A novel subcritical water synergistic co-treatment of brominated epoxy resin and copper-based spent catalysts: debromination, phenol production, and copper recovery.

In this study, a high-efficiency co-treatment strategy for brominated epoxy resin (BER) and copper-based spent catalyst (CBSC) was developed by using subcritical water (SubCW) process. Multivalent species of copper released from CBSC could accelerate the electron transfer of the SubCW system and efficiently catalyze radical reactions to promote the debromination and decomposition of BER, and had an effect on the capture and binding of bromine species. Meanwhile, the formation of HBr by the BER debromination resulted in a decrease in the system pH and markedly enhanced the leaching/recovery of Cu from CBSC. The optimal conditions of the SubCW co-treatment process were as follows: reaction temperature of 350 °C, solid-to-liquid ratio of 1:30 g/mL, BER-to-CBSC mass ratio of 10:1 g/g, and reaction time of 60 min. Under the optimal conditions, 97.12 % of the Br could be removed from BER by the SubCW co-treatment process and a high-purity phenol (64.09 %) could be obtained in the oil phase product, and 86.44 % of Cu in the CBSC could be leached and recovered. The introduction of CBSC significantly changed the decomposition path of BER. Compared to the SubCW process without CBSC, bromine-free oils products could be obtained by the co-treatment process of BER and CBSC at low-temperature. This study provided a novel understanding of resource conversion mechanism of BER and CBSC in subcritical water medium via the synergistic effect between the two different waste streams to improve treatment efficiency and synchronously recover high-value products.

Chromoproduct approach to achieve environmentally sound management of e-waste plastics: Colombian project case.

Research to prevent releases of brominated flame retardants listed as persistent organic pollutants by the Stockholm Convention (POP-BFRs) was conducted through an international cooperation project in Colombia. Six waste electrical and electronic equipment (WEEE) management facilities implemented: 1) sorting e-waste by product type and color (black, white, and other; henceforth called chromoproducts), 2) sampling test products and their plastic fraction (called sets, separated by polymer type), 3) monitoring mass, bromine and antimony contents by hand-held X-ray fluorescence (XRF) and POP-BFRs such as polybrominated diphenyl ethers (PBDEs) by gas chromatography and mass spectrometry (GC-MS), and 4) differentiated treatment according to categories that used the Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (RoHS) hazardousness threshold of 1000 mg ∑PBDEs/kg. This scheme led to the proposal of a methodology for WEEE management called the "chromoproduct approach". 994,230 products were managed and grouped into 222 chromoproducts, from which 77 were analyzed: 50 below RoHS hazardousness (BRH), 16 above RoHS hazardousness (ARH), and 11 unknown RoHS hazardousness (URH). XRF indicators using bromine and antimony contents could rule out pollution in BRH chromoproducts; however, categorization still required GC-MS. One ARH plastics sample had 3620 mg ∑PBDEs/kg, while no POP-BFRs were found in the BRH plastics sample. The implementation of the chromoproduct approach traced 153.6 tonnes of ARH plastics. BRH plastics composition was estimated and used in a pilot-scale closed-loop economic activity. The chromoproduct approach seems promising for avoiding POP-BFR releases and promoting the upcycling of recyclable e-waste plastics.

Degrading surface-water-based natural organic matter and mitigating haloacetonitrile formation during chlorination: Comparison of UV/persulfate and UV/hydrogen peroxide pre-treatments.

Haloacetonitriles (HANs) are unregulated disinfection by-products that are more toxic than regulated species. Therefore, efficient decomposition of HAN precursors prior to disinfection is crucial for allaying the potential HAN-induced health risks. This study investigated the key roles of ultraviolet-activated persulfate (UV/PS) treatment in alleviating HAN formation. The effects of UV/PS treatment were evaluated by correlating with the characteristics of organic matter in surface water and comparing with conventional UV/H2O2 treatment. Upon irradiating raw water samples and a Suwannee River humic acid solution spiked with 10 mM PS or H2O2 with 254 nm UV light, UV/PS treatment was found to be more potent than UV/H2O2 in mitigating the HAN production and degrading organic substances; moreover, UV/PS treatment effectively decreased the dissolved organic nitrogen (DON) content. In contrast, UV/H2O2 treatment did not induce any noticeable reduction in DON level. Furthermore, both UV/PS and UV/H2O2 treatments reduced the dichloroacetonitrile (DCAN) formation potential (FP), leading to strong correlations with the degradation of aromatic and humic-acid-like compounds. Notably, UV/PS treatment efficiently decreased the FP of bromochloroacetonitrile (BCAN) and dramatically reduced that of dibromoacetonitrile (DBAN) after a sharp increase; however, UV/H2O2 treatment gradually increased the DBAN-FP. Bromide was activated by sulfate radicals during UV/PS treatment, negatively correlating with the BCAN-FP and DBAN-FP, indicating that the formation of reactive bromine species increased the DBAN-FP; however, excessive oxidation possibly led to the recovery of inorganic bromine for decreasing the BCAN-FP and DBAN-FP. Additionally, UV/PS treatment effectively suppressed toxicity owing to its high reduction rate for brominated HANs; in contrast, UV/H2O2 treatment resulted in less significant BCAN and DBAN reductions, leading to minimal net reduction in toxicity. Overall, UV/PS treatment was remarkably effective at diminishing the toxicity of brominated HANs, underscoring its potential to mitigate drinking-water-related health risks.

Mechanism-based cytotoxicity trend prediction of furan-containing pollutants present in a mixture.

Human exposure to furan-containing pollutants (FCPs) has raised concerns due to their high risk of toxicity. A substantial number of approximately 8500 recorded compounds containing a furan ring exist which have been analytically or in biologically studied. A significant portion of these compounds is found in the everyday environments of individuals, particularly when ingested through food. Consequently, there is a need for a universal approach to rapidly predict the potential toxicity trends of FCPs. In this study, we developed a bromine labeling-based platform that combines LC-ICP-MS and LC-ESI-MS techniques to absolutely quantify FCP-induced protein adduction. The LC-ESI-MS approach facilitated the identification of FCP-derived protein adducts and optimized liquid chromatographic conditions for analyte separation. By employing a well-designed bromine-containing compound as a general internal standard, LC-ICP-MS-based technique enabled to absolutely assess bromine-labeled protein adduction. The protein adduction efficiencies of furan, 2-methylfuran, and 2,5-dimethylfuran were found to be 2.68, 2.90, and 0.37 molecules per 10,000 FCP molecules that primary hepatocytes received, respectively. Furthermore, we observed that 2-methylfuran exhibited the highest cytotoxicity, followed by furan and 2,5-dimethylfuran, which aligned with the order of their protein adduction. Thus, the protein adduction efficiency of FCPs could serve as a potential index for predicting their toxicity trends.

Impact of Legislation on Brominated Flame Retardant Concentrations in UK Indoor and Outdoor Environments: Evidence for Declining Indoor Emissions of Some Legacy BFRs.

Concentrations of polybrominated diphenyl ethers, hexabromocyclododecane (HBCDD), and novel brominated flame retardants (NBFRs) were measured in indoor dust, indoor air, and outdoor air in Birmingham, UK. Concentrations of ΣBFRs ranged from 490 to 89,000 ng/g, 46-14,000 pg/m3, and 22-11,000 pg/m3, respectively, in UK indoor dust, indoor air, and outdoor air. BDE-209 and decabromodiphenyl ethane (DBDPE) were the main contributors. The maximum concentration of DBDPE (10,000 pg/m3) in outdoor air is the highest reported anywhere to date. In contrast with previous studies of outdoor air in Birmingham, we observed significant correlations between concentrations of tri- to hepta-BDEs and HBCDD and temperature. This may suggest that primary emissions from ongoing use of these BFRs have diminished and that secondary emissions (e.g., evaporation from soil) are now a potentially major source of these BFRs in outdoor air. Conversely, the lack of significant correlations between temperature and concentrations of BDE-209 and DBDPE may indicate that ongoing primary emissions from indoor sources remain important for these BFRs. Further research to clarify the relative importance of primary and secondary sources of BFRs to outdoor air is required. Comparison with earlier studies in Birmingham reveals significant (p < 0.05) declines in concentrations of legacy BFRs, but significant increases for NBFRs over the past decade. While there appear minimal health burdens from BFR exposure for UK adults, dust ingestion of BDE-209 may pose a significant risk for UK toddlers.

Emerging disinfection byproducts 3-bromine carbazole induces cardiac developmental toxicity via aryl hydrocarbon receptor activation in zebrafish larvae.

3-bromine carbazole (3-BCZ) represents a group of emerging aromatic disinfection byproducts (DBP) detected in drinking water; however, limited information is available regarding its potential cardiotoxicity. To assess its impacts, zebrafish embryos were exposed to 0, 0.06, 0.14, 0.29, 0.58, 1.44 or 2.88 mg/L of 3-BCZ for 120 h post fertilization (hpf). Our results revealed that ≥1.44 mg/L 3-BCZ exposure induced a higher incidence of heart malformation and an elevated pericardial area in zebrafish larvae; it also decreased the number of cardiac muscle cells and thins the walls of the ventricle and atrium while increasing cardiac output and impeding cardiac looping. Furthermore, 3-BCZ exposure also exhibited significant effects on the transcriptional levels of genes related to both cardiac development (nkx2.5, vmhc, gata4, tbx5, tbx2b, bmp4, bmp10, and bmp2b) and cardiac function (cacna1ab, cacna1da, atp2a1l, atp1b2b, atp1a3b, and tnnc1a). Notably, N-acetyl-L-cysteine, a reactive oxygen species scavenger, may alleviate the failure of cardiac looping induced by 3-BCZ but not the associated cardiac dysfunction or malformation; conversely, the aryl hydrocarbon receptor agonist CH131229 can completely eliminate the cardiotoxicity caused by 3-BCZ. This study provides new evidence for potential risks associated with ingesting 3-BCZ as well as revealing underlying mechanisms responsible for its cardiotoxic effects on zebrafish embryos.

Debromination of novel brominated flame retardants using Zn-based additives: A viable thermochemical approach in the mitigation of toxic effects during e-waste recycling.

Brominated flame retardants (BFRs) are bromine-bearing additives added to the polymeric fraction in various applications to impede fire ignition. The Stockholm Convention and various other legislations abolished legacy BFRs usage and hence, the so-called novel BFRs (NBFRs) were introduced into the market. Recent studies spotlighted their existence in household dust, aquifers and aquatic/aerial species. Co-pyrolysis of BFRs with metal oxides has emerged as a potent chemical recycling approach that produces a bromine-free stream of hydrocarbon. Herein, we investigate the debromination of two prominent two NBFRs; namely tetrabromobisphenol A 2,3-dibromopropyl ether (TD) and tetrabromobisphenol A diallyl ether (TAE) through their co-pyrolysis with zinc oxide (ZnO) and franklinite (ZnFe2O4). Most of the zinc content in electrical arc furnace dust (EAFD) exists in the form of these two metal oxides. Conversion of these metal oxides into their respective bromides could also assist in the selective extraction of the valuable zinc content in EAFD. The debromination potential of both oxides was unveiled via a multitude of characterization studies to analyze products (char, gas and condensates). The thermogravimetric analysis suggested a pyrolytic run up to 500 °C and the TAE treatment with ZnO produced only a trivial amount of brominated compounds (relative area, 0.83%). Phenol was the sole common compound in condensable products; potentially formed by the ß-scission debromination reaction from the parental molecular skeleton. Inorganic compounds and methane were the major constituents in the gaseous products. The pyrochar analyses confirmed the presence of metal bromides retained in the residue, averting the bromine release into the atmosphere. The ion chromatography analysis portrayed <8% of HBr gas release into the atmosphere upon pyrolysis with ZnO. The ZnO dominance herein envisaged further probes into other spinel ferrites in combating brominated polymers.

Br - nanoconjugate enhances the antibacterial efficacy of nimboloide against Flavobacterium columnare infection in Labeo rohita: A nanoinformatics approach.

BACKGROUND: The bacterial pathogen, Flavobacterium columnare causes columnaris disease in Labeo rohita globally. Major effects of this bacterial infection include skin rashes and gill necrosis. Nimbolide, the key ingredient of the leaf extract of Azadirachta indica possesses anti-bacterial properties effective against many microorganisms. Nano-informatics plays a promising role in drug development and its delivery against infections caused by multi-drug-resistant bacteria. Currently, studies in the disciplines of dentistry, food safety, bacteriology, mycology, virology, and parasitology are being conducted to learn more about the wide anti-virulence activity of nimbolide. METHODS: The toxicity of nimbolide was predicted to determine its dosage for treating bacterial infection in Labeo rohita. Further, comparative 3-D structure prediction and docking studies are done for nimbolide conjugated nanoparticles with several key target receptors to determine better natural ligands against columnaris disease. The nanoparticle conjugates are being designed using in-silico approaches to study molecular docking interactions with the target receptor. RESULTS: Bromine conjugated nimbolide shows the best molecular interaction with the target receptors of selected species ie L rohita. Nimbolide comes under the class III level of toxic compound so, attempts are made to reduce the dosage of the compound without compromising its efficiency. Further, bromine is also used as a common surfactant and can eliminate heavy metals from wastewater. CONCLUSION: The dosage of bromine-conjugated nimbolide can be reduced to a non-toxic level and thus the efficiency of the Nimbolide can be increased. Moreover, it can be used to synthesize nanoparticle composites which have potent antibacterial activity towards both gram-positive and gram-negative bacteria. This material also forms a good coating on the surface and kills both airborne and waterborne bacteria.

Hybrid 2D Supramolecular Organic Frameworks (SOFs) Assembled by the Cooperative Action of Hydrogen and Halogen Bonding and π⋯π Stacking Interactions.

The cis- and trans-isomers of 6-(3-(3,4-dichlorophenyl)-1,2,4-oxadiazol-5-yl)cyclohex-3-ene-1-carboxylic acid (cis-A and trans-A) were obtained by the reaction of 3,4-dichloro-N'-hydroxybenzimidamide and cis-1,2,3,6-tetrahydrophthalic anhydride. Cocrystals of cis-A with appropriate solvents (cis-A‧½(1,2-DCE), cis-A‧½(1,2-DBE), and cis-A‧½C6H14) were grown from 1,2-dichloroethane (1,2-DCE), 1,2-dibromoethane (1,2-DBE), and a n-hexane/CHCl3 mixture and then characterized by X-ray crystallography. In their structures, cis-A is self-assembled to give a hybrid 2D supramolecular organic framework (SOF) formed by the cooperative action of O-H⋯O hydrogen bonding, Cl⋯O halogen bonding, and π⋯π stacking. The self-assembled cis-A divides the space between the 2D SOF layers into infinite hollow tunnels incorporating solvent molecules. The energy contribution of each noncovalent interaction to the occurrence of the 2D SOF was verified by several theoretical approaches, including MEP and combined QTAIM and NCIplot analyses. The consideration of the theoretical data proved that hydrogen bonding (approx. -15.2 kcal/mol) is the most important interaction, followed by π⋯π stacking (approx. -11.1 kcal/mol); meanwhile, the contribution of halogen bonding (approx. -3.6 kcal/mol) is the smallest among these interactions. The structure of the isomeric compound trans-A does not exhibit a 2D SOF architecture. It is assembled by the combined action of hydrogen bonding and π⋯π stacking, without the involvement of halogen bonds. A comparison of the cis-A structures with that of trans-A indicated that halogen bonding, although it has the lowest energy in cis-A-based cocrystals, plays a significant role in the crystal design of the hybrid 2D SOF. The majority of the reported porous halogen-bonded organic frameworks were assembled via iodine and bromine-based contacts, while chlorine-based systems-which, in our case, are structure-directing-were unknown before this study.

Bromide triggers efficient peroxymonosulfate activation for phosphonate degradation.

Phosphonates have received a widespread attention in wastewater treatment due to their potential threat to the water environment. Advanced oxidation processes (AOPs) are feasible methods to degrade phosphonates, and most of the coexisting substances in water show a negative factor during their oxidation. However, the effect of bromide (Br-) on the degradation of phosphonates in peroxymonosulfate (PMS) activation is still unclear. Herein, using 1-hydroxyethane 1,1-diphosphonic acid (HEDP) as a target phosphonate, Br- could remarkably enhance the degradation of HEDP in PMS activation compared to the PMS alone. Under the condition of pH = 7.0, the optimal degradation efficiency of HEDP is 84.8% in the PMS/Br- process after 30-min reaction, whereas no significant oxidation is obtained in the PMS/I- and PMS/Cl- processes. Multiple experiments (i.e., electron paramagnetic resonance (EPR), radical quenching experiments and chemical probs) confirm that free bromine, SO4•- and HO• paly a minor role in HEDP removal, and bromine radical species make a dominant responsible for HEDP oxidation. Additionally, NO3-, SO42-, Cl-, and HCO3- have a little effect on the degradation of HEDP, but the HEDP removal is greatly inhibited in the presence of humic acid (HA). However, the degradation efficiency of HEDP using PMS/Br- process in river and sewage is a much higher than UV/persulfate (PDS) and UV/H2O2 processes. This study provides a new sight into the effect of Br- on the degradation phosphonates in PMS activation process.

Ferrate(VI) assists in reducing cytotoxicity and genotoxicity to mammalian cells and organic bromine formation in ozonated wastewater.

Ozonation of wastewater containing bromide (Br-) forms highly toxic organic bromine. The effectiveness of ozonation in mitigating wastewater toxicity is minimal. Simultaneous application of ozone (O3) (5 mg/L) and ferrate(VI) (Fe(VI)) (10 mg-Fe/L) reduced cytotoxicity and genotoxicity towards mammalian cells by 39.8% and 71.1% (pH 7.0), respectively, when the wastewater has low levels of Br-. This enhanced reduction in toxicity can be attributed to increased production of reactive iron species Fe(IV)/Fe(V) and reactive oxygen species (•OH) that possess higher oxidizing ability. When wastewater contains 2 mg/L Br-, ozonation increased cytotoxicity and genotoxicity by 168%-180% and 150%-155%, respectively, primarily due to the formation of organic bromine. However, O3/Fe(VI) significantly (p < 0.05) suppressed both total organic bromine (TOBr), BrO3-, as well as their associated toxicity. Electron donating capacity (EDC) measurement and precursor inference using Orbitrap ultra-high resolution mass spectrometry found that Fe(IV)/Fe(V) and •OH enhanced EDC removal from precursors present in wastewater, inhibiting electrophilic substitution and electrophilic addition reactions that lead to organic bromine formation. Additionally, HOBr quenched by self-decomposition-produced H2O2 from Fe(VI) also inhibits TOBr formation along with its associated toxicity. The adsorption of Fe(III) flocs resulting from Fe(VI) decomposition contributes only minimally to reducing toxicity. Compared to ozonation alone, integration of Fe(VI) with O3 offers improved safety for treating wastewater with varying concentrations of Br-.

Bromine contamination and risk management in terrestrial and aquatic ecosystems.

Bromine (Br) is widely distributed through the lithosphere and hydrosphere, and its chemistry in the environment is affected by natural processes and anthropogenic activities. While the chemistry of Br in the atmosphere has been comprehensively explored, there has never been an overview of the chemistry of Br in soil and aquatic systems. This review synthesizes current knowledge on the sources, geochemistry, health and environmental threats, remediation approaches, and regulatory guidelines pertaining to Br pollution in terrestrial and aquatic environments. Volcanic eruptions, geothermal streams, and seawater are the major natural sources of Br. In soils and sediments, Br undergoes natural cycling between organic and inorganic forms, with bromination reactions occurring both abiotically and through microbial activity. For organisms, Br is a non-essential element; it is passively taken up by plant roots in the form of the Br- anion. Elevated Br- levels can limit plant growth on coastal soils of arid and semi-arid environments. Br is used in the chemical industry to manufacture pesticides, flame retardants, pharmaceuticals, and other products. Anthropogenic sources of organobromine contaminants in the environment are primarily wastewater treatment, fumigants, and flame retardants. When aqueous Br- reacts with oxidants in water treatment plants, it can generate brominated disinfection by-products (DBPs), and exposure to DBPs is linked to adverse human health effects including increased cancer risk. Br- can be removed from aquatic systems using adsorbents, and amelioration of soils containing excess Br- can be achieved by leaching, adding various amendments, or phytoremediation. Developing cost-effective methods for Br- removal from wastewater would help address the problem of toxic brominated DBPs. Other anthropogenic organobromines, such as polybrominated diphenyl ether (PBDE) flame retardants, are persistent, toxic, and bioaccumulative, posing a challenge in environmental remediation. Future research directives for managing Br pollution sustainably in various environmental settings are suggested here.

N-aminomorpholine-functionalized bromine-doped carbon dots for hypochlorous acid detection in foods and imaging in live cells.

Hypochlorous acid (HClO) is used in food preservation. However, excessive HClO can deteriorate nutritional composition of food, compromise its quality, and potentially induce various diseases. Consequently, the development of multifunctional fluorescent probes for the sensitive and selective detection of HClO is highly anticipated for food safety. In this work, we designed a nanoprobe using N-aminomorpholine (AM)-functionalized bromine-doped carbon dots (Br-CDs-AM) for sensing HClO. This nanoprobe exhibits pH stability, strong resistance to photobleaching, superior long-term photostability (12 weeks), high sensitivity (19.3 nM), and an ultrarapid response (8 s) for detecting HClO residues in food matrices with percentage recovery (96.5 %-108 %) and RSDs less than 5.34 %. In addition, extremely low cytotoxicity and outstanding biocompatibility enable the nanoprobe to be used primarily for lysosome tracking and rapidly visualizing HClO in live cells. Thus, this study provides a new pathway to design unconventional nanoprobes for food safety assessment and subcellular organelle-specific imaging HClO.

Bromine indirubin FLIM/PLIM sensors to measure oxygen in normoxic and hypoxic PDT conditions.

BACKGROUND: The induction of phototoxicity during photodynamic therapy (PDT) is dependent on oxygen availability. For this reason, the development of sensors to measure oxygen and oxygen consumption is extremely important. APPROACH: In this project we have used Fluorescence Lifetime imaging (FLIM) and Phosphorescence Lifetime Imaging/ delayed Fluorescence Lifetime Imaging (PLIM/dFLIM) to investigate the ability of bromine indirubin derivatives as oxygen sensors. RESULTS: The oxygen sensitivity of bromine indirubins was detected through PLIM/dFLIM. Moreover, we have observed, by measuring nicotinamide adenine dinucleotide (NADH) FLIM, that bromine indirubin has a significant impact on cellular metabolism by shifting the SCC-4 Cells metabolism from oxidative phosphorylation (OXPHOS) to glycolysis. CONCLUSIONS: In conclusion, this study successfully achieves its goals and provides important insights into the use of indirubin as a potential oxygen consumption sensor with the capability to identify and differentiate between normoxic and hypoxic regions within the cells.

Characterization of halogen species in seaweeds from the Antarctic using a multi-technique approach.

BACKGROUND: Despite the recognized importance, the determination of halogens in Antarctic seaweeds remains understudied. Limited research exists due to challenges associated with sample preparation, and reliable analytical techniques for this type of analysis. Therefore, further investigations are necessary to bridge this knowledge gap and gain a comprehensive understanding of halogen metabolism in Antarctic seaweeds. METHODS: In this study, seaweeds from the coast of the Antarctic continent were characterized concerning the total content of halogens and their species. For this purpose, different sample preparation methods, based on extraction and combustion, combining highly selective and sensitive chromatographic and spectrometric multi-technique approaches were used. RESULTS: By using optimized methods, it was possible to determine total halogens content, the distribution of bromine and iodine in different classes of species (lipids, water-soluble, proteins, carbohydrates, and residue), as well as the identification of iodinated amino acids (MIT and DIT) in ten brown and red seaweeds. Bromate and iodate were not detected in the samples, which presented only bromide and iodide species in their composition. Additionally, unknown bromine and iodine species were observed in different extracts evaluated. Furthermore, 25 halogenated polyphenols were identified in seaweeds, of which only four were already reported in the literature. CONCLUSION: The results obtained in this study comprise unprecedented data in the literature on species of halogens present in seaweeds from the Antarctic environment.

Bromine Substitution Improves the Photothermal Performance of π-Conjugated Phototheranostic Molecules.

NIR-II fluorescence imaging-guided photothermal therapy (PTT) has been widely investigated due to its great application potential in tumor theranostics. PTT is an effective and non-invasive tumor treatment method that can adapt to tumor hypoxia; nevertheless, simple and effective strategies are still desired to develop new materials with excellent PTT properties to meet clinical requirements. In this work, we developed a bromine-substitution strategy to enhance the PTT of A-D-A'-D-A π-conjugated molecules. The experimental results reveal that bromine substitution can notably enhance the absorptivity (ϵ) and photothermal conversion efficiency (PCE) of the π-conjugated molecules, resulting in the brominated molecules generating two times more heat (ϵ808 nm ×PCE) than their unsubstituted counterpart. We disclose that the enhanced photothermal properties of bromine-substituted π-conjugated molecules are a combined outcome of the heavy-atom effect, enhanced ICT effect, and more intense bromine-mediate intermolecular π-π stacking. Finally, the NIR-II tumor imaging capability and efficient PTT tumor ablation of the brominated π-conjugated materials demonstrate that bromine substitution is a promising strategy for developing future high-performance NIR-II imaging-guided PTT agents.

A probabilistic approach to compare the risk associated with heavy metals and bromine in honey from Dominican Republic, Mexico, Mozambique and Spain.

This study aims to analyse the risk to consumers given the presence of heavy metals and bromine in honey from different countries. A probabilistic approach was applied to assess carcinogenic risk. Concerning exposure, Al in Spain (3.3E-04 mg/kgBw/day), B in Dominican Republic and Mexico (2E-04 mg/kgBw/day in both cases) and Fe in Mexico and Mozambique had the highest values (5E-05 and 4.8E-05 mg/kgBw/day). In risk characterisation, the values were less than 1 for hazard index (HI), meaning that the consumption of honey represents a low level of concern for non-genotoxic effects. A combination of margin of exposure and probability of exceedance results that exposure to Pb pose no threat. The probability of suffering cancer for Br, Cd, Ni and Pb was lower than 1.0E-06 and, therefore, considered safe. However, the risk at the 95th percentile of Br in Dominican Republic was 1.18E-04 in adults and 2.45E-04 in children, exceeding 1.0E-04, and therefore, considered intolerable. Finally, the sensitivity analysis indicated that the most influential factor in the HI was the consumption in adults and the concentration of Ni in children, whereas for cancer risk, were the concentrations of Ni, Cd, Br and Pb, in both cases.

Comparing different methods for olefin quantification in pygas and plastic pyrolysis oils: Gas chromatography-vacuum ultraviolet detection versus comprehensive gas chromatography versus bromine number titration.

In steam cracking, upstream pyrolysis oil hydroprocessing, and in many downstream processes, olefinic content is key to assess process performance and process safety risk associated with highly exothermic reactions. When looking to plastic pyrolysis oils as a potential feedstock, as well as downstream products such as pyrolysis gasoline (pygas), these materials contain unsaturated hydrocarbons which are not present in fossil feedstocks. Pygas is a product of pyrolysis and exhibits a large number of chemical structural similarities with plastic pyrolysis oils, especially in terms of olefins structure. Quantification of the unsaturation content (olefins and di-olefins) is extremely important in industry, hence the focus of this manuscript. Detailed hydrocarbon analysis with flame ionization detection is inadequate to fully characterize the hydrocarbon composition of such samples, especially when peaks are closely eluting, or even co-eluting. In this study, the gas chromatography coupled to vacuum ultraviolet (GC-VUV) detection method previously described for the analysis of liquid hydrocarbon streams1 and plastic pyrolysis oils2 has been compared with comprehensive gas chromatography (GC × GC) and the industry standard for olefin quantification (i.e., bromine number titration). Although based on different methodologies, a correlation between the olefin content obtained from GC-VUV and the bromine number titration method is hereby presented.

Comparative formation of chlorinated and brominated disinfection byproducts from chlorination and bromination of amino acids.

Amino acids are the main components of dissolved organic nitrogen in algal- and wastewater-impacted waters, which can react with chlorine to form toxic halogenated disinfection by-products (DBPs) in the disinfection process. In the presence of bromide, the reaction between amino acids and secondarily formed hypobromous acid can lead to the formation of brominated DBPs that are more toxic than chlorinated analogues. This study compares the formation of regulated and unregulated DBPs during chlorination and bromination of representative amino acids (AAs) (e.g., aspartic acid, asparagine, tryptophan, tyrosine, and histidine). In general, concentrations of brominated DBPs (trihalomethanes, haloacetonitriles, and haloacetamides, 24.9-5835.0 nM) during bromination were higher than their chlorinated analogues (9.3-3235.3 nM) during chlorination. This indicates the greater efficacy of bromine as a halogenating agent. However, the formation of chlorinated haloacetic acids during chlorination was higher than the corresponding brominated DBPs from bromination. It is likely that an oxidation pathway is required for the formation of haloacetic acids and chlorine is a stronger oxidant than bromine. Moreover, chlorine forms higher levels of haloacetaldehydes (74.4-1077.8 nM) from amino acids than bromine (1.0-480.2 nM) owing to the instability of brominated species. The DBP formation yields depend on the types of functional groups in the side chain of AAs. Eight intermediates resulting from chlorination/bromination of tyrosine were identified by triple quadrupole mass spectrometer, including N-chlorinated/brominated tyrosine, 3-chloro/bromo-tyrosine, and 3,5-dichloro/dibromo-tyrosine. These findings provided new insights into the DBP formation during the chlorination of algal- and wastewater-impacted waters with elevated bromide.

Comprehensive Assessment of Reactive Bromine Species in Advanced Oxidation Processes: Differential Roles in Micropollutant Abatement in Bromide-Containing Water.

Reactive bromine species (RBS) are gaining increasing attention in natural and engineered aqueous systems containing bromide ions (Br-). However, their roles in the degradation of structurally diverse micropollutants by advanced oxidation processes (AOPs) were not differentiated. In this study, the second-order rate constants (k) of Br•, Br2•-, BrO•, and ClBr•- were collected and evaluated. Br• is the most reactive RBS toward 21 examined micropollutants with k values of 108-1010 M-1 s-1. Br2•-, ClBr•-, and BrO• are selective for electron-rich micropollutants with k values of 106-108 M-1 s-1. The specific roles of RBS in aqueous micropollutant degradation in AOPs were revealed by using simplified models via sensitivity analysis. Generally, RBS play minimal roles in the UV/H2O2 process but are significant in the UV/peroxydisulfate (PDS) and UV/chlorine processes in the presence of trace Br-. In UV/PDS with ≥1 µM Br-, Br• emerges as the major RBS for removing electron-rich micropollutants. In UV/chlorine, BrO• contributes to the degradation of specific electron-rich micropollutants with removal percentages of ≥20% at 1 µM Br-, while the contributions of BrO• and Br• are comparable to those of reactive chlorine species as Br- concentration increases to several µM. In all AOPs, Br2•- and ClBr•- play minor roles at 1-10 µM Br-. Water matrix components such as HCO3-, Cl-, and natural organic matter (NOM) significantly inhibit Br•, while BrO• is less affected, only slightly scavenged by NOM with a k value of 2.1 (mgC/L)-1 s-1. This study sheds light on the differential roles of multiple RBS in micropollutant abatement by AOPs in Br--containing water.