Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 14.505
Filtrar
1.
Biotechnol J ; 19(3): e2300615, 2024 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-38472086

RESUMO

Phytosterols usually have to be esterified to various phytosterol esters to avoid their disadvantages of unsatisfactory solubility and low bioavailability. The enzymatic synthesis of phytosterol esters in a solvent-free system has advantages in terms of environmental friendliness, sustainability, and selectivity. However, the limitation of the low stability and recyclability of the lipase in the solvent-free system, which often requires a relatively high temperature to induce the viscosity, also increased the industrial production cost. In this context, a low-cost material, namely diatomite, was employed as the support in the immobilization of Candida rugosa lipase (CRL) due to its multiple modification sites. The Fe3 O4 was also then introduced to this system for quick and simple separation via the magnetic field. Moreover, to further enhance the immobilization efficiency of diatomite, a modification strategy which involved the octadecyl and sulfonyl group for regulating the hydrophobicity and interaction between the support and lipase was successfully developed. The optimization of the ratio of the modifiers suggested that the -SO3 H/C18 (1:1.5) performed best with an enzyme loading and enzyme activity of 84.8 mg·g-1 and 54 U·g-1 , respectively. Compared with free CRL, the thermal and storage stability of CRL@OSMD was significantly improved, which lays the foundation for the catalytic synthesis of phytosterol esters in solvent-free systems. Fortunately, a yield of 95.0% was achieved after optimizing the reaction conditions, and a yield of 70.0% can still be maintained after six cycles.


Assuntos
Terra de Diatomáceas , Enzimas Imobilizadas , Fitosteróis , Enzimas Imobilizadas/metabolismo , Esterificação , Lipase/metabolismo , Biocatálise , Solventes , Fitosteróis/metabolismo , Esteróis , Estabilidade Enzimática , Ésteres
2.
Int J Mol Sci ; 25(5)2024 Feb 27.
Artigo em Inglês | MEDLINE | ID: mdl-38473992

RESUMO

Multi-enzymatic strategies have shown improvement in bioconversion during cofactor regeneration. In this study, purified l-arabinitol 4-dehydrogenase (LAD) and nicotinamide adenine dinucleotide oxidase (Nox) were immobilized via individual, mixed, and sequential co-immobilization approaches on magnetic nanoparticles, and were evaluated to enhance the conversion of l-arabinitol to l-xylulose. Initially, the immobilization of LAD or Nox on the nanoparticles resulted in a maximum immobilization yield and relative activity of 91.4% and 98.8%, respectively. The immobilized enzymes showed better pH and temperature profiles than the corresponding free enzymes. Furthermore, co-immobilization of these enzymes via mixed and sequential methods resulted in high loadings of 114 and 122 mg/g of support, respectively. Sequential co-immobilization of these enzymes proved more beneficial for higher conversion than mixed co-immobilization because of better retaining Nox residual activity. Sequentially co-immobilized enzymes showed a high relative conversion yield with broader pH, temperature, and storage stability profiles than the controls, along with high reusability. To the best of our knowledge, this is the first report on the mixed or sequential co-immobilization of LAD and Nox on magnetic nanoparticles for l-xylulose production. This finding suggests that selecting a sequential co-immobilization strategy is more beneficial than using individual or mixed co-immobilized enzymes on magnetic nanoparticles for enhancing conversion applications.


Assuntos
Enzimas Imobilizadas , Nanopartículas de Magnetita , Álcoois Açúcares , Enzimas Imobilizadas/metabolismo , Xilulose , Temperatura , Concentração de Íons de Hidrogênio , Estabilidade Enzimática
3.
Molecules ; 29(5)2024 Feb 24.
Artigo em Inglês | MEDLINE | ID: mdl-38474502

RESUMO

Enzymes play an important role in numerous natural processes and are increasingly being utilized as environmentally friendly substitutes and alternatives to many common catalysts. Their essential advantages are high catalytic efficiency, substrate specificity, minimal formation of byproducts, and low energy demand. All of these benefits make enzymes highly desirable targets of academic research and industrial development. This review has the modest aim of briefly overviewing the classification, mechanism of action, basic kinetics and reaction condition effects that are common across all six enzyme classes. Special attention is devoted to immobilization strategies as the main tools to improve the resistance to environmental stress factors (temperature, pH and solvents) and prolong the catalytic lifecycle of these biocatalysts. The advantages and drawbacks of methods such as macromolecular crosslinking, solid scaffold carriers, entrapment, and surface modification (covalent and physical) are discussed and illustrated using numerous examples. Among the hundreds and possibly thousands of known and recently discovered enzymes, hydrolases and oxidoreductases are distinguished by their relative availability, stability, and wide use in synthetic applications, which include pharmaceutics, food and beverage treatments, environmental clean-up, and polymerizations. Two representatives of those groups-laccase (an oxidoreductase) and lipase (a hydrolase)-are discussed at length, including their structure, catalytic mechanism, and diverse usage. Objective representation of the current status and emerging trends are provided in the main conclusions.


Assuntos
Lacase , Lipase , Lipase/química , Lacase/química , Enzimas Imobilizadas/química , Catálise , Substâncias Macromoleculares
4.
Molecules ; 29(5)2024 Feb 28.
Artigo em Inglês | MEDLINE | ID: mdl-38474553

RESUMO

This paper reports an innovative study that aims to address key issues in the efficient recycling of wastepaper cellulose. The research team utilized the temperature-responsive upper critical solution temperature (UCST) polymer P(NAGA-b-DMA) in combination with the LytA label's affinity for choline analogs. This innovative approach enabled them to successfully develop a novel soluble immobilized enzyme, P(NAGA-b-DMA)-cellulase. This new enzyme has proven highly effective, significantly enhancing the degradation of wastepaper cellulose while demonstrating exceptional stability. Compared with the traditional insoluble immobilized cellulase, the enzyme showed a significant improvement in the pH, temperature stability, recycling ability, and storage stability. A kinetic parameter calculation showed that the enzymatic effectiveness of the soluble immobilized enzyme was much better than that of the traditional insoluble immobilized cellulase. After the immobilization reaction, the Michaelis constant of the immobilized enzyme was only increased by 11.5%. In the actual wastepaper degradation experiment, the immobilized enzyme was effectively used, and it was found that the degradation efficiency of wastepaper cellulose reached 80% of that observed in laboratory conditions. This novel, thermosensitive soluble immobilized cellulase can efficiently catalyze the conversion of wastepaper cellulose into glucose under suitable conditions, so as to further ferment into environmentally friendly biofuel ethanol, which provides a solution to solve the shortage of raw materials and environmental protection problems in the paper products industry.


Assuntos
Celulase , Enzimas Imobilizadas , Enzimas Imobilizadas/metabolismo , Celulose/metabolismo , Celulase/metabolismo , Temperatura , Polímeros , Hidrólise
5.
Bioprocess Biosyst Eng ; 47(3): 313-323, 2024 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-38438572

RESUMO

Molecular docking is an important computational analysis widely used to predict the interaction of enzymes with several starting materials for developing new valuable products from several starting materials, including oils and fats. In the present study, molecular docking was used as an efficient in silico screening tool to select biocatalysts with the highest catalytic performance in butyl esters production in a solvent-free system, an eco-friendly approach, via direct esterification of free fatty acids from Licuri oil with butanol. For such purpose, three commercial lipase preparations were used to perform molecular docking studies such as Burkholderia cepacia (BCL), Porcine pancreatic (PPL), and Candida rugosa (CRL). Concurrently, the results obtained in BCL and CRL are the most efficient in the esterification process due to their higher preference for catalyzing the esterification of lauric acid, the main fatty acid found in the licuri oil composition. Meanwhile, PPL was the least efficient because it preferentially interacts with minor fatty acids. Molecular docking with the experimental results indicated the better performance in the synthesis of esters was BCL. In conclusion, experimental results analysis shows higher enzymatic productivity in esterification reactions of 1294.83 µmol/h.mg, while the CRL and PPL demonstrated the lowest performance (189.87 µmol / h.mg and 23.96 µmol / h.mg, respectively). Thus, molecular docking and experimental results indicate that BCL is a more efficient lipase to produce fatty acids and esters from licuri oil with a high content of lauric acid. In addition, this study also demonstrates the application of molecular docking as an important tool for lipase screening to achieve more sustainable production of butyl esters with a view synthesis of biolubricants.


Assuntos
Ácidos Graxos , Lipase , Animais , Suínos , Lipase/química , Simulação de Acoplamento Molecular , Domínio Catalítico , Ácidos Graxos/química , Esterificação , Ésteres , Ácidos Láuricos , Enzimas Imobilizadas/metabolismo
6.
Nano Lett ; 24(11): 3404-3412, 2024 Mar 20.
Artigo em Inglês | MEDLINE | ID: mdl-38451852

RESUMO

Assembling metal-organic frameworks (MOFs) into ordered multidimensional porous superstructures promises the encapsulation of enzymes for heterogeneous biocatalysts. However, the full potential of this approach has been limited by the poor stability of enzymes and the uncontrolled assembly of MOF nanoparticles onto suitable supports. In this study, a novel and exceptionally robust Ni-imidazole-based MOF was synthesized in water at room temperature, enabling in situ enzyme encapsulation. Based on this MOF platform, we developed a DNA-directed assembly strategy to achieve the uniform placement of MOF nanoparticles onto bacterial cellulose nanofibers, resulting in a distinctive "branch-fruit" structure. The resulting hybrid materials demonstrated remarkable versatility across various catalytic systems, accommodating natural enzymes, nanoenzymes, and multienzyme cascades, thus showcasing enormous potential as universal microbioreactors. Furthermore, the hierarchical composites facilitated rapid diffusion of the bulky substrate while maintaining the enzyme stability, with ∼3.5-fold higher relative activity compared to the traditional enzyme@MOF immobilized in bacterial cellulose nanofibers.


Assuntos
Enzimas Imobilizadas , Nanofibras , Enzimas Imobilizadas/química , Celulose , Frutas , DNA/química
7.
Nat Commun ; 15(1): 2299, 2024 Mar 14.
Artigo em Inglês | MEDLINE | ID: mdl-38485940

RESUMO

Designing complex synthetic materials for enzyme immobilization could unlock the utility of biocatalysis in extreme environments. Inspired by biology, we investigate the use of random copolymer brushes as dynamic immobilization supports that enable supra-biological catalytic performance of immobilized enzymes. This is demonstrated by immobilizing Bacillus subtilis Lipase A on brushes doped with aromatic moieties, which can interact with the lipase through multiple non-covalent interactions. Incorporation of aromatic groups leads to a 50 °C increase in the optimal temperature of lipase, as well as a 50-fold enhancement in enzyme activity. Single-molecule FRET studies reveal that these supports act as biomimetic chaperones by promoting enzyme refolding and stabilizing the enzyme's folded and catalytically active state. This effect is diminished when aromatic residues are mutated out, suggesting the importance of π-stacking and π-cation interactions for stabilization. Our results underscore how unexplored enzyme-support interactions may enable uncharted opportunities for using enzymes in industrial biotransformations.


Assuntos
Bacillus subtilis , Enzimas Imobilizadas , Enzimas Imobilizadas/química , Estabilidade Enzimática , Bacillus subtilis/metabolismo , Lipase/metabolismo , Temperatura , Biocatálise , Chaperonas Moleculares/metabolismo
8.
ACS Appl Bio Mater ; 7(3): 1381-1399, 2024 Mar 18.
Artigo em Inglês | MEDLINE | ID: mdl-38437181

RESUMO

Bilirubin oxidases (BODs) [EC 1.3.3.5 - bilirubin: oxygen oxido-reductase] are enzymes that belong to the multicopper oxidase family and can oxidize bilirubin, diphenols, and aryl amines and reduce the oxygen by direct four-electron transfer from the electrode with almost no electrochemical overpotential. Therefore, BOD is a promising bioelectrocatalyst for (self-powered) biosensors and/or enzymatic fuel cells. The advantages of electrochemically active BOD enzymes include selective biosensing, biocatalysis for efficient energy conversion, and electrosynthesis. Owing to the rise in publications and patents, as well as the expanding interest in BODs for a range of physiological conditions, this Review analyzes scientific literature reports on BOD enzymes and current hypotheses on their bioelectrocatalysis. This Review evaluates the specific research outcomes of the BOD in enzyme (protein) engineering, immobilization strategies, and challenges along with their bioelectrochemical properties, limitations, and applications in the fields of (i) biosensors, (ii) self-powered biosensors, and (iii) biofuel cells for powering bioelectronics.


Assuntos
Técnicas Biossensoriais , Enzimas Imobilizadas , Enzimas Imobilizadas/química , Oxirredutases , Oxigênio , Bilirrubina
9.
Bioresour Technol ; 397: 130505, 2024 Apr.
Artigo em Inglês | MEDLINE | ID: mdl-38423485

RESUMO

Enzyme immobilization is an effective method for improving the stability and reusability. However, linking at random sites on the enzyme results in low catalytic efficiency due to blockage of the active site or conformational changes. Therefore, controlling the orientation of enzymes on the carrier has been developed. Here, the site-specific mutation and the SpyTag/SpyCatcher systems were used to prepare a site-directed immobilized enzyme. The thermal stability of the immobilized enzyme was better than that of the free enzyme, and ≥80 % of the catalytic activity was retained after 30 days of storage. Furthermore, the Michaelis constant (Km) and the turnover number (kcat) of the immobilized enzyme were 5.23-fold lower and 6.11-fold higher than those of the free enzyme, respectively, which appeared to be related to changes in secondary structure after immobilization. These findings provide a new and effective option for enzyme-directed immobilization.


Assuntos
Enzimas Imobilizadas , Nanopartículas , Enzimas Imobilizadas/metabolismo , Estabilidade Enzimática , Catálise , Concentração de Íons de Hidrogênio
10.
Bioorg Chem ; 145: 107183, 2024 Apr.
Artigo em Inglês | MEDLINE | ID: mdl-38340474

RESUMO

Prenyltransferases catalyze the synthesis of prenylated flavonoids, providing these with greater lipid solubility, biological activity, and availability. In this study, a thermostable prenyltransferase (AfPT) from Aspergillus fumigatiaffinis was cloned and expressed in Escherichia coli. By optimizing induction conditions, the expression level of AfPT reached 39.3 mU/mL, which was approximately 200 % of that before optimization. Additionally, we determined the enzymatic properties of AfPT. Subsequently, AfPT was immobilized on carboxymethyl cellulose magnetic nanoparticles (CMN) at a maximum load of 0.6 mg/mg. Optimal activity of CMN-AfPT was achieved at pH 8.0 and 55 °C. Thermostability assays showed that the residual activity of CMN-AfPT was greater than 50 % after incubation at 55 °C for 4 h. Km and Vmax of CMN-AfPT for naringenin were 0.082 mM and 5.57 nmol/min/mg, respectively. The Kcat/Km ratio of CMN-AfPT was higher than that of AfPT. Residual prenyltransferase activity of CMN-AfPT remained higher than 70 % even after 30 days of storage. Further, CMN-AfPT retained 68 % of its original activity after 10 cycles of reuse. Compared with free AfPT, CMN-AfPT showed higher catalytic efficiency, thermostability, metal ion tolerance, substrate affinity, storage stability, and reusability. Our study presents a thermostable prenyltransferase and its immobilized form for the production of prenylated flavonoids in vitro.


Assuntos
Aspergillus , Dimetilaliltranstransferase , Flavanonas , Dimetilaliltranstransferase/genética , Dimetilaliltranstransferase/metabolismo , Flavanonas/farmacologia , Flavonoides/química , Concentração de Íons de Hidrogênio , Enzimas Imobilizadas/química , Estabilidade Enzimática , Temperatura
11.
Enzyme Microb Technol ; 175: 110409, 2024 Apr.
Artigo em Inglês | MEDLINE | ID: mdl-38335559

RESUMO

The solvent-free esterification of the free fatty acids (FFAs) obtained by the hydrolysis of castor oil (a non-edible vegetable oil) with 2-ethyl-1-hexanol (a branched fatty alcohol) was catalyzed by different free lipases. Eversa Transform 2.0 (ETL) features surpassed most commercial lipases. Some process parameters were optimized by the Taguchi method (L16'). As a result, a conversion over 95% of the FFAs of castor oil into esters with lubricants properties was achieved under optimized reaction conditions (15 wt% of biocatalyst content, 1:4 molar ratio (FFAs/alcohol), 30 °C, 180 rpm, 96 h). The substrates molar ratio had the highest influence on the dependent variable (conversion at 24 h). FFAs/2-ethyl-1-hexanol esters were characterized regarding the physicochemical and tribological properties. Interestingly, the modification of the FFAs with 2-ethyl-1-hexanol by ETL increased the oxidative stability of the FFAs feedstock from 0.18 h to 16.83 h. The biolubricants presented a lower friction coefficient than the reference commercial mineral lubricant (0.052 ± 0.07 against 0.078 ± 0.04). Under these conditions, ETL catalyzed the oligomerization of ricinoleic acid (a hydroxyl fatty acid) into estolides, reaching a conversion of 25.15% of the initial FFAs (for the first time).


Assuntos
Óleo de Rícino , Ácidos Graxos não Esterificados , Hexanóis , Esterificação , Ésteres/química , Ácidos Graxos/química , Lipase/metabolismo , Etanol , Catálise , Enzimas Imobilizadas/química
12.
Colloids Surf B Biointerfaces ; 235: 113764, 2024 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-38301428

RESUMO

Development of immobilized lipase with excellent catalytic performance and low cost is the major challenge for large-scale industrial applications. In this study, green renewable microcrystalline cellulose (MCC) that was hydrophobically modified with D-alanine (Ala) or L-lysine (Lys) was used for immobilizing Candida antarctica lipase B (CALB). The improved catalytic properties were investigated by experimental and computational methods. CALB immobilized on MCC-Ala with higher hydrophobicity showed better catalytic activity than CALB@MCC-Lys because the increased flexibility of the lid region of CALB@MCC-Ala favored the formation of open conformation. Additionally, the low root mean square deviation and the high ß-sheet and α-helix contents of CALB@MCC-Ala indicated that the structure became more stable, leading to a significantly enhanced stability (54.80% and 90.90% relative activity at 70 °C and pH 9.0, respectively) and good reusability (48.92% activity after 5 cycles). This study provides a promising avenue to develop immobilized lipase with high catalytic properties for industry applications.


Assuntos
Aminoácidos , Celulose , Enzimas Imobilizadas , Enzimas Imobilizadas/química , Candida/metabolismo , Lipase/química , Proteínas Fúngicas/química , Alanina , Lisina
13.
ACS Appl Mater Interfaces ; 16(9): 11617-11626, 2024 Mar 06.
Artigo em Inglês | MEDLINE | ID: mdl-38410049

RESUMO

Biodegradation of insoluble biomass such as cellulose via carbohydrase enzymes is an effective approach to break down plant cell walls and extract valuable materials therein. Yet, the high cost and poor reusability of enzymes are practical concerns. We recently proved that immobilizing multiple digestive enzymes on metal-organic materials (MOMs) allows enzymes to be reused via gravimetric separation, improving the cost efficiency of cereal biomass degradation [ACS Appl. Mater. Interfaces 2021, 13, 36, 43085-43093]. However, this strategy cannot be adapted for enzymes whose substrates or products are insoluble (e.g., cellulose crystals). Recently, we described an alternative approach based on magnetic metal-organic frameworks (MOFs) using model enzymes/substrates [ACS Appl. Mater. Interfaces 2020, 12, 37, 41794-41801]. Here, we aim to prove the effectiveness of combining these two strategies in cellulose degradation. We immobilized multiple carbohydrase enzymes that cooperate in cellulose degradation via cocrystallization with Ca2+, a carboxylate ligand (BDC) in the absence and presence of magnetic nanoparticles (MNPs). We then compared the separation efficiency and enzyme reusability of the resultant multienzyme@Ca-BDC and multienzyme@MNP-Ca-BDC composites via gravimetric and magnetic separation, respectively, and found that, although both composites were effective in cellulose degradation in the first round, the multienzyme@MNP-Ca-BDC composites displayed significantly enhanced reusability. This work provides the first experimental demonstration of using magnetic solid supports to immobilize multiple carbohydrase enzymes simultaneously and degrade cellulose and promotes green/sustainable chemistry in three ways: (1) reusing the enzymes saves energy/sources to prepare them, (2) the synthetic conditions are "green" without generating unwanted wastes, and (3) using our composites to degrade cellulose is the first step of extracting valuable materials from sustainable biomasses such as plants whose growth does not rely on nonregeneratable resources.


Assuntos
Celulose , Enzimas Imobilizadas , Enzimas Imobilizadas/química , Biomassa , Celulose/química , Fenômenos Magnéticos
14.
Anal Chem ; 96(10): 4076-4085, 2024 Mar 12.
Artigo em Inglês | MEDLINE | ID: mdl-38408165

RESUMO

In this work, direct electron transfer (DET)-type extended gate field effect transistor (EGFET) enzymatic sensors were developed by employing DET-type or quasi-DET-type enzymes to detect glucose or lactate in both 100 mM potassium phosphate buffer and artificial sweat. The system employed either a DET-type glucose dehydrogenase or a quasi-DET-type lactate oxidase, the latter of which was a mutant enzyme with suppressed oxidase activity and modified with amine-reactive phenazine ethosulfate. These enzymes were immobilized on the extended gate electrodes. Changes in the measured transistor drain current (ID) resulting from changes to the working electrode junction potential (φ) were observed as glucose and lactate concentrations were varied. Calibration curves were generated for both absolute measured ID and ΔID (normalized to a blank solution containing no substrate) to account for variations in enzyme immobilization and conjugation to the mediator and variations in reference electrode potential. This work resulted in a limit of detection of 53.9 µM (based on ID) for glucose and 2.12 mM (based on ID) for lactate, respectively. The DET-type and Quasi-DET-type EGFET enzymatic sensor was then modeled using the case of the lactate sensor as an equivalent circuit to validate the principle of sensor operation being driven through OCP changes caused by the substrate-enzyme interaction. The model showed slight deviation from collected empirical data with 7.3% error for the slope and 8.6% error for the y-intercept.


Assuntos
Técnicas Biossensoriais , Elétrons , Técnicas Biossensoriais/métodos , Glucose/metabolismo , Glucose 1-Desidrogenase/metabolismo , Ácido Láctico , Enzimas Imobilizadas/metabolismo , Eletrodos
15.
PLoS One ; 19(2): e0292931, 2024.
Artigo em Inglês | MEDLINE | ID: mdl-38363771

RESUMO

Enzymes are biological molecules that act as catalysts and speed up the biochemical reactions. The world's biotechnological ventures are development of enzyme productiveness, and advancement of novel techniques for thriving their shelf existence. Nowadays, the most burning questions in enzyme technology are how to improve the enzyme productivity and reuse them. The immobilization of enzymes provides an excellent scope to reuse the enzymes several times to increase productivity. The main aim of the present study is the establishment of an immobilized multi-enzyme bio-system engineering process for the production of High-fructose corn syrup (HFCS) with an industrial focus. In this study, multi-enzyme such as α-amylase, glucoamylase and glucose isomerase were immobilized in various support matrices like sodium alginate, sawdust, sugarcane bagasse, rice bran and combination of alginate with cellulosic materials. The activities of the immobilized multi-enzyme system for the production of HFCS from the starch solution were determined. The multi-enzyme immobilized in sodium alginate shows better fructose conversion than free enzyme. Among the support matrices, multi-enzyme immobilized in sawdust produced total 80.74 mg/mL of fructose from starch solution and it was able to be used in several production cycles. On the other hand, multi-enzyme immobilized in combination of sodium alginate and sawdust produced the maximum amount of fructose (total 84.82 mg/mL). The free enzyme produced 17.25 mg/mL of fructose from the starch solution in only a single cycle. In this study a new fixed bed immobilized multi-enzyme bioreactor system was developed for the production of HFCS directly from starch. This finding will create a new opportunity for the application of immobilized multi-enzyme systems in many sectors of industrial biotechnology.


Assuntos
Xarope de Milho Rico em Frutose , Saccharum , Celulose , Saccharum/metabolismo , Enzimas Imobilizadas/química , Frutose/metabolismo , Amido/metabolismo , Alginatos/química
16.
Molecules ; 29(3)2024 Jan 29.
Artigo em Inglês | MEDLINE | ID: mdl-38338371

RESUMO

This work presents a framework for evaluating hybrid nanoflowers using Burkholderia cepacia lipase. It was expanded on previous findings by testing lipase hybrid nanoflowers (hNF-lipase) formation over a wide range of pH values (5-9) and buffer concentrations (10-100 mM). The free enzyme activity was compared with that of hNF-lipase. The analysis, performed by molecular docking, described the effect of lipase interaction with copper ions. The morphological characterization of hNF-lipase was performed using scanning electron microscopy. Fourier Transform Infrared Spectroscopy performed the physical-chemical characterization. The results show that all hNF-lipase activity presented values higher than that of the free enzyme. Activity is higher at pH 7.4 and has the highest buffer concentration of 100 mM. Molecular docking analysis has been used to understand the effect of enzyme protonation on hNF-lipase formation and identify the main the main binding sites of the enzyme with copper ions. The hNF-lipase nanostructures show the shape of flowers in their micrographs from pH 6 to 8. The spectra of the nanoflowers present peaks typical of the amide regions I and II, current in lipase, and areas with P-O vibrations, confirming the presence of the phosphate group. Therefore, hNF-lipase is an efficient biocatalyst with increased catalytic activity, good nanostructure formation, and improved stability.


Assuntos
Cobre , Nanoestruturas , Estabilidade Enzimática , Cobre/química , Lipase/química , Simulação de Acoplamento Molecular , Nanoestruturas/química , Enzimas Imobilizadas/química , Espectroscopia de Infravermelho com Transformada de Fourier , Íons
17.
Molecules ; 29(3)2024 Feb 03.
Artigo em Inglês | MEDLINE | ID: mdl-38338454

RESUMO

In the presented study, a variety of hybrid and single nanomaterials of various origins were tested as novel platforms for horseradish peroxidase immobilization. A thorough characterization was performed to establish the suitability of the support materials for immobilization, as well as the activity and stability retention of the biocatalysts, which were analyzed and discussed. The physicochemical characterization of the obtained systems proved successful enzyme deposition on all the presented materials. The immobilization of horseradish peroxidase on all the tested supports occurred with an efficiency above 70%. However, for multi-walled carbon nanotubes and hybrids made of chitosan, magnetic nanoparticles, and selenium ions, it reached up to 90%. For these materials, the immobilization yield exceeded 80%, resulting in high amounts of immobilized enzymes. The produced system showed the same optimal pH and temperature conditions as free enzymes; however, over a wider range of conditions, the immobilized enzymes showed activity of over 50%. Finally, a reusability study and storage stability tests showed that horseradish peroxidase immobilized on a hybrid made of chitosan, magnetic nanoparticles, and selenium ions retained around 80% of its initial activity after 10 repeated catalytic cycles and after 20 days of storage. Of all the tested materials, the most favorable for immobilization was the above-mentioned chitosan-based hybrid material. The selenium additive present in the discussed material gives it supplementary properties that increase the immobilization yield of the enzyme and improve enzyme stability. The obtained results confirm the applicability of these nanomaterials as useful platforms for enzyme immobilization in the contemplation of the structural stability of an enzyme and the high catalytic activity of fabricated biocatalysts.


Assuntos
Quitosana , Nanotubos de Carbono , Selênio , Enzimas Imobilizadas/química , Peroxidase do Rábano Silvestre/química , Quitosana/química , Estabilidade Enzimática , Íons , Concentração de Íons de Hidrogênio
18.
Bioelectrochemistry ; 157: 108663, 2024 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-38359574

RESUMO

A new type of electrochemical biosensors in a flow injection system with printed electrodes were developed and tested. A filter disc (7 mm diameter) with immobilized enzyme was placed at the printed electrode. This conception combines the advantages of biosensors with a bioreceptor at the electrode surface and systems with spatially separated enzymatic and detection parts. Filters of different composition (glass, quartz, and cellulose), thickness, porosity, and ways of binding enzyme to their surface were tested. Only covalent bonds throughout a filter-aminosilane-glutaraldehyde-enzyme chain ensured a long-time and reproducible biosensor response. The developed method of biosensor preparation has been successfully applied to enzymes glucose oxidase, laccase and choline oxidase. The dependences of peak current on detection potential, flow rate, injection volume, analyte concentration as well as biosensor lifetime and reproducibility were investigated for glucose oxidase biosensor. The sensitivity of measurements was two or more times higher than that of biosensor with a mini-reactor filled by powder with immobilized enzyme. The developed biosensor with laccase was tested by determining dopamine in the pharmaceutical infusion product Tensamin®. Results of the analysis (40.0 ± 0.7 mg mL-1, SD = 0.8 mg mL-1, RSD = 1.85 %, N = 11) show a good agreement with the manufacturer's declared value.


Assuntos
Técnicas Biossensoriais , Glucose Oxidase , Glucose Oxidase/química , Enzimas Imobilizadas/química , Reprodutibilidade dos Testes , Lacase , Técnicas Biossensoriais/métodos , Eletrodos , Glucose
19.
J Hazard Mater ; 468: 133779, 2024 Apr 15.
Artigo em Inglês | MEDLINE | ID: mdl-38367439

RESUMO

The efficient and green removal technology of refractory organics such as atrazine in water has been an important topic of research in water treatment. A novel membrane composite biocatalyst Lac-HBT-Pd/BC as prepared for the first time by co-immobilizing laccase, mediator 1-hydroxybenzotriazole (HBT) and metal Pd on functionalized bacterial cellulose (BC) to investigate the removal of atrazine and degradation of its intermediates under mild ambient conditions. It was found that atrazine could be completely degraded in 5 h by the catalysis of Lac-HBT-Pd/BC, and the removal rate of degradation intermediates from atrazine was about 85% after continuous catalysis, which achieved deep degradation of atrazine. The effect of electrochemical activity and radical stability of the membrane composite biocatalysts loaded with Pd was investigated. The possible degradation pathways were proposed by identifying and analyzing the deep degradation products of atrazine. The Lac-HBT-Pd/BC demonstrated deep degradation of atrazine and favorable reusability as well as considerable adaptability to various water qualities. This work provides an important reference for preparing new kinds of biocatalysts to degrade refractory organic pollutants in water.


Assuntos
Atrazina , Lacase , Lacase/metabolismo , Catálise , Triazóis , Enzimas Imobilizadas , Celulose
20.
ACS Sens ; 9(3): 1199-1207, 2024 Mar 22.
Artigo em Inglês | MEDLINE | ID: mdl-38372695

RESUMO

Enzymes are essential to life and indispensable in a wide range of industries (food, pharmaceutical, medical, biosensing, etc.); however, a significant shortcoming of these fragile biological catalysts is their poor stability. To address this challenge, a variety of immobilization methods have been described to enhance the enzyme's stability. These immobilization methods generally are specific to an individual enzyme or optimal for a particular application. The aim of this study is to explore the utility of porous, indicator moiety-tagged, polymeric nanocapsules (NCs) for the encapsulation of enzymes and measurement of the enzyme's substrate. As a model enzyme, glucose oxidase (GOx) is used. The GOx enzyme-loaded, fluorophore-tagged NCs were synthesized by using self-assembled surfactant vesicle templates. To show that the biological activity of GOx is preserved during entrapment, the rate of the GOx enzyme catalyzed reaction was measured. To evaluate the protective features of the porous NCs, the encapsulated GOx enzyme activity was followed in the presence of hydrolytic enzymes. During the encapsulation of GOx and the purification of the GOx-loaded NCs, the GOx activity decayed less than 10%, and up to 30% of the encapsulated GOx activity could be retained for 3-5 days in the presence of hydrolytic enzymes. In support of the potentially unique advantages of the enzyme-loaded NCs, as a proof-of-concept example, the fluorophore-tagged, GOx-loaded NCs were used for the determination of glucose in the concentration range between 18 and 162 mg/dL and for imaging the distribution of glucose concentration in imaging experiments.


Assuntos
Nanocápsulas , Enzimas Imobilizadas , Porosidade , Polímeros , Glucose , Indicadores e Reagentes , Glucose Oxidase
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...