Three-dimensional finite element analysis on stress distribution after different palatoplasty and levator veli palatini muscle reconstruction.

OBJECTIVES: To establish a three-dimensional finite element model of the upper palate, pharyngeal cavity, and levator veli palatini muscle in patients with unilateral complete cleft palate, simulate two surgical procedures that the two-flap method and Furlow reverse double Z method, observe the stress distribution of the upper palate soft tissue and changes in pharyngeal cavity area after different surgical methods, and verify the accuracy of the model by reconstructing and measuring the levator veli palatini muscle. MATERIALS AND METHODS: Mimics, Geomagic, Ansys, and Hypermesh were applied to establish three-dimensional finite element models of the pharyngeal cavity, upper palate, and levator veli palatini muscle in patients with unilateral complete cleft palate. The parameters including length, angle, and cross-sectional area of the levator veli palatini muscle etc. were measured in Mimics, and two surgical procedures that two-flap method and Furlow reverse double Z method were simulated in Ansys, and the area of pharyngeal cavity was measured by hypermesh. RESULTS: A three-dimensional finite element model of the upper palate, pharyngeal cavity, and bilateral levator veli palatini muscle was established in patients with unilateral complete cleft palate ; The concept of horizontal projection characteristics of the palatal dome was applied to the finite element simulation of cleft palate surgery, vividly simulating the displacement and elastic stretching of the two flap method and Furlow reverse double Z method during the surgical process; The areas with the highest stress in the two-flap method and Furlow reverse double Z method both occur in the hard soft palate junction area; In resting state, as measured, the two flap method can narrow the pharyngeal cavity area by 50.9%, while the Furlow reverse double Z method can narrow the pharyngeal cavity area by 65.4%; The measurement results of the levator veli palatini muscle showed no significant difference compared to previous studies, confirming the accuracy of the model. CONCLUSIONS: The finite element method was used to establish a model to simulate the surgical procedure, which is effective and reliable. The area with the highest postoperative stress for both methods is the hard soft palate junction area, and the stress of the Furlow reverse double Z method is lower than that of the two-flap method. The anatomical conditions of pharyngeal cavity of Furlow reverse double Z method are better than that of two-flap method in the resting state. CLINICAL RELEVANCE: This article uses three-dimensional finite element method to simulate the commonly used two-flap method and Furlow reverse double Z method in clinical cleft palate surgery, and analyzes the stress distribution characteristics and changes in pharyngeal cavity area of the two surgical methods, in order to provide a theoretical basis for the surgeon to choose the surgical method and reduce the occurrence of complications.

Two-stage palatal repair in non-syndromic CLP patients using anterior to posterior closure is associated with minimal need for secondary palatal surgery.

OBJECTIVE: The aim of the present study was to assess the need for secondary palatal corrective surgery in a concept of palate repair that uses a protocol of anterior to posterior closure of primary palate, hard palate and soft palate. METHODS: A data base of patients primarily operated between 2001 and 2021 at the Craniofacial and Cleft Care Center of the University Goettingen was evaluated. Cleft lips had been repaired using Tennison Randall and Veau-Cronin procedures in conjunction with alveolar cleft repair. Cleft palate repair in CLP patients was accomplished in two steps with repair of primary palate and hard palate first using vomer flaps at the age of 10-12 months and subsequent soft palate closure using Veau/two-flap procedures 3 months later. Isolated cleft palate repair was performed in a one-stage operation using Veau/two-flap procedures. Data on age, sex, type of cleft, date and type of surgery, occurrence and location of oronasal fistulae, date and type of secondary surgery performed for correction of oronasal fistula (ONF)and / or Velophyaryngeal Insufficiency (VPI) were extracted. The rate of skeletal corrective surgery was registered as a proxy for surgery induced facial growth disturbance. RESULTS: In the 195 patients with non-syndromic complete CLP evaluated, a total number of 446 operations had been performed for repair of alveolar cleft and cleft palate repair (Veau I through IV). In 1 patient (0,5%), an ONF occurred requiring secondary repair. Moreover, secondary surgery for correction of VPI was required in 1 patient (0,5%) resulting in an overall rate of 1% of secondary palatal surgery. Skeletal corrective surgery was indicated in 6 patients (19,3%) with complete CLP in the age group of 15 - 22 years (n = 31). CONCLUSIONS: The presented data have shown that two-step sequential cleft palate closure of primary palate and hard palate first followed by soft palate closure has been associated with minimal rate of secondary corrective surgery for ONF and VPI at a relatively low need for surgical skeletal correction.

Reliability and safety of miniscrew insertion planning with the use of lateral cephalograms assessed on corresponding cone-beam computer tomography images.

BACKGROUND/OBJECTIVES: Recently, lateral cephalograms have been proposed for guided miniscrew insertion planning. Therefore, the aim was to assess the reliability and safety of such planning on corresponding cone-beam computer tomography (CBCT) images. MATERIALS/METHODS: Intraoral scans, lateral cephalograms, and CBCT images of 52 subjects (even sexes distribution), aged 15.1 ±â€…2.5 years, were included. Miniscrew (n = 104) insertion planning was performed using lateral cephalograms superimposed on the maxillary intraoral scans, while the assessment of their bicortical placement, length in bone, contact with adjacent teeth, incisive canal, and nasal floor perforation was done on corresponding superimposed CBCT images. Moreover, maxillary incisor inclination, crowding, and the maxillary intercanine width were measured. RESULTS: The overall miniscrew length in bone was 7.2 ±â€…1.3mm. Bicortical placement was seen in 58.7% of the sample (38.5% of subjects). Incisive canal and nasal floor perforation was seen in 25% and 21.2% of subjects, respectively. No contact of the miniscrew with adjacent teeth was recorded. A negative significant interaction was seen between the miniscrew length in bone, the percentage of total miniscrew length and maxillary anterior teeth crowding (ß, -0.10, P = .047 and ß, -0.90, P = .006, respectively). Moreover, a positive significant interaction was seen between the incisive canal perforation and maxillary anterior teeth crowding (OR = 1.32, P = .021). LIMITATIONS: Exclusion of subjects with impacted teeth. CONCLUSIONS: Miniscrew insertion planning using lateral cephalograms, despite being safe in preventing contact with adjacent teeth, is limited in achieving bicortical placement and insufficient in completely avoiding incisive canal and nasal floor perforation.

Medication-related osteonecrosis in torus palatinus: Report of a case and literature review.

BACKGROUND: Medication-related osteonecrosis of the jaw bones have been frequently reported. However, its occurrence in torus palatinus is very rare with only 10 cases published in the English-language literature. CASE REPORT: We describe an additional case in a 79-year-old woman, who was referred for evaluation of a painful swelling with areas of suppuration on the hard palate. CONCLUSION: Conservative treatment was performed and after spontaneous sequestrectomy, total healing was achieved.

Periplaneta americana extract promotes hard palate mucosal wound healing via the PI3K/AKT signaling pathway in male mice.

OBJECTIVES: This study aimed to investigate the effect of Periplaneta americana extract, a traditional Chinese medicine, on hard palate mucosal wound healing and explore the underlying mechanisms. DESIGN: Hard palate mucosal wound model was established and the effects of Periplaneta americana extract on hard palate mucosal wound healing were investigated by stereomicroscopy observation and histological evaluation in vivo. Human oral keratinocytes and human gingival fibroblasts, which play key roles in hard palate mucosal wound healing, were selected as the main research cells in vitro. The effects of Periplaneta americana extract on cell proliferation, migration, and collagen formation were determined by cell counting kit-8 (CCK-8) assay, Transwell assay, and Van Gieson staining. The underlying mechanism was revealed by RNA sequencing, and results were verified by western blot assay. RESULTS: Stereomicroscopy observation and H&E staining confirmed that Periplaneta americana extract accelerated the healing rate of hard palate mucosal wound (p < 0.001) in vivo. Transwell assay and Van Gieson staining assay showed that Periplaneta americana extract promoted the migration and collagen formation of human oral keratinocytes (p < 0.001) and human gingival fibroblasts (p < 0.001) in vitro. Mechanistically, RNA sequencing and western blot assay demonstrated that Periplaneta americana extract promoted hard palate mucosal wound healing via PI3K/AKT signaling, and the beneficial effects of Periplaneta americana extract were abrogated by the PI3K inhibitor LY294002. CONCLUSIONS: Periplaneta americana extract shows promising effects for the promotion of hard palate mucosal wound healing and may be a novel candidate for clinical translation.

Palate shape is associated with Unilateral Hypoglossal Nerve Stimulation Outcomes.

OBJECTIVE: The aim was to determine the potential association between palate shape and unilateral hypoglossal nerve stimulation (HNS) outcomes. METHODS: Preoperative drug-induced sleep endoscopy (DISE) videos were reviewed and scored by 3 blinded reviewers to determine airway narrowing at the hard-soft palate junction (HP), soft palate genu, and inferior velum, as described by Woodson (2014). Scoring was as follows: 1-open airway, 2-narrow, 3-severe narrowing. Overall palate shape (oblique, intermediate, or vertical) was determined based on prior criteria. Successful surgical treatment was defined by the HNS titration polysomnogram as a reduction of ≥50% in the apnea-hypopnea index (AHI) to <15 events/h. RESULTS: Of 332 adults, the majority was male (77%) with an average BMI of 29.2 ± 3.6 kg/m2 . Overall success rate was 73%. Success rate was lower in patients with vertical palate shape compared with the other shapes (56% vs. 75%, p = 0.029). HP score 3 compared with scores 2 and 1 was associated with lower success rates (60% vs. 76%, p = 0.028), but genu and velum scores were not associated with outcomes. Patients with both HP score 3 and complete oropharyngeal lateral wall-related obstruction had notably worse outcomes (22% vs. 74%, p = 0.026). HP score 3 (OR 0.45, 95%CI 0.22-0.92) and vertical palate shape (OR 0.33, 95%CI 0.15-0.78) were independently associated with lower odds of surgical response after adjustment for DISE findings, age, gender, and BMI. CONCLUSION: Vertical palate shape and narrowing at the hard-soft palate junction are independently associated with lower HNS surgical success rates. LEVEL OF EVIDENCE: 3 Laryngoscope, 134:981-986, 2024.

Unraveling a Major Burden of Orofacial Clefts Analyses: Classification of Cleft Palate Fistulas by Cleft Surgeons.

OBJECTIVE: The objective of this study was to investigate how cleft surgeons classify palatal fistulas. We focused on three different anatomical locations (ie, hard palate, soft palate, junction hard/soft palate) to analyze agreement/disagreement at various anatomical locations. DESIGN: Cross-sectional survey study. PARTICIPANTS: Participants in an international webinar that focused on palatal fistula treatment were included. INTERVENTION: Participants were presented with a survey pre- and post-webinar. MAIN OUTCOMES: Frequency of used classification systems for classifying oronasal fistulas and the inter-rater reliability of the Pittsburgh classification system. RESULTS: A total of 141 participants completed the questionnaires prior to the webinar and 109 participants completed the survey after the webinar. In total, four classification systems were used (ie, Pittsburgh, Pakistan Comprehensive Fistula Classification [PCFC], anatomical and 'other'). The Pittsburgh classification was the most commonly used system in all cases. However, Pittsburgh inter-rater reliability was low (κ = 0.136 pre-webinar, and κ = 0.174 post-webinar). Surprisingly, a substantial shift was observed from the anatomical to Pittsburgh classification after the webinar, indicating increased awareness of the usability of the Pittsburgh classification system. CONCLUSIONS: This study demonstrates a large heterogeneity with regards to the classification of cleft palate fistulas. Interestingly, a shift was observed from the anatomical to Pittsburgh classification after the webinar. However, the inter-rater reliability for using the Pittsburgh classification was low. Classifying palatal fistulas in a homogenous fashion could enhance comparison of primary palate repair and could improve treatment of palatal fistulas.

A morphometric approach to morphology analysis of palatal rugae in sibling groups.

Recent advances in imaging technologies, such as intra-oral surface scanning, have rapidly generated large datasets of high-resolution three-dimensional (3D) sample reconstructions. These datasets contain a wealth of phenotypic information that can provide an understanding of morphological variation and evolution. The geometric morphometric method (GMM) with landmarks and the development of sliding and surface semilandmark techniques has greatly enhanced the quantification of shape. This study aimed to determine whether there are significant differences in 3D palatal rugae shape between siblings. Digital casts representing 25 pairs of full siblings from each group, male-male (MM), female-female (FF), and female-male (FM), were digitized and transferred to a GM system. The palatal rugae were determined, quantified, and visualized using GMM computational tools with MorphoJ software (University of Manchester). Principal component analysis (PCA) and canonical variates analysis (CVA) were employed to analyze palatal rugae shape variability and distinguish between sibling groups based on shape. Additionally, regression analysis examined the potential impact of shape on palatal rugae. The study revealed that the palatal rugae shape covered the first nine of the PCA by 71.3%. In addition, the size of the palatal rugae has a negligible impact on its shape. Whilst palatal rugae are known for their individuality, it is noteworthy that three palatal rugae (right first, right second, and left third) can differentiate sibling groups, which may be attributed to genetics. Therefore, it is suggested that palatal rugae morphology can serve as forensic identification for siblings.

Impact of a Palatal Fistula After Cleft Palate Repair on Velopharyngeal Closure.

PURPOSE: A palatal fistula is an adverse outcome of cleft palate repair. It is unknown if a palatal fistula will influence velopharyngeal closure, even after repair of the fistula. This study determines the effect of a soft palate fistula on the risk of developing velopharyngeal insufficiency. METHODS: A retrospective chart review was conducted on patients who underwent primary cleft palate repair between 2000 and 2015, with complete records at 4 years of age. Fistulae involving the secondary palate following primary palatoplasty were classified as the soft or hard palate. A forced-entry multivariate logistic regression model was built to detect predictors of velopharyngeal dysfunction. RESULTS: Records of 329 patients were analyzed with a mean follow-up of 8.7 years. A palatal fistula was identified in 89/329 patients (27%) and 29/329 patients (9%) underwent an independent fistula repair. Of the patients with fistula, 44% were located in the hard palate only and 56% had soft palate involvement. Compared to patients without a fistula, rates of velopharyngeal dysfunction were significantly higher in patients with a fistula involving the soft palate (OR 3.875, CI: 1.964-7.648, P < .001) but not in patients with a hard palate fistula (OR 1.140, CI: 0.497-2.613, P = .757). Veau class, age at primary repair, and syndromic status were not significant predictors of VPI (0.128≤P ≤ .975). CONCLUSIONS: A palatal fistula involving the soft palate is a significant predictor for development of velopharyngeal dysfunction after primary palatoplasty. Surgical intervention, at the time of fistula repair, to add vascularized tissue may be indicated to prophylactically decrease the risk of velopharyngeal dysfunction.

Use of a barrier membrane to repair congenital hard palate defects and to close oronasal fistulae remaining after cleft palate repair: seven dogs (2019-2022).

OBJECTIVE: To describe the use of a barrier membrane in dogs for repair of congenital hard palate defects and closure of oronasal fistulae (ONF) remaining after previous cleft palate (CFP) repair. ANIMALS: 7 client-owned dogs. METHODS: The hard palate defect was closed with medially positioned flaps (Von Langenbeck technique) or pedicle flaps (2-flap palatoplasty) and a membrane composed of autologous auricular cartilage from the pinna or allogenous fascia lata underlying the mucoperiosteal flaps. RESULTS: All palate defects were considered to have a high risk of dehiscence based on their type and size and the characteristics of the surrounding tissue. The barrier membrane was used in 5 dogs for repair of congenital hard palate defects and in 2 dogs for closure of ONF remaining after previous CFP repair. Resolution of clinical signs occurred in all cases. Complete success (ie, complete closure of the palate defect and absence of clinical signs) was achieved in 5 dogs (4 with congenital hard palate defects and 1 with an ONF remaining after previous CFP repair). The persistent ONF in 1 dog with functional success (incomplete closure, but no clinical signs) was smaller than prior to surgery. CLINICAL RELEVANCE: Barrier membranes underlying mucoperiosteal flaps may constitute an alternative technique in dogs for repair of congenital hard palate defects and closure of ONF remaining after previous CFP repair.

Impact of different cephalometric skeletal configurations on anatomic midface parameters in adults.

OBJECTIVES: Skull morphology and growth patterns are essential for orthodontic treatment, impacting clinical decision making. We aimed to determine the association of different cephalometric skeletal configurations on midface parameters as measured in 3D CT datasets. MATERIALS AND METHODS: After sample size calculation, a total of 240 fully dentulous patients between 20 and 79 years of age (mean age: 42 ± 15), who had received a CT of the skull within the scope of trauma diagnosis or intracranial bleeding, were retrospectively selected. On the basis of cephalometric analysis, using MPR reconstructions, patients were subdivided into three different vertical skull configurations (brachyfacial, mesofacial, dolichofacial) and the respective skeletal Class I, II, and III relationships. Anatomic parameters were measured using a three-dimensional post-processing console: the thickness of the maxillary and palatine bones as well as the alveolar crest, maxillary body and sutural length, width and height of the hard palate, maxillary facial wall thickness, and masseter muscle thickness and length. RESULTS: Individuals with brachyfacial configurations had a significantly increased palatal and alveolar ridge thicknesses compared to those with dolichofacial- or mesofacial configurations. Brachyfacial configurations presented a significantly increased length and thickness of the masseter muscle (4.599 cm; 1.526 cm) than mesofacial (4.431 cm; 1.466 cm) and dolichofacial configurations (4.405 cm; 1.397 cm) (p < 0.001). Individuals with a skeletal Class III had a significantly shorter palatal length (5.313 cm) than those with Class I (5.406 cm) and Class II (5.404 cm) (p < 0.01). Sutural length was also significantly shorter in Class III (p < 0.05). CONCLUSIONS: Skeletal configurations have an impact on parameters of the bony skull. Also, measurable adaptations of the muscular phenotype could result. CLINICAL RELEVANCE: The association between viscerocranial morphology and midface anatomy might be beneficial for tailoring orthodontic appliances to individual anatomy and planning cortically anchored orthodontic appliances.

[Assessment of the structural features of the hard palate in endonasal surgery]. / Otsenka anatomii tverdogo neba v khirurgii peregorodki nosa.

Data on the features of the anatomical structure of the hard palate are little described in the scientific literature, and therefore are not taken into account when planning surgical treatment. One of the intraoperative complications during intervention on the lower part of the nasal septum is perforation of the bottom of the nasal cavity, which can develop during a christotomy. This complication mainly depends on the features of the anatomical structure of the hard palate. OBJECTIVE: To study the anatomical structure of the hard palate from the point of view of rhinosurgery, using vector analysis of multispiral computed tomography (MSCT), and to establish anatomical features that should be taken into account when performing surgical interventions on the nasal septum. MATERIAL AND METHODS: 107 patients (30 men, 77 women) were examined without congenital cleft palate and surgical interventions on the structures of the nasal cavity and hard palate. All patients underwent MSCT of the nose and paranasal sinuses (PNS) followed by multiplanar image reconstruction. The key point relative to which the measurements were carried out was the posterior wall of the incisor canal from the side of the nasal cavity. The line corresponding to the bottom of the nasal cavity was chosen as the main vector. In the work, measurements of the thickness of the hard palate (THP) at the level of the palatal suture and the width of the palatal suture (WPS) were carried out. RESULTS: Statistical analysis of the obtained results showed that the THP is 1.74 mm [min 0.28; max 6.46], the WPS is 0.9 mm [min 0.2; max 2.51] (conditional norm). In 19 patients (17.8%), the THP was 0.82 mm, in 2 patients (1.9%) - 0.2 mm. In 3 patients (2.8%), the WPS was equal to 2.5 mm. CONCLUSION: Thus, the data obtained by us indicate that the surgical anatomy of the hard palate is characterized by significant variability, while in some patients the THP can be reduced by 8.8 times, and the WPS increased by 2.7 times compared to normal values. Such anatomical features of the structure of the hard palate should be taken into account when planning septoplasty, since this contingent of patients has an increased risk of developing iatrogenic perforation of the nasal floor during surgical intervention on the lower floor of the nasal septum.

Chondrosarcoma of the maxilla.

A woman in her 70s reported to the outpatient department of our tertiary care hospital with chief complaints of painless swelling in the right cheek and palatal area. The patient was a known case of diabetes mellitus and hypertension on medications with controlled sugars and blood pressure. The swelling was 10×8 cm in size extending from right infraorbital region up to the lower mandible. CT demonstrated a permeative lytic pattern of bone destruction noted involving the hard palate and maxillary bone.Using the Weber Ferguson approach, a surgical resection was carried out under general anaesthesia. Resection included from right total maxillectomy (excluding roof of maxilla), nasal septum up to left medial maxillectomy including hard palate and the tumour was resected en bloc. The palatal obturator was fixed. On the basis of histopathology, grade 1 well-differentiated chondrosarcoma was diagnosed. The patient received postoperative radiotherapy and had a good recovery.

Palatal rugae as an unique and stable marker in personal identification-An interracial pilot study.

Background: In post-mortem scenarios, often it is a very difficult process to establish a person's identity. Rugae are unique in that they are protected from trauma as they are insulated from heat by tongue and buccal pad of fat unlike fingerprint or lip print that is prone to destruction. Aim and Objectives: This study was aimed to compare the palatal rugae among people of different races. The sole objectives of the study were to assess the predominant pattern in the selected groups, reliability of rugae pattern in personal identification, to evaluate reliability of sex determination and to compare the total number of rugae on right and left sides of the palate among the males and females. Study Design: A total of 90 subjects were enrolled into the study and divided into three groups that are African, Dravidian and Mongoloid population. Shapes of rugae present were analyzed according to the classification given by Kapali et al. (1997) and Thomas & Kotze (1983). Result: The predominant rugae shape in African and Dravidian population was wavy pattern, whereas Mongoloid race was predominant in curve pattern. African and Dravidian males were predominant in wavy pattern when compared to Mongoloid males where unification type was more predominant. Conclusion: A statistically significant association between the rugae shape in three populations exists, although subtle yet definite.

Pressure sensor calibration using a water-filled latex finger to account for the mechanical interaction between the hard palate and the deformable human tongue.

We present a calibration system called Dried Water Column (DWC). It applies pressure on a sensor with a latex finger filled with water, which pressure is controlled with a water column. This is intended to mimic the way the deformable tongue mechanically interacts with the hard palate. We show that, once some specificities of the elastic/plastic behavior of the latex finger are taken into account, namely the softening due to Mullins Effect and the non-elastic deformation occurring above a certain pressure level, the DWC provides a reliable measure of the linear relation between the pressure and the output voltage of the sensor within the limited pressure range [0, 2.5 kPa]. Such a precise calibration would not be possible with a rigid actuator, which position on the sensor can dramatically influence the measures. Extrapolating the linear relationship thus determined to a larger pressure range compatible with speech production and swallowing ([0, 35 kPa]), is possible once it has been verified that the behavior of the sensor is linear over this pressure range. This can be done with any rigid or semi rigid actuator. This reliable calibration procedure can be easily reproduced in any laboratory, and can be applied to any pressure sensor.

Natural reference structures for three-dimensional maxillary regional superimposition in growing patients.

BACKGROUND: Assessment of growth-related or treatment-related changes in the maxilla requires a reliable method of superimposition. Such methods are well established for two-dimensional (2D) cephalometric images but not yet for three-dimensions (3D). The aims of this study were to identify natural reference structures (NRS) for the maxilla in growing patients in 3D, opportunistically using orthodontic mini-screws as reference; and to test the applicability of the proposed NRS for maxillary superimposition by assessing the concordance of this approach with Björk's 'stable reference structures' in lateral projection. METHODS: The stability of the mini-screws was tested on longitudinal pairs of pre- and post-orthodontic cone-beam computed tomography (CBCT) images by measuring the distance changes between screws. After verifying the stability of the mini-screws, rigid registration was performed for aligning the stable mini-screws. Then, non-rigid registration was used to establish the dense voxel-correspondence among CBCT images and calculate the displacement of each voxel belonging to the maxilla relative to the mini-screws. The displacement vectors were transformed to a standardized maxillary template to categorize the stability of the internal structures statistically. Those voxels that displaced less relative to the mini-screws were considered as the natural reference structures (NRS) for the maxilla. Test samples included another dataset of longitudinal CBCT scans. They were used to evaluate the applicability of the proposed NRS for maxillary superimposition. We assessed whether aligning the maxilla with proposed NRS is in concordance with the maxillary internal reference structures superimposition in the traditional 2D lateral view as suggested by Björk. This was quantitively assessed by comparing the mean sagittal and vertical tooth movements for both superimposition methods. RESULTS: The stability of the mini-screws was tested on 10 pairs of pre- and post-orthodontic cone-beam computed tomography (CBCT) images (T1: 12.9 ± 0.8 yrs, T2: 14.8 ± 0.7 yrs). Both the loaded and the unloaded mini-screws were shown to be stable during orthodontic treatment, which indicates that they can be used as reference points. By analyzing the deformation map of the maxilla, we confirmed that the infraorbital rims, maxilla around the piriform foramen, the infrazygomatic crest and the hard palate (palatal vault more than  1 cm distal to incisor foramen except the palatal suture) were stable during growth. Another dataset of longitudinal CBCT scans (T1: 12.2 ± 0.63 yrs, T2: 15.2 ± 0.96 yrs) was used to assess the concordance of this approach with Björk's 'stable reference structures'. The movement of the maxillary first molar and central incisor showed no statistically significant difference when superimposing the test images with the proposed NRS or with the classic Björk maxillary superimposition in the lateral view. CONCLUSIONS: The infraorbital rims, maxilla around the piriform foramen, the infrazygomatic crest and the hard palate (palatal vault more than 1 cm posterior to incisal foramen except the palatal suture) were identified as stable regions in the maxilla. These stable structures can be used for maxillary superimposition in 3D and generate comparable results to Björk superimposition in the lateral view.

Nasal cavity perforation by implant fixtures: case series with emphasis on panoramic imaging of nasal cavity extending posteriorly.

The nasal cavity is an important landmark when considering implant insertion into the anterior region of the maxillary arch. The perforation of implants into the nasal cavity may cause complications, such as implant migration, inflammation, or changes in nasal airflow; thus, precise assessment of the nasal cavity is mandatory.Three cases of nasal cavity perforation by dental implants are presented, including one case of implant fixture migration into the nasal cavity. On panoramic radiographs of the patients, the following common features were observed: the horizontal radiopaque line of the hard palate was observed to be inferior to or similar to that of the antral floor and the bone between the lateral wall of the nasal cavity and the medial wall of the maxillary sinus was emphasized in a triangular shape.When the maxillary sinus is small and alveolar bone resorption is severe, panoramic evaluation may cause overestimation of the available residual bone, particularly in the maxillary canine/premolar region. Therefore, the residual bone should be reevaluated three-dimensionally to measure the exact bony shape and volume.

Speech Outcomes Audit for Unilateral Cleft lip and Palate After 2-Stage Palate Repair: Preliminary Results.

Primary cleft lip and palate surgeries can interfere with speech status, facial appearance, maxillary growth, and psychosocial and academic development. Therefore, different surgical protocols and techniques have been proposed, and adequate velopharyngeal function and speech is the main goal for the treatment success. The present study aimed to report preliminary speech results of the 2-stage palate repair of children with unilateral cleft lip and palate. One hundred seventy nonsyndromic patients with unilateral cleft lip and palate were included in this report, 35% males and 65% females, submitted to the 2-stage palatoplasty protocol, composed by lip, nasal ala, and hard palate repair at 3 to 6 m (stage 1) and soft palate repair at 12 to 18 m (stage 2). The target age range for speech recording was 5 to 10 years, and the speech material included repetition of Brazilian Portuguese sentences. These samples were obtained over 5 years and assessed by 3 of 14 experienced speech pathologists. When discordant, the majority rate was adopted. Average velopharyngeal dysfunction (VPD) rates were 19,5%, varying according to the soft palate technique, with better results when the Sommerlad technique was performed (VPD=11%), followed by Braithwaite (VPD=15%) and then Von Langenbeck (VPD=25%). Passive errors were observed in 32% and active errors in 25%. Speech results reflect the outcomes of an interdisciplinary team's work, where facial growth and nasolabial appearance must also be considered. Further analysis and a wider casuistic are recommended. Hence outcomes audit needs to be a permanent process, providing solid and updated evidence for optimal cleft care.

Three-dimensional mapping of the greater palatine artery location and physiology.

OBJECTIVE: To develop a novel technique for localizing and reconstructing the greater palatine artery (GPA) using three-dimensional (3D) technology. METHODS: A miniaturized intraoral ultrasound transducer was used to imaging landmarks including the GPA, gingival margin (GM), and palatal masticatory mucosa (PMM). A 5-mm-thick solid hydrogel couplant was integrated to replace traditional ultrasound gel and avoid bubbles when moving the transducer. RESULTS: A panorama image provided the relative localization of landmarks including the GPA, PMM, and hard palate. Short- and long-axis imaging of GPA was performed in five subjects including 3D mapping of GPA branches and surrounding tissues in a volume of 10 mm × 8 mm × 10 mm. Full-mouth Doppler imaging was also demonstrated on both the dorsal and ventral tongue as well as buccal mucosa and sublingual region on two subjects. CONCLUSIONS: This study can measure the vertical distance from the GM to the GPA and depth from PMM to GPA and visualize the GPA localization in a 3D manner, which is critical to evaluate the available volume of palatal donor tissues and avoid sectioning of GPA during surgical harvesting of the tissues. Finally, the transducer's small size facilitates full-mouth Doppler imaging with the potential to improve the assessment, diagnosis, and management of oral mucosa.