Noninvasive conservative management of anterior open bite treated with TADs versus clear aligner therapy.

OBJECTIVES: Anterior open bite can be treated non-surgically via molar intrusion using temporary skeletal devices (TAD). Clear aligner therapy (CAT) is recognized as a viable therapeutic modality for non-extraction treatment of adults with mild open bite. This study aimed to compare the treatment effect and mechanisms of open bite closure between patients treated with braces and TADs double arch intrusion and those treated with CAT. Treatment success at T3 was based on 1- positive overbite on ceph; 2- Change in the vertical dimension 3- post treatment POSI score equal to zero. MATERIAL AND METHODS: The TAD group includes 18 consecutively treated patients from the main author. The CAT group consisted of 16 selected patients from three different orthodontists. The observation time points were as follows: pretreatment (T1), end of molar intrusion and positive overbite achieved (T2), end of treatment (T3), at least 6-month follow-up (T4). Treatment changes were assessed by cephalometric analysis and frontal intraoral photo. RESULTS: At the end of treatment, 100% of the patient of the TAD group and 78,6% of the CAT group had a posi score of 0. The TAD group showed a significant reduction in vertical measurements (SN-MPA: -1,55° ± 0.41, LAFH: -3,05 ± 0.51 mm, U6-PP: -1.48 ± 0.30 mm), but the CAT group did not have significant changes for these variables. Both groups had significant increases in overbite from T1 to T3 (TAD: 4,32 ± 0,5 mm; CAT: 2,33 ± 0.56 mm), and overbite remained stable at T4. The CAT group did not have a significant upper molar intrusion, but a significant extrusion of 1.22 ± 0.42 mm of the lower incisor occurred. CONCLUSION: The TAD group achieved bite closure by upper molar intrusion, lower molar and incisors vertical control, and mandibular plane counterclockwise rotation, resulting in an improved AP and vertical relationship. The CAT group achieved bite closure through the lower incisor extrusion without significant change in the vertical dimension. CLINICAL RELEVANCE: This study provides relevant information about the skeletal and dental changes of open bite treatment with TADs double arch intrusion. The comparison with a control group treated with CAT confirms known information.

Prevalence of malocclusion and oral health-related factors among pre-school children in Northern Albania.

The aim of the present study was to investigate prevalence and association between malocclusion and caries among pre-school children aged 4-6 years frequenting public kindergartens in Shkodër, the largest city in North Albania. The sample for this descriptive and cross-sectional study included 389 pre-school children aged 4-6 years frequenting 20 public kindergartens in Shkodër, the largest city in North Albania. The participants were divided into two groups according to their caries experience evaluated, as determined by decayed-missing-filled index dmf (World Health Organization criteria) score. Those with dmf score of zero were considered to be free of caries. The prevalence of children with at least one malocclusion trait was 89%. The prevalence of caries was 66% (mean dmf score: 3.63). Increased overbite (43%), followed by increased overjet, were the most prevalent malocclusion traits observed in children with a dmf of zero. Among children with caries, the most prevalent trait was increased overjet (42%) and increased overbite. Almost half of the entire study population had a straight terminal plane and class I canine relationship. There was a similar prevalence of bilateral crossbite. Significant changes (p = 0.008) were observed between the groups with regards to the absence of spacing in the maxillary anterior region. Regression analysis further revealed that children with an absence of maxillary spacing were 2.564-fold more likely to have caries; those with a deepbite were 0.814-fold more likely to have caries. More than half of the children had caries. Increased overjet, overbite, crossbite and maxillary crowding were malocclusion traits observed in the population included in this study. A positive association was identified between maxillary crowding, deepbite and caries. The association between malocclusion and caries, highlights the necessity for an increased awareness of these two conditions that are commonly found among children of pre-school age.

Occlusal characteristics in modern humans with tooth agenesis.

Non-syndromic permanent tooth agenesis affects a significant proportion of the population, especially if third molars are considered. Although tooth agenesis has been linked to a smaller craniofacial size, reduced facial convexity and a shorter skeletal face, the occlusal characteristics of individuals with tooth agenesis remain largely unexplored. Therefore, this study investigated potential associations between tooth agenesis and metric occlusal traits in 806 individuals (491 with 4.1 missing teeth per subject, including third molars, and 315 without any tooth agenesis). Dentoskeletal morphology was defined through anatomical landmarks on pre-treatment cephalometric radiographs. Multivariate regression models, adjusted for sex and age, showed that tooth agenesis was significantly associated with a reduced overjet, an increased interincisal angle, and shorter upper and lower dental arch lengths, but not with overbite. Moreover, apart from reduced tooth length and dentoalveolar effects, as the number of missing teeth increased the upper front teeth were progressively retruded according to the craniofacial complex and to the face. Thus, tooth agenesis has a substantial influence on dental and occlusal characteristics, as well as on the sagittal position and inclination of anterior teeth. These findings emphasize the necessity for personalized, multidisciplinary approaches in individuals with multiple agenesis to successfully meet treatment goals.

Does aligner refinement have the same efficiency in deep bite correction?: A retrospective study.

BACKGROUND: Refinements are very common in clear aligner treatments. The aim of this study is to assess whether the predictability of deep overbite correction is similar over several refinements using clear aligners (Invisalign, Align Technology, San Jose, Calif) and examine the accuracy of vertical movement and inclination change of individual teeth. METHODS: This retrospective study included 20 deep bite patients (7M and 13F; 32.63 ± 11.88 years old; an initial overbite of 5.09 ± 0.98 mm), consecutively treated from September 2016 and March 2023, who completed at least two sets of aligners, including refinements. The initial, predicted, and achieved models were exported from ClinCheck or OrthoCAD (Cadent Inc, Carlstadt, NJ) and superimposed via best-fit surface-based registration using SlicerCMF (version 4.9.0; cmf.slicer.org). We also examined 15 out of 20 patients who completed treatments. The overbite correction and changes in vertical movement and inclination for individual teeth were measured. Descriptive statistics and a paired t-test or Wilcoxon signed-rank test were performed. P < 0.05 was considered statistically significant. RESULTS: The mean accuracy of overbite correction was 37.63% after 1st set, followed by 11.19%, 6.32%, and 13.80% (2nd-4th sets), respectively. There were statistically significant differences between the predicted and achieved vertical movements and inclination changes for all teeth for the 1st and 2nd sets. For the completed cases, the mean overbite correction was 38.54% compared to the initially planned overbite correction, which is similar to one of the 1st set. Still, the vertical movements and inclination changes of all teeth present statistically significant differences between the initially planned and finally achieved movements except for maxillary lateral incisor torque. CONCLUSIONS: The most overbite correction occurs during the 1st set of aligners, and refinement treatment does not significantly improve the deep bite correction.

Autistic individuals have worse oral status than neurotypical controls: a systematic review and meta-analysis of observational studies.

OBJECTIVE: To compare dental caries, oral hygiene, periodontal status, bruxism, malocclusion, tooth loss, and salivary alterations between autistic and typical developing individuals. MATERIAL AND METHODS: Observational studies presenting clinical measures of oral outcomes between autism spectrum disorder (ASD) individuals and controls. EMBASE, LILACS, PubMed, PsycINFO, Scopus, Web of Science, Google Scholar, and ProQuest were searched up to June 26, 2023. Pairs of reviewers independently conducted study selection, data extraction, and assessments of methodological quality and certainty of evidence. Meta-analyses of standardized mean differences (SMD) and risk ratio (RR) were performed. RESULTS: A total of 47 studies comprising 6885 autistic individuals were included in the review. Autistic individuals had significantly higher severity of dental-caries experience in primary teeth (SMD 0.29, 95%CI 0.02, 0.56), of dental plaque presence (SMD 0.59, 95%CI 0.24, 0.94), and of gingivitis (SMD 0.45, 95%CI 0.02, 0.88). Autistic individuals showed higher probability of occurrence of gingivitis (RR 1.34, 95%CI 1.08, 1.66,), bruxism (RR 4.23, 95%CI 2.32, 7.74), overjet (RR 2.16, 95%CI 1.28, 3.64), overbite (RR 1.62, 95%CI 1.02, 2.59), crossbite (RR 1.48, 95%CI 1.02, 2.13), and openbite (RR 2.37, 95%CI 1.46, 3.85), when compared to neurotypical individuals. Most estimates showed a small effect size with very low certainty of evidence. CONCLUSION: Autistic individuals show worse oral health status than controls. CLINICAL RELEVANCE: The findings reported herein can help to build health policies to better serve autistic individuals including prevention actions and access to specialized dental care.

Biomechanical and clinical considerations in deep bite treatment using temporary skeletal anchorage devices.

Deep bite is usually treated by intrusion of the anterior teeth, extrusion of the posterior teeth, or a combination thereof. Various traditional methods have been used to correct deep bites, but they can cause negative side effects. Recently, temporary skeletal anchorage devices (TSADs) have been used to intrude the anterior teeth simply and efficiently without side effects. The amount of incisal exposure at rest should be considered as the first factor in determining which tooth segment should be intruded to correct a deep bite. The center of resistance of the anterior teeth should be considered to achieve the proper biomechanics when intruding them. The location of TSADs should be determined to ensure sufficient interradicular bone to achieve the desired tooth movement. Therefore, clinicians should understand the biomechanical and clinical considerations to correct a deep bite using TSADs.

Dentoalveolar effects of skeletally anchored extrusion arch in anterior open bite patients: A prospective clinical trial.

OBJECTIVE: The purpose of this prospective clinical trial was to explore the dental and soft tissue changes accompanying the use of skeletally anchored nickel-titanium (NiTi) extrusion arch in the correction of anterior open bite (AOB). MATERIAL AND METHODS: Twenty female patients with a mean age of 16.5 ± 1.5 years and a mean dentoalveolar AOB of 2.38±0.7 mm participated in this study. All patients were treated with an maxillary 0.017×0.025-in NiTi extrusion arch, with the aid of miniscrews inserted between the maxillary second premolars and first molars bilaterally, to act as indirect anchorage. Three-dimensional digital models and lateral cephalometric radiographs were taken just before the insertion of the extrusion arch (T0) and after 10 months (T1). Paired-sample t-tests were used in analyzing the data, to evaluate the changes after treatment (T1-T0). A significance level of p < 0.05 was used. RESULTS: AOB was successfully closed in all patients, with a 4.35 ± 0.61 mm increase in the overbite. Maxillary incisors significantly extruded (2.52 ± 1.02 mm) and significantly reclined (5.78 ± 0.77°), with a resultant decrease in the overjet of 1.58 ± 0.5mm. A significant intrusion of maxillary first molars with no change in their inclination was observed. The upper lip showed a significant retraction tendency to the E-plane, and a significant increase in the nasolabial angle was observed. CONCLUSION: The skeletally anchored NiTi extrusion arch was an effective technique in treating AOB, with no adverse effects on the molars.

Comparison of posttreatment stability after total mandibular arch distalization with mini-implants and mandibular setback surgery.

OBJECTIVES: To compare posttreatment stability in skeletal Class III patients between those treated by total mandibular arch distalization (TMAD) with buccal mini-implants and those by mandibular setback surgery (MSS). MATERIALS AND METHODS: The samples included 40 Class III adults, 20 treated by TMAD using buccal interradicular mini-implants and 20 treated with MSS. Lateral cephalograms were taken at pretreatment, posttreatment, and at least 1-year follow-up, and 24 variables were compared using statistical analysis. RESULTS: Mandibular first molars moved distally 1.9 mm with intrusion of 1.1 mm after treatment in the TMAD group. The mandibular incisors moved distally by 2.3 mm. The MSS group exhibited a significant skeletal change of the mandible, whereas the TMAD group did not. During retention, there were no skeletal or dental changes other than 0.6 mm labial movement of the mandibular incisors (P < .05) in the MSS group. There was 1.4° of mesial tipping (P < .01) and 0.4 mm of mesial movement of the mandibular molars and 1.9° of labial tipping (P < .001) and 0.8 mm of mesial movement of the mandibular incisors in the TMAD group. These dental changes were not significantly different between the two groups. CONCLUSIONS: The TMAD group showed a slightly decreased overjet with labial tipping of the mandibular incisors and mesial tipping of the first molars during retention. Posttreatment stability of the mandibular dentition was not significantly different between the groups. It can be useful to plan camouflage treatment by TMAD with mini-implants in mild-to-moderate Class III patients.

Adult female skeletal anterior open bite treated by customized lingual orthodontic appliance with miniscrews-assisted in vertical control for perfect orthodontic compensation: A case report with 5-year follow-up.

The benefits of lingual orthodontics go beyond appearance. In this case study, a 30-year-old female patient was treated with a custom lingual orthodontic appliance for a Class II high-angle malocclusion, anterior open bite, incisor biprotrusion and crossbite, unilateral second molar scissor bite and dysfunctional tongue thrust. To achieve a counterclockwise rotation of the mandible, implant anchorage was used to control the vertical height. To complete the compensatory therapy, four first premolars were removed. As well as ensuring aesthetics over the 20-month treatment period, the treatment also established a Class I molar relationship, normal overbite and overjet, and improved the facial profile. After a five-year follow-up, the treatment results remained stable.

The skeletal and dental effects of Hanks Herbst versus twin block appliances for class II correction in growing patients: a randomized clinical trial.

BACKGROUND: Despite the popularity of the Twin Block (TB) and the Hanks Herbst (HH) functional appliances, there is limited prospective research comparing these removable and fixed designs, respectively. OBJECTIVES: To evaluate and compare the skeletal and dental effects associated with TB and HH functional appliances as well as to detect factors that might influence the success or failure of treatment in adolescents with Class II malocclusion. DESIGN AND SETTING: A parallel-group randomized controlled trial was undertaken in a single-centre hospital in the United Kingdom. METHODS: A total of 80 participants (aged 10-14 years) with overjet of 7 mm or more were randomized to receive either the HH or TB appliance. Cephalometric radiographs were collected at the start of the study and immediately after the withdrawal of the functional appliances and measured using Pancherz analysis. Participants were allocated to the TB or HH group, based on an electronic randomization, stratified for gender and allocation concealed. Blinding to the allocated arm was not possible. However, all data were coded and anonymized to ensure that assessors were blinded to the group allocation. The main outcome was the anterior-posterior skeletal and dento-alveolar changes at the end of the functional phase. RESULTS: Fifteen (37.5%) participants from the TB group and 7 (15.5%) from HH failed to achieve full overjet reduction (<4 mm) after 12 months of treatment. Overjet reduction was 2 mm greater with HH compared to TB (P = .05; 95% CI: 0.2, 3.2). No significant differences regarding skeletal and dental changes were reported, with the exception that participants in HH group experienced greater lower molar protraction (P = .002; 95% CI: -2.8, -0.8) and mandibular incisors advancement (P = .001; 95% CI: -2.9, -1), indicating greater dental than skeletal effects. CONCLUSION: The TB appliance was associated with a higher rate of treatment discontinuation. No significant clinical differences were observed in the skeletal and dental effects, although the HH may be associated with more pronounced effects on the mandibular dentition. CLINICAL TRIAL REGISTRATION: The protocol was registered online before the start of the trial (ISRCTN11717011).

Does age influence deep overbite correction with Invisalign? A prospective study evaluating mandibular incisor intrusion in adolescents vs adults.

OBJECTIVE: To compare the accuracy of mandibular incisor intrusion with Invisalign (Align Technology, Santa Clara, Calif) in adolescents to that in adults. MATERIALS AND METHODS: This prospective clinical study included 58 patients treated with either Invisalign Teen or Invisalign Full. Mandibular central and lateral incisors were measured on digital models created from intraoral scans. Predicted values were determined by superimposing the initial and final ClinCheck models, and achieved values were determined by superimposing the initial ClinCheck models and the digital models from the final scans. Individual teeth were superimposed with a best-fit analysis and measured using Compare software (version 8.1; GeoDigm, Falcon Heights, Minn). RESULTS: The mean accuracies of mandibular incisor intrusion were 63.5% in adolescents and 45.3% in adults, and this difference was statistically significant. The amounts of achieved intrusion were 1.7 mm in adolescents and 0.9 mm in adults, and this difference was also statistically significant. Overall, there was a weak negative correlation between age and accuracy; as age advanced, the accuracy of mandibular incisor intrusion diminished slightly. CONCLUSIONS: Mandibular incisor intrusion with Invisalign is significantly more accurate in adolescents than in adults. Orthodontists could contemplate reducing the degree of overcorrection for mandibular incisor intrusion in adolescents with deep overbites undergoing Invisalign Teen but still implementing the reverse curve of Spee mechanics.

Loss of attachments in patients during orthodontic therapy with clear aligners: A prospective clinical study.

OBJECTIVE: This study aimed to assess the loss rate of attachments and investigate its probable influencing factors in patients during orthodontic therapy with clear aligners. MATERIALS AND METHODS: A total of 55 patients treated with clear aligners were enrolled in this prospective clinical study. The loss rate of attachments was evaluated after a 6-month follow-up since the initial bonding was finished. The attachment survival curves were gone through Kaplan-Meier estimates. The Cox regression model with shared frailty was conducted to evaluate the hazard ratios (HRs) for the following factors, including sex, age, dental malocclusion, vertical skeletal pattern, anterior overbite, operators, tooth extraction, attachment amount, arch, tooth position and attachment type. RESULTS: There were a total of 47 patients (14 males and 33 females; and mean age: 26.77 ± 8.45) in which 722 attachments were involved in the final analysis. During the 6-month follow-up, 99 attachments were lost by 40 participants. The overall loss rate was 13.7%. The loss of attachments was more common in the early months of therapy. During the first 2 months, 71 attachments were lost. The loss rate of attachments was not significantly affected by sex, age, dental malocclusion, vertical skeletal pattern, anterior overbite, operators, tooth extraction, attachment amount and attachment type (P > 0.05). The loss rate of mandibular attachments was 1.8 times that of maxillary attachments (HR = 1.8; 95% CI: 1.2-2.8; P = 0.009). The loss rate of molar attachments was 5.5 times that of incisor attachments (HR = 5.5; 95% CI: 1.6-19; P = 0.007). CONCLUSION: During the first 6 months, the overall loss rate of attachments was 13.7%. In the early months of therapy, loss of attachments was more common. The loss rate decreased as treatment time increased. Loss of attachments was significantly affected by arch and tooth position, with higher loss rates in the mandibular arch and molars. Besides, loss of attachments was not affected by sex, age, dental malocclusion, vertical skeletal pattern, anterior overbite, operators, tooth extraction, attachment amount and attachment type.

The effect of vertical skeletal proportions on overbite changes in untreated adolescents: a longitudinal evaluation.

OBJECTIVES: To evaluate the change in overbite within an untreated cohort from 9 to 18 years of age and to compare age-related changes in overbite depth based on vertical skeletal proportion. MATERIALS AND METHODS: Lateral cephalograms were obtained from the American Association of Orthodontists Foundation (AAOF) Craniofacial Growth Legacy Collection Project. All cephalometric outcome measures were assessed at ages 9-11 (T1), 13-15 (T2), and 17-19 (T3) years. Generalized estimating equation (GEE) regression models were fit to examine the effect of MP-SN on overbite adjusted for age and gender. RESULTS: A total of 130 subjects from the Denver, Bolton Brush, and Oregon Growth Studies were included. Overbite was relatively constant from T1 to T3 irrespective of facial type, with a minor decrease (0.15 mm) being observed overall. There was a transient increase between T1 and T2 (0.31 mm) that was canceled out by changes during later adolescence. Based on the GEE regression model adjusted for time and gender, a minor but statistically significantly greater reduction in overbite arose as MP-SN increased (coefficient = -0.080; 95% confidence interval -0.12, -0.04; P < .01). CONCLUSIONS: In hyperdivergent subjects, a marginal decrease in overbite was observed from 9 to 18 years of age, with a transient increase from the period spanning 9-11 years to 13-15 years, which was negated in later adolescence. There are limited data to suggest that observation of vertical growth is required in most patients with marginally increased vertical facial proportions in the juvenile and pubertal phases.

Predicted overbite and overjet changes with the Invisalign appliance: a validation study.

OBJECTIVES: To investigate whether the predicted changes in overbite (OB) and overjet (OJ) in Align Technology's (Santa Jose, Calif) digital treatment plan for the prescribed course of treatment with the Invisalign appliance were consistent with those same changes in OB and OJ measured with the Geomagic Control X (Geomagic US, Research, Triangle Park, NC) metrology software system. MATERIALS AND METHODS: Geomagic Control X software was used to determine OB and OJ differences between the pretreatment and predicted outcome. STL files for patients satisfying inclusion criteria and undergoing nonextraction orthodontic treatment with the Invisalign appliance. The differences were compared, using the Bland-Altman analysis, to the corresponding data provided by Align Technology's digital treatment-planning interface, ClinCheck. RESULTS: Data regarding 76 adult patients who satisfied strict inclusion criteria were assessed. The Shapiro-Wilks test indicated normality (P > .05). The Bland-Altman analysis showed high levels of agreement between the two measurements, with a bias range of -0.131 to 0.111 for OB and -0.393 to 0.03 for OJ recorded. CONCLUSIONS: Clinicians and researchers can be confident that measurement data provided by Invisalign's ClinCheck digital treatment-planning facility concerning OB and OJ changes from the initial to the predicted treatment outcome are valid.

Risk factors associated with traumatic dental injuries in individuals with special healthcare needs-A systematic review and meta-analysis.

BACKGROUND/AIM: Individuals with special healthcare needs (SHCN) are more likely to sustain traumatic dental injuries (TDIs) due to distinct risk factors. The aim of this review was to assess various risk factors associated with TDIs in individuals with SHCN. MATERIALS AND METHODS: The protocol was designed according to the recommendations of the Cochrane-handbook, Joanna Briggs Institute, and the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines and registered in PROSPERO (CRD42022357422). A comprehensive search was performed in PubMed, LILACS, Web of Science, EMBASE and Scopus using a pre-defined strategy without any limitation of language and year of publication. It was last updated on 25 April 2023. Studies addressing the TDIs in individuals with SHCN were included. Data extraction and analyses were performed, risk of bias (ROB) assessment was done using the Joanna Briggs Institute's critical appraisal tool, and a meta-analysis was performed using random-effects model. RESULTS: A total of 21 studies were included in the review. They were categorized according to the target disease/condition: cerebral palsy (n = 5), ADHD and autism spectrum disorders (n = 5), visually impaired (n = 4), and multiple disorders (n = 7). The studies showed variability in the design and methods; however, 17 out of 21 studies showed moderate to low ROB. Increased overjet and lip incompetence were the main risk factors reported in the studies. The commonest injuries were observed to be enamel and enamel and dentine fractures. CONCLUSION: The overall pooled prevalence of TDI in individuals with special healthcare needs was 23.16% with 20.98% in males and 27.06% in females. Overjet >3 mm and inadequate lip coverage were found to be associated with a higher risk of TDI in all the categories of individuals with special healthcare needs except ADHD and ASD. Falls at home in cerebral palsy, falls while walking and self-harm in ADHD and ASD, falls at home and collision in visual impairment, and unspecified falls in multiple disorders could be identified as the most common cause of TDI.

Effect of functional appliances on sleep-disordered breathing in Class II division 1 malocclusion children: Randomized controlled trial.

OBJECTIVES: A randomized controlled trial was undertaken to investigate the orthopaedic effect of functional appliances on the pharyngeal airway space and nocturnal breathing of children with skeletal class II due to mandibular retrusion. MATERIALS AND METHODS: Forty patients were randomized into a 1:1 ratio study (Twin block) group and a control (fixed appliance) group. Each group included equal numbers of boys and girls. Diagnosis with sleep-disordered breathing was not an inclusion criterion. The duration of the trial was 12 months (T0 - T12). Eligibility criteria included skeletal Class II division 1 malocclusion with mandibular retrognathism, SNA ≥82, SNB ≤78, ANB ≥4, overjet ≥6 mm, and patients in circumpubertal stage CVM2 and CVM3. The main outcomes were pharyngeal airway volume, oxygen desaturation index (ODI), and maximum expiratory pressure (MEP), while the secondary outcomes were skeletal and dental changes of the maxilla and mandible. Randomization was accomplished with random blocks of 20 patients with allocation concealed in sequentially numbered, opaque, and sealed envelopes. Blinding was only applicable for data analysis of radiographic measurements and data extracted from the pulse oximeter. RESULTS: The mean age of the patients was 10 ± 1.5 and 10 ± 1.2 at (T0) for the Twin Block and the control groups, respectively. The changes in the oropharyngeal (2.66 cc and 0.056; P = .03) and nasopharyngeal (1.3 cc and 0.84; P = .053) airway volumes for the Twin block and control groups, respectively, were significantly different for the oropharynx. There was a significant decrease in ODI by [median -3.55 (-5.05 to 0.50); P ≤ .001] and a significant increase [median 45 (0.0-110); P ≤ .001] in MEP for the Twin block group. A significant inverse correlation (r = -.589; P = .006) could be found between the total volume of the oropharynx and ODI. No serious harm was observed. CONCLUSIONS: The Twin block group showed significant change in oropharyngeal airway volume and improvement of nocturnal breathing. REGISTRATION: This trial was registered at https://www. CLINICALTRIALS: gov, registration number NCT04255511.

A comparison of skeletal and dental changes in patients with a Class II relationship treated with clear aligner mandibular advancement and Herbst appliance followed by comprehensive orthodontic treatment.

INTRODUCTION: The objective of this study was to compare the skeletal and dental changes of patients with a Class II relationship treated with clear aligner mandibular advancement (MA) and Herbst appliances followed by comprehensive orthodontic treatment. METHODS: The participants included 20 patients treated with MA and 20 with the Herbst appliance. Orthodontic records were taken before treatment, after the functional appliance, and completion of phase II treatment. The skeletal and dental changes across the 3-time periods were evaluated using a matched paired t test for each treatment. A 2-sample t test was used to examine the changes across periods between 2 treatment groups (P <0.05). RESULTS: Significant reduction in overjet, overbite, and change in molar relationship were obtained by both appliances with similar skeletal and dental contributions. This was contributed by a forward movement of the mandible and mandibular molars, backward movement of the maxillary molars, and retraction of the maxillary incisors. After phase II treatment, both appliances could maintain the skeletal and dental changes achieved during the advancement phase. Greater change in overbite (2.4 mm vs 1.4 mm), an eruption of maxillary incisors (0.9 mm vs 0.1 mm), and proclination of mandibular incisors were found with the Herbst group (3.9° vs -2.1°). The average total treatment time was similar with the 2 appliances. CONCLUSIONS: Both functional appliances were equally effective in reducing the overjet and overbite and achieving a Class I molar relationship with a similar length of treatment time. The Herbst design lacked control of the mandibular incisor proclination, and clear aligners offered better vertical control and management of the mandibular incisor inclination.

Predicted and achieved overjet and overbite measurements with the Invisalign appliance: a retrospective study.

OBJECTIVES: To determine whether achieved outcome regarding overjet and overbite matched the predicted outcome following treatment with Invisalign (Align Technology, San Jose, Calif) aligner appliances. MATERIALS AND METHODS: Data including pretreatment, predicted and achieved overjet, and overbite measurements provided by Align's digital treatment facility, ClinCheck Pro, were evaluated. Descriptive statistics, Mann-Whitney U-test, and Wilcoxon rank-sum intraclass correlation (ICC) test results were calculated. RESULTS: From an initial sample of 600, 355 adult patients satisfied the inclusion and exclusion criteria. ICC scores for data input were excellent. Median (interquartile range [IQR]) age was 30.14 (23.33, 39.92) years and most (n = 259; 72.95%) were women. Almost one-third (n = 101; 28.45%) had undergone extraction as part of their treatment. More aligners were prescribed in the initial digital treatment plan for patients (median, 44; IQR: 35, 51.5; minimum, 17; maximum, 92) undergoing extractions as part of their orthodontic treatment than those who were not (median, 24; IQR: 18.25, 32; minimum, 13; maximum, 85) (P < .0001). Planned changes in overjet differed significantly from achieved outcomes (P < .001). Planned increases in overbite resulted in up to more than twice (222.72%) as much increase than predicted. Planned reduction of overbite achieved 8.69% of its predicted reduction in extraction cases. CONCLUSIONS: Achieved overjet and overbite measurements differed significantly from the predicted outcomes at the end of an initial sequence of aligners. Planned increases in overbite resulted in greater overbite correction than predicted, particularly in extraction cases. Planned overbite reduction was challenging, especially in patients with extractions.

Clear aligner treatment assisted by mini screw for an adult with Class II division 2 malocclusion and a right upper canine completely outside of the dental arch: A case report.

This case report describes a 19-year-old man presented with a 5.7-mm deep overbite, Class II division 2 malocclusion with the right upper maxillary canine completely buccal ectopia, deviated midline in the upper arch, severe crowding and retroclination of the maxillary and mandibular incisors. The patient was treated with clear aligners to correct the Class II relationship and the deep overbite. A series of clear aligners were used to move bilateral maxillary molars distally with unilateral mini-screw anchorage. The final results showed that clear aligners with mini-screws could effectively achieve the required upper distal molar movement thanks to a reasonable design of the stages and anchorage. The treatment was completed in 19 months and the patient was satisfied with the treatment outcome in this context of mild to moderate Class II division 2 malocclusion.