Analyzing global research trends and focal points in the utilization of laser techniques for the treatment of urolithiasis from 1978 to 2022: visualization and bibliometric analysis.

Laser lithotripsy is gaining global prominence and is a dynamically progressing field marked by a continual influx of new and comprehensive research each year. Recently, there has been a noticeable shift toward the adoption of various kinds of lasers, such as holmium: yttrium-aluminum-garnet (Ho:YAG) and thulium fiber (TFL) lasers. Consequently, we aim to conduct a bibliometric analysis to analyze key areas of research activity within scientific publications that center on the utilization of laser techniques in urolithiasis. A search of the literature spanning from 1978 to 2022 was carried out on 25 December 2023 using the Scopus database to explore research related to the application of laser techniques for urolithiasis treatment. Visualization analysis was performed using VOSviewer software (version 1.6.20). We examined 962 publications that met the specified criteria, 791 (82.22%) of which were original articles. The analysis of the retrieved publications indicated a consistent increase in research output from 1978 to 2022; a particularly noteworthy surge occurred after 2003. In particular, the U.S. claimed the leading position as the most productive country, contributing 211 articles (21.93%). However, India had the highest research productivity according to the adjustment index of 19.08. In the European region, 324 publications (33.68% of the total) originated from 25 countries. The Journal of Endourology contributed the most between 1978 and 2022 (n = 96, 9.98%). The most cited paper examined the effectiveness of holmium: yttrium-aluminum-garnet (Ho:YAG) lasers, while a subsequent study focused on the use of a thulium fiber laser (TFL), an emerging laser technology that has gained increased recognition. Co-occurrence analysis revealed three distinct clusters focusing on the types of laser technology, minimally invasive approaches, and success rate/postoperative complications. This comprehensive investigation delves into the global landscape of laser use for the treatment of urolithiasis. This review supports the emerging clinical concept of using various types of laser technology for urolithiasis treatment. Moreover, the hot issues that researchers should focus on based on the findings of this study are the use of different types of laser lithotripsy in view of the surgical approach, success rate and complications.

Identification of MATE Family and Characterization of GmMATE13 and GmMATE75 in Soybean's Response to Aluminum Stress.

The multidrug and toxic compound extrusion (MATE) proteins are coding by a secondary transporter gene family, and have been identified to participate in the modulation of organic acid exudation for aluminum (Al) resistance. The soybean variety Glycine max "Tamba" (TBS) exhibits high Al tolerance. The expression patterns of MATE genes in response to Al stress in TBS and their specific functions in the context of Al stress remain elusive. In this study, 124 MATE genes were identified from the soybean genome. The RNA-Seq results revealed significant upregulation of GmMATE13 and GmMATE75 in TBS upon exposure to high-dose Al3+ treatment and both genes demonstrated sequence homology to citrate transporters of other plants. Subcellular localization showed that both proteins were located in the cell membrane. Transgenic complementation experiments of Arabidopsis mutants, atmate, with GmMATE13 or GmMATE75 genes enhanced the Al tolerance of the plant due to citrate secretion. Taken together, this study identified GmMATE13 and GmMATE75 as citrate transporter genes in TBS, which could improve citrate secretion and enhance Al tolerance. Our findings provide genetic resources for the development of plant varieties that are resistant to Al toxicity.

Genome-Wide Identification, Expression Analysis under Abiotic Stress and Co-Expression Analysis of MATE Gene Family in Torreya grandis.

The multidrug and toxin efflux (MATE) family participates in numerous biological processes and plays important roles in abiotic stress responses. However, information about the MATE family genes in Torreya grandis remains unclear. In this study, our genome-wide investigation identified ninety MATE genes in Torreya grandis, which were divided into five evolutionary clades. TgMATE family members are located on eleven chromosomes, and a total of thirty TgMATEs exist in tandem duplication. The promoter analysis showed that most TgMATEs contain the cis-regulatory elements associated with stress and hormonal responses. In addition, we discovered that most TgMATE genes responded to abiotic stresses (aluminum, drought, high temperatures, and low temperatures). Weighted correlation network analysis showed that 147 candidate transcription factor genes regulated the expression of 14 TgMATE genes, and it was verified through a double-luciferase assay. Overall, our findings offer valuable information for the characterization of the TgMATE gene mechanism in responding to abiotic stress and exhibit promising prospects for the stress tolerance breeding of Torreya grandis.

Comparing Aluminum Concentrations in Adult and Pediatric Parenteral Nutrition Solutions: Multichamber-Bag versus Compounded Parenteral Nutrition.

Aluminum contamination in parenteral nutrition (PN) solutions can lead to neurotoxicity, reduced bone mass, and liver toxicity, especially in pediatric patients. Ingredients commonly used in PN compounding, such as vitamins, trace elements, calcium, and phosphate salts, contain significant amounts of aluminum. This study aimed to compare aluminum concentrations in multichamber-bag (MCB) and compounded PN for adults and pediatrics. A prospective study assessed aluminum concentrations in various types of MCB and compared them with compounded PN formulations with similar compositions. The types of MCB included Lipoflex® (without electrolytes), Omegaflex®, Finomel®, Smofkabiven® (with and without electrolytes), Olimel®, Clinimix®, and Numeta®. Overall, 80 aluminum determinations were included: 36 for MCBs and 44 for compounded PN. MCBs showed significantly lower aluminum concentrations than compounded PN: 11.37 (SD 6.16) vs. 21.45 (8.08) µg/L, respectively. Similar results were observed for adult (n = 40) and pediatric (n = 40) PN formulations (12.97 (7.74) vs. 20.78 (10.28) µg/L, and 9.38 (2.23) vs. 22.01 (5.82) µg/L, respectively). Significant differences were also found between MCBs depending on the manufacturing company. These findings suggest that MCBs PN offer a safer option for reducing aluminum contamination in PN. Harmonizing regulations concerning aluminum concentrations in PN solutions could help mitigate differences between PN formulations.

Aberrant occlusal sensitivity in adults with increased somatosensory amplification: a case-control study.

OBJECTIVES: Occlusal sensitivity (OS)-the ability to detect fine objects between opposing teeth-mainly relies on the activity of mechanoreceptors located in the periodontal ligament. We tested whether somatosensory amplification (SSA)-the tendency to perceive normal somatic sensations as being intense, noxious, and disturbing, which plays a critical role in hypervigilance-affects OS. MATERIALS AND METHODS: We measured OS in 66 adults divided into three groups based on their SSA scores (LowSSA, Intermediate - IntSSA, HighSSA) by asking them to bite on aluminum foils (8 to 72 µm thick) and a sham foil, and report whether they felt each foil. We performed 20 trials for each thickness and sham condition (each participant was tested 120 times), and compared the frequency of correct answers (%correct) among groups after adjusting for participants' trait anxiety, depression, self-reported oral behaviors, and masseter cross-sectional area. RESULTS: %correct was affected by the interaction Foil Thickness-by-SSA (p = 0.007). When tested with the 8 µm foil, the HighSSA group had a lower %correct than the IntSSA (contrast estimate [95% CI]: -14.2 [-25.8 - -2.6]; p = 0.012) and the LowSSA groups (-19.1 [-31.5 - -6.6]; p = 0.001). Similarly, with the 24 µm foil, the HighSSA group had a lower %correct compared to the IntSSA (-12.4 [-24.8-0.1]; p = 0.048) and the LowSSA groups (-10.8 [-22.5-0.8]; p = 0.073). CONCLUSION: Individuals with high SSA present with an aberrant occlusal sensitivity. CLINICAL RELEVANCE: Our findings provide novel insights into the relationship between occlusal perception and psychological factors, which may influence an individual's ability to adapt to dental work.

[Determination of 24 elements migration in Yixing clay pottery by inductively coupled plasma mass spectrometry].

OBJECTIVE: To establish an analytical method for determining the migration of 24 elements in Yixing clay pottery in 4% acetic acid simulated solution by inductively coupled plasma mass spectrometry. METHODS: Four types of Yixing clay pottery, including Yixing clay teapot, Yixing clay kettle, Yixing clay pot, and Yixing clay electric stew pot, were immersed in 4% acetic acid as a food simulant for testing. The migration amount of 24 elements in the migration solution was determined using inductively coupled plasma mass spectrometry. RESULTS: Lithium, magnesium, aluminum, iron, and barium elements with a mass concentration of 1000 µg/L; Lead, cadmium, total arsenic, chromium, nickel, copper, vanadium, manganese, antimony, tin, zinc, cobalt, molybdenum, silver, beryllium, thallium, titanium, and strontium elements within 100 µg/L there was a linear relationship within, the r value was between 0.998 739 and 0.999 989. Total mercury at 5.0 µg/L, there was a linear relationship within, the r value of 0.995 056. The detection limit of the elements measured by this method was between 0.5 and 45.0 µg/L, the recovery rate was 80.6%-108.9%, and the relative standard deviation was 1.0%-4.8%(n=6). A total of 32 samples of four types of Yixing clay pottery sold on the market, including teapots, boiling kettles, casseroles, and electric stewing pots, were tested. It was found that the migration of 16 elements, including beryllium, titanium, chromium, nickel, cobalt, zinc, silver, cadmium, antimony, total mercury, thallium, tin, copper, total arsenic, molybdenum, and lead, were lower than the quantitative limit. The element with the highest migration volume teapot was aluminum, magnesium, and barium; The kettle was aluminum and magnesium; Casserole was aluminum, magnesium, and lithium; The electric stew pot was aluminum. CONCLUSION: This method is easy to operate and has high accuracy, providing an effective and feasible detection method for the determination and evaluation of element migration in Yixing clay pottery.

Comparison of the shear bond strengths of two different polyetheretherketone (PEEK) framework materials and CAD-CAM veneer materials.

BACKGROUND: This study evaluated the shear bond strength (SBS) of two different polyetheretherketone (PEEK) and CAD-CAM materials after aging. METHODS: A total of 42 frameworks were designed and milled from 2 different PEEK discs (Copra Peek, P and BioHPP, B). P and B frameworks were divided into 3 subgroups (n = 7). 14 slices were prepared each from feldspathic ceramic (Vitablocs Mark II, VM), hybrid nanoceramic (Cerasmart, CS), and polymer-infiltrated ceramic (Vita Enamic, VE) blocks. After surface preparations, the slices were cemented to P and B surfaces. The samples were subjected to thermal aging (5000 cycles). SBS of all the samples was measured. Fractured surfaces were examined by SEM/EDX analysis. The Shapiro-Wilk, Two-way Robust ANOVA and Bonferroni correction tests were used to analyze the data (a = .05). RESULTS: Frameworks, ceramics, and frameworks x ceramics had significant differences (p < 0.05). The highest SBS value was seen in B-VM (p < 0.05). VM offered the highest SBS with both P and B. The differences between P-VM, P-CS, P-VE and B-CS and B-VE were insignificant (p > 0.05). According to EDX analysis, ytterbium and fluorine was seen in B content, unlike P. While VM and CS contained fluorine, barium, and aluminum; sodium and aluminum were observed in the VE structure. CONCLUSION: Bonding of P and B with VM offers higher SBS. VM, CS and VE did not make any difference in SBS for P, however VM showed a significant difference for B.

Treatment of tomato paste wastewater by electrochemical and membrane processes: process optimization and cost calculation.

This study investigated the treatment of wastewater from tomato paste (TP) production using electrocoagulation (EC) and electrooxidation (EO). The effectiveness of water recovery from the pretreated water was then investigated using the membrane process. For this purpose, the effects of independent control variables, including electrode type (aluminum, iron, graphite, and stainless steel), current density (25-75 A/m2), and electrolysis time (15-120 min) on chemical oxygen demand (COD) and color removal were investigated. The results showed that 81.0% of COD and 100% of the color removal were achieved by EC at a current density of 75 A/m2, a pH of 6.84 and a reaction time of 120 min aluminum electrodes. In comparison, EO with graphite electrodes achieved 55.6% of COD and 100% of the color removal under similar conditions. The operating cost was calculated to be in the range of $0.56-30.62/m3. Overall, the results indicate that EO with graphite electrodes is a promising pretreatment process for the removal of various organics. In the membrane process, NP030, NP010, and NF90 membranes were used at a volume of 250 mL and 5 bar. A significant COD removal rate of 94% was achieved with the membrane. The combination of EC and the membrane process demonstrated the feasibility of water recovery from TP wastewater.

An energy efficiency assessment of Yttrium-aluminum-garnet laser in vitro.

To study the effect range of the Nd:YAG laser through various levels of cloudy medium for targets with varying grayscale values in vitro. The coated paper cards with grayscale values of 0, 50, 100, and 150 were used as the laser's targets, which were struck straightly with varying energies using three burst modes (single pulse, double pulse, and triple pulse). Six filters (transmittances of 40, 50, 60, 70, 80, and 90) were applied to simulate various levels of cloudy refractive medium. Image J software was used to measure the diameters and regions of the laser spots. The ranges of the Nd:YAG laser spots increased with energy in the same burst mode (P < 0.05). Under the same amount of energy, the ranges of the Nd:YAG laser spot increased with the grayscale value of the targets (P < 0.05). The greater the transmittance of the filters employed, the larger the range of the Nd: YAG laser spots produced. Assuming that the total pulse energy is identical, the effect ranges of multi-pulse burst modes were significantly larger than those of single-pulse burst mode (P < 0.05). The effect range of a Nd:YAG laser grows with increasing energy and the target's grayscale value. A cloudy refractive medium has a negative impact on the effect range of the Nd: YAG laser. The single pulse mode has the narrowest and safest efficiency range.

Portable tri-color ratiometric fluorescence paper sensor for intelligent visual detection of dual-antibiotics and aluminium ion.

The toxicological effect between co-existed antibiotics and metal ions was dangerous to the ecological environment and public health. However, the rapid quantification tools with convenience, accuracy and low cost for the detection of multiple targets were still challenging. Herein, a portable tri-color ratiometric fluorescence paper sensor was constructed by coupling of blue carbon dots and fluorescence imprinted polymer for down/up conversion simultaneous detection of tetracycline and sulfamethazine. Interestingly, the cascade detection of aluminum ion was also realized based on the individual detection system of tetracycline without the assistance of complex coupling reagents. The detection limits of smartphone method for the visual detection of tetracycline, sulfamethazine and aluminum ion were calculated as 0.014 µM, 0.004 µM and 0.019 µM, respectively. The portable fluorescence paper sensor was applied for the visual detection of tetracycline, sulfamethazine and aluminum ion in actual samples successfully with satisfactory recoveries. With the advantages of rapidness, low cost, and portability, the developed portable fluorescence paper sensor provided a new strategy for the visual real-time detection of multiple targets.

Degradation of the neonicotinoid pesticide imidacloprid by electrocoagulation and ultrasound.

Imidacloprid is still a widely used neonicotinoid insecticide that is banned in many countries because of the associated environmental risks. Due to the inefficiency of conventional wastewater treatments for pesticide removal, new treatment methods are being investigated. Electrochemical methods, including electrocoagulation (EC), seem to be promising alternatives considering their effectiveness in removing various pollutants from wastewater. The aim of this study was to investigate the effects of electrode material, current density, ultrasound, and operation time on the efficiency of imidacloprid removal from a model solution by EC. The combination of aluminum electrodes and 20 A of applied current for 20 min resulted in total imidacloprid degradation. A simplified energy balance was introduced as a form of process evaluation. Combining ultrasound with EC resulted in 7% to 12% greater efficacy than using only EC.

[Treatment of early capsular blockage syndrome with Nd:YAG laser anterior capsulotomy containing neodymium-doped yttrium aluminum garnet in a case].

A 62-year-old female patient presented with no improvement in vision 10 days after undergoing cataract extraction in the right eye. The unaided visual acuity in the right eye was 0.1, and examination with a slit lamp revealed the presence of the intraocular lens with an increased gap between the intraocular lens and the posterior capsule. Anterior segment optical coherence tomography showed a distance of 3.236 mm between the posterior capsule and the posterior surface of the intraocular lens. Based on the medical history, ocular examination, and auxiliary examinations, a diagnosis of right eye capsular blockage syndrome was made. Nd:YAG laser capsulotomy was performed at the anterior capsule outside the optical zone of the intraocular lens. One week later, the posterior capsule adhered to the posterior surface of the intraocular lens, and there was a significant improvement in vision compared to before the procedure.

Recovery of aluminum from plastic packages containing aluminum by gasification.

The standing pouch, a packaging material made of multiple layers of plastic and metal, presents a significant challenge for full recycling. Gasification shows promise as a method to recover aluminum from this type of waste and convert it into energy. This study aims to evaluate the efficiency of gasification in treating aluminum-containing plastic packages, and recovering aluminum while identifying the optimal combinations of temperature and equivalence ratio (ER) to achieve the best outcomes. The study achieved a conversion rate of 43.06 wt% to 69.42 wt% of the original waste mass into syngas, with aluminum recovery rates ranging from 35.2 % to 65.3 %. Temperature and ER alterations affected the product distribution, aluminum recovery rate, and aluminum partitioning in the products. The results indicated that the combination of 700 °C, ER = 0.4 would provide the largest amount of syngas about 69.42 %, which is the main product of the gasification process, and therefore, this combination is the most optimal for syngas-yielding purposes. Under the reclaiming aluminum is more prioritized, the combination of 800 °C, ER = 0.6 would be the most optimal condition, the majority of Al in fuel was found in char and fly ash were 67.5 % and 4.81 %, respectively. The study focused on the partitioning of aluminum during the gasification process, which was observed to mainly exist in the form of Al2O3(s), with gaseous species including AlCl3(g), AlH(g), and Al2O(g) due to their medium volatility. As the ER increased, the amount of O2 also increased, leading to more Al2O3(s) formation. In conclusion, this research provides a foundation for further exploration of gasification as a means of energy conversion and metal recovery.

Facile One-Pot Synthesis and Anti-Microbial Activity of Novel 1,4-Dihydropyridine Derivatives in Aqueous Micellar Solution under Microwave Irradiation.

The current study describes a novel and eco-conscious method to synthesize 1,4-dihydropyridine derivatives utilizing an aqueous micellar solution containing aluminum dodecyl sulfate, Al(DS)3, using readily available starting material. The final products were synthesized with excellent yields within remarkably quick reaction durations, promoting remarkable atom economy and minimizing environmental impacts. The present protocol has several advantages over other methodologies in terms of high yield (up to 97%) with excellent purity. Further, the synthesized 1,4-DHPs exhibit favorable to excellent resistance against examined bacterial and fungal species. Intriguingly, polar groups on the phenyl ring (5b, 5c, 5i and 5j) make the 1,4-DHPs equally potent against the microbes as compared to the standard drugs.

Electrocoagulation in treatment of municipal wastewater- life cycle impact assessment.

The purpose of this study is investigation of electrocoagulation (EC) as a treatment of municipal wastewater, integrating life cycle impact assessment (LCIA) for assessing its environmental performance of investigated treatment. The study evaluated the effectiveness of EC in removing physico-chemical and microbial parameters using aluminum (Al) and iron (Fe) electrodes in monopolar and bipolar modes. Bipolar arrangement of Al(-)/Al/Al/Al(+) electrodes achieved the highest removals: 70% COD, 72% BOD5 followed by complete elimination of total phosphorous, turbidity and microbial parameters. This treatment was subject to investigation of the influence of reaction time (t = 10-60 min) on removals at higher current density (CD = 3.33 mA/cm2). In order to reduce energy consumption, the same reaction time range was used with a reduced CD = 2.33 mA/cm2. Following removal efficiencies obtained: 47-72% COD (higher CD) and 53-78% (lower CD); 69-75% BOD5 (higher CD) and 55-74% CD (lower CD); 12-21% NH4- (higher CD) and 7-22% NH4- (lower CD). Total P, NO3- and NO2- compounds showed the same removals regardless the CD. Decrease in current density did not influence removals of total suspended matter, turbidity, salinity as well as microbial parameters. The bipolar arrangement of Al(-)/Al/Al/Al(+) electrodes, assuming a lower CD = 2.33 mA/cm2 and t = 30 min, was assessed with the Recipe 2016Midpoint (H) and USEtox v.2 LCIA methods to explore the environmental justification of using EC for wastewater treatment. The LCIA results revealed that the EC process significantly reduces water eutrophication and toxicity for freshwater and marine ecosystems, but has higher impacts in global warming, fossil fuel consumption, human toxicity, acidification, and terrestrial ecotoxicity due to high energy consumption. This can be mainly explained by the assumption in the study that the EC precipitate is dispersed to agricultural soil without any pre-treatment and material recovery, along with relatively high energy consumption during the process.

Cone-beam computed tomography (CBCT) dose optimization technique and image quality assessment scoring.

INTRODUCTION: Linear accelerator (LINAC) embedded with kV source-imager system is capable to do image-guided radiotherapy. The only disadvantage of cone-beam computed tomography image acquisition during treatment is the extra radiation dose to the patient. The aim of this study is to optimize the CBCT imaging doses likely to be received by the patient undergoing radiotherapy without affecting image quality. MATERIAL AND METHODS: The imaging dose to the patient was estimated on CTDI phantoms. The effect of additional filters of different materials (copper, brass, aluminum of thickness 0.1 mm each) was evaluated to find the optimized dose imaging technique. For the pelvis, a single imaging protocol available on the machine was used, whereas for the head and neck region, two protocols, high-quality head and standard-dose head were used. The image quality was assessed on CATPHAN-504 phantom using Owl CATPHAN® QA online tool. A new term "Image Assessment score" (IAS) was introduced to evaluate the image quality. RESULT: In the pelvis protocol, CBCT imaging doses with an additional 0.1-mm brass, copper, and aluminum filter were measured to be reduced by 7.1%, 4.7%, and 2.5%, respectively, whereas for high-quality head protocol, the dose reduction was 25.4% (with brass filter), 22% (with copper filter), and 3.1% (with aluminum filter). For the standard-dose head protocol, doses were reduced by 7.5%, 2.8%, and 2.1% with additional 0.1-mm brass copper and aluminum filters, respectively. Acceptable image quality was observed with all the filters. CONCLUSION: Although the reconstructed images were found somewhat noisier, they did not affect the purpose of imaging, that is, treatment position verification. It was observed that these extra filters further reduce the imaging dose without much affecting the image quality.

Characterization of SgALMT genes reveals the function of SgALMT2 in conferring aluminum tolerance in Stylosanthes guianensis through the mediation of malate exudation.

Aluminum (Al) toxicity is the major constraint on plant growth and productivity in acidic soils. An adaptive mechanism to enhance Al tolerance in plants is mediated malate exudation from roots through the involvement of ALMT (Al-activated malate transporter) channels. The underlying Al tolerance mechanisms of stylo (Stylosanthes guianensis), an important tropical legume that exhibits superior Al tolerance, remain largely unknown, and knowledge of the potential contribution of ALMT genes to Al detoxification in stylo is limited. In this study, stylo root growth was inhibited by Al toxicity, accompanied by increases in malate and citrate exudation from roots. A total of 11 ALMT genes were subsequently identified in the stylo genome and named SgALMT1 to SgALMT11. Diverse responses to metal stresses were observed for these SgALMT genes in stylo roots. Among them, the expressions of 6 out of the 11 SgALMTs were upregulated by Al toxicity. SgALMT2, a root-specific and Al-activated gene, was selected for functional characterization. Subcellular localization analysis revealed that the SgALMT2 protein is localized to the plasma membrane. The function of SgALMT2 in mediating malate release was confirmed by analysis of the malate exudation rate from transgenic composite stylo plants overexpressing SgALMT2. Furthermore, overexpression of SgALMT2 led to increased root growth in transgenic stylo plants treated with Al through decreased Al accumulation in roots. Taken together, the results of this study suggest that malate secretion mediated by SgALMT2 contributes to the ability of stylo to cope with Al toxicity.

Association between the Composition of Drinking Water and Cognitive Function in the Elderly: A Systematic Review.

The prevalence of dementia increases with nearly 10 million new cases each year, with Alzheimer's disease contributing to 60-70% of cases. Environmental factors such as drinking water have been evaluated to determine if a relationship exists between trace elements in drinking water and the risk of developing cognitive disorders in the elderly. The purpose of the current systematic review was to evaluate an association between the composition of drinking water and cognitive function in the elderly. In accordance with the Preferred Reporting Items for Systematic Review and Meta-Analyses guidelines, a literature search was conducted using PubMed and CINAHL databases. A total of 10 studies were included in the current systematic review. Aluminum is the most commonly evaluated trace element in studies (n = 8), followed by silica (n = 5), calcium (n = 4), and fluoride (n = 4). Aluminum exposure showed an increased risk of cognitive decline in four studies, with no association reported in the other studies. Higher silica and pH levels were shown to be protective against a decline in cognitive function. A similar protective effect of calcium was found in two studies. Future research should measure multiple trace mineral levels in all water sources to evaluate the impact on cognitive function.