D models. The methods for producing liver 3D models will assist in 2D selection and 3D modeling of other complicated structures.

RESUMEN: Los modelos hepáticos dimensionales (3D) consisten en ocho segmentos que incluyen la tríada portal (vena porta, arteria hepática y conducto biliar), y son necesarios ya que es difícil disecar un hígado y sus estructuras internas. Sin embargo, es difícil producir modelos 3D a partir de imágenes en alta resolución e imágenes seccionadas en color. Este estudio presenta métodos automáticos y precisos para producir modelos 3D de hígado a partir de las imágenes seccionadas. Sobre la base de las imágenes seccionadas y las imágenes del hígado llenas de color, se realizó un modelo 3D que incluía tanto la tríada portal como la vena hepática. En referencia al modelo 3D, se completaron modelos 3D de los ocho segmentos del hígado que incluían las ramas segmentarias de la tríada portal y la vena hepática y se guardaron como formato STL. Todos los archivos STL fueron combinados y guardados como Liver-3D en formato PDF para el usuario común. Por subdivisión funcional del hígado, el hígado-3D se dividió en hígado izquierdo (segmentos II, III y IV) y derecho (segmentos V, VI, VII y VIII) en la ventana de marcador del archivo PDF. Además, en Liver-3D, las ramas segmentarias primarias a terciarias de la tríada portal podrían mostrarse en diferentes colores. Debido a la dificultad del modelado 3D del hígado, incluidos ocho segmentos y ramas segmentarias de la tríada portal y hepática, comenzamos esta investigación para encontrar métodos automáticos para producir modelos 3D. Los métodos para producir modelos 3D de hígado ayudarán en la selección 2D y el modelado 3D de otras estructuras complicadas.

Sectioned images of a cat head to contribute to learning of its sectional anatomy / Imágenes seccionadas de una cabeza de gato para contribuir al conocimiento de su anatomía seccional

The sectional anatomy of a cat head is essential when interpreting CTs and MRIs of the region. In learning the sectional anatomy, sectioned images of a cat could be quite effective data. The main objective was to assist veterinary physicians who learn the sectional anatomy of a cat head by presenting high-quality sectioned images. A short-haired female cat was frozen and sectioned frontally using a cryomacrotome. Every sectioned surface in real body color was photographed with a digital camera. The frontal planes were stacked to produce dorsal and sagittal planes. High-quality sectioned images of a cat head allowed the identification of small, complicated structures. The notable structures were as follows: each bone of the cranium, structures of the brain, tympanic cavity (larger than human), oval window (larger than human), vestibular nerve, cochlear nerve, ear ossicles, six extraocular muscles, pupil (larger than human), retractor bulbi muscle (not found in human), optic nerve, olfactory bulb (considerably large), vomeronasal organ duct (not found in human), infraorbital gland (not found in human), masticatory muscles (larger than human), maxillary nerve (larger than human), and mandibular nerve. This pacesetting report describes the detailed head structures of a cat from the viewpoint of sectional anatomy. The sectioned images will be given to other interested researchers free of charge.

El conocimiento de la anatomía seccional de cabeza de gato es esencial para interpretar estudios por tomografía computada y resonancia magnética de la región. En el conocimiento de esta anatomía seccional, las imágenes seccionadas de un gato podrían aportar datos bastante efectivos. El objetivo principal consistió en ayudar a los médicos veterinarios para que aprendan la anatomía seccional de una cabeza de gato mediante la presentación de imágenes seccionadas de alta calidad. Una gata de pelo corto fue congelada y seccionada frontalmente usando un criomicrótomo. Cada sección, con el color real del cuerpo, fue fotografiada con una cámara digital. Los planos frontales se apilaron para producir planos dorsales y sagitales. Las imágenes seccionadas de alta calidad de una cabeza de gato permitieron la identificación de estructuras pequeñas y de dificil visualización. Las estructuras destacadas fueron las siguientes: cada hueso del cráneo, las estructuras del cerebro, la cavidad timpánica (más grande que en el humano), la ventana oval (más grande que en el humano), el nervio vestibular, el nervio coclear, los huesecillos del oído, seis músculos extraoculares, la pupila, el músculo retractor del ojo (no se encuentra en el ser humano), nervio óptico, bulbo olfatorio (considerablemente grande), conducto del órgano vomeronasal (no se encuentra en el ser humano), glándula infraorbitaria (no se encuentra en los humanos), músculos masticatorios (más grandes que en el humano), nervio maxilar (más grande que en el humano) y nervio mandibular. En este trabajo describimos detalladamente, desde el punto de vista de la anatomía seccional, las estructuras de la cabeza de un gato. Las imágenes seccionadas estarán a disponibles para otros investigadores en forma gratuita.

Volumetric reconstruction and determination of minimum crosssectional area of the pharynx in patients with cleft lip and palate: comparison between two different softwares

Abstract Objective: The aim of this study was to assess the accuracy of volumetric reconstruction of the pharynx by comparing the volume and minimum crosssectional area (mCSA) determined with open-source applications (ITK-Snap, www.itksnap.org ; SlicerCMF) and commercial software (Dolphin3D, 11.8, Dolphin Imaging & Management Solutions, Chatsworth, CA, USA) previously validated in the literature. Material and Methods: The sample comprised of 35 cone-beam computed tomography (CBCT) scans of patients with unilateral cleft lip and palate, with mean age of 29±15. Three-dimensional volumetric models of the pharynx were reconstructed using semi-automatic segmentation using the applications ITK-Snap (G1) and Dolphin3D (G2). Volumes and minimum cross-sectional areas were determined. Inter- and intra-observer error were calculated using ICC test. Comparison between applications was calculated using the Wilcoxon test. Results: Volumes and minimum crosssectional area were statistically similar between applications. ITK-Snap showed higher pharynx volumes, but lower mCSA. Visual assessment showed that 62.86% matched the region of mCSA in Dolphin3D and SPHARM-PDM. Conclusion: Measurements of volume and mCSA are statistically similar between applications. Therefore, open-source applications may be a viable option to assess upper airway dimensions using CBCT exams.

Browsing software of the head sectioned images for the android mobile device / Software de navegación para el dispositivo móvil android de imágenes seccionadas de cabeza

SUMMARY: The purpose of this research was to enable anyone to learn the sectional anatomy of the head anywhere, anytime by presenting software to browse sectioned images on a Google Android mobile device. Among the 2,343 sectioned images at 0.1 mm intervals, 234 sectioned images at 1 mm intervals were chosen. The corresponding 234 segmented images containing 236 head structures were selected. The software of the mobile version was programmed and debugged in the Java programming language. The folders of the sectioned images and segmented images and the txt file of the segmentation data were arranged in the source code of the software. The software was distributed free of charge at the homepage (neuroanatomy.kr) and Google Play Store. After installing the software, the sectioned images and corresponding segmented images could be browsed by touching and swiping the screen. In the medical category of the Google Play Store, the software earned a good reputation. The software of the Android mobile version was usable regardless of the time and place. The software is under the authors' non-commercial policy. Other investigators may modify the mobile software to browse their own images. The mobile version of the software will aid medical students and doctors in learning sectional anatomy.

RESUMEN: El propósito de esta investigación fue permitir que toda persona aprendiera la anatomía de secciones de la cabeza, en cualquier lugar y en cualquier momento, a través de un software para examinar imágenes seccionadas en un dispositivo móvil Android de Google. De las 2.343 imágenes seccionadas a intervalos de 0,1 mm, se seleccionaron 234 imágenes seccionadas a intervalos de 1 mm. Se seleccionaron las 234 imágenes segmentadas que contenían 236 estructuras de cabeza. El software de la versión móvil fue programado y depurado en el lenguaje de programación Java. Las carpetas de las imágenes seccionadas y las imágenes segmentadas y el archivo .txt de los datos de segmentación se organizaron en el código fuente del software. El software se distribuyó gratuitamente en la página principal (neuroanatomy.kr) y Google Play Store. Después de instalar el software, las imágenes seccionadas y las imágenes segmentadas correspondientes se pueden navegar tocando y deslizando la pantalla. En la categoría médica de Google Play Store, el software obtuvo buena recepción. El software de la versión móvil de Android fue utilizado independientemente de la hora y el lugar. El software está bajo la política no comercial de los autores. Otros investigadores pueden modificar el software móvil para navegar por sus propias imágenes. La versión móvil del software ayudará a los estudiantes de medicina y los médicos en el aprendizaje de la anatomía seccional.

Electrical stimulation attenuates morphological alterations and prevents atrophy of the denervated cranial tibial muscle / Eletroestimulação atenua alterações morfológicas e previne atrofia do músculo tibial cranial desnervado

ABSTRACT Objective To investigate if electrical stimulation through Russian current is able to maintain morphology of the cranial tibial muscle of experimentally denervated rats. Methods Thirty-six Wistar rats were divided into four groups: the Initial Control Group, Final Control Group, Experimental Denervated and Treated Group, Experimental Denervated Group. The electrostimulation was performed with a protocol of Russian current applied three times per week, for 45 days. At the end, the animals were euthanized and histological and morphometric analyses were performed. Data were submitted to statistical analysis with a significance level of p<0.05. Results The Experimental Denervated Group and the Experimental Denervated and Treated Group had cross-sectional area of smaller fiber compared to the Final Control Group. However, there was significant difference between the Experimental Denervated Group and Experimental Denervated and Treated Group, showing that electrical stimulation minimized muscle atrophy. The Experimental Denervated and Treated Group and Initial Control Group showed similar results. Conclusion Electrical stimulation through Russian current acted favorably in maintaining morphology of the cranial tibial muscle that was experimentally denervated, minimizing muscle atrophy.

RESUMO Objetivo Investigar se a estimulação elétrica pela corrente russa é capaz de manter a morfologia do músculo tibial cranial de ratos desnervados experimentalmente. Métodos Foram utilizados 36 ratos Wistar, distribuídos em quatro grupos: Grupo Controle Inicial, Grupo Controle Final, Grupo Experimental Desnervado Tratado, Grupo Experimental Desnervado. A eletroestimulação foi realizada com um protocolo de corrente russa aplicada três vezes por semanas, durante 45 dias. Ao final, os animais foram eutanasiados e, em seguida, foram realizadas as análises histológica e morfométrica. Os dados foram submetidos à análise estatística, com nível de significância de p<0,05. Resultados Os Grupos Experimental Desnervado e o Grupo Experimental Desnervado Tratado apresentaram área de secção transversal da fibra menor quando comparados ao Grupo Controle Final. Entretanto, constatou-se diferença significativa entre o Grupo Experimental Desnervado e o Grupo Experimental Desnervado Tratado, mostrando que a estimulação elétrica minimizou atrofia muscular. Ainda, observou-se que o Grupo Experimental Desnervado Tratado apresentou resultados semelhantes ao Grupo Controle Inicial. Conclusão A estimulação elétrica por meio da corrente russa foi favorável na manutenção da morfologia do músculo tibial cranial desnervado experimentalmente, minimizando a atrofia muscular.

Opções de tratamento para a discrepância transversal da maxila no adulto / Treatment options for transverse maxillary discrepancy in the adult

Na Ortodontia atual tem-se criado diferentes opções de tratamento devido à rápida evolução de tecnologia e ferramentas de diagnóstico. Esse fato tem aumentado a abrangência de pacientes beneficiados. O tratamento ortodôntico em adultos deve ser implementado com a preocupação de oferecer maior conforto e estética. A deficiência transversal da maxila pode ser corrigida de diferentes formas com uma diversidade de aparelhos. A expansão maxilar deve ser realizada na quantidade devida para a correção e estabilidade da atresia maxilar. Sendo assim, este artigo tem o objetivo de auxiliar no diagnóstico da discrepância transversal da maxila e descrever alternativas para a expansão maxilar em pacientes adultos.(AU)

The current Orthodontics has been creating different treatment options due to the rapid evolution of technology and diagnostic tools. This fact has improved the coverage of patients benefited. Orthodontic treatment in adults should be implemented with the concern of offering greater comfort and aesthetics. Transverse maxillary deficiency can be treated with different approaches using a variety of devices. Maxillary expansion should be performed according to the necessary amount to reach correction and stability of maxillary transversal dimension. Therefore, this article aims to aid in the diagnosis of transversal maxillary discrepancy and to describe alternatives for maxillary expansion in adult patients.(AU)

AmF/NaF/SnCl2 solution reduces in situ enamel erosion - profilometry and cross-sectional nanoindentation analysis

Abstract This in situ study aimed to investigate the effect of a tin-containing fluoride solution in preventing enamel erosion. Also, its effects on the partly demineralized zone were assessed for the first time. Thirteen volunteers participated in this 2-phase study, wearing removable intra-oral appliances containing four sterilized bovine enamel slabs, for 8 days, where 2 treatment protocols were tested using samples in replicas (n = 13): CO - no treatment (negative control) and FL - AmF/NaF/SnCl2 solution (500 ppm F-, 800 ppm Sn2+, pH = 4.5). Samples were daily exposed to an erosive challenge (0.65% citric acid, pH 3.6, 4 min, 2x/day). In the 2nd phase, volunteers switched to the other treatment protocol. Samples were evaluated for surface loss using a profilometer (n = 13) and a cross-sectional nanohardness (CSNH) test (n = 13) was carried out in order to determine how deep the partly demineralized zone reaches below the erosive lesion. The data were statistically analyzed by two-way ANOVA. Erosive challenges lead to smaller enamel surface loss (p < 0.001) in the FL group when compared to group CO. Data from CSNH showed that there was no significant difference in demineralized enamel zone underneath erosion lesions between the groups. An amorphous layer could be observed on the surface of enamel treated with tin-containing solution alone. Under the experimental conditions of this in situ study, it can be concluded that AmF/NaF/SnCl2 solution prevents enamel surface loss but does not change the hardness of the partly demineralized zone near-surface enamel.

Brain neuroimaging of domestic cats: correlation between computed tomography and cross-sectional anatomy / Neuroimagem cerebral de gatos domésticos: correlação entre a tomografia computadorizada e a anatomia seccional

Computed tomography of the brain is necessary as part of the diagnosis of lesions of the central nervous system. In this study we used six domestic cats, male or female, aged between one and five years, evaluated by Computed Tomography (CT) examination without clinical signs of central nervous system disorders. Two euthanized animals stating a condition unrelated to the nervous system were incorporated into this study. The proposal consisted in establishing detailed anatomical description of tomographic images of normal brain of cats, using as reference anatomical images of cross sections of the stained brain and cranial part, with thicknesses similar to the planes of the CT images. CT examinations were performed with and without intravenous iodinated contrast media for live animals. With one euthanized animal, the brain was removed and immediately preserved in 10% formalin for later achievement in cross-sectional thickness of approximately 4mm and staining technique of Barnard, and Robert Brown. The head of another animal was disarticulated in the Atlanto-occipital region and frozen at -20ºC then sliced to a thickness of about 5mm. The description of visualized anatomical structures using tomography is useful as a guide and allows transcribing with relative accuracy the brain region affected by an injury, and thus correlating it with the clinical symptoms of the patient, providing additional information and consequent improvement to veterinarians during the course of surgical clinic in this species.(AU)

A tomografia computadorizada do cérebro é de suma importância como parte do diagnóstico de lesões do sistema nervoso central. Neste estudo, foram utilizados seis felinos domésticos, machos ou fêmeas, com idade entre um e cinco anos, avaliados pela tomografia computadorizada (TC), sem sinais clínicos de distúrbios do sistema nervoso central. Dois cadáveres indicando a condição relacionada com o sistema nervoso foram incorporados ao presente estudo. A proposta consistiu na criação da descrição anatômica detalhada das imagens tomográficas de cérebro normal de gatos, usando como referência a imagens anatômicas de secções transversais do cérebro coradas, realizadas com espessuras similares aos planos das imagens tomográficas. Exames de TC foram realizados com e sem contraste iodado intravenoso para os animais vivos. Em um dos cadáveres, o cérebro foi removido e imediatamente preservado em formalina a 10% para a realização posterior da técnica de coloração de Barnard e Robert Brown, além de cortes transversais com espessura de, aproximadamente, 4mm. O crânio do outro cadáver foi desarticulado na região atlanto-occipital e congelado a -20ºC. Em seguida, foi realizado corte com espessura de cerca de 5mm. A descrição das estruturas anatômicas visualizadas foi útil e serve como guia, permitindo descrever com relativa precisão a estrutura cerebral normal ou lesionada, e, portanto, correlacionando-a com os sintomas clínicos de um paciente, o que fornece informações adicionais e consequente aprimoramento de veterinários no curso de clínica cirúrgica para essa espécie.(AU)

Prevalence and morphometric analysis of three-rooted mandibular first molars in a Brazilian subpopulation

ABSTRACT The knowledge of the internal anatomy of three-rooted mandibular molars may help clinicians to diagnose and plan the root canal treatment in order to provide adequate therapy when this variation is present. Objectives: To determine the prevalence of three-rooted mandibular molars in a Brazilian population using cone beam computed tomography (CBCT) and to analyze the anatomy of mandibular first molars with three roots through micro-CT. Material and Methods: CBCT images of 116 patients were reviewed to determine the prevalence of three-rooted first mandibular molars in a Brazilian subpopulation. Furthermore, with the use of micro-CT, 55 extracted three-rooted mandibular first molars were scanned and reconstructed to assess root length, distance between canal orifices, apical diameter, Vertucci's classification, presence of apical delta, number of foramina and furcations, lateral and accessory canals. The distance between the orifice on the pulp chamber floor and the beginning of the curvature and the angle of canal curvature were analyzed in the distolingual root. Data were compared using the Kruskal-Wallis test (α=0.05). Results: The prevalence of three-rooted mandibular first molars was of 2.58%. Mesial roots showed complex distribution of the root canal system in comparison to the distal roots. The median of major diameters of mesiobuccal, mesiolingual and single mesial canals were: 0.34, 0.41 and 0.60 mm, respectively. The higher values of major diameters were found in the distobuccal canals (0.56 mm) and the lower diameters in the distolingual canals (0.29 mm). The lowest orifice distance was found between the mesial canals (MB-ML) and the highest distance between the distal root canals (DB-DL). Almost all distal roots had one root canal and one apical foramen with few accessory canals. Conclusions: Distolingual root generally has short length, severe curvature and a single root canal with low apical diameter.

Micromorfología de los foliolos de pejibaye Bactris gasipaes (Arecaceae) var. Diamantes-10 / Micromorphology of pejibaye leaflets Bactris gasipaes (Arecaceae) var. diamonds-10

ResumenBactris gasipaes se cultiva ampliamente para el aprovechamiento del palmito y el consumo de los frutos En este trabajo se realizó una descripción de las características micro morfológicas de los foliolos de plantas adultas de la variedad sin espinas Diamantes-10 de B. gasipaes, recolectadas en la Estación Experimental Diamantes en Guápiles, Costa Rica. Se utilizó microscopía de luz, electrónica de barrido y de transmisión. Para el estudio se recolectaron 25 foliolos y se evidenció abundante cera epicuticular en la superficie adaxial y abaxial. La epidermis está compuesta de células isodiamétricas y las células de la hipodermis tienen forma rectangular y son de mayor tamaño que las de la epidermis, también se observaron células buliformes. Los foliolos son anfiestomáticos en las áreas intercostales y alternan con bandas de células epidérmicas. El mayor número de estomas se encuentra en la superficie abaxial. Estos foliolos presentan tres tipos de tricomas. El parénquima presenta varios estratos no muy bien definidos con presencia de astroesclereidas. También se observan haces de fibras entre el parénquima que forman grupos de células muy compactas. La vena central presenta varios haces vasculares, algunos dispuestos de forma continua y todos ellos se encuentran rodeados de una vaina de tejido esclerotizado, algunas de estas fibras presentaron protoplastos vivos. Todas las venas menores presentan la misma anatomía de los haces vasculares de la vena central. Los vasos del protoxilema y metaxilema tienen paredes laterales con ornamentaciones escalariformes. El floema se ubica hacia la superficie adaxial de la vena y en el corte se observaron las células cribosas y células compañeras rodeadas de células de parénquima y fibras. Las células compañeras presentaron plasmodesmatas ramificados unidos a un elemento criboso y en ellos se evidenció cuerpos de proteína, llamada proteína-P. La diferencia principal en la anatomía de los foliolos de la var. Diamantes-10 radica en la ausencia de espinas, pero en el resto de la morfología no parece presentar cambios morfológicos con el resto de las variedades de B. gasipaes K.

Abstract:Bactris gasipaes is widely cultivated for the consumption of palm hearts and fruits. The present work describes the micro morphological characteristics of leaflets from adult plants of B. gasipaes, thornless variety Diamantes-10, collected in the Diamantes Experimental Station in Guápiles, Costa Rica. We collected 25 leaflets and analyses were performed with a combination of microscopy techniques: light microscopy, scanning electron microscopy and transmission electron microscopy to study their structure. Our results showed that leaflets have abundant epicuticular wax on adaxial and abaxial surfaces. Analyses from the epidermis indicated that it is composed of isodiametric cells, and it is also evident that hypodermis cells have rectangular shape and are larger than the other epidermal cells. We observed stomata on both surfaces, but they were more abundant in the abaxial surface. On the other hand, the epidermis showed the presence of trichomes with three different morphologies. In the parenchyma, cells are large and not well defined, and we observed the presence of astroesclereids, and compact groups of fiber bundles between parenchyma cells. The central vein has several vascular bundles, arranged in a continuous manner, and they are surrounded by sclerotic tissue; some of these fibers presented live protoplasts. All minor veins showed the same anatomy as the central vein. In these veins, the vessel elements of protoxylem and metaxylem showed scalariform ornaments on their walls. Phloem is located towards the adaxial surface of the vein and we observed sieve and companion cells surrounded by fibers and parenchyma cells. The companion cells presented branched plasmodesmata attached to a sieve element, and in these elements we found protein bodies called P-protein. The main anatomical difference in the leaflets of the var. Diamantes-10, compared to the other varieties of B. gasipaes K, is the lack of thorns; the other morphological features seem to be conserved. Rev. Biol. Trop. 64 (3): 1273-1285. Epub 2016 September 01.

Effect of macular hole volume on postoperative central macular thickness / O efeito do volume de buraco macular da espessura macular central pós-operatória

ABSTRACT Purpose: To evaluate the association between macular hole volume (MHV) and postoperative central macular thickness (CMT) using spectral-domain optical coherence tomography (SD-OCT). Methods: Thirty-three eyes of 30 patients with a large full-thickness idiopathic macular hole with or without vitreomacular traction who underwent surgical intervention were included in this cross-sectional study. Complete ophthalmological examination, including SD-OCT, was performed for all participants during the pre- and postoperative visits. MHV was preoperatively measured using SD-OCT, which captured the widest cross-sectional image of the hole. For normal distribution analysis of the data, the Kolmogorov-Smirnov test was performed, and for statistical analyses, chi-square, Student's t-test, Mann-Whitney U test, and Pearson's correlation coefficient test were performed. Results: Mean preoperative best-corrected visual acuity (BCVA) and MHV were found to be 0.99 ± 0.36 (range, 0.3-2.0) logMAR and 0.139 ± 0.076 (range, 0.004-0.318) mm3, respectively. Mean follow-up was 16.3 ± 14.3 (range, 3-50) months. No statistical correlations were found between MHV and postoperative BCVA (p=0.588) and between MHV and disease recurrence (p=0.544). A weak negative correlation existed between MHV and final CMT scores (p=0.04, r=-0.383). Conclusions: Greater MHV was found to be weakly associated with lower postoperative CMT scores.

RESUMO Objetivo: Avaliar a relação entre o volume do buraco macular (MHV) e a espessura macular central pós-operatória (CMT) por meio da tomografia de coerência óptica de domínio espectral (SD-OCT). Método: Trinta e três olhos de 30 pacientes com buracos maculares idiopáticos de espessura total grandes, com ou sem tração vitreorretiniana, que foram submetidos a intervenção cirúrgica foram incluídos neste estudo transversal. O exame oftalmológico completo, incluindo SD-OCT foi realizado nas visitas pré e pós-operatórias de todos os participantes. MHV foi medido a partir da imagem de SD-OCT pré-operatória que capturou a imagem mais larga da secção transversal do buraco. Após a análise distribuição nomral da população do estudo ter sido realizada com o teste Kolmogorov-Smirnov, os testes de qui-quadrado, t de Student, Mann-Whitney U e teste de correlação de Pearson foram utilizados para as estatísticas. Resultados: As médias pré-operatórias da melhor acuidade visual corrigida (BCVA) e MHV foram 0,99 ± 0,36 logMAR (variação de 0,3-2,0) e 0,139 ± 0,076 mm3 (variação de 0,004-0,318). O seguimento médio foi de 16,3 ± 14,3 meses (variação de 3-50). Não foram encontradas correlações estatísticas entre MHV e BCVA pós-operatória (p=0,588), bem como MHV e recorrência da doença (p=0,544). Uma fraca correlação negativa estava presente entre MHV e pontuações finais CMT (p=0,04, r=-0,383). Conclusões: Maior MHV foi fracamente relacionado com CMT mais baixo, no pós-operatório.

Morphometric analysis of feedforward pathways from the primary somatosensory area (S1) of rats

We used biotinylated dextran amine (BDA) to anterogradely label individual axons projecting from primary somatosensory cortex (S1) to four different cortical areas in rats. A major goal was to determine whether axon terminals in these target areas shared morphometric similarities based on the shape of individual terminal arbors and the density of two bouton types: en passant (Bp) and terminaux (Bt). Evidence from tridimensional reconstructions of isolated axon terminal fragments (n=111) did support a degree of morphological heterogeneity establishing two broad groups of axon terminals. Morphological parameters associated with the complexity of terminal arbors and the proportion of beaded Bp vs stalked Bt were found to differ significantly in these two groups following a discriminant function statistical analysis across axon fragments. Interestingly, both groups occurred in all four target areas, possibly consistent with a commonality of presynaptic processing of tactile information. These findings lay the ground for additional work aiming to investigate synaptic function at the single bouton level and see how this might be associated with emerging properties in postsynaptic targets.