Preparation of Healthy Single Neuron or Astrocyte Suspension from Adult Mouse Brain for RNA-seq.

Single-cell RNA sequencing (scRNA-seq) has been widely applied in neuroscience research, enabling the investigation of cellular heterogeneity at the transcriptional level, the characterization of rare cell types, and the detailed analysis of the stochastic nature of gene expression. Isolation of single nerve cells in good health, especially from the adult rodent brain, is the most difficult and critical process for scRNA-seq. Here, we describe methods to optimize protease digestion of brain slices, which enable yield of millions of cells in good health from the adult brain.

Physical-chemical Stability of the Extemporaneous Paracetamol Oral Suspension in Puccini Base.

This study describes a new method for the preparation of extemporaneous paracetamol-based suspensions for pediatric and adult patients. This method allows the preparation of extemporaneous suspensions up to concentrations of 50 mg/mL by using a liquid base, named "Puccini". A high-pressure liquid chromatographic method was developed and validated for the determination of chemical stability of paracetamol when the formulations were stored at 4°C and 25°C. The chemical stability of the active pharmaceutical ingredient in the base was demonstrated for more than 90 days. Visual analyses of the formulations showed a phenomenon of precipitation at both storage temperatures, but the simple agitation of the formulations before its use re-established the formation of homogeneous suspensions.

Non-destructive Raman Method Development for Quantifying Active Pharmaceutical Ingredient in an Oral Suspension Through Plastic Dosing Syringes.

For liquid drug products, e.g., solutions or suspensions for oral or parenteral dosing, stability needs to be demonstrated in primary packaging during storage and in dosing devices during in-use periods per quality guidelines from the International Conference on Harmonisation (ICH) and the European Agency for the Evaluation of Medicinal Products (EMEA). One aspect of stability testing for liquid drug products is in-use stability, which typically includes transferring the liquid samples into another container for further sample preparation with extraction diluent and necessary agitation. Samples are then analyzed with traditional chromatography methods, which are laborious, prone to human errors, and time-consuming, especially when this process needs to be repeated multiple times during storage and in-use periods. Being able to analyze the liquid samples non-destructively would significantly improve testing efficiency. We investigated different Raman techniques, including transmission Raman (TRS) and back scatter Raman with a non-contact optic (NCO) probe, as alternative non-destructive tools to the UHPLC method for API quantitation in in-use liquid samples pulled into plastic dosing syringes. The linearity of the chemometric methods for these two techniques was demonstrated by cross-validation sample sets at three levels over an API concentration range of 60 to 80 mg/mL. The accuracy of the chemometric models was demonstrated by the accurate prediction of the API concentrations in independent samples from four different pilot plant batches manufactured at different sites. Both techniques were successful in measuring a signal through a plastic oral dosing syringe, and predicting the suspension API concentration to within 4% of the UHPLC-measured value. For future work, there are opportunities to improve the methodology by exploring additional probes or to expand the range of applications by using different sample presentations (such as prefilled syringes) or formulation matrices for solutions and suspensions.

Evaluation of the Simple Suspension Method for Oral Anticancer Drugs.

The simple suspension method (SSM) involves administering tablets or capsules using a tube after disintegration and suspension in hot water without crushing or opening the capsule. Particularly, for anticancer drugs, it is an excellent method of administration that reduces the risk of exposure during dispensing. In contrast, information on SSM for individual drugs is insufficient. Anticancer drugs present a therapeutic challenge because their information is limited. We investigated whether SSM is possible with 36 anticancer drugs. Furthermore, we examined the pH of the suspension of these drugs, for which no information on SSM is available. We found that suspension was possible for 24 of the 36 drugs. Furthermore, the pH of the suspension was measured, which provided important information when considering dissolution solutions other than hot water. Little changes in the pH were observed before or after passing through the tube. The results of this study may improve medication adherence in patients with cancer experiencing dysphagia.

Self-enhanced mobility enables vortex pattern formation in living matter.

Ranging from subcellular organelle biogenesis to embryo development, the formation of self-organized structures is a hallmark of living systems. Whereas the emergence of ordered spatial patterns in biology is often driven by intricate chemical signalling that coordinates cellular behaviour and differentiation1-4, purely physical interactions can drive the formation of regular biological patterns such as crystalline vortex arrays in suspensions of spermatozoa5 and bacteria6. Here we discovered a new route to self-organized pattern formation driven by physical interactions, which creates large-scale regular spatial structures with multiscale ordering. Specifically we found that dense bacterial living matter spontaneously developed a lattice of mesoscale, fast-spinning vortices; these vortices each consisted of around 104-105 motile bacterial cells and were arranged in space at greater than centimetre scale and with apparent hexagonal order, whereas individual cells in the vortices moved in coordinated directions with strong polar and vortical order. Single-cell tracking and numerical simulations suggest that the phenomenon is enabled by self-enhanced mobility in the system-that is, the speed of individual cells increasing with cell-generated collective stresses at a given cell density. Stress-induced mobility enhancement and fluidization is prevalent in dense living matter at various scales of length7-9. Our findings demonstrate that self-enhanced mobility offers a simple physical mechanism for pattern formation in living systems and, more generally, in other active matter systems10 near the boundary of fluid- and solid-like behaviours11-17.

Culture of Hoffa fat pad mesenchymal stem/stromal cells on microcarrier suspension in vertical wheel bioreactor for extracellular vesicle production.

BACKGROUND: Mesenchymal stromal cells (MSCs) are increasingly employed in regenerative medicine approaches for their immunomodulatory and anti-inflammatory properties, which are encoded in their secretome including extracellular vesicles (EVs). The Hoffa fat pad (HFP) located infrapatellarly harbours MSCs that could assist in tissue homeostasis in osteoarthritic joints. Intraarticular injection therapies based on blood products could modulate the populations of released HFP-MSC-EVs in a quantitative manner. METHODS: To obtain amounts of HFP-MSC-derived EVs that allow pre-clinical evaluation, suitable EV production systems need to be developed. This work investigates the release of EVs from primary HFP-MSCs cultivated in a 3D environment using microcarrier suspension culture in a vertical wheel bioreactor in comparison to conventional 2D culture. To simulate an intraarticular blood product therapy, cultures were treated with citrate-anticoagulated platelet-rich plasma (CPRP) or hyperacute serum (hypACT) before EV collection. HFP-MSC-EVs are enriched via ultrafiltration and characterised via Western Blot, nanoparticle tracking analysis in scatter as well as fluorescence mode. EV potency was determined via RT-qPCR analysing the expression of type II and X collagen (COL2 and COL10), as well as inducible nitric oxide synthase (iNOS) in primary OA chondrocytes. RESULTS: Blood product supplementation elevated HFP-MSC metabolic activity as determined via XTT assay over the course of 14 days. 3D culture resulted in a roughly 100-fold EV yield compared to 2D culture and elevated number of EVs released per cell. Total protein content correlated with the EV concentration. While typical EV marker proteins such as CD9, CD63 or Alix were detected in total protein extracts, CD9 and CD73 colocalised on individual EVs highlighting their cell origin. The type of blood product treatment did not affect the size or concentration of EVs obtained from HFP-MSCs. Assessing potency of 3D culture EVs in comparison to 2D EVs revealed superior biological activity with regard to inhibition of inflammation, inhibition of chondrocyte hypertrophy and induction of cartilage-specific ECM production. CONCLUSIONS: HFP-MSCs proliferate in presence of human blood products indicating that animal serum in culture media can be avoided in the future. The culture of HFP-MSCs in the employed bioreactor was successfully used to generate quantities of EVs that could allow evaluation of HFP-MSC-EV-mediated effects in pre-clinical settings. In addition, EV potency of 3D EVs is superior to EVs obtained in conventional 2D culture flasks.

Systematic cryopreservation study of cardiac myoblasts in suspension.

H9c2 myoblasts are a cell line derived from embryonic rat heart tissue and demonstrate the ability to differentiate to cardiac myotubes upon reduction of the serum concentration (from 10% to 1%) and addition of all-trans retinoic acid in the growth medium. H9c2 cells are increasingly being used as an easy-to-culture proxy for some functions of cardiomyocytes. The cryobiology of cardiac cells including H9c2 myoblasts has not been studied as extensively as that of some cell types. Consequently, it is important to characterize the cryobiological response and systematically develop well-optimized cryopreservation protocols for H9c2 cells to have optimal and consistent viability and functionality after thaw for high quality studies with this cell type. In this work, an interrupted slow cooling protocol (graded freezing) was applied to characterize H9c2 response throughout the cooling profile. Important factors that affect the cell response were examined, and final protocols that provided the highest post-thaw viability are reported. One protocol uses the common cryoprotectant dimethyl sulfoxide combined with hydroxyethyl starch, which will be suitable for applications in which the presence of dimethyl sulfoxide is not an issue; and the other protocol uses glycerol as a substitute when there is a desire to avoid dimethyl sulfoxide. Both protocols achieved comparable post-thaw viabilities (higher than 80%) based on SYTO 13/GelRed flow cytometry results. H9c2 cells cryopreserved by either protocol showed ability to differentiate to cardiac myotubes comparable to fresh (unfrozen) H9c2 cells, and their differentiation to cardiac myotubes was confirmed with i) change in cell morphology, ii) expression of cardiac marker troponin I, and iii) increase in mitochondrial mass.

Bottom-up production of injectable itraconazole suspensions using membrane technology.

Bottom-up production of active pharmaceutical ingredient (API) crystal suspensions offers advantages in surface property control and operational ease over top-down methods. However, downstream separation and concentration pose challenges. This proof-of-concept study explores membrane diafiltration as a comprehensive solution for downstream processing of API crystal suspensions produced via anti-solvent crystallization. It involves switching the residual solvent (N-methyl-2-pyrrolidone, NMP) with water, adjusting the excipient (d-α-Tocopherol polyethylene glycol 1000 succinate, TPGS) quantity, and enhancing API loading (solid concentration) in itraconazole crystal suspensions. NMP concentration was decreased from 9 wt% to below 0.05 wt% (in compliance with European Medicine Agency guidelines), while the TPGS concentration was decreased from 0.475 wt% to 0.07 wt%. This reduced the TPGS-to-itraconazole ratio from 1:2 to less than 1:50 and raised the itraconazole loading from 1 wt% to 35.6 wt%. Importantly, these changes did not adversely affect the itraconazole crystal stability in suspension. This study presents membrane diafiltration as a one-step solution to address downstream challenges in bottom-up API crystal suspension production. These findings contribute to optimizing pharmaceutical manufacturing processes and hold promise for advancing the development of long-acting API crystal suspensions via bottom-up production techniques at a commercial scale.

Phospholipid-derived Au and Au-Cu suspensions as efficient peroxide and borohydride activators for organic molecules degradation: Performance and sustainable catalytic mechanism.

In the contemporary context, executing light-oxidant- and reductant-driven reactions in solution-phase processes remains challenging mainly due to the lack of general tools for understanding the reactive potential of nano-functional catalysts. In this study, dual-active nanometals (Au and Cu doped with Au) capped within soy lecithin (SL), were developed and characterized, combining flexibility with the catalytic advantages and stability of liquid-phase catalysts. The as-synthesized SL-Au (LG) and SL-Au-Cu (LGC) catalysts were efficiently degraded rhodamine B (RB, 100%) in the presence of H2O2 under light irradiation (350 W lamp) at wide pH range (3-7) within 4.5 h and p-nitrophenol (p-NP, >90% degradation at pH 7) in the presence of NaBH4 under normal stirring with slower kinetics (∼72 h). RB degradation followed a pseudo-second-order kinetic model with a higher r2, and p-NP degradation followed first-order kinetics. The active sites embedded within the structural order of SL arrangement displayed elevated catalytic activity, which was further enhanced by the movement of intermediate/excited states and charged elements within the metal suspended in the phospholipid (LG and LGC). The self-regulating tunability of the physicochemical characteristics of these catalysts provides a convenient and generalizable platform for the transformation of modern dual-active (redox) catalysts into dynamic homogeneous equivalents.

Multi-population dissolution in confined active fluids.

Autonomous out-of-equilibrium agents or cells in suspension are ubiquitous in biology and engineering. Turning chemical energy into mechanical stress, they generate activity in their environment, which may trigger spontaneous large-scale dynamics. Often, these systems are composed of multiple populations that may reflect the coexistence of multiple species, differing phenotypes, or chemically varying agents in engineered settings. Here, we present a new method for modeling such multi-population active fluids subject to confinement. We use a continuum multi-scale mean-field approach to represent each phase by its first three orientational moments and couple their evolution with those of the suspending fluid. The resulting coupled system is solved using a parallel adaptive level-set-based solver for high computational efficiency and maximal flexibility in the confinement geometry. Motivated by recent experimental work, we employ our method to study the spatiotemporal dynamics of confined bacterial suspensions and swarms dominated by fluid hydrodynamic effects. Our in silico explorations reproduce observed emergent collective patterns, including features of active dissolution in two-population active-passive swarms, with results clearly suggesting that hydrodynamic effects dominate dissolution dynamics. Our work lays the foundation for a systematic characterization and study of collective phenomena in natural or synthetic multi-population systems such as bacteria colonies, bird flocks, fish schools, colloid swimmers, or programmable active matter.

Preparation and in Vitro Characterization of Fatty-Acid Modified Pirarubicin Nanosuspensions Stabilized by Albumin.

Pirarubicin (THP) shows more rapid intracellular uptake, more effective antitumor activity, and less cardiac toxicity, compared to doxorubicin. However, THP is distributed to both tumor and normal tissues indiscriminately. This study aimed to develop a nanosuspension to deliver THP to tumor tissues more efficiently. Fatty-acid-modified THPs (FA-THPs; octanoic acid, dodecanoic acid, palmitic acid-THPs) were synthesized to increase the hydrophobicity of THP. Nanosuspensions of these FA-THPs were then prepared using an antisolvent precipitation technique. Among the FA-THPs, the most efficiently drug-loaded nanosuspension was obtained from palmitic acid-THP (pal-THP) using an aqueous antisolvent containing bovine serum albumin as a stabilizer. The pal-THP nanoparticles in the nanosuspension were confirmed to be of optimal size (100-125 nm) for delivery to tumor tissues using dynamic light scattering and transmission electron microscopy. The pal-THP nanosuspension showed cytotoxicity in colon 26 cells. The nanosuspension was shown to disintegrate in the presence of surfactants such as lecithin, liberating pal-THP, which was converted to free THP in acidic media. It is therefore proposed that pal-THP nanoparticles that reach tumor cells after intravenous administration would exert antitumor effect by liberating pal-THP (i.e., disintegration of nanoparticles by the interaction with cell membrane), followed by the release of free THP in the acidic milieu of tumor cells. These findings indicate that FA-THP nanosuspensions, particularly pal-THP nanosuspension, hold promise as a candidate for cancer treatment. However, further in vivo studies are necessary.

Nanosuspension-Based Drug Delivery Systems for Topical Applications.

Nanosuspensions have garnered recent attention as a promising strategy for mitigating the bioavailability challenges of hydrophobic drugs, particularly those characterized by poor solubility in both aqueous and organic environments. Addressing solubility issues associated with poorly water-soluble drugs has largely resolved the need to enhance drug absorption and bioavailability. As mucosal formulations and topical administration progress in the future, nanosuspension drug delivery, straightforward formulation techniques, and versatile applications will continue to be subjects of interest. Nanosuspensions have undergone extensive scrutiny in preparation for topical applications, encompassing ocular, pulmonary, and dermal usage. Among the numerous methods aimed at improving cutaneous application, nanocrystals represent a relatively recent yet profoundly intriguing approach. Despite the increasing availability of various nanosuspension products, primarily designed for oral administration, only a limited number of studies have explored skin permeability and drug accumulation in the context of nanosuspensions. Nevertheless, the scant published research unequivocally underscores the potential of this approach for enhancing cutaneous bioavailability, particularly for active ingredients with low to medium solubility. Nanocrystals exhibit increased skin adhesiveness in addition to heightened saturation solubility and dissolution rate, thereby augmenting cutaneous distribution. The article provides a comprehensive overview of nanosuspensions for topical application. The methodology employed is robust, with a well-defined experimental design; however, the limited sample size raises concerns about the generalizability of the findings. While the results demonstrate promising outcomes in terms of enhanced drug delivery, the discussion falls short of addressing certain limitations. Additionally, the references largely focus on recent studies, but a more diverse inclusion of historical perspectives could offer a more holistic view of the subject.

Tailoring the use of excipients in bottom-up production of naproxen crystal suspensions via membrane technology.

Long-acting crystal suspensions of active pharmaceutical ingredients (API) mostly comprised of an API, a suspension media (water) and excipients and provide sustained API release over time. Excipients are crucial for controlling particle size and to achieve the stability of the API crystals in suspension. A bottom-up process was designed to produce long-acting crystal suspensions whilst investigating the excipient requirements during the production process and the subsequent storage. PVP K30 emerged as the most effective excipient for generating stable naproxen crystals with the desired size of 1 to 15 µm, using ethanol as solvent and water as anti-solvent. Calculations, performed based on the crystal properties and assuming complete PVP K30 adsorption on the crystal surface, revealed lower PVP K30 requirements during storage compared to initial crystal generation. Consequently, a membrane-based diafiltration process was used to determine and fine-tune PVP K30 concentration in the suspension post-crystallization. A seven-stage diafiltration process removed 98 % of the PVP K30 present in the suspension thereby reducing the PVP-to-naproxen ratio from 1:2 to 1:39 without impacting the stability of naproxen crystals in suspension. This work provides insights into the excipient requirements at various production stages and introduce the membrane-based diafiltration for precise excipient control after crystallization.

Partitioning of dense RBC suspensions in single microfluidic bifurcations: role of cell deformability and bifurcation angle.

Red blood cells (RBCs) are a key determinant of human physiology and their behaviour becomes extremely heterogeneous as they navigate in narrow, bifurcating vessels in the microvasculature, affecting local haemodynamics. This is due to partitioning in bifurcations which is dependent on the biomechanical properties of RBCs, especially deformability. We examine the effect of deformability on the haematocrit distributions of dense RBC suspensions flowing in a single, asymmetric Y-shaped bifurcation, experimentally. Human RBC suspensions (healthy and artificially hardened) at 20% haematocrit (Ht) were perfused through the microchannels at different flow ratios between the outlet branches, and negligible inertia, and imaged to infer cell distributions. Notable differences in the shape of the haematocrit distributions were observed between healthy and hardened RBCs near the bifurcation apex. These lead to more asymmetric distributions for healthy RBCs in the daughter and outlet branches with cells accumulating near the inner channel walls, exhibiting distinct hematocrit peaks which are sharper for healthy RBCs. Although the hematocrit distributions differed locally, similar partitioning characteristics were observed for both suspensions. Comparisons with RBC distributions measured in a T-shaped bifurcation showed that the bifurcation angle affects the haematocrit characteristics of the healthy RBCs and not the hardened ones. The extent of RBC partitioning was found similar in both geometries and suspensions. The study highlights the differences between local and global characteristics which impact RBC distribution in more complex, multi-bifurcation networks.

What to consider for successful administration of oral liquids via enteral feeding tubes? a case study with paediatric ibuprofen suspensions.

Administration of medications via enteral feeding tubes (EFTs) is a common practice for children who cannot swallow properly. Although liquid formulations are the preferred dosage forms for this route of administration, little attention has been paid to the amount of drug that reaches the site of absorption after administration via an EFT. This systematic in vitro study aimed to identify formulation parameters and administration approaches that are critical for successful dose delivery via EFTs. For this purpose, drug recovery after administration of three different paediatric ibuprofen suspensions via different types of EFTs was studied using derivative UV spectrophotometry for quantification. Study results indicate that in addition to formulation parameters, feeding tube characteristics and the administration process can have a significant impact on the administered dose. The ratio between the total administered fluid volume (TAV), represented by the sum of dose- and flushing volume, and the feeding tube volume (FTV) proved to be a valuable indicator for assessing successful administration. Incorrect dosing and complications could be avoided if the TAV/FTV ratio was greater than 4. This and other knowledge gained in the study will help to make the administration of liquid paediatric medicines via EFTs both more effective and safer.

Long-term antitrypanosomal effect of quinapyramine sulphate-loaded oil-based nanosuspension in T. evansi-infected mouse model.

The goal of the present work consisted of the formulation development and evaluation of quinapyramine sulphate (QS)-loaded long-acting oil-based nanosuspension for improved antitrypanosomal effect. QS was transformed into a hydrophobic ionic complex using anionic sodium cholate (Na.C). The complex was characterized by FTIR, DSC, and XRD. Oil-based nanosuspension was prepared by dispersing the QS-Na.C complex in thixotropically thickened olive oil. The nanoformulation was found to be cytocompatible (82.5 ± 5.87% cell viability at the minimum effective concentration [MEC]) in THP-1 cell lines and selectively trypanotoxic (p < 0.0001). The pharmacokinetic studies of QS-Na.C complex-loaded oily nanosuspension showed 13.54-fold, 7.09-fold, 1.78-fold, and 17.35-fold increases in t1/2, AUC0-∞, Vz/F, and MRT0-ꝏ, respectively, as compared to free QS. Moreover, a 7.08-fold reduction in plasma clearance was observed after the treatment with the optimized formulation in Wistar rats. Furthermore, treatment with QS-Na.C complex-loaded oily nanosuspension (7.5 mg/kg) in T. evansi-infected mice model showed the absence of parasitaemia for more than 75 days after the treatment during in vivo efficacy studies. The efficacy of the treatment was assessed by observation of blood smear and PCR assay for DNA amplification. To conclude, our findings suggest that the efficient delivery of QS from the developed QS-Na.C complex-loaded oily nanosuspension could be a promising treatment option for veterinary infections against trypanosomiasis.

Electrolyte-induced aggregation of zein protein nanoparticles in aqueous dispersions.

Ion specific effects on the charging and aggregation features of zein nanoparticles (ZNP) were studied in aqueous suspensions by electrophoretic and time-resolved dynamic light scattering techniques. The influence of mono- and multivalent counterions on the colloidal stability was investigated for positively and negatively charged particles at pH values below and above the isoelectric point, respectively. The sequence of the destabilization power of monovalent salts followed the prediction of the indirect Hofmeister series for positively charged particles, while the direct Hofmeister series for negatively charged ones assumed a hydrophobic character for their surface. The multivalent ions destabilized the oppositely charged ZNPs more effectively and the aggregation process followed the Schulze-Hardy rule. For some multivalent ions, strong adsorption led to charge reversal resulting in restabilization of the suspensions. The experimental critical coagulation concentrations (CCCs) could be well-predicted with the theory developed by Derjaguin, Landau, Verwey and Overbeek indicating that the aggregation processes were mainly driven by electrical double layer repulsion and van der Waals attraction. The ion specific dependence of the CCCs is owing to the modification of the surface charge through ion adsorption at different extents. These results are crucial for drug delivery applications, where inorganic electrolytes are present in ZNP samples.

Impact of defibrillation technique on the rheological, thermo-mechanical, and nutritional properties of nanosuspensions produced from multiple fractions of pinhão seed (Araucaria angustifolia (Bertol.) Kuntze).

This work aimed to evaluate the influence of the mechanical defibrillation technique on the pinhão nanosuspensions production obtained from the whole pinhão, its coat, and almond. The nanosuspensions were characterized concerning their composition, morphology, thermal stability, rheological behavior, compound profiling, and cytotoxicity. The results revealed a significant fiber content in pinhão coat nanosuspension (63.12 ± 0.52 %) and non-fiber carbohydrates in whole pinhão (59.00 ± 0.13 %) and almond (74.39 ± 0.23 %) nanosuspensions. The defibrillation process led to micro/nano-sized fibers in pinhão coat nanosuspensions and small-size starch granules in almond nanosuspensions. The nanosuspensions containing pinhão coat exhibited a gel-like behavior, while almond nanosuspensions displayed liquid-like characteristics. Pinhão coat nanosuspensions presented a significant content of flavonoids and phytosterols, whereas almond-based nanosuspensions contained substantial sugar amounts. No cytotoxicity was observed at the concentrations evaluated. These findings demonstrated that the defibrillation technique impacted the properties of pinhão constituents, allowing their application in new product development.

Is roller milling - the low energy wet bead media milling - a reproducible and robust milling method for formulation investigation of aqueous suspensions?

Long-acting injectables have shown to offer a prolonged release of a drug compound up to several months, providing the opportunity to increase patient compliance for treatment of long-term and chronic conditions. Different formulation technologies have already been utilized for long-acting injectables, and especially aqueous suspensions with crystalline drug particles in the sub-micron range have sparked an interest for future development of long-acting injectables. Wet bead milling is a common top-down process used to prepare nano- and microsuspensions of crystalline drug particles with the addition of surfactants in the dispersion medium, which are working as stabilizers to prevent agglomeration or crystal growth that ultimately may influence the physical stability of nano- and microsuspensions. To examine the reproducibility of the suspensions manufactured and the behavior of their physical stability, i.e., changes in particle sizes over time, low-energy roller mill was utilized for the manufacturing of nano- and microsuspensions in the present study. Investigated formulation parameters was stabilizer type and concentration and milling parameters varied in bead size and duration of milling. The obtained results demonstrated that the physical stability of suspensions containing the two model compounds, cinnarizine and indomethacin, was highly affected by the constitution of surfactant and processing. Various size classes were obtained and accompanied by high variations between the individual samples that indicated uneven and unpredictable milling by the low-energy roller mill, limiting the possibility to prepare reproducible and physical stable suspensions. Short-term stability studies revealed clear tendencies towards reversed Ostwald ripening of suspensions stabilized with poloxamer 188 that contained cinnarizine as the drug compound, and to a smaller extent suspensions containing indomethacin. Furthermore, X-ray Powder Diffraction confirmed no alteration of the drug compounds crystal structure after roller milling for multiple days.

Improved Topical Ophthalmic Natamycin Suspension for the Treatment of Fungal Keratitis.

Purpose: Natamycin (NT) is used as a first-line antifungal prescription in the treatment of fungal keratitis (FK) and is commercially available as a 5% w/v ophthalmic suspension. NT shows poor water solubility and light sensitivity. Thus, the present investigation is aimed to enhance the fraction of NT in solution in the commercial formulation by adding cyclodextrins (CDs), thereby improving the delivery of the drug into deeper ocular tissues. Methods: The solubility of NT in different CDs, the impact of ultraviolet (UV) light exposure, stability at 4°C and 25°C, in vitro release, and ex vivo transcorneal permeation studies were performed. Results: NT exhibited the highest solubility (66-fold) in randomly methylated-ß-cyclodextrin (RM-ßCD) with hydroxypropyl-ßCD (HP-ßCD) showing the next highest solubility (54-fold) increase in comparison to market formulation Natacyn® as control. The stability of NT-CD solutions was monitored for 2 months (last-time point) at both storage conditions. The degradation profile of NT in NT-RM-ßCD and NT-HP-ßCD solutions under UV-light exposure followed first-order kinetics exhibiting half-lives of 1.2 h and 1.4 h, respectively, an almost 3-fold increase over the control solutions. In vitro release/diffusion studies revealed that suspensions containing RM-ßCD and HP-ßCD increased transmembrane flux significantly (3.1-fold) compared to the control group. The transcorneal permeability of NT from NT-RM-ßCD suspension exhibited an 8.5-fold (P < 0.05) improvement compared to Natacyn eyedrops. Furthermore, the addition of RM-ßCD to NT suspension increases the solubilized fraction of NT and enhances transcorneal permeability. Conclusion: Therefore, NT-RM-ßCD formulations could potentially lead to a decreased frequency of administration and significantly improved therapeutic outcomes in FK treatment.