Bio-copper nanoparticle-based superhydrophobic membranes for sustainable oil/water separation.

The effective separation of oil and water presents a significant global challenge due to the growing prevalence of industrial oily wastewater. In this investigation, a superhydrophobic (SP) coating based on bio-copper (Cu) was successfully created using the grape seed extract and applied onto a textile fabric (TF) to create a highly efficient membrane for oil-water (O-W) separation. The characteristics of the resulting bio-Cu nanoparticles, including surface area, morphology, and composition, were examined. The developed SP TF (STF) membrane, based on bio-Cu, underwent extensive analysis of its wettability, morphology, surface composition, oil absorption capacity, O-W separation performance, flux rate, mechanical stability, and chemical stability. The STF membrane exhibited excellent SP properties, with a high-water contact angle of 156° and a low water sliding angle of 2°, indicating its exceptional ability to repel water. Furthermore, the membrane demonstrated a remarkable oil absorption capacity, separation efficiency, and the flux rate toward three different oils (diesel, corn oil, and kerosene). It displayed good mechanical and chemical stability, with the ability to withstand abrasion and immersion in solutions of different pH values for varying exposure times. These findings highlight the potential of the bio-Cu-based STF membrane as an effective and durable solution for O-W separation applications.

A facile method of treating spent catalysts via using solvent for recovering undamaged catalyst support.

The process of washing and removing crude oil from spent catalysts is a serious issue in both catalyst regeneration and precious metals recovery. In this work, five different solvents with various polar and aromatic properties were chosen to evaluate their impact on the catalyst support structure and crude oil recovery from oil-contaminated spent catalysts. After the deoiling process, the spent catalyst was analyzed by scanning electron microscopy, X-ray diffraction (XRD), Fourier transform-infrared spectroscopy, elemental analyzer, contact angle measurement, gas chromatography-mass spectrometry, inductively coupled plasma-atomic emission spectroscopy, and Brunauer Emmet Teller (BET) method. Our findings demonstrate that p-xylene and kerosene are more effective in removing oil than other solvents. This is due to crude oil's similar polarity and molecular nature with kerosene and p-xylene. Considering the economical reason, kerosene is a better choice for deoiling spent catalyst compared to p-xylene as it is more affordable than p-xylene. XRD data show that the structure of the catalyst support was unaltered by the solvent treatment process, while BET data reveals that the surface area and pore volume are significantly enhanced after the deoiling process. These results imply that deoiling is a very crucial step for the recycling, regeneration, and reuse of spent catalysts. Our work is significant in developing sustainable approaches for managing spent catalysts, and minimizing waste and environmental pollution.

Current Trend in the Epidemiology of Thermal Burn Injury at a Tertiary Hospital in South Western Nigeria.

Worldwide, thermal burn is the leading etiological type of burn injury accounting for 86% of burn injuries requiring admissions. Flame, Scald, and contact burn are the leading causes of thermal burn. Changes in the sociodemographic characteristics of societies have led to alterations in the epidemiology of burn. An understanding of such changes in the epidemiology of burn is essential in formulating and executing adequate burn prevention programs. We sought to establish the current trend in the etiology, gender distribution, age, occurrence of inhalation injury, burn surface area, burn depth, and mortality rate of thermal burns at Ibadan. This was a retrospective study carried out between January 2013 and December 2022. Thermal burns constitute 92% of burn injuries. The male-to-female ratio was 1.4:1. There were 265 (45%) patients in the pediatric age group and 323 adults (55% of the patients). The proportion of flame, scald, and contact burns were 378 (58%), 203 (32%), and 14 (2%), respectively. Flame burns resulting from liquified petroleum gas (LPG) explosion show a rising trend, with a decline in flame burns from kerosene (P < .001). One hundred and ninety (32%) patients had inhalation injury. The overall mortality was 19% (N = 114). Kerosene flame, 38% (17 of 45 patients), and LPG, 32% (41 of 130 patients), were the most lethal causes of flame injuries (P < .043). The study shows the increasing contribution of LPG to the etiology of thermal burn injuries. Burn prevention programs should target safe use of LPG stoves and cylinders.

Household heating fuels impact on Acute Respiratory Infection (ARI) symptoms among children in Punjab, Pakistan.

Exposure to household air pollution (HAP) accounted for the loss of 86 million healthy lives in 2019, with almost half of all deaths due to lower respiratory infection among children under 5 years of age. Similarly, the situation in Punjab - Pakistan's largest province - is also not promising. This study was conducted to examine household energy consumption and respiratory symptoms among children under the age of five in rural and urban areas of Punjab. Using data from the Multiple Indicator Cluster Survey (MICS) 2017-18, logistic regression models were applied to the data of a sample of 35,000 children under the age of five living in households with polluting heating fuels. A hypothesis was formulated to investigate the relationship between polluting heating activities and respiratory infections among children under five. Those Children who live in households having traditional space heaters without chimneys are 50% more likely to have symptoms of Acute Respiratory Infection (ARI) compared to those whose households have chimneys with traditional space heaters. When households utilize polluting heating fuel, the likelihood of children experiencing rapid, shortness of breath increases by 49%, and the likelihood of children displaying ARI symptoms characterized by coughing rises by approximately 30%. This study proposed a complete banning of polluting heating activities and replacing it with cleaner ones using financial incentives. It is pertinent to raise awareness campaigns majorly focusing on the guidelines to adopt better heat output with less harmful emissions.

Evaluation of the efficacy of hematoxylin and eosin stain when xylene is completely replaced by turpentine or kerosene oil - A comparative study for oral tissues.

Background: Microscopic examination of cells and tissues requires the preparation of very thin and good-quality sections mounted on glass slides and appropriately stained to demonstrate normal and abnormal structures. Before this step, the tissue must undergo preparatory treatment known as tissue processing. The various stages of tissue processing are dehydration, clearing, impregnation, and embedding, each with a particular duration for proper completion of the process. Xylene is the most frequently used clearing agent whose carcinogenic potential is well documented. Hence, attempts were made to substitute xylene with a biosafe clearing agent. The present study aimed to evaluate and compare the efficacy of hematoxylin and eosin stain (H and E stain) when xylene is completely replaced by turpentine or kerosene oil. Materials and Methods: A total number of 50 tissue samples were taken in the study, which included 40 study samples and 10 controls. All the samples were randomly separated into three groups and routine tissue processing and H and E staining were performed. The result was further subjected to statistical analysis by using Fisher's exact test. Group-1: Ten tissue samples were processed and H and E staining was done in xylene. Group-2: Twenty tissue samples were processed and H and E staining was done in turpentine oil. Group-3: Twenty tissue samples were processed and H and E staining was done in kerosene oil. Results: Nuclear staining, cell morphology, and uniformity of staining were better in kerosene sections, while cytoplasmic and clarity of staining of turpentine sections were comparable with xylene sections. Conclusion: Turpentine and kerosene as clearing agents can be used in the future with certain modifications in their concentration and routine staining protocol.

Kitchen fine particulate matter (PM2.5) concentrations from biomass fuel use in rural households of Northwest Ethiopia.

Background: Combustion of solid biomass fuels using traditional stoves which is the daily routine for 3 billion people emits various air pollutants including fine particulate matter which is one of the widely recognized risk factors for various cardiorespiratory and other health problems. But, there is only limited evidences of kitchen PM2.5 concentrations in rural Ethiopia. Objective: This study is aimed to estimate the 24-h average kitchen area concentrations of PM2.5 and to identify associated factors in rural households of northwest Ethiopia. Method: The average kitchen area PM2.5 concentrations were measured using a low-cost light-scattering Particle and Temperature Sensor Plus (PATS+) for a 24-h sampling period. Data from the PATS+ was downloaded in electronic form for further analysis. Other characteristics were collected using face-to-face interviews. Independent sample t-test and one-way analysis of variance were used to test differences in PM2.5 concentrations between and among various characteristics, respectively. Result: Mixed fuels were the most common cooking biomass fuel. The 24-h average kitchen PM2.5 concentrations was estimated to be 405 µg/m3, ranging from 52 to 965 µg/m3. The average concentrations were 639 vs. 336 µg/m3 (p < 0.001) in the thatched and corrugated iron sheet roof kitchens, respectively. The average concentration was also higher among mixed fuel users at 493 vs. 347 µg/m3 (p = 0.042) compared with firewood users and 493 vs. 233 µg/m3 (p = 0.007) as compared with crop residue fuel users. Statistically significant differences were also observed across starter fuel types 613 vs. 343 µg/m3 (p = 0.016) for kerosene vs. dried leaves and Injera baking events 523 vs. 343 µg/m3 (p < 0.001) for baked vs. not baked events. Conclusion: The average kitchen PM2.5 concentrations in the study area exceeded the world health organization indoor air quality guideline value of 15 µg/m3 which can put pregnant women at greater risk and contribute to poor pregnancy outcomes. Thatched roof kitchen, mixed cooking fuel, kerosene fire starter, and Injera baking events were positively associated with high-level average kitchen PM2.5. concentration. Simple cost-effective interventions like the use of chimney-fitted improved stoves and sensitizing women about factors that aggravate kitchen PM2.5 concentrations could reduce kitchen PM 2.5 levels in the future.

In situ hydro-deoxygenation onto nickel-doped HZSM-5 zeolite catalyst for upgrading pyrolytic oil.

Global energy demand has drastically increased due to urbanization and industrialization; thus, developing alternative renewable energy sources is urgently required. In the present work, upgrading the pyrolytic oil (PO) derived from fresh palm fruit was performed by the catalytic in situ hydrodeoxygenation (in situ HDO) process. Preparation of nickel-doped HZSM-5 zeolite (SiO2/Al2O3 = 40) was achieved by incipient wetness impregnation techniques using different weight percents of nickel dopant into HZSM-5. Nickel-doped HZSM-5 zeolite (Ni-HZSM-5) was further subjected to chemical reduction for 5 h in the oxygen-free environment (10% H2 and 90% N2) at 550 °C. The structural properties showed a potential reduction of NiO-HZSM-5 to Ni-HZSM-5, enhancing the catalytic potential. The morphological characterizations showed spherical-shaped Ni agglomerated onto HZSM-5. Acidity and oxygen contents in the pyrolytic oil were achieved by catalyst-aided HDO process at 220 °C for 6 h using methanol as a hydrogen donor. The catalytically upgraded pyrolytic oil (UPO) was analyzed for density, HHV, CHNO, and TGA. The best upgrading oil was distilled following ASTM D86 to separate gasoline, kerosene, and diesel. The acidity, density, HHV, and viscosity were measured before and after the upgradation processes. The results showed the potential impact of Ni with 10% doped on HZSM-5 on HDO reaction and illustrated the lowest oxygen content in upgraded pyrolytic oil products. Considerable decrease in viscosity and density level indicated that in situ HDO not only reduced oxygen content but also cracked pyrolytic oil to small molecules. The distilled product of upgrading oil was higher than pyrolytic oil by approximately 15% in volume. The viscosity, density, and HHV were under standard specifications of kerosene and diesel, except for acidity. However, the acidity was reduced by over 60% compared with raw material.

Assessment of indoor air quality of porous media combustion-based cookstoves.

The present study analyzes the emission mitigation ability of a porous media combustion (PMC) technology-based cookstove compared to a free flame combustion (FFC) technology-based cookstove. Emission of pollutants, i.e., PM2.5, PM10, and CO, caused due to burning of fuels, namely, methanol, ethanol, kerosene, and LPG in the kitchen environment are measured. The study incorporated exhaustive real-time indoor air quality (IAQ) measurements and presented the temporal variation of measured pollutant concentrations for 2 h (morning meal duration). In addition, 24 h average concentration of the measured pollutants is also compared with the limits prescribed in WHO guidelines for domestic settings. The results emphasized that the utilization of cookstove based on PMC would help in improving the IAQ of the kitchen area by decreasing the concentrations of PM2.5, PM10, and CO. For 2 h duration measurements, the methanol cookstove based on PMC reduced the concentrations of PM2.5, PM10, and CO by 7.7%, 8.1%, and 17.2%, respectively, compared to FFC cookstove. Similarly, in the case of PMC-based LPG cookstove and kerosene cookstove, the respective values were 11.7%, 20.4%, and 41.6% and 55.3%, 62.6%, and 66.6%. Among all the tested cookstoves, PMC-based LPG cookstove achieved the lowest emission values (PM2.5: 20.6 µg/m3, PM10: 31.3 µg/m3, and CO: 1 ppm) which are lower than the prescribed WHO values (PM2.5: 25 µg/m3, PM10: 50 µg/m3, and CO: 6 ppm).

Morphological and Compositional Analysis on Thermal Deposition of Supercritical Aviation Kerosene in Micro Channels.

The integration of active cooling systems in super or hypersonic aircraft using endothermic hydrocarbon fuels is considered an effective way to relieve the thermal management issues caused by overheating. When the temperature of aviation kerosene exceeds 150 °C, the oxidation reaction of fuel is accelerated, forming insoluble deposits that could cause safety hazards. This work investigates the deposition characteristic as well as the morphology of the deposits formed by thermal-stressed Chinese RP-3 aviation kerosene. A microchannel heat transfer simulation device is used to simulate the heat transfer process of aviation kerosene under various conditions. The temperature distribution of the reaction tube was monitored by an infrared thermal camera. The properties and morphology of the deposition were analyzed by scanning electron microscopy and Raman spectroscopy. The mass of the deposits was measured using the temperature-programmed oxidation method. It is observed that the deposition of RP-3 is highly related to dissolved oxygen content (DOC) and temperature. When the outlet temperature increased to 527 °C, the fuel underwent violent cracking reactions, and the structure and morphology of deposition were significantly different from those caused by oxidation. Specifically, this study reveals that the structure of the deposits caused by short-to-medium term oxidation are dense, which is different from long-term oxidative deposits.

Assessment of the proportion of households with burn victims, associated risk factors and knowledge of burn injury prevention strategies in South Western Uganda. A population based cross sectional survey.

BACKGROUND: Burn injuries are a major cause of morbidity and mortality within Low- and Middle-income countries (LMICs). Most of these burn injuries occur at home with children most at risk. The majority of burn related deaths and disability in LMICs have been described as preventable. Burns prevention requires adequate knowledge of the epidemiological characteristics and associated risk factors. The aim of this study was to assess the proportion of households with burn victims, the associated risk factors and knowledge of prevention strategies of burn injuries in Kakoba division, Mbarara city. METHODS: We did a population based cross sectional survey of households in Kakoba division. This is the most populous division in Mbarara city. Face-to-face interviews were conducted using a pretested structured questionnaire. Descriptive analysis was performed to establish prevalence and knowledge of preventive strategies for household burns. Univariate and multivariate logistic regression models were fitted to establish the factors influencing burn injuries at household level. RESULTS: Of the households in Kakoba Division, 41.2% had individuals who had previously sustained burn injuries within the household. Children were the most affected population with scald burns the most common type. The highest risk of burn injuries was associated with overcrowding in the households. Electricity as a light source was found to be protective. Candles and Kerosene lamps were the commonest alternative light sources. Majority 98% of the individuals in the households knew at least one burns prevention strategy with 93% practicing at least one. CONCLUSION: Burns within the household are still high despite knowledge of risk factors with children being the most affected. Overcrowding still plays a significant role in household burn injuries. We therefore recommend closer supervision of children within the households. Cooking areas need to be properly designated and secured to limit access. Safer alternative light sources need to be explored such as solar lamps. Political leaders need to be involved in setting up and monitoring community-based fire safety practices to ensure compliance.

Toxicity and human health assessment of an alcohol-to-jet (ATJ) synthetic kerosene developed under an international agreement with Sweden.

Alcohol-to-jet (ATJ) Synthetic Kerosene with Aromatics (SKA) fuels are produced by dehydration and refining of alcohol feed stocks. ATJ SKA fuel known as SB-8 was developed by Swedish Biofuels as a cooperative agreement between Sweden and AFRL/RQTF. SB-8 including standard additives was tested in a 90-day toxicity study with male and female Fischer 344 rats exposed to 0, 200, 700, or 2000 mg/m3 fuel in an aerosol/vapor mixture for 6 hr/day, 5 days/week. Aerosols represented 0.04 and 0.84% average fuel concentration in 700 or 2000 mg/m3 exposure groups. Examination of vaginal cytology and sperm parameters found no marked changes in reproductive health. Neurobehavioral effects were increased rearing activity (motor activity) and significantly decreased grooming (functional observational battery) in 2000 mg/m3 female rats. Hematological changes were limited to elevated platelet counts in 2000 mg/m3 exposed males. Minimal focal alveolar epithelial hyperplasia with increased number of alveolar macrophages was noted in some 2000 mg/m3 males and one female rat. Additional rats tested for genotoxicity by micronucleus (MN) formation did not detect bone marrow cell toxicity or alterations in number of MN; SB-8 was not clastogenic. Inhalation results were similar to effects reported for JP-8. Both JP-8 and SB fuels were moderately irritating under occlusive wrapped conditions but slightly irritating under semi-occlusion. Exposure to SB-8, alone or as 50:50 blend with petroleum-derived JP-8, is not likely to enhance adverse human health risks in the military workplace.

Discriminating Aroma Compounds in Five Cocoa Bean Genotypes from Two Brazilian States: White Kerosene-like Catongo, Red Whisky-like FL89 (Bahia), Forasteros IMC67, PA121 and P7 (Pará).

Fine-grade cocoa beans are characterized by their great organoleptic quality. Brazilian cocoa producers increasingly privilege organoleptic quality over yield. Catongo and FL89, fine Brazilian cocoa genotypes from Bahia, are characterized by particular flavors (respectively, kerosene and whisky). The beans IMC67, PA121, and P7 from the state of Pará are genotypes that have high resistance to diseases. Solvent-assisted flavor evaporation (SAFE) aroma extraction was used here to identify and quantify the volatile compounds discriminating these genotypes. The results show that the kerosene aroma of Catongo is likely due to the presence, at high levels, of ethyl acetate and isobutyl acetate. On the other hand, ethyl benzoate, heptanoate, and octanoate, trans-2-nonenal, 1-octen-3-ol, and 3-methylbutanol could play a key role in the whisky notes of FL89. Heptan-2-ol, heptan-2-one, nonan-2-one, linalool (although still more concentrated in IMC67 from Pará state), benzaldehyde, and phenylacetaldehyde also discriminate these beans. Other compounds, although not discriminating, appear important in determining their aromatic quality. The PCA showed that cocoa from Pará state formed a cluster due to similar aromas, while FL89 was the most distinct among the genotypes. Beans from Brazil show great potential and diversity for the fine cocoa market.

Risk assessment and environmental determinants of urinary phthalate metabolites in pregnant women in Southwest China.

Pregnant women are widely exposed to phthalic acid esters (PAEs) that are commonly used in most aspects of modern life. However, few studies have examined the cumulative exposure of pregnant women to a variety of PAEs derived from the living environmental conditions in China. Therefore, this study aimed to determine the urinary concentrations of nine PAE metabolites in pregnant women, examine the relationship between urinary concentrations and residential characteristics, and conduct a risk assessment analysis. We included 1,888 women who were in their third trimester of pregnancy, and we determined their urinary concentrations of nine PAE metabolites using high-performance gas chromatography-mass spectrometry. The risk assessment of exposure to PAEs was calculated based on the estimated daily intake. A linear regression model was used to analyze the relationship between creatinine-adjusted PAE metabolite concentrations and residential characteristics. The detection rate of five PAE metabolites in the study population was > 90%. Among the PAE metabolites adjusted by creatinine, the urinary metabolite concentration of monobutyl phthalate was found to be the highest. Residential factors, such as housing type, proximity to streets, recent decorations, lack of ventilation in the kitchen, less than equal to three rooms, and the use of coal/kerosene/wood/wheat straw fuels, were all significantly associated with high PAE metabolite concentrations. Due to PAE exposure, ~ 42% (n = 793) of the participants faced potential health risks, particularly attributed to dibutyl phthalate, diisobutyl phthalate, and di(2-ethyl)hexyl phthalate exposure. Living in buildings and using coal/kerosene/wood/wheat straw as domestic fuel can further increase the risks.

Epidemiology and Outcomes of Cooking- and Cookstove-Related Burn Injuries: A World Health Organization Global Burn Registry Report.

Cooking- and cookstove-related burns (CSBs) comprise a large proportion of burn injuries globally, but there are limited data on cooking behavior patterns to inform prevention and advocacy. Therefore, we aimed to describe the epidemiology, risk factors, and outcomes of these injuries and highlight the potential of the World Health Organization (WHO) Global Burn Registry (GBR). Patients with cooking-related burns were identified in the WHO GBR. Patient demographics, cooking arrangement, injury characteristics, and outcomes were described and compared. Bivariate regression was performed to identify risk factors associated with CSBs. Analysis demonstrated that 25% of patients in the GBR sustained cooking-related burns (n = 1723). The cooking environment and cooking fuels used varied significantly by country income level ([electricity use: LIC 1.6 vs MIC 5.9 vs HIC 49.6%; P < .001] [kerosene use: LIC 5.7 vs MIC 10.4 vs HIC 0.0%; P < .001]). Of cooking-related burns, 22% were cookstove-related burns (CSBs; 311 burns). Patients with CSBs were more often female (65% vs 53%; P < .001). CSBs were significantly larger in TBSA size (30%, IQR 15-45 vs 15%, IQR 10-25; P < .001), had higher revised Baux scores (70, IQR 46-95 vs 28, IQR 10-25; P < .001) and more often resulted in death (41 vs 11%; P < .001) than other cooking burns. Patients with CSBs were more likely to be burned by fires (OR 4.74; 95% CI 2.99-7.54) and explosions (OR 2.91, 95% CI 2.03-4.18) than other cooking injuries. Kerosene had the highest odds of CSB compared to other cooking fuels (OR 2.37, 95% CI 1.52-3.69). In conclusion, CSBs specifically have different epidemiology than cooking-related burns. CSBs were more likely caused by structural factors (eg, explosion, fire) than behavioral factors (eg, accidental movements) when compared to other cooking burns. These differences suggest prevention interventions for CSBs may require distinctive efforts than typically deployed for cooking-related injuries, and necessarily involve cookstove design and safety regulations to prevent fires and explosions.

Monitoring of polycyclic aromatic hydrocarbons emitted from kerosene fuel burning and assessment of health risks among women in selected rural and urban households of South India.

Polycyclic aromatic hydrocarbons (PAHs) are well-known hazardous substances; nevertheless, research on their exposure and health concerns associated with kerosene fuel emissions is limited. In this study, PAH (combined gaseous and particle phase) monitoring was carried out in the kitchen and living room in selected households. Personal exposure and cooking time monitoring were also carried out, simultaneously. The study's findings revealed that BaP, BA, BbF, and Nap were the most prevalent PAHs in both the summer and winter seasons, regardless of urban or rural households. The estimated values of average incremental lifetime cancer risks were found to be greater than the USEPA level, i.e., 1 × 10-6, in both urban and rural households, regardless of seasonal fluctuation. In both seasons, the non-carcinogenic risk for developmental and reproductive effects was higher in rural women than in urban women, and in case of developmental risk it showed greater than unity (rural: 1.11 and urban 1.03) in the winter season. On the other hand, Monte Carlo simulation model revealed that concentrations of PAHs (97.1% and 97.5%) and exposure duration (51.7% and 56.7%) were the most sensitive factors contributed for health risk estimations for urban and rural area in both seasons, respectively. Furthermore, the results clearly showed that women who were using kerosene for cooking were at a greater risk of acquiring both carcinogenic and non-carcinogenic health consequences from PAH exposure from kerosene cookstoves. It was recommended that they should utilize clean fuel, either by using LPG under the PMUY scheme or by using electricity/solar power to reduce health risks for better health.

Mycolicibacterium aurantiacum sp. nov. and Mycolicibacterium xanthum sp. nov., two novel actinobacteria isolated from mangrove sediments.

Two novel actinobacteria with the ability to degrade kerosene, designated as B3033T and Y57T, were isolated from mangrove sediments in Tieshan Harbour, South China Sea. Both strains are Gram-staining-positive, non-spore forming, slow-growing, oxidase-positive, non-motile and aerobic. Their major cellular fatty acids were C16 : 0 and C18 : 1ω9c. Analysis of 16S rRNA gene sequences revealed the close relationship of strain B3033T to Mycobacterium kyogaense DSM 107316T (99.4 % nucleotide identity) and strain Y57T to Mycolicibacterium chubuense ATCC 27278T (98.7 %) and Mycolicibacterium rufum JS14T (98.7 %). Whole genome average nucleotide blast identity (ANI) and the digital DNA-DNA hybridization (dDDH) values between the two isolates and the type strains of species of the genus Mycolicibacterium were lower than 94 and 45 %, respectively, which were below the threshold values of 95 % (for ANI) and 70 % (for dDDH) recommended for bacterial species differentiation. The genome sequence of B3033T comprised a circular 11.0 Mb chromosome with a DNA G+C content of 68.1 mol%. Y57T had a genome size of 5.6 Mb and a DNA G+C content of 68.7 mol%. Genes involved in degradation of aromatic compounds and copper resistance were identified in the genomes of both strains that could improve their adaptive capacity to the mangrove environment. These results combined with those of chemotaxonomic analyses, MALDI-TOF MS profiles and phenotypic analyses support the affiliation of these strains to two novel species within the genus Mycolicibacterium, for which we propose the names Mycolicibacterium aurantiacum sp. nov. B3033T (=KCTC 49712T=MCCC 1K04526T) and Mycolicibacterium xanthum sp. nov. Y57T (=KCTC 49711T=MCCC 1K04875T) as type strains.

Biodegradation of Petroleum Hydrocarbons by Drechsleraspicifera Isolated from Contaminated Soil in Riyadh, Saudi Arabia.

Currently, the bioremediation of petroleum hydrocarbons employs microbial biosurfactants because of their public acceptability, biological safety, and low cost. These organisms can degrade or detoxify organic-contaminated areas, such as marine ecosystems. The current study aimed to test the oil-biodegradation ability of the fungus Drechslera spicifera, which was isolated from contaminated soil samples in Riyadh, Saudi Arabia. We used hydrocarbon tolerance, scanning electron microscopy, DCPIP, drop-collapse, emulsification activity, recovery of biosurfactants, and germination assays to assess the biodegradation characteristics of the D. spicifera against kerosene, crude, diesel, used, and mixed oils. The results of DCPIP show that the highest oxidation (0.736 a.u.) was induced by crude oil on the 15th day. In contrast, kerosene and used oil had the highest measurements in emulsification activity and drop-collapse assays, respectively. Meanwhile, crude and used oils produced the highest amounts of biosurfactants through acid precipitation and solvent extraction assays. Furthermore, the biosurfactants stimulated the germination of tomato seeds by more than 50% compared to the control. These findings highlight the biodegradation ability of D. spicifera, which has been proven in the use of petroleum oils as the sole source of carbon. That might encourage further research to demonstrate its application in the cleaning of large, contaminated areas.

Safety assessment of charcoal usage and effects of common charcoal ignition aiders on combustion indices.

Charcoal is a popular form of biofuel embraced for domestic and industrial purposes. However, the use of Charcoal has some associated challenges, such as the required charcoal pot and setting it into the fire at first by using Charcoal-Ignition-Aiders (CIA) (e.g. discarded paper, nylon, rubber, plastics, petrol, the residue of processed palm oil, maise cob, wood, and kerosene). Coupled with the chemical properties of Charcoal, the resulting gases from CIA are capable of polluting the environment with perceived Adverse-Health-Implications (AHI) on the ecosystem. Therefore, this study conducted a safety assessment of charcoal biofuel usage and the effects of common CIA on combustion indices. This study followed standard methods and the use of peculiar equipment. This study established that Charcoal is commonly used in the studied area because it is cheap, readily available and requires less technical know-how. Considering the combustion indices, using paper as a CIA generated the lowest carbon monoxide (CO) value, 28.1 ppm, with 3,434.54 ppm volatile organic compound, VOC. Compared with the ACGIH standard permissible exposure level of ≤ 30 ppm, the paper gave a lesser CO value of 28.10 ppm among all the CIA. At the same time, all the CIA recorded higher VOC compared with EPA standard permissible exposure level of ≤ 15 ppm. ANOVA analysis conducted on the socio-demographic profile of the respondents, cooking attributes of the respondents, and use of charcoal pot types by the respondents in Zone 1, Zone 2, and Zone 3 gave p-values of 0.032, 0.028, and 0.039, respectively. These imply significant differences within the zones in each of the indices. The average energy content reported for charcoals sourced from oak trees, afara, obeche, mahogany, and iroko woods is 3,2149 kJ/kg compared to the lower ones. Therefore, this study recommended using these charcoals alongside discarded paper as CIA because they are a better combination to reduce AHI.