Isosorbide, a versatile green chemical: Elucidating its ADME properties for safe use.

Isosorbide, an environmentally friendly and renewable substance, finds extensive application in diverse fields, such as a bisphenol A substitute, polymers, functional materials, organic solvents, fuels, and pharmaceuticals. Despite its increasing interest and widespread usage, there remains a notable absence of available reports regarding its absorption, distribution, metabolism, and excretion (ADME) properties. This study endeavors to investigate the ADME characteristics of isosorbide in rats. Isosorbide levels in biological samples were quantified based on the analytical method using gas chromatography-mass spectrometry (GC-MS). Following administration, isosorbide exhibited rapid absorption and elimination, with a bioavailability of 96.1%. The metabolic stability assay indicated that isosorbide remained stable during metabolism. The majority of absorbed isosorbide was promptly excreted, with urinary excretion as the primary route. This study furnishes valuable insights into the ADME of isosorbide, contributing to its safety assessment and fostering its continued application across various domains.

Relationship between Composition and Environmental Degradation of Poly(isosorbide-co-diol oxalate) (PISOX) Copolyesters.

To reduce the global CO2 footprint of plastics, bio- and CO2-based feedstock are considered the most important design features for plastics. Oxalic acid from CO2 and isosorbide from biomass are interesting rigid building blocks for high Tg polyesters. The biodegradability of a family of novel fully renewable (bio- and CO2-based) poly(isosorbide-co-diol) oxalate (PISOX-diol) copolyesters was studied. We systematically investigated the effects of the composition on biodegradation at ambient temperature in soil for PISOX (co)polyesters. Results show that the lag phase of PISOX (co)polyester biodegradation varies from 0 to 7 weeks. All (co)polyesters undergo over 80% mineralization within 180 days (faster than the cellulose reference) except one composition with the cyclic codiol 1,4-cyclohexanedimethanol (CHDM). Their relatively fast degradability is independent of the type of noncyclic codiol and results from facile nonenzymatic hydrolysis of oxalate ester bonds (especially oxalate isosorbide bonds), which mostly hydrolyzed completely within 180 days. On the other hand, partially replacing oxalate with terephthalate units enhances the polymer's resistance to hydrolysis and its biodegradability in soil. Our study demonstrates the potential for tuning PISOX copolyester structures to design biodegradable plastics with improved thermal, mechanical, and barrier properties.

Fully bio-based and intrinsically flame retardant unsaturated polyester cross-linked with isosorbide-based diluents.

Unsaturated polyester resins (UPR) are composed of prepolymers and styrene diluents, while the former are produced by co-polycondensation between diol, unsaturated diacid and saturated diacid. In this work, bio-based UPR prepolymers were synthesized from bio-based oxalic acid, itaconic acid, and ethylene glycol, which were then diluted with bio-based isosorbide methacrylate (MI). Meanwhile, the phenylphosphonate were introduced into the molecular chains of prepolymers to achieve intrinsic flame retardancy of bio-based UPR. The potential of the reactive MI diluents as substitutes of volatile styrene, was also assessed through the volatility test, curing kinetics and gel contents analysis. For UPR materials with styrene diluents, the UPR materials can achieve UL-94 V0 level and the 28% of limiting oxygen index (LOI) with 2.63 wt% of phosphorus contents. By contrast, the UPR materials with MI diluents can reach UL-94 V0 level with only 2.14 wt% of phosphorus contents. As the phosphorus contents were further increased to 2.63 wt%, UPR materials can achieve highest 29%, while the peak of heat release rate (PHRR) and total heat release (THR) were decreased by 68.01% and 48.62%, respectively. The Flame Retardancy Index (FRI) was also used to comprehensively evaluate the flame retardant performance of UPR composites. Compared with neat UPR, the composites with MI diluents and phosphorus containing structures increased from 1.00 to 6.46. The mechanism for improved flame retardancy was analyzed from gaseous and condensed phase. Additionally, the tensile strengths of bio-based UPR materials with styrene and MI diluents were studied. This work provides an effective method to prepared high-performance and fully bio-based UPR materials with improved flame retardant properties and safety application of reactive diluents.

A study on the applicability of one-step vortex extraction and purification combined with gas chromatography-tandem mass spectrometry for analysis of four skin penetration enhancers in cosmetics.

Based on one-step vortex extraction and purification combined with gas chromatography-tandem mass spectrometry (GC-MS/MS), we established a simple, rapid, and efficient method for the simultaneous determination of four skin penetration enhancers in cosmetics, including isosorbide dimethyl ether, isopropyl myristate, N-butylsaccharin and Azone. The extraction procedure was performed in a centrifuge tube, allowing extraction and purification in a single step. The cosmetic sample was extracted by n-hexane-ethyl acetate (1:1, V/V), purified by silica gel and anhydrous magnesium sulfate as the solid phase purification agent, separated on a TG-5 ms column (30.0 m × 0.25 mm × 0.25 µ m), confirmed and detected by GC-MS/MS in the selected reaction monitoring (SRM) mode, and quantified by the internal standard method with Di-n­butyl phthalate-D4(DBP-D4) as the internal standard. The selections of a column, extraction solvent, and solid phase purification agent were optimized. Under the optimized conditions, the four skin penetration enhancers showed good linearities in the range of 0.02∼0.50 mg L - 1. The correlation coefficients (r) were 0.992 ∼ 0.997, exceeding the specifications requirements (r ≥ 0.990); The detection (LODs, S/N = 3) and quantification limits (LOQs, S/N = 10) of the method were 0.08 ∼ 0.12 mg kg-1 and 0.25 ∼ 0.40 mg kg-1, respectively. According to the cosmetic matrix in different formulation systems, the spiked recovery tests were carried out at three levels, i.e., low, medium, and high. The average recoveries of the analytes were 85.3% ∼ 95.6%, and the relative standard deviations (RSDs, n = 6) were 2.1% ∼ 7.8%. The established method was also employed to analyze cosmetics in the market. Azone, isosorbide dimethyl ether, and isopropyl myristate resulted as the most widely used skin penetration enhancers in cosmetics. The method established in this study has the advantages of operational simplicity, high sensitivity, good reproducibility, and low consumption of samples and solvents. Moreover, it can be used to determine skin penetration enhancers in cosmetics.

Live Imaging of the Dehydration Effect of Isosorbide on the Normal and Hydropic Guinea Pig Cochleae Using Optical Coherence Tomography.

OBJECTIVE: To investigate the isosorbide-induced dehydration effect on the endolymphatic space by intratympanic administration of isosorbide. BACKGROUND: Isosorbide, an osmotic diuretic, is used orally as a typical conservative therapy for Menière's disease (MD) in Japan. The dehydration effect occurs 6 hours after isosorbide ingestion. Intratympanic administration of isosorbide resolves endolymphatic hydrops faster than oral ingestion. In addition, the dehydration effect has never been shown directly. Therefore, we investigated the dehydration effect of intratympanic administration of isosorbide on endolymphatic hydrops using optical coherence tomography. METHODS: We used eight Hartley guinea pigs, divided into normal and hydrops groups. In the hydrops group, the animals underwent endolymphatic sac obliteration to create endolymphatic hydrops. We obtained midmodiolar section images of the cochleae using optical coherence tomography. Then, 50 to 70% isosorbide was sequentially administered intratympanically for 5 minutes, and the apical turn of the cochlea was observed. The relative midmodiolar cross-sectional area of the scala media was calculated for quantitative assessment of the endolymphatic space. RESULTS: In the normal group, 50% isosorbide had a slight but significant dehydration effect on the scala media; at 55 to 70%, Reissner's membrane became flat. In the hydrops group, 50% isosorbide slightly reduced endolymphatic hydrops; 65% flattened Reissner's membrane, and 70% slightly concaved it toward the basilar membrane. CONCLUSION: The results suggest that we could select the concentration of isosorbide according to the stage or severity of MD and relief from acute attack. Intratympanic administration of isosorbide may be a promising treatment for patients with MD.

Nature-Derived Epoxy Resin Monomers with Reduced Sensitizing Capacity─Isosorbide-Based Bis-Epoxides.

Epoxy resin systems (ERSs) are a class of thermosetting resins that become thermostable and insoluble polymers upon curing. They are widely used as components of protective surfaces, adhesives, and paints and in the manufacturing of composites in the plastics industry. The diglycidyl ether of bisphenol A (DGEBA) is used in 75-90% of ERSs and is thus by far the most used epoxy resin monomer (ERM). Unfortunately, DGEBA is a strong skin sensitizer and it is one of the most common causes of occupational contact dermatitis. Furthermore, DGEBA is synthesized from bisphenol A (BPA), which is a petroleum-derived chemical with endocrine-disruptive properties. In this work, we have used isosorbide, a renewable and nontoxic sugar-based material, as an alternative to BPA in the design of ERMs. Three different bis-epoxide isosorbide derivatives were synthesized: the diglycidyl ether of isosorbide (1) and two novel isosorbide-based bis-epoxides containing either a benzoic ester (2) or a benzyl ether linkage (3). Assessment of the in vivo sensitizing potency of the isosorbide bis-epoxides in the murine local lymph node assay (LLNA) showed that all three compounds were significantly less sensitizing than DGEBA, especially 2 which was nonsensitizing up to 25% w/v. The peptide reactivity showed the same order of reactivity as the LLNA, i.e., 2 being the least reactive, followed by 3 and then 1, which displayed similar peptide reactivity as DGEBA. Skin permeation of 2 and 3 was compared to DGEBA using ex vivo pig skin and static Franz cells. The preliminary investigations of the technical properties of the polymers formed from 1-3 were promising. Although further investigations of the technical properties are needed, all isosorbide bis-epoxides have the potential to be less sensitizing renewable replacements of DGEBA, especially 2 that had the lowest sensitizing potency in vivo as well as the lowest peptide reactivity.

The role of serum osmolality in Meniere's disease with acute sensorineural hearing loss.

OBJECTIVE: This study investigated the role of serum osmolality in Meniere's disease (MD) patients with acute sensorineural hearing loss (SNHL). DESIGN: Retrospective study. STUDY SAMPLES: Twenty definite MD patients with acute unilateral SNHL were treated with an osmotic diuretic (Isosorbide, 100 mL daily) and assigned to Group A. Another 20 age- and sex-matched definite MD patients with acute SNHL were not given Isosorbide and assigned to Group B. Both groups underwent audiometry and blood examination for serum osmolality before and after treatment. RESULTS: Group A revealed a significant increase in serum osmolality after treatment. The optimal cut-off values for increased serum osmolality in Group A were +1.5 mOSM/L for predicting hearing improvement at frequencies of 250-1000 Hz, and +2.5 mOSM/L at 2000-4000 Hz. Comparing increased levels of serum osmolality (> +2.0 vs. ≤ +2.0 mOSM/L), Isosorbide dosing at 3.0 L vs. 1.0 L, significantly differed in the odds ratio (OR). Isosorbide at a total dosage of 3.0 L thus improves the hearing threshold by >10 dB at frequencies of 250-2000 Hz. CONCLUSION: The Isosorbide at a total dosage of 3.0 L may increase serum osmolality by > +2.0 mOSM/L, and improve the hearing threshold for hydropic ears at least >10 dB at low- and mid-frequencies.

Profiling polysorbate 80 components using comprehensive liquid chromatography-tandem mass spectrometry analysis.

RATIONALE: Polysorbate 80 (PS80) is an amphipathic, nonionic surfactant commonly used in pharmaceutical protein formulations and is composed of fatty acid (FA) esters of polyethoxylated sorbitan. However, commercial PS80 products contain substantial amounts of by-products. The development of simple and reliable methods for PS80 component analysis is challenging given the inherent heterogeneity. METHOD: We developed a comprehensive liquid chromatography-tandem mass spectrometry (LC-MS/MS) method to profile the components of PS80. Semi-comprehensive LC-MS/MS analyses of 11 subspecies in three commercial PS80 products were performed to estimate the average degree of polymerization of the ethylene oxide units (Avg-n) in the molecules. Furthermore, three subspecies (polyoxyethylene sorbitan monoester, polyoxyethylene isosorbide monoester, and polyoxyethylene monoester) were analyzed to estimate the composition ratios of the seven ester-bonded FAs present in PS80. RESULTS: The Avg-n values of five polyoxyethylene sorbitan esters (none, mono, di, tri, and tetra), three polyoxyethylene isosorbide esters (none, mono, and di), and three polyoxyethylene esters (none, mono, and di) were 26.5-30.6, 12.1-14.6, and 11.4-15.8, respectively. These values were comparable regardless of the number of ester-bonded FAs. Each product had a similar FA composition ratio regardless of the differences in the subspecies. However, the obtained C18:2 values were higher than those reported in the product certificates. CONCLUSION: The proposed LC-MS/MS method evaluated the overall PS80 components, revealing the possibility of underestimation of ester-bonded linoleic acid using the conventional gas chromatography-mass spectrometry method. The similarity of Avg-n values and FA compositions among subspecies suggested the high reliability of these results, indicating that the presented approach may help in the quality control of PS80 formulations.

Overcoming the low reactivity of biobased, secondary diols in polyester synthesis.

Shifting away from fossil- to biobased feedstocks is an important step towards a more sustainable materials sector. Isosorbide is a rigid, glucose-derived secondary diol, which has been shown to impart favourable material properties, but its low reactivity has hampered its use in polyester synthesis. Here we report a simple, yet innovative, synthesis strategy to overcome the inherently low reactivity of secondary diols in polyester synthesis. It enables the synthesis of fully biobased polyesters from secondary diols, such as poly(isosorbide succinate), with very high molecular weights (Mn up to 42.8 kg/mol). The addition of an aryl alcohol to diol and diacid monomers was found to lead to the in-situ formation of reactive aryl esters during esterification, which facilitated chain growth during polycondensation to obtain high molecular weight polyesters. This synthesis method is broadly applicable for aliphatic polyesters based on isosorbide and isomannide and could be an important step towards the more general commercial adaption of fully biobased, rigid polyesters.

Isosorbide Fatty Acid Diesters Have Synergistic Anti-Inflammatory Effects in Cytokine-Induced Tissue Culture Models of Atopic Dermatitis.

Atopic dermatitis (AD) is a chronic disease in which epidermal barrier disruption triggers Th2-mediated eruption of eczematous lesions. Topical emollients are a cornerstone of chronic management. This study evaluated efficacy of two plant-derived oil derivatives, isosorbide di-(linoleate/oleate) (IDL) and isosorbide dicaprylate (IDC), using AD-like tissue culture models. Treatment of reconstituted human epidermis with cytokine cocktail (IL-4 + IL-13 + TNF-α + IL-31) compromised the epidermal barrier, but this was prevented by co-treatment with IDL and IDC. Cytokine stimulation also dysregulated expression of keratinocyte (KC) differentiation genes whereas treatment with IDC or IDL + IDC up-regulated genes associated with early (but not late) KC differentiation. Although neither IDL nor IDC inhibited Th2 cytokine responses, both compounds repressed TNF-α-induced genes and IDL + IDC led to synergistic down-regulation of inflammatory (IL1B, ITGA5) and neurogenic pruritus (TRPA1) mediators. Treatment of cytokine-stimulated skin explants with IDC decreased lactate dehydrogenase (LDH) secretion by more than 50% (more than observed with cyclosporine) and in vitro LDH activity was inhibited by IDL and IDC. These results demonstrate anti-inflammatory mechanisms of isosorbide fatty acid diesters in AD-like skin models. Our findings highlight the multifunctional potential of plant oil derivatives as topical ingredients and support studies of IDL and IDC as therapeutic candidates.

Renewable Resources for Enantiodiscrimination: Chiral Solvating Agents for NMR Spectroscopy from Isomannide and Isosorbide.

A new family of chiral selectors was synthesized in a single synthetic step with yields up to 84% starting from isomannide and isosorbide. Mono- or disubstituted carbamate derivatives were obtained by reacting the isohexides with electron-donating arylisocyanate (3,5-dimethylphenyl- or 3,5-dimethoxyphenyl-) and electron-withdrawing arylisocyanate (3,5-bis(trifluoromethyl)phenyl-) groups to test opposite electronic effects on enantiodifferentiation. Deeper chiral pockets and derivatives with more acidic protons were obtained by derivatization with 1-naphthylisocyanate and p-toluenesulfonylisocyanate, respectively. All compounds were tested as chiral solvating agents (CSAs) in 1H NMR experiments with rac-N-3,5-dinitrobenzoylphenylglycine methyl ester in order to determine the influence of different structural features on the enantiodiscrimination capabilities. Some selected compounds were tested with other racemic analytes, still leading to enantiodiscrimination. The enantiodiscrimination conditions were then optimized for the best CSA/analyte couple. Finally, a 2D- and 1D-NMR study was performed employing the best performing CSA with the two enantiomers of the selected analyte, aiming to determine the enantiodiscrimination mechanism, the stoichiometry of interaction, and the complexation constant.

Biomass-derived isosorbide-based thermoresponsive hydrogel for drug delivery.

Herein, we describe the design and synthesis of a new variety of bio-based hydrogel films using a Cu(I)-catalyzed photo-click reaction. These films exhibited thermal-triggered swelling-deswelling and were constructed by crosslinking a triazide derivative of glycerol ethoxylate and dialkyne structures derived from isosorbide, a well-known plant-based platform molecule. The success of the click reaction was corroborated through infrared spectroscopy (FTIR) and the smooth surface of the obtained films was confirmed by scanning electron microscopy (SEM). The thermal characterization was carried out in terms of thermogravimetry (TGA) and differential scanning calorimetry (DSC), from which the decomposition onset and glass transition temperatures were determined, respectively. Additionally, mechanical properties of the samples were estimated by stress-strain experiments. Then, their swelling and deswelling properties were systematically examined in PBS buffer, revealing a thermoresponsive behavior that was successfully tested in the release of the anticancer drug doxorubicin. We also confirmed the non-cytotoxicity of these materials, which is a fundamental aspect for their potential use as drug carriers or tissue engineering matrices.

Ultra-Tough Elastomers from Stereochemistry-Directed Hydrogen Bonding in Isosorbide-Based Polymers.

The remarkable elasticity and tensile strength found in natural elastomers are challenging to mimic. Synthetic elastomers typically feature covalently cross-linked networks (rubbers), but this hinders their reprocessability. Physical cross-linking via hydrogen bonding or ordered crystallite domains can afford reprocessable elastomers, but often at the cost of performance. Herein, we report the synthesis of ultra-tough, reprocessable elastomers based on linear alternating polymers. The incorporation of a rigid isohexide adjacent to urethane moieties affords elastomers with exceptional strain hardening, strain rate dependent behavior, and high optical clarity. Distinct differences were observed between isomannide and isosorbide-based elastomers where the latter displays superior tensile strength and strain recovery. These phenomena are attributed to the regiochemical irregularities in the polymers arising from their distinct stereochemistry and respective inter-chain hydrogen bonding.

Biodegradability of novel high Tg poly(isosorbide-co-1,6-hexanediol) oxalate polyester in soil and marine environments.

In order to reduce the plastic accumulation in the environment, biodegradable plastics are attracting interest in the plastics market. However, the low thermal stability of most amorphous biodegradable polymers limits their application. With the aim of combining high glass transition temperature (Tg), with good (marine) biodegradation a family of novel fully renewable poly(isosorbide-co-diol) oxalate (PISOX-diol) copolyesters was recently developed. In this study, the biodegradability of a representative copolyester, poly(isosorbide-co-1,6-hexanediol) oxalate (PISOX-HDO), with 75/25 mol ratio IS/HDO was evaluated at ambient temperature (25 °C) in soil and marine environment by using a Respicond system with 95 parallel reactors, based on the principle of frequently monitoring CO2 evolution. During 50 days incubation in soil and seawater, PISOX-HDO mineralised faster than cellulose. The ready biodegradability of PISOX-HDO is related to the relatively fast non-enzymatic hydrolysis of polyoxalates. To study the underlying mechanism of PISOX-HDO biodegradation, the non-enzymatic hydrolysis of PISOX-HDO and the biodegradation of the monomers in soil were also investigated. Complete hydrolysis was obtained in approximately 120 days (tracking the formation of hydrolysis products via 1H NMR). It was also shown that (enzymatic) hydrolysis to the constituting monomers is the rate-determining step in this biodegradation mechanism. These monomers can subsequently be consumed and mineralised by (micro)organisms in the environment much faster than the polyesters. The combination of high Tg (>100 °C) and fast biodegradability is quite unique and makes this PISOX-HDO copolyester ideal for short term applications that demand strong mechanical and physical properties.

Isosorbide plasticized corn starch filled with poly(3-hydroxybutyrate-co-3-hydroxyvalerate) microparticles: Properties and behavior under environmental factors.

In this work, new green and fully biodegradable composites, based on corn starch, plasticized with two different amounts of isosorbide and filled by poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) microparticles, were obtained by melt processing. The analysis of their morphologies, crystallinity, structural interactions and dynamomechanical properties as well as the evaluation of their moisture resistance and biodegradability in soil, were performed in function of the plasticizer and/or microparticle amount. The analysis of morphology, crystallinity and structural interactions showed that the plasticization process was completed under the melting processing conditions used. The microparticles were homogeneously dispersed in the thermoplastic starch matrix without suffering any deformation or breaking during the processing. Biocomposites with adequate storage modulus values were obtained, especially the TPS plasticized with 35% of isosorbide and filled with 5 wt% of PHBV microparticles. The incorporation of PHBV microparticles leads to biocomposites with higher moisture resistance. All the biocomposites were completely biodegraded in soil in a short period of time. The performed study demonstrated that these biocomposites could be used for applications in the packaging industry.

Sustainable Sorbitol Dehydration to Isosorbide using Solid Acid Catalysts: Transition from Batch Reactor to Continuous-Flow System.

Isosorbide is one of the most interesting cellulosic-derived molecules with great potential to be implemented in wide range of products that shaping our daily life. This Review describes the recent developments in the production of isosorbide from sorbitol in batch and continuous-flow systems under hydrothermal conditions using solid acid catalysts. Moreover, the current hurdles and challenges regarding the synthesis of isosorbide from cellulosic biomass in continuous-flow process using solid acid catalysts are summarized, as well as the scaling-up of this process into pilot level, which will lead to an established industrial process with high sustainability metrics.

Misoprostol plus isosorbide mononitrate versus misoprostol alone for cervical ripening during labor induction: A systematic review and meta-analysis of randomized controlled trials.

AIM: To conduct a systematic review and meta-analysis of all randomized controlled trials (RCTs) that examined the maternal and neonatal outcomes of misoprostol+isosorbide mononitrate (ISMN) versus misoprostol alone (control) in promoting cervical ripening during labor induction. METHODS: We searched five databases from inception until 05-May-2021. We assessed risk of bias of RCTs, meta-analyzed 23 endpoints, and pooled them as mean difference or risk ratio with 95% confidence interval. RESULTS: Overall, five RCTs met the inclusion criteria, comprising 850 patients (426 and 424 patients were allocated to misoprostol+ISMN and misoprostol group, respectively). Overall, the RCTs had a low risk of bias. Pertaining to maternal delivery-related outcomes, there was no significant difference between both groups regarding the mean interval from drug administration to delivery, rate of vaginal delivery, rate of cesarean section delivery, and rate of need for oxytocin augmentation. Pertaining to maternal drug-related side effects, the rate of maternal headache was significantly higher in disfavor of the misoprostol+ISMN compared with misoprostol alone. However, the rates of maternal nausea, hypotension, flushing, palpitation, dizziness, postpartum hemorrhage, and uterine tachysystole did not differ between both groups. Pertaining to neonatal outcomes, there was no significant difference between both groups regarding rates of NICU admission, meconium-stained amniotic fluid, and Apgar score <7 at five minutes. CONCLUSION: Compared with misoprostol alone, co-administration of misoprostol+ISMN did not correlate with superior maternal delivery-related outcomes. The rate of maternal headache was significantly higher in disfavor of the misoprostol+ISMN group. There was no significant difference between both groups regarding neonatal endpoints.

Rapid Improvement in Jaundice Using Transdermal Isosorbide Tape as a Nitric Oxide Donor in Two Adult Patients with Transplantation-associated Microangiopathy Related to Graft-versus-host Disease.

Two adult patients with acute leukemia developed transplantation-associated microangiopathy (TAM) related to graft-versus-host disease (GVHD). Both patients were resistant to standard therapy for TAM and GVHD, which led to markedly elevated serum total bilirubin levels of 47.5 and 10.6 mg/dL, respectively. Transdermal isosorbide tape as a nitric oxide donor was applied to Patients 1 and 2 on post-transplantation days 60 and 66, respectively, which rapidly improved their jaundice after 1 day. This is the first report to describe the efficacy of transdermal isosorbide tape for adult patients with jaundice associated with TAM related to GVHD.

Reduced deliquescency of isosorbide by cocrystallization and mechanisms for hygroscopicity.

Isosorbide (ISO) is an effective hyperosmotic agent that can be administrated orally and is used as a therapeutic agent for brain pressure drop, glaucoma, and Meniere's disease. However, the critical relative humidity (CRH) of ISO is about 48% RH at 25 °C, and it deliquesces in humid environments. In this study, we attempted to reduce the deliquescence of ISO using cocrystallization and analyze the water adsorption mechanism from the crystal structure. Four new ISO cocrystals with piperazine (PZ), hydrochlorothiazide (HCT), 3,5-dihydroxybenzoic acid (35DHBA), or gallic acid (GA) were identified. The dynamic vapor sorption analyses demonstrated that all the cocrystals showed higher CRHs than the ISO crystal. Although water adsorption below the CRH was observed for all cocrystals, the water molecules adsorbed in the ISO-PZ and ISO-GA cocrystals were lower than those in the ISO crystal. Investigation of the crystal structures suggested that the amount of water adsorbed might be related to the degree of exposure of the ISO hydroxyl groups on the crystal surface. Given the CRH, water adsorption below the CRH, thermal stability, apparent dissolution rate, and toxicity level of the coformer, the ISO-GA cocrystal is the most suitable for preparing a solid formulation of ISO.

Poly(alkanoyl isosorbide methacrylate)s: From Amorphous to Semicrystalline and Liquid Crystalline Biobased Materials.

We have prepared a series of 12 d-isosorbide-2-alkanoate-5-methacrylate monomers as single regioisomers with different pendant linear C2-C20 alkanoyl chains using biocatalytic and chemical acylations. By conventional radical polymerization, these monomers provided high-molecular-weight biobased poly(alkanoyl isosorbide methacrylate)s (PAIMAs). Samples with C2-C12 alkanoyl chains were amorphous with glass transition temperatures from 107 to 54 °C, while C14-C20 chains provided semicrystalline materials with melting points up to 59 °C. Moreover, PAIMAs with C13-C20 chains formed liquid crystalline mesophases with transition temperatures up to 93 °C. The mesophases were studied using polarized optical microscopy, and rheology showed stepwise changes of the viscosity at the transition temperature. Unexpectedly, a PAIMA prepared from a regioisomeric monomer (C18) showed semicrystallinity but not liquid crystallinity. Consequently, the properties of the PAIMAs were readily tunable by controlling the phase structure and transitions through the alkanoyl chain length and the regiochemistry to form fully amorphous, semicrystalline, or semi/liquid crystalline materials.