Optimization of benzene exposure risk assessment: An integrated approach utilizing internal and external concentrations with a focus on biomarkers S-PMA & t, t-MA.

In the majority of occupational settings within China, the concentrations of benzene are observed to fall markedly below the demarcated detection thresholds. Employing traditional risk assessment models, the presence of exceptionally low airborne benzene exposure concentrations may infuse heightened degrees of uncertainty. Consequently, the necessity arises to investigate risk assessment methodologies more apt for the prevalent exposure environment among employees. In the present study, a pharmacokinetic model premised on urinary benzene metabolites (S-PMA and t, t-MA) was employed to ascertain a more precise daily airborne benzene exposure concentration per individual. This value was integrated into the linear multistage model as the 'internal exposure concentration'. In conjunction with the U.S National Environmental Protection Agency's (EPA) inhalation risk assessment model predicated on the external exposure concentration, the Singapore Ministry of Manpower's (MOM) model, and the linear multistage (LMS) model, the carcinogenic and non-carcinogenic effects of benzene were evaluated for 1781 benzene-exposed employees across 76 enterprises in Jiangsu Province. Findings suggest that in the linear multilevel model assessment, the cancer risk levels based on t, t-MA and S-PMA were higher in the printing and recording media reproduction industry, automobile manufacturing industry, general equipment manufacturing industry and the furniture manufacturing industry (median 2.842 × 10-4, 2.819 × 10-4, 2.809 × 10-4, and 2.678 × 10-4), which align more consistently with the actual benzene exposure circumstances of each industry's study participants, with overall risk levels calculated by the linear multistage model exceeding those of the EPA inhalation risk assessment model and the MOM model. This implies that the linear multistage model of internal exposure, based on the reciprocal of benzene biomarkers S-PMA and t, t-MA for airborne benzene exposure, presents enhanced sensitivity and suitability for the current occupational health risk assessment of workers. Without doubt, biomarker-based benzene exposure risk assessment emerges as the optimal choice.

Multi-functional polyvinyl alcohol/tannin acid composite films incorporated with lignin nanoparticles loaded by potassium sorbate.

The biocompatible, biodegradable and strong polyvinyl alcohol-based films have been widely investigated and used in the field of active packaging. To endow with diverse function, this paper firstly prepared lignin nanoparticles loaded with potassium sorbate (LNP@PS) as additives to exploit additional antibacterial, UV blocking, oxygen barrier, and water barrier properties. Besides, tannin acid (TA) was incorporated for compensating and further enhancing mechanical properties. Results showed that the PVA-based composite films containing 3 % LNP@PS and 5 % TA could achieve the optimal tensile strength at 74.51 MPa, water vapor permeability at 7.015·10-13·g·cm/cm2·s·Pa and oxygen permeability at 1.93 cm3/m2·24 h MPa, which was an 165 % of increase, 47 % and 112 % of reduction respectively compared to pure PVA films. Additionally, the composite films exhibited apparently superior bacteria and oxygen resistance properties evidenced by microbial infection and free radical scavenging performance. In addition, the slow-release effect of PS assisted the strawberry preservation with an extension of 3 days, which provided a promising novel route to prepare active food packaging material.

Corynebacterium glutamicum cell factory design for the efficient production of cis, cis-muconic acid.

Cis, cis-muconic acid (MA) is widely used as a key starting material in the synthesis of diverse polymers. The growing demand in these industries has led to an increased need for MA. Here, we constructed recombinant Corynebacterium glutamicum by systems metabolic engineering, which exhibit high efficiency in the production of MA. Firstly, the three major degradation pathways were disrupted in the MA production process. Subsequently, metabolic optimization strategies were predicted by computational design and the shikimate pathway was reconstructed, significantly enhancing its metabolic flux. Finally, through optimization and integration of key genes involved in MA production, the recombinant strain produced 88.2 g/L of MA with the yield of 0.30 mol/mol glucose in the 5 L bioreactor. This titer represents the highest reported titer achieved using glucose as the carbon source in current studies, and the yield is the highest reported for MA production from glucose in Corynebacterium glutamicum. Furthermore, to enable the utilization of more cost-effective glucose derived from corn straw hydrolysate, we subjected the strain to adaptive laboratory evolution in corn straw hydrolysate. Ultimately, we successfully achieved MA production in a high solid loading of corn straw hydrolysate (with the glucose concentration of 83.56 g/L), resulting in a titer of 19.9 g/L for MA, which is 4.1 times higher than that of the original strain. Additionally, the glucose yield was improved to 0.33 mol/mol. These provide possibilities for a greener and more sustainable production of MA.

Effects of potassium sorbate on systemic inflammation and gut microbiota in normal mice: A comparison of continuous intake and washout period.

Potassium sorbate (PS) is a widely used food preservative in the field of food industry. However, the effects of continuous intake and washout period of PS on host health are still unclear. In this study, to investigate long-term effect and after-effect of different concentrations and time points of PS, healthy mice were orally exposed to 150 mg/kg, 500 mg/kg and 1000 mg/kg of PS for 10 weeks, and washout treatment for another 5 weeks, respectively. The results indicated that PS intake for 10 weeks had no obvious effects on organs and adipose tissue, nor did it noteworthily interfere with glucolipid metabolism in the serum. However, it caused inflammatory cell infiltration in the liver, increased serum interleukin (IL)-1ß level, changed abundances of gut microbiota but failed to promote the production of short chain fatty acids in the gut. After washout period for 5 weeks, liver inflammation and IL-1ß level were decreased, and gut environment developed towards a healthier condition. Specifically, PS washout significantly increased abundance of Lachnospiraceae_NK4A136_group and the production of isobutyric acid. This study confirmed washout period eliminated negative effects from continuous intake of PS, which provided positive evidence for its safety.

Utilizing functional genomics in Saccharomyces cerevisiae to characterize food preservative compounds: A pilot study.

Chemical preservatives are ubiquitously used to suppress the growth of or kill microorganisms across numerous industries, including the food industry. Utilizing yeast functional genomic techniques, genes and their functions can be observed at a genomic scale to elucidate how environmental stressors (e.g., chemical preservatives) impact microbial survival. These types of chemical genomics approaches can reveal genetic mutations that result in preservative resistance or sensitivity, assist in identification of preservative mechanism of action, and can be used to compare different preservatives for rational design of preservative mixtures. In this proof-of-concept study, we performed deletion and high-copy genetic expression screens to identify mutants that confer drug resistance to sodium benzoate, potassium sorbate, rosemary extract, and Natamax. By observing overlapping mutant genes between genetic screens, we were able to identify functional overlap between chemical preservatives and begin to explain mechanisms of action for these compounds.

Engineering Novosphingobium aromaticivorans to produce cis,cis-muconic acid from biomass aromatics.

The platform chemical cis,cis-muconic acid (ccMA) provides facile access to a number of monomers used in the synthesis of commercial plastics. It is also a metabolic intermediate in the ß-ketoadipic acid pathway of many bacteria and, therefore, a current target for microbial production from abundant renewable resources via metabolic engineering. This study investigates Novosphingobium aromaticivorans DSM12444 as a chassis for the production of ccMA from biomass aromatics. The N. aromaticivorans genome predicts that it encodes a previously uncharacterized protocatechuic acid (PCA) decarboxylase and a catechol 1,2-dioxygenase, which would be necessary for the conversion of aromatic metabolic intermediates to ccMA. This study confirmed the activity of these two enzymes in vitro and compared their activity to ones that have been previously characterized and used in ccMA production. From these results, we generated one strain that is completely derived from native genes and a second that contains genes previously used in microbial engineering synthesis of this compound. Both of these strains exhibited stoichiometric production of ccMA from PCA and produced greater than 100% yield of ccMA from the aromatic monomers that were identified in liquor derived from alkaline pretreated biomass. Our results show that a strain completely derived from native genes and one containing homologs from other hosts are both capable of stoichiometric production of ccMA from biomass aromatics. Overall, this work combines previously unknown aspects of aromatic metabolism in N. aromaticivorans and the genetic tractability of this organism to generate strains that produce ccMA from deconstructed biomass.IMPORTANCEThe production of commodity chemicals from renewable resources is an important goal toward increasing the environmental and economic sustainability of industrial processes. The aromatics in plant biomass are an underutilized and abundant renewable resource for the production of valuable chemicals. However, due to the chemical composition of plant biomass, many deconstruction methods generate a heterogeneous mixture of aromatics, thus making it difficult to extract valuable chemicals using current methods. Therefore, recent efforts have focused on harnessing the pathways of microorganisms to convert a diverse set of aromatics into a single product. Novosphingobium aromaticivorans DSM12444 has the native ability to metabolize a wide range of aromatics and, thus, is a potential chassis for conversion of these abundant compounds to commodity chemicals. This study reports on new features of N. aromaticivorans that can be used to produce the commodity chemical cis,cis-muconic acid from renewable and abundant biomass aromatics.

Molecular docking study of frequently used food additives for selected targets depending on the chromosomal abnormalities they cause.

Food additives (FAs) (flavor enhancers, sweeteners, etc.) protect foods during storage and transportation, making them attractive to consumers. Today, while the desire to access natural foods is increasing, the chemicals added to foods have started to be questioned. In this respect, genotoxicity tests have gained importance. Studies show that some food additives may have genotoxic risks. Previous studies carried out in our laboratory also revealed genotoxic effects of Monopotassium glutamate (MPG), Monosodium glutamate (MSG), Magnesium diglutamate (MDG) as flavor enhancers; Potassium benzoate (PB), Potassium sorbate (PS), Sodium benzoate (SB), Sodium sorbate (SS) as preservatives; Acesulfame potassium (ACE-K), Xylitol (XYL) as sweeteners. In this study, we determined the interactions of these food additives with ATM and p53 proteins, which are activated in the cell due to genotoxic effects, and with DNA by employing the molecular docking method for the first time. Among the food additives, SB (-4.307) for ATM, XYL (-4.629) for p53, and XYL (-4.927) for DNA showed the highest affinity. Therefore, flexible docking (IFD) scores were determined for SB, XYL, and MDG from flavor enhancers. The potential binding modes of the food additives to target molecules' possible inhibition mechanisms were determined by molecular docking. Thus, new information was obtained to show how these additives cause chromosomal abnormalities.

Using labelling information to evaluate the distribution of food additives in products marketed in Brazil.

Food additives are ingredients added to food and beverages in order to modify physical, chemical, biological or sensory characteristics, contributing to the development of products that are safer and more convenient and attractive. Although they are widely used by food industries, little is known about the distribution of the food additives currently employed in products marketed in Brazil. Therefore, this study aimed to use labelling information of commercial food and beverages in order to identify the substances currently used by the Brazilian industry. For this, 3300 labels of 426 food items described in the Personal Food Consumption module of the Household Budget Survey (POF 2017/2018) of the Brazilian Institute of Geography and Statistics (IBGE) were searched on websites of supermarket chains and food companies as well as by visits to commercial establishments. According to the ingredient lists of the evaluated samples, 186 distinct food additives were identified. The average number of declared substances per product was between 4 and 5, with most of the labels indicating the presence of 2 or 3 additives. Considering the identified substances, 93 had an Acceptable Daily Intake (ADI) not specified or not limited and 89 were additives with a numerical ADI. Citric acid and lecithin were the most frequent substances with ADI not specified or not limited while potassium sorbate and pentasodium triphosphate were the most frequent food additives with numerical ADI. The most frequent combinations found in the evaluated samples were of potassium sorbate and citric acid, and also sodium nitrite, sodium erythorbate, and sodium diphosphate. This study demonstrates the distribution of food additives in products marketed in Brazil, allowing the creation of a comprehensive and unprecedented database, which will contribute to the evaluation of usage trends and future exposure studies for health risk assessment.

Screening non-conventional yeasts for acid tolerance and engineering Pichia occidentalis for production of muconic acid.

Saccharomyces cerevisiae is a workhorse of industrial biotechnology owing to the organism's prominence in alcohol fermentation and the suite of sophisticated genetic tools available to manipulate its metabolism. However, S. cerevisiae is not suited to overproduce many bulk bioproducts, as toxicity constrains production at high titers. Here, we employ a high-throughput assay to screen 108 publicly accessible yeast strains for tolerance to 20 g L-1 adipic acid (AA), a nylon precursor. We identify 15 tolerant yeasts and select Pichia occidentalis for production of cis,cis-muconic acid (CCM), the precursor to AA. By developing a genome editing toolkit for P. occidentalis, we demonstrate fed-batch production of CCM with a maximum titer (38.8 g L-1), yield (0.134 g g-1 glucose) and productivity (0.511 g L-1 h-1) that surpasses all metrics achieved using S. cerevisiae. This work brings us closer to the industrial bioproduction of AA and underscores the importance of host selection in bioprocessing.

Benzoates and in situ formed benzene in food supplements and risk assessment.

Upward trend in the use of food supplements urged the assessment of their safety. Eighty-eight liquid herbal supplements collected in Novi Sad (Serbia) in 2018 (36 samples) and 2021 (52 samples) were analysed for the presence of benzoates and sorbates (HPLC-UV) and benzene (HS-GC/MS). Benzoic acid varied from 599 to 9253 mg/kg and sorbic acid between 185 and 1658 mg/kg. The acceptable daily intake of sorbic acid was not reached, but in case of benzoic acid, it was exceeded by 5.3% of the samples. The presence of benzene was confirmed in 41.2% of benzoate preserved supplements (0.9-51.7 µg/kg). Benzene exposure revealed no health concern: maximum hazard quotients ranged from 0.39% (toddlers) to 0.84% (adolescents); minimum margins of exposure were between 35,680 (adolescents) and 77,419 (toddlers); estimates of lifetime cancer risk did not reach one extra cancer case per 100 000 persons. However, measures to mitigate benzene presence in food should be considered.

Inactivation of Bacillus subtilis spores by a combination of high-pressure thermal treatment and potassium sorbate.

Combining High-pressure Thermal Treatment (HPTT) and Potassium Sorbate (PS) may have a stronger spore inactivation effect. Spores of Bacillus subtilis were subjected to HPTT at 600 MPa-65 °C/75 °C and a combination of HPTT and PS of 0.1% and 0.2% concentrations. After these treatments, different procedures and techniques were employed to investigate the spore's inactivation. The results revealed that 4.92 ± 0.05 log spores were inactivated after treatment at 600 MPa-75 °C, while 5.97 ± 0.09 log spores were inactivated when the HPTT treatment was combined with 0.2% PS. Changes in permeability of the spore's inner membrane were characterized by OD600 value and release rates of nucleic acids, protein, and dipicolinic acid (DPA). Compared with HPTT treatment at 600 MPa-75 °C, the OD600 value of spores decreased further by about 50% after treatment with a combination of HPTT and 0.2% PS. Additionally, the combined treatments resulted in a significant increase in the OD260 and OD280 values, as well as the DPA release. The spore size analysis indicated a significant decrease in the size of spores treated with a combination of HPTT at 600 MPa-75 °C and PS of 0.2% concentration. Furthermore, the flow cytometry analysis and confocal laser scanning microscopy (CLSM) analysis indicated that the inner membrane damage of spores was higher after combined treatments than that after HPTT treatment alone. A significant reduction was also found in the Na+/K+-ATPase activity after the combined treatments. Also, the FTIR analysis revealed that the combined treatments resulted in significant adverse changes in the spores' inner membrane, cell wall, cortex, and nucleic acid. Therefore, the combination of HPTT and PS has a stronger inactivation effect and can be suggested as a promising strategy for the inactivation of Bacillus subtilis spores.

Evaluating the potential of natural product combinations with sorbic acid for improving preservative action against food-spoilage yeasts.

Fungal control methods commonly involve the use of antifungals or preservatives, which can raise concerns about broader effects of these stressors on non-target organisms, spread of resistance and regulatory hurdles. Consequently, control methods enabling lower usage of such stressors are highly sought, for example chemical combinations that synergistically inhibit target-organisms. Here, we investigated how well such a principle extends to improving efficacy of an existing but tightly controlled food preservative, sorbic acid. A screen of ∼200 natural products for synergistic fungal inhibition in combinations with sorbic acid, in either 2% or 0.1% (w/v) glucose to simulate high or reduced-sugar foods, did not reveal reproducible synergies in either of the spoilage yeast species Saccharomyces cerevisiae or Zygosaccharomyces bailii. Potentially promising screen candidates (e.g. lactone parthenolide, ethyl maltol) or a small additional panel of rationally-selected compounds (e.g. benzoic acid) all gave Fractional Inhibitory Concentration Indices (FICI) ≥ 0.5 in combinations with sorbic acid, corroborating absence of synergy in either glucose condition (although FICI values did differ between the glucose conditions). Synergies were not achieved either in a tripartite combination with screen candidates or in a soft-drink formulation as matrix. In previous work with other stressors synergy 'hits' have been comparatively frequent, suggesting that sorbic acid could be unusually resistant to forming synergies with other potential inhibitors and this may relate to the weak acid's known multifactorial inhibitory-actions on cells. The study highlights a challenge in developing appropriate natural product or other chemical combinations applicable to food and beverage preservation.

Simultaneous determination of benzoic acid and sorbic acid in non-alcoholic beverages by a validated HS-GC-MS method with reduced waste.

A headspace gas chromatography-mass spectrometry (HS-GC-MS) method is presented for the simultaneous determination of benzoic acid (BA) and sorbic acid (SoA) in different types of non-alcoholic beverages. Sensitive and reliable results were achieved together with minimising consumption of reagents and samples. Salicylic acid (SalA) was used as internal standard (IS). It was necessary to derivatise BA, SoA and SalA to their methyl esters for HS-GC-MS measurement and extensive optimisation studies for in-vial derivatisation were carried out on the temperature, incubation time, injection time of the loopless HS, as well as on the concentration of sulphuric acid used as a catalyst. Validation studies carried out under optimum conditions after mixing 50 µL of sample and IS solutions with 200 µL of 4.5 M sulphuric acid in 22 mL HS vials revealed that the developed method was both very precise (relative standard deviation < 5%) and accurate (average recovery%: 101.0% for BA and 100.4% for SoA). The validated method was applied to a wide range of beverage types and the results compared with the relevant regulation and product label declarations.

Delignification of switchgrass for xylo-oligosaccharides production using sorbic acid hydrolysis.

Organic acid as a class of hydrolysis catalysts shows great potential in the production of xylo-oligosaccharides (XOS) from lignocelluloses. However, sorbic acid (SA) hydrolysis for XOS production from lignocellulose has not been reported and it was still unclear how lignin removal affected XOS production. Herein, two factors affecting the XOS production from switchgrass by SA hydrolysis were explored: hydrolysis severity factor (Log R0) and lignin removal. Benefiting from the lignin removal (58.4%) in switchgrass, a desired XOS yield of 50.8% with low by-products was obtained from delignified switchgrass by 3% SA hydrolysis at Log R0 = 3.84. Under these conditions, 92.1% of glucose was obtained by cellulase hydrolysis with Tween 80 addition. From a mass balance perspective, 10.3 g of XOS and 23.7 g of glucose could be produced from 100 g switchgrass. This work proposed a novel strategy for XOS and monosaccharides production from delignified switchgrass.

Evaluation of Sodium Benzoate and Potassium Sorbate Preservative Concentrations in Different Sauce Samples in Urmia, Iran.

Sodium benzoate and potassium sorbate are relatively common preservatives used in a wide range of foods including flavoring products like sauces. The potential health risks arising from these preservatives along with the high-consumption rate of these flavoring products worldwide highlight the importance of the quality and safety assurance of these products. So, this study aimed to evaluate the concentrations of these two common preservatives (i.e., sodium benzoate and potassium sorbate) in different sauce samples, including mayonnaise, salad dressings, Caesar sauce, Italian dressing, Ranch dressing, French dressing, using high-performance liquid chromatography (HPLC) and to compare them with the acceptable level of Codex standard. For this purpose, 49 samples, including three to five samples of each type of different brands of sauce samples, were randomly collected from supermarkets in Urmia, Iran. Based on the results, the mean concentrations ± standard deviation of sodium benzoate and potassium sorbate in the collected samples were found to be 249.9 ± 157 and 158.0 ± 131 ppm, respectively, which were lower than the general standard of the Codex Alimentarius and the European legislation. Due to the importance of hazardous side effects of these preservatives for consumers, regular and accurate evaluation of these preservatives in sauces as highly consumed food products is still recommended for consumer safety.

Overcoming lemon postharvest molds caused by Penicillium spp. multiresistant isolates by the application of potassium sorbate in aqueous and wax treatments.

Penicillium digitatum and Penicillium italicum are the main causal agents of postharvest diseases in lemon. Over the last decades, the appearance of isolates resistant to the main commercial fungicides has been considered one of the most serious problems for the citrus industry. In this work, potassium sorbate (KS) was evaluated as an alternative to chemical fungicides to control postharvest diseases caused by Penicillium isolates resistant to imazalil, thiabendazol, and pyrimethanil. In vitro assays showed that 1% KS inhibited conidia germination and mycelial growth of sensitive and resistant P. digitatum and P. italicum isolates, being this effect stronger at pH 5 than at pH 9. In curative treatments, the immersion of inoculated lemons in 1% KS aqueous solution for 30 s reduced green and blue molds incidences by around 80%. No wound protection effect was observed when wounded lemons were immersed in 3% salt solution before inoculation. Noteworthy, the inclusion of KS in a commercial wax coating effectively controlled green and blue molds, even in decays caused by fungicide resistance isolates. Together, results encourage the use of KS in lemon postharvest treatments to contribute to the management of resistant strains, which represent a major challenge in packinghouses worldwide. PRACTICAL APPLICATION: The use of KS in citrus postharvest treatments would help producers to reduce spoilage caused by Penicillium fungicide-resistant strains. The inclusion of this generally recognized as safe compound in wax coatings improves its persistence on the fruit surface, keeping product quality during long-term overseas transport. In sum, KS constitutes an affordable and eco-friendly option for controlling postharvest molds in lemon fruit.

The Influence of Heteroresistance on Minimum Inhibitory Concentration, Investigated Using Weak-Acid Stress in Food Spoilage Yeasts.

Populations of microbial cells may resist environmental stress by maintaining a high population-median resistance (IC50) or, potentially, a high variability in resistance between individual cells (heteroresistance); where heteroresistance would allow certain cells to resist high stress, provided the population was sufficiently large to include resistant cells. This study sets out to test the hypothesis that both IC50 and heteroresistance may contribute to conventional minimal inhibitory concentration (MIC) determinations, using the example of spoilage-yeast resistance to the preservative sorbic acid. Across a panel of 26 diverse yeast species, both heteroresistance and particularly IC50 were positively correlated with predicted MIC. A focused panel of 29 different isolates of a particular spoilage yeast was also examined (isolates previously recorded as Zygosaccharomyces bailii, but genome resequencing revealing that several were in fact hybrid species, Z. parabailii and Z. pseudobailii). Applying a novel high-throughput assay for heteroresistance, it was found that IC50 but not heteroresistance was positively correlated with predicted MIC when considered across all isolates of this panel, but the heteroresistance-MIC interaction differed for the individual Zygosaccharomyces subspecies. Z. pseudobailii exhibited higher heteroresistance than Z. parabailii whereas the reverse was true for IC50, suggesting possible alternative strategies for achieving high MIC between subspecies. This work highlights the limitations of conventional MIC measurements due to the effect of heteroresistance in certain organisms, as the measured resistance can vary markedly with population (inoculum) size. IMPORTANCE Food spoilage by fungi is a leading cause of food waste, with specialized food spoilage yeasts capable of growth at preservative concentrations above the legal limit, in part due to heteroresistance allowing small subpopulations of cells to exhibit extreme preservative resistance. Whereas heteroresistance has been characterized in numerous ecological contexts, measuring this phenotype systematically and assessing its importance are not encompassed by conventional assay methods. The development here of a high-throughput method for measuring heteroresistance, amenable to automation, addresses this issue and has enabled characterization of the contribution that heteroresistance may make to conventional MIC measurements. We used the example of sorbic acid heteroresistance in spoilage yeasts like Zygosaccharomyces spp., but the approach is relevant to other fungi and other inhibitors, including antifungals. The work shows how median resistance, heteroresistance, and inoculum size should all be considered when selecting appropriate inhibitor doses in real-world antimicrobial applications such as food preservation.

Laboratory evaluations of biodegradable boric acid hydrogel baits for the control of Argentine ant (Hymenoptera: Formicidae).

Due to their mutualistic relationship with plant pests, the Argentine ant is considered a major pest in subtropical fruit orchards and vineyards. Besides insecticide sprays, liquid baiting has been demonstrated as an effective method to suppress the Argentine ant populations. To improve the economic feasibility of liquid baiting, hydrogel materials have been recently tested as a carrier for liquid baits containing various insecticidal active ingredients. Here, we tested boric acid as a toxicant in the aqueous sugar bait delivered in a biodegradable calcium alginate hydrogel. Laboratory tests demonstrated that boric acid (1%) liquid bait incorporated in the calcium alginate hydrogel effectively killed Argentine ant workers. Potassium sorbate (0.25%) added to the liquid bait as a preservative did not impact the efficacy of boric acid even though it significantly reduced the degree of swelling of the hydrogel beads in the bait solution. Testing with 2-month-old bait suggested that long-term storage might impact bait efficacy even with potassium sorbate preservative.

A Reinvestigation of the Role of the Sorbic Acid Tail on the Antibacterial and Anti-Tuberculosis Properties of Moiramide B.

Due to worldwide increasing resistances, there is a considerable need for antibacterial compounds with modes of action not yet realized in commercial antibiotics. One such promising structure is the acetyl-CoA carboxylase (ACC) inhibitor moiramide B which shows strong antibacterial activity against gram-positive bacteria such as Bacillus subtilis and weaker activities against gram-negative bacteria. However, the narrow structure-activity relationship of the pseudopeptide unit of moiramide B represents a formidable challenge for any optimization strategy. In contrast, the lipophilic fatty acid tail is considered an unspecific vehicle responsible only for the transport of moiramide into the bacterial cell. Here we show that the sorbic acid unit, in fact, is highly relevant for ACC inhibition. A hitherto undescribed sub-pocket at the end of the sorbic acid channel binds strongly aromatic rings and allows the development of moiramide derivatives with altered antibacterial profiles including anti-tubercular activity.

Efficacy evaluation of some fumigants against Fusarium oxysporum and enhancement of tomato growth as elicitor-induced defense responses.

Fusarium wilt, the most serious soil-borne pathogen, is a serious problem for tomato production worldwide. The presented study evaluated the antifungal activity against Fusarium oxysporum f. sp. lycopersici in vitro and in vivo for nine fumigants. In addition, the research examined the possibility of enhancing the growth of tomato plants in order to increase resistance against this disease by using four chemical inducers. The results indicated that at 20 mg/L, the radial growth of the pathogen was inhibited 100% by formaldehyde and > 80% by phosphine. Among the essential oils investigated, neem oil was the most effective, however, it only achieved 40.54% at 500 mg/L. The values of EC50 for all fumigants, except dimethyl disulfide (DMDS) and carbon disulfide (CS2), were lower than those for thiophanate-methyl. Phosphine was the highest efficient. The elicitors can be arranged based on their effectiveness, gibberellic acid (GA3) > sorbic acid > cytokinin (6-benzylaminopurine) > indole-3-butyric acid. The change in root length, fresh weight, and dry weight was greater with soil drench than with foliar application. The fumigant generators formaldehyde, phosphine and 1,4-dichlorobenzene and bio-fumigants citrus and neem oils as well as elicitors gibberellic and sorbic acid could be one of the promising alternatives to methyl bromide against Fusarium oxysporum as an important component of integrated management of Fusarium wilt.