Injectable Nanoengineered Adhesive Hydrogel for Treating Enterocutaneous Fistulas.

Enterocutaneous fistula (ECF) is a severe medical condition where an abnormal connection forms between the gastrointestinal tract and skin. ECFs are, in most cases, a result of surgical complications such as missed enterotomies or anastomotic leaks. The constant leakage of enteric and fecal contents from the fistula site leads to skin breakdown and increases the risk of infection. Despite advances in surgical techniques and postoperative management, ECF accounts for significant mortality rates, estimated between 15-20%, and causes debilitating morbidity. Therefore, there is a critical need for a simple and effective method to seal and heal ECF. Injectable hydrogels with combined properties of robust mechanical properties and cell infiltration/proliferation have the potential to block and heal ECF. Herein, we report the development of an injectable nanoengineered adhesive hydrogel (INAH) composed of a synthetic nanosilicate (Laponite®) and a gelatin-dopamine conjugate for treating ECF. The hydrogel undergoes fast cross-linking using a co-injection method, resulting in a matrix with improved mechanical and adhesive properties. INAH demonstrates appreciable blood clotting abilities and is cytocompatible with fibroblasts. The adhesive properties of the hydrogel are demonstrated in ex vivo adhesion models with skin and arteries, where the volume stability in the hydrated internal environment facilitates maintaining strong adhesion. In vivo assessments reveal that the INAH is biocompatible, supporting cell infiltration and extracellular matrix deposition while not forming fibrotic tissue. These findings suggest that this INAH holds promising translational potential for sealing and healing ECF.

Photocurable extracellular matrix sealant for cessation of venous hemorrhage.

Hemorrhage is the second leading cause of death in patients under 46 years of age in the United States. Cessation of hemorrhage prevents hemorrhagic shock and tissue hypoxia. Controlling the bleed via direct pressure or tourniquet is often the first line of defense, but long-term care requires staples, hemostatic agents, or sealants that seal the vessel and restore blood flow. Here, we compare a new photocurable extracellular matrix sealant (pcECM) with low, medium, and high crosslink density formulations to a commercially available fibrin-based sealant, TISSEEL®. pcECM has potential uses in surgical and remote settings due to room temperature storage conditions and fast preparation time. Here, we determine if pcECM sealant can stop venous hemorrhage in a murine model, adhere to the wound site in vivo throughout the wound-healing process, and has the mechanical properties necessary for stopping hemorrhage. Adjusting pcECM crosslinking density significantly affected viscosity, swelling, burst strength, tensile strength, and elasticity of the sealant. 3-Dimensional ultrasound volume segmentations showed pcECM degrades to 17 ± 8% of its initial implant volume by day 28. Initially, local hemodynamic changes were observed, but returned close to baseline levels by day 28. Acute inflammation was observed near the puncture site in pcECM implanted mice, and we observed inflammatory markers at the 14-day explant for both sealants. pcECM and fibrin sealant successfully sealed the vessel in all cases, and consistently degraded over 14-28 days. pcECM is a durable sealant with tunable mechanical properties and possible uses in hemorrhage control and other surgical procedures.

Janus Polyurethane Adhesive Patch with Antibacterial Properties for Wound Healing.

Despite the rapid development of tissue adhesives, flaws including allergies, poor stability, and indiscriminate double-sided adhesive properties limit their application in the medical field. In this work, Janus polyurethane patches were spontaneously prepared by adjusting the difference in the functional group distribution between the top and bottom sides of the patch during emulsion drying. Consequently, poor adhesion was exhibited on the bottom surface, while the top surface can easily adhere to metals, polymers, glasses, and tissues. The difference in adhesive strength to pork skin between the two surfaces is more than 5 times. The quaternary ammonium salt and hydrophilic components on the surface of the polyurethane patch enable the rapid removal and absorption of water from the tissue surface to achieve wet adhesion. Animal experiments have demonstrated that this multifunctional Janus polyurethane patch can promote skin wound closure and healing of infected wounds. This facile and effective strategy to construct Janus polyurethane patch provides a promising method for the development of functional tissue-adhesives.

Improved hydration property of tissue adhesive/hemostatic microparticle based on hydrophobically-modified Alaska pollock gelatin.

The management of bleeding is an important aspect of endoscopic surgery to avoid excessive blood loss and minimize pain. In clinical settings, sprayable hemostatic particles are used for their easy delivery, adaptability to irregular shapes, and rapid hydration. However, conventional hemostatic particles present challenges associated with tissue adhesion. In a previous study, we reported tissue adhesive microparticles (C10-sa-MPs) derived from Alaska pollock gelatin modified with decyl groups (C10-sa-ApGltn) using secondary amines as linkages. The C10-sa-MPs adhere to soft tissues through a hydration mechanism. However, their application as a hemostatic agent was limited by their long hydration times, attributed to their high hydrophobicity. In this study, we present a new type microparticle, C10-am-MPs, synthesized by incorporating decanoyl group modifications into ApGltn (C10-am-ApGltn), using amide bonds as linkages. C10-am-MPs exhibited enhanced hydration characteristics compared to C10-sa-MPs, attributed to superior water absorption facilitated by amide bonds rather than secondary amines. Furthermore, C10-am-MPs demonstrated comparable tissue adhesion properties and underwater adhesion stability to C10-sa-MPs. Notably, C10-am-MPs exhibited accelerated blood coagulation in vitro compared to C10-sa-MPs. The application of C10-am-MPs in an in vivo rat liver hemorrhage model resulted in a hemostatic effect comparable to a commercially available hemostatic particle. These findings highlight the potential utility of C10-am-MPs as an effective hemostatic agent for endoscopic procedures and surgical interventions.

Biochemical and biomechanical characterization of an autologous protein-based fibrin sealant for regenerative medicine.

Accidental events or surgical procedures usually lead to tissue injury. Fibrin sealants have proven to optimize the healing process but have some drawbacks due to their allogeneic nature. Autologous fibrin sealants present several advantages. The aim of this study is to evaluate the performance of a new autologous fibrin sealant based on Endoret®PRGF® technology (E-sealant). One of the most widely used commercial fibrin sealants (Tisseel®) was included as comparative Control. E-sealant´s hematological and biological properties were characterized. The coagulation kinetics and the microstructure were compared. Their rheological profile and biomechanical behavior were also recorded. Finally, the swelling/shrinkage capacity and the enzymatic degradation of adhesives were determined. E-sealant presented a moderate platelet concentration and physiological levels of fibrinogen and thrombin. It clotted 30 s after activation. The microstructure of E-sealant showed a homogeneous fibrillar scaffold with numerous and scattered platelet aggregates. In contrast, Control presented absence of blood cells and amorphous protein deposits. Although in different order of magnitude, both adhesives had similar rheological profiles and viscoelasticity. Control showed a higher hardness but both adhesives presented a pseudoplastic hydrogel nature with a shear thinning behavior. Regarding their adhesiveness, E-sealant presented a higher tensile strength before cohesive failure but their elastic stretching capacity and maximum elongation was similar. While E-sealant presented a significant shrinkage process, Control showed a slight swelling over time. In addition, E-sealant presented a high enzymatic resorption rate, while Control showed to withstand the biodegradation process in a significant way. E-sealant presents optimal biochemical and biomechanical properties suitable for its use as a fibrin sealant with regenerative purposes.

A tough bioadhesive hydrogel supports sutureless sealing of the dural membrane in porcine and ex vivo human tissue.

Complete sequestration of central nervous system tissue and cerebrospinal fluid by the dural membrane is fundamental to maintaining homeostasis and proper organ function, making reconstruction of this layer an essential step during neurosurgery. Primary closure of the dura by suture repair is the current standard, despite facing technical, microenvironmental, and anatomic challenges. Here, we apply a mechanically tough hydrogel paired with a bioadhesive for intraoperative sealing of the dural membrane in rodent, porcine, and human central nervous system tissue. Tensile testing demonstrated that this dural tough adhesive (DTA) exhibited greater toughness with higher maximum stress and stretch compared with commercial sealants in aqueous environments. To evaluate the performance of DTA in the range of intracranial pressure typical of healthy and disease states, ex vivo burst pressure testing was conducted until failure after DTA or commercial sealant application on ex vivo porcine dura with a punch biopsy injury. In contrast to commercial sealants, DTA remained adhered to the porcine dura through increasing pressure up to 300 millimeters of mercury and achieved a greater maximum burst pressure. Feasibility of DTA to repair cerebrospinal fluid leak in a simulated surgical context was evaluated in postmortem human dural tissue. DTA supported effective sutureless repair of the porcine thecal sac in vivo. Biocompatibility and adhesion of DTA was maintained for up to 4 weeks in rodents after implantation. The findings suggest the potential of DTA to augment or perhaps even supplant suture repair and warrant further exploration.

Cyanoacrylate tissue adhesive versus silk sutures for mandibular third molar surgery: a systematic review and meta-analysis.

OBJECTIVE: Cyanoacrylate tissue adhesive has been presented as an alternative to sutures and several studies have compared them. The objective of this meta-analysis was to evaluate the effect of cyanoacrylate tissue adhesive on postoperative pain and swelling, following mandibular third molar surgery. MATERIALS AND METHODS: Database search was conducted in MEDLINE/PubMed and Scopus, along with extensive search in the grey literature, including randomized and non-randomized clinical trials that applied cyanoacrylate adhesive for closing mandibular third molar surgical sites and compared it with silk sutures, assessing postoperative pain and swelling. The search ended on September 22, 2023. RESULTS: Of 886 identified articles, six were included and meta-analyzed. Applying cyanoacrylate demonstrated a reduction in the overall postoperative pain (SMD = -0.57, 95% CI -1.00 to -0.15, p = 0.009). A similar outcome was noted when pain was evaluated on the first and last postoperative days, based on controlled clinical trials (SMD = -0.47, 95% CI -0.92 to -0.03, p = 0.04), and randomized trials (SMD = -0.97, 95% CI -1.31 to -0.62, p < 0.00001). Patients/sides received cyanoacrylate showed a decrease in postoperative swelling (SMD = -0.26, 95% CI -0.51 to -0.01, p = 0.04). Following the GRADE rating system, the quality of evidence on pain and swelling was judged as moderate and low, respectively. CONCLUSIONS: The use of cyanoacrylate adhesive may offer benefit in reducing postoperative pain and swelling following mandibular third molar surgery. Nevertheless, this should be further investigated, considering the low number of included reports. CLINICAL RELEVANCE: The current results could help clinicians who perform this procedure to manage postoperative pain and swelling more effectively.

Evaluation of the efficacy and safety of endoscopic band ligation in the treatment of bleeding from mild to moderate gastric varices type 1.

BACKGROUND: According to practice guidelines, endoscopic band ligation (EBL) and endoscopic tissue adhesive injection (TAI) are recommended for treating bleeding from esophagogastric varices. However, EBL and TAI are known to cause serious complications, such as hemorrhage from dislodged ligature rings caused by EBL and hemorrhage from operation-related ulcers resulting from TAI. However, the optimal therapy for mild to moderate type 1 gastric variceal hemorrhage (GOV1) has not been determined. Therefore, the aim of this study was to discover an individualized treatment for mild to moderate GOV1. AIM: To compare the efficacy, safety and costs of EBL and TAI for the treatment of mild and moderate GOV1. METHODS: A clinical analysis of the data retrieved from patients with mild or moderate GOV1 gastric varices who were treated under endoscopy was also conducted. Patients were allocated to an EBL group or an endoscopic TAI group. The differences in the incidence of varicose relief, operative time, operation success rate, mortality rate within 6 wk, rebleeding rate, 6-wk operation-related ulcer healing rate, complication rate and average operation cost were compared between the two groups of patients. RESULTS: The total effective rate of the two treatments was similar, but the efficacy of EBL (66.7%) was markedly better than that of TAI (39.2%) (P < 0.05). The operation success rate in both groups was 100%, and the 6-wk mortality rate in both groups was 0%. The average operative time (26 min) in the EBL group was significantly shorter than that in the TAI group (46 min) (P < 0.01). The rate of delayed postoperative rebleeding in the EBL group was significantly lower than that in the TAI group (11.8% vs 45.1%) (P < 0.01). At 6 wk after the operation, the healing rate of operation-related ulcers in the EBL group was 80.4%, which was significantly greater than that in the TAI group (35.3%) (P < 0.01). The incidence of postoperative complications in the two groups was similar. The average cost and other related economic factors were greater for the EBL than for the TAI (P < 0.01). CONCLUSION: For mild to moderate GOV1, patients with EBL had a greater one-time varix eradication rate, a greater 6-wk operation-related ulcer healing rate, a lower delayed rebleeding rate and a lower cost than patients with TAI.

Black phosphorus boosts wet-tissue adhesion of composite patches by enhancing water absorption and mechanical properties.

Wet-tissue adhesives have long been attractive materials for realizing complicated biomedical functions. However, the hydration film on wet tissues can generate a boundary, forming hydrogen bonds with the adhesives that weaken adhesive strength. Introducing black phosphorus (BP) is believed to enhance the water absorption capacity of tape-type adhesives and effectively eliminate hydration layers between the tissue and adhesive. This study reports a composite patch integrated with BP nanosheets (CPB) for wet-tissue adhesion. The patch's improved water absorption and mechanical properties ensure its immediate and robust adhesion to wet tissues. Various bioapplications of CPB are demonstrated, such as rapid hemostasis (within ~1-2 seconds), monitoring of physical-activity and prevention of tumour-recurrence, all validated via in vivo studies. Given the good practicability, histocompatibility and biodegradability of CPB, the proposed patches hold significant promise for a wide range of biomedical applications.

A 3D printable tissue adhesive.

Tissue adhesives are promising alternatives to sutures and staples for joining tissues, sealing defects, and immobilizing devices. However, existing adhesives mostly take the forms of glues or hydrogels, which offer limited versatility. We report a direct-ink-write 3D printable tissue adhesive which can be used to fabricate bioadhesive patches and devices with programmable architectures, unlocking new potential for application-specific designs. The adhesive is conformable and stretchable, achieves robust adhesion with wet tissues within seconds, and exhibits favorable biocompatibility. In vivo rat trachea and colon defect models demonstrate the fluid-tight tissue sealing capability of the printed patches, which maintained adhesion over 4 weeks. Moreover, incorporation of a blood-repelling hydrophobic matrix enables the printed patches to seal actively bleeding tissues. Beyond wound closure, the 3D printable adhesive has broad applicability across various tissue-interfacing devices, highlighted through representative proof-of-concept designs. Together, this platform offers a promising strategy toward developing advanced tissue adhesive technologies.

[Research Progress and Design Strategy of Hemostatic Adhesives].

Adhesives have emerged as an effective method for wound closure, hemostasis and tissue engineering in recent years, which not only are suitable for the adhesion of wet tissues, but also can adapt to the peristalsis and mechanical stretching of tissues and organs, especially for arteries and organize bleeding. With the further development of technology, existing adhesives can be modified through different strategies, and new materials are explored, giving new properties and uses to adhesives, such as drug delivery, temperature sensitivity, light sensitivity and so on. Nevertheless, there are many questions about the design and practical clinical application of adhesives in the future. The recent research progress of traditional adhesives and their application in hemostasis is reviewed, and the design and development ideas of future adhesives are discussed in the study.

Injectable, Antioxidative, and Tissue-Adhesive Nanocomposite Hydrogel as a Potential Treatment for Inner Retina Injuries.

Reactive oxygen species (ROS) have been recognized as prevalent contributors to the development of inner retinal injuries including optic neuropathies such as glaucoma, non-arteritic anterior ischemic optic neuropathy, traumatic optic neuropathy, and Leber hereditary optic neuropathy, among others. This underscores the pivotal significance of oxidative stress in the damage inflicted upon retinal tissue. To combat ROS-related challenges, this study focuses on creating an injectable and tissue-adhesive hydrogel with tailored antioxidant properties for retinal applications. GelCA, a gelatin-modified hydrogel with photo-crosslinkable and injectable properties, is developed. To enhance its antioxidant capabilities, curcumin-loaded polydopamine nanoparticles (Cur@PDA NPs) are incorporated into the GelCA matrix, resulting in a multifunctional nanocomposite hydrogel referred to as Cur@PDA@GelCA. This hydrogel exhibits excellent biocompatibility in both in vitro and in vivo assessments, along with enhanced tissue adhesion facilitated by NPs in an in vivo model. Importantly, Cur@PDA@GelCA demonstrates the potential to mitigate oxidative stress when administered via intravitreal injection in retinal injury models such as the optic nerve crush model. These findings underscore its promise in advancing retinal tissue engineering and providing an innovative strategy for acute neuroprotection in the context of inner retinal injuries.

Injectable, shear-thinning, photocrosslinkable, and tissue-adhesive hydrogels composed of diazirine-modified hyaluronan and dendritic polyethyleneimine.

In the present study, we report the first synthesis of diazirine-modified hyaluronic acid (HA-DAZ). In addition, we also produced a precursor polymer solution composed of HA-DAZ and dendritic polyethyleneimine (DPI) that showed strong shear-thinning properties. Furthermore, its viscosity was strongly reduced (i.e., from 5 × 105 mPa s at 10-3 s-1 to 6 × 101 mPa s at 103 s-1), substantially, which enhanced solution injectability using a 21 G needle. After ultraviolet irradiation at 365 nm and 6 mW cm-2, the HA-DAZ/DPI solution achieved rapid gelation, as measured using the stirring method, and its gelation time decreased from 200 s to 9 s as the total concentrations of HA-DAZ and DPI increased. Following UV irradiation, the storage modulus increased from 40 to 200 Pa. In addition, reversible sol-gel transition and self-healing properties were observed even after UV irradiation. This suggests that the HA-DAZ/DPI hydrogel was crosslinked in multiple ways, i.e., via covalent bonding between the diazirine and amine groups and via intermolecular interactions, including hydrogen bonding, electrostatic interactions, and hydrophobic interactions. A lap shear test showed that the HA-DAZ/DPI hydrogel exhibited strong adhesiveness as a fibrin glue following UV irradiation. Finally, the HA-DAZ/DPI hydrogel showed higher tissue reinforcement than fibrin glue in an ex vivo burst pressure test of the porcine esophageal mucosa.

Progress of polysaccharide-based tissue adhesives.

Recently, polymer-based tissue adhesives (TAs) have gained the attention of scientists and industries as alternatives to sutures for sealing and closing wounds or incisions because of their ease of use, low cost, minimal tissue damage, and short application time. However, poor mechanical properties and weak adhesion strength limit the application of TAs, although numerous studies have attempted to develop new TAs with enhanced performance. Therefore, next-generation TAs with improved multifunctional properties are required. In this review, we address the requirements of polymeric TAs, adhesive characteristics, adhesion strength assessment methods, adhesion mechanisms, applications, advantages and disadvantages, and commercial products of polysaccharide (PS)-based TAs, including chitosan (CS), alginate (AL), dextran (DE), and hyaluronic acid (HA). Additionally, future perspectives are discussed.

Injectable, Shear-Thinning, Self-Healing, and Self-Cross-Linkable Benzaldehyde-Conjugated Chitosan Hydrogels as a Tissue Adhesive.

Benzaldehyde-conjugated chitosan (CH-CBA) was synthesized by a coupling reaction between chitosan (CH) and carboxybenzaldehyde (CBA). The pH-sensitive self-cross-linking can be achieved through the Schiff base reaction. The degree of substitution (DS) of CH-CBA was controlled at 1.4-12.7% by optimizing the pH and reagent stoichiometry. The dynamic Schiff base linkages conferred strong shear-thinning and self-healing properties to the hydrogels. The viscosity of the 2 wt/v % CH-CBA hydrogel decreased from 5.3 × 107 mPa·s at a shear rate of 10-2 s-1 to 2.0 × 103 mPa·s at 102 s-1 at pH 7.4. The CH-CBA hydrogel exhibited excellent biocompatibility in vitro and in vivo. Moreover, the hydrogel adhered strongly to porcine small intestine, colon, and cecum samples, comparable to commercial fibrin glue, and exhibited effective in vivo tissue sealing in a mouse cecal ligation and puncture model, highlighting its potential as a biomaterial for application in tissue adhesives, tissue engineering scaffolds, etc.

Tissue adhesives based on chitosan for skin wound healing: Where do we stand in this era? A review.

Chitosan has been commonly used as an adhesive dressing material due to its excellent biocompatibility, degradability, and renewability. Tissue adhesives are outstanding among wound dressings because they can close the wound, absorb excess tissue exudate from the wound site, provide a moist environment, and act as a carrier for loading various bioactive molecules. They have been widely used in both preclinical and clinical treatment of skin wounds. This review summarizes recent research progresses in the application of chitosan and its derivatives for tissue adhesives. We also introduce their biomedical effects on wound adhesion, contamination isolation, antibacterial, immune regulation, and wound healing, and the strategies to achieve these functions when used as wound dressings. Finally, challenges and future perspectives of chitosan-based tissue adhesives are discussed for wound healing.

Sprayable tissue adhesive microparticle-magnetic nanoparticle composites for local cancer hyperthermia.

Incomplete removal of early-stage gastrointestinal cancers by endoscopic treatments often leads to recurrence induced by residual cancer cells. To completely remove or kill cancer tissues and cells and prevent recurrence, chemotherapy, radiotherapy, and hyperthermia using biomaterials with drugs or nanomaterials are usually administered following endoscopic treatments. However, there are few biomaterials that can be applied using endoscopic devices to locally kill cancer tissues and cells. We previously reported that decyl group-modified Alaska pollock gelatin-based microparticles (denoted C10MPs) can adhere to gastrointestinal tissues under wet conditions through the formation of a colloidal gel driven by hydrophobic interactions. In this study, we combined C10MPs with superparamagnetic iron oxide nanoparticles (SPIONs) to develop a sprayable heat-generating nanomaterial (denoted SP/C10MP) for local hyperthermia of gastrointestinal cancers. The rheological property, tissue adhesion strength, burst strength, and underwater stability of SP/C10MP were improved through decyl group modification and SPION addition. Moreover, SP/C10MP that adhered to gastrointestinal tissues formed a colloidal gel, which locally generated heat in response to an alternating magnetic field. SP/C10MP successfully killed cancer tissues and cells in colon cancer-bearing mouse models in vitro and in vivo. Therefore, SP/C10MP has the potential to locally kill residual cancer tissues and cells after endoscopic treatments.

Natural polymer-based bioadhesives as hemostatic platforms for wound healing.

Medical adhesives are advanced but challenging alternatives to wound closure and repair, especially in mitigating uncontrolled hemorrhage. Ideal hemostatic adhesives need to meet good biocompatibility and biodegradability, adequate mechanical strength, and strong tissue adhesion functionality under wet and dynamic conditions. Considering these requirements, natural polymers such as polysaccharide, protein and DNA, attract great attention as candidates for making bioadhesives because of their distinctive physicochemical performances and biological properties. This review systematically summarizes the advances of bioadhesives based on natural polysaccharide, protein and DNA. Various physical and chemical cross-linking strategies have been introduced for adhesive synthesis and their hemostatic applications are introduced from the aspect of versatility. Furthermore, the possible challenges and future opportunities of bioadhesives are discussed, providing insights into the development of high-performance hemostatic materials.