Ankle and hindfoot motion of healthy adults during running revealed by dynamic biplane radiography: Side-to-side symmetry, sex-specific differences, and comparison with walking.

This study aimed to characterize ankle and hindfoot kinematics of healthy men and women during overground running using biplane radiography, and to compare these data to those previously obtained in the same cohort during overground walking. Participants ran across an elevated platform at a self-selected pace while synchronized biplane radiographs of their ankle and hindfoot were acquired. Motion of the tibia, talus, and calcaneus was tracked using a validated volumetric model-based tracking process. Tibiotalar and subtalar 6DOF kinematics were obtained. Absolute side-to-side differences in ROM and kinematics waveforms were calculated. Side-to-side and sex-specific differences were evaluated at 10 % increments of stance phase with mixed model analysis. Pearson correlation coefficients were used to assess the relationship between stance-phase running and walking kinematics. 20 participants comprised the study cohort (10 men, mean age 30.8 ± 6.3 years, mean BMI 24.1 ± 3.1). Average absolute side-to-side differences in running kinematics waveforms were 5.6°/2.0 mm or less at the tibiotalar joint and 5.2°/3.2 mm or less at the subtalar joint. No differences in running kinematics waveforms between sides or between men and women were detected. Correlations were stronger at the tibiotalar joint (42/66 [64 %] of correlations were p < 0.05), than at the tibiotalar joint (38/66 [58 %] of correlations were p < 0.05). These results provide a normative reference for evaluating native ankle and hindfoot kinematics which may be informative in surgical or rehabilitation contexts. Sex-specific differences in ankle kinematics during overground running are likely not clinically or etiologically significant. Associations seen between walking and running kinematics suggest one could be used to predict the other.

Validity and reliability of inertial measurement units used to measure motion of the lumbar spine: A systematic review of individuals with and without low back pain.

Low back pain (LBP) is a leading cause of disability, resulting in aberrant movement. This movement is difficult to measure accurately in clinical practice and gold standard methods, such as optoelectronic systems involve the use of expensive laboratory equipment. Inertial measurement units (IMU) offer an alternative method of quantifying movement that is accessible in most environments. However, there is no consensus around the validity and reliability of IMUs for quantifying lumbar spine movements compared with gold standard measures. The aim of this systematic review was to establish concurrent validity and repeated measures reliability of using IMUs for the measurement of lumbar spine movements in individuals with and without LBP. A systematic search of electronic databases, incorporating PRISMA guidelines was completed, limited to the English language. 503 studies were identified where 15 studies met the inclusion criteria. Overall, 305 individuals were included, and 109 of these individuals had LBP. Weighted synthesis of the results demonstrated root mean squared differences of <2.4° compared to the gold standard and intraclass correlations >0.84 for lumbar spine movements. IMUs offer clinicians and researchers valid and reliable measurement of motion in the lumbar spine, comparable to laboratory methods, such as optoelectronic motion capture for individuals with and without LBP.

Retrospective analysis of scaphoid trapezium pyrocarbon implant intervention in STT arthritis: a 3-year follow-up study.

AIM: The purpose of this study was to evaluate clinical, patient rated and radiological outcome of the scaphoid trapezium pyrocarbon implant (STPI) at a minimum of three years follow-up. METHODS: Consecutive patients operated with the STPI due to scaphotrapeziotrapezoidal (STT) arthritis between 2012 and 2019 were included. Patients were evaluated preoperatively and annually after surgery for range of motion, grip strength, key pinch, quick-DASH, pain, and satisfaction. Radiographs were evaluated for implant position, signs of dorsal intercalated segment instability (DISI), capitolunate (CL) angle, scapholunate (SL) distance, and presence of osteophytes. RESULTS: Twenty-six patients (29 implants) were included. Seven implants were revised during the follow up, mainly due to pain: three implants were removed, four patients received a new STPI of a different size, leaving 22 implants in 20 patients available for follow up, 9 males and 11 females. Median age was 61.7 years (51-78 years). Median follow-up time was 68 months (37-105 months). Comparing preoperative status to the last follow-up, wrist extension and deviation, thumb abduction, and grip strength did not change. Key Pinch, quick DASH, pain, and patient satisfaction improved significantly at last follow-up. Radiographic signs of DISI were seen in six cases preoperatively and in 12 cases at last follow-up. CONLUSION: At a minimum of three years follow-up, the STPI used for STT-arthritis improve pain, quick-DASH result, and patient satisfaction significantly. ROM and grip strength did not change compared to preoperative values. Radiographic signs of carpal instability were common at the follow-up and the revision rate was high.

Biomechanical response of decompression alone in lower grade lumbar degenerative spondylolisthesis--A finite element analysis.

BACKGROUND: Previous studies have demonstrated the clinical efficacy of decompression alone in lower-grade spondylolisthesis. A higher rate of surgical revision and a lower rate of back pain relief was also observed. However, there is a lack of relevant biomechanical evidence after decompression alone for lower-grade spondylolisthesis. PURPOSE: Evaluating the biomechanical characteristics of total laminectomy, hemilaminectomy, and facetectomy for lower-grade spondylolisthesis by analyzing the range of motion (ROM), intradiscal pressure (IDP), annulus fibrosus stress (AFS), facet joints contact force (FJCF), and isthmus stress (IS). METHODS: Firstly, we utilized finite element tools to develop a normal lumbar model and subsequently constructed a spondylolisthesis model based on the normal model. We then performed total laminectomy, hemilaminectomy, and one-third facetectomy in the normal model and spondylolisthesis model, respectively. Finally, we analyzed parameters, such as ROM, IDP, AFS, FJCF, and IS, for all the models under the same concentrate force and moment. RESULTS: The intact spondylolisthesis model showed a significant increase in the relative parameters, including ROM, AFS, FJCF, and IS, compared to the intact normal lumbar model. Hemilaminectomy and one-third facetectomy in both spondylolisthesis and normal lumbar models did not result in an obvious change in ROM, IDP, AFS, FJCF, and IS compared to the pre-operative state. Moreover, there was no significant difference in the degree of parameter changes between the spondylolisthesis and normal lumbar models after undergoing the same surgical procedures. However, total laminectomy significantly increased ROM, AFS, and IS and decreased the FJCF in both normal lumbar models and spondylolisthesis models. CONCLUSION: Hemilaminectomy and one-third facetectomy did not have a significant impact on the segment stability of lower-grade spondylolisthesis; however, patients with LDS undergoing hemilaminectomy and one-third facetectomy may experience higher isthmus stress on the surgical side during rotation. In addition, total laminectomy changes the biomechanics in both normal lumbar models and spondylolisthesis models.

Demonstrating the utility of Instrumented Gait Analysis in the treatment of children with cerebral palsy.

BACKGROUND: Instrumented gait analysis (IGA) has been around for a long time but has never been shown to be useful for improving patient outcomes. In this study we demonstrate the potential utility of IGA by showing that machine learning models are better able to estimate treatment outcomes when they include both IGA and clinical (CLI) features compared to when they include CLI features alone. DESIGN: We carried out a retrospective analysis of data from ambulatory children diagnosed with cerebral palsy who were seen at least twice at our gait analysis center. Individuals underwent a variety of treatments (including no treatment) between sequential gait analyses. We fit Bayesian Additive Regression Tree (BART) models that estimated outcomes for mean stance foot progression to demonstrate the approach. We built two models: one using CLI features only, and one using CLI and IGA features. We then compared the models' performance in detail. We performed similar, but less detailed, analyses for a number of other outcomes. All results were based on independent test data from a 70%/30% training/testing split. RESULTS: The IGA model was more accurate than the CLI model for mean stance-phase foot progression outcomes (RMSEIGA = 11∘, RMSECLI = 13∘) and explained more than 1.5 × as much of the variance (R2IGA = .45, R2CLI = .28). The IGA model outperformed the CLI model for every level of treatment complexity, as measured by number of simultaneous surgeries. The IGA model also exhibited superior performance for estimating outcomes of mean stance-phase knee flexion, mean stance-phase ankle dorsiflexion, maximum swing-phase knee flexion, gait deviation index (GDI), and dimensionless speed. INTERPRETATION: The results show that IGA has the potential to be useful in the treatment planning process for ambulatory children diagnosed with cerebral palsy. We propose that the results of machine learning outcome estimators-including estimates of uncertainty-become the primary IGA tool utilized in the clinical process, complementing the standard medical practice of conducting a through patient history and physical exam, eliciting patient goals, reviewing relevant imaging data, and so on.

Radiographic and clinical outcomes of muenster and sugar tong splints for distal radius fractures: a comparative study.

BACKGROUND: Non-operative management is typically indicated for extra-articular distal radius fractures. Conservative treatments such as Sugar tong splints (STs) and Muenster splints (MUs) are commonly used. However, there is limited research and outcome data comparing the two splint types. Therefore, this study aimed to investigate and compare the radiographic and clinical outcomes of treatment using STs and MUs. METHODS: In this retrospective comparative study, we aimed to evaluate and compare the radiographic and clinical outcomes of STs and MUs for the treatment of distal radius fractures. The study included 64 patients who underwent closed reduction (CR) in the emergency room and were treated with either STs or MUs splints (STs group: n = 38, MUs group: n = 26). Initial X-rays, post-CR X-rays, and last outpatient follow-up X-rays were evaluated. Radial height (RH), ulnar variance (UV), radial inclination (RI), and volar tilt (VT) were measured by a blinded investigator. The Quick DASH form was applied to measure patients' satisfaction after treatments. RESULTS: There were no significant differences in baseline characteristics, initial radiographic measurements, or radiographic measurements immediately after CR between the two groups. However, the overall radiological values deteriorated to some degree in both groups compared to the post-CR images. Furthermore, using a paired test, the STs group showed significant differences in RH and RI, and the MUs group showed significant differences in RH and UV between the last follow-up and post-CR images. CONCLUSIONS: The study concluded that there was no difference in clinical outcomes between the two splint types. However, both STs and MUs groups showed reduced radiographic parameters, and the MUs group showed a significant reduction of RH and UV in the treatment of distal radius fractures. LEVEL OF EVIDENCE: Level IV; Retrospective Comparison; Treatment Study.

Efficacy of a high-intensity home stretching device and traditional physical therapy in non-operative management of adhesive capsulitis - a prospective, randomized control trial.

BACKGROUND: Historically, in-person physical therapy serves as a foundational component of nonoperative treatment of adhesive capsulitis (AC). This study compares the effectiveness of an at-home high-intensity stretch (HIS) device to traditional physical therapy (PT) and to PT in combination with the HIS device. We hypothesize that the HIS device will be as effective as PT alone or as combination therapy in the first-line treatment of AC and use of the HIS device will exhibit improvement at higher rate. METHODS: Thirty-four patients with idiopathic adhesive capsulitis and a minimum of 12 months follow-up were included in this study. Patients were randomized into one of the three groups: HIS device, PT alone, or HIS device + PT. Passive range of motion (ROM), American Shoulder and Elbow Surgeons (ASES), and Simple Shoulder Test (SST) scores were measured. Additionally, patient satisfaction, compliance and complications were recorded. Paired t-test, ANOVA and Chi-squared tests were used in analysis. RESULTS: Final ROM in all planes improved for all groups compared to baseline (p < 0.001), with only HIS device group able to restore > 95% of contralateral ROM in all planes at final follow-up. Patients with PT alone were on average slowest to improve ROM from baseline, at 3 months, 6 months, and 1 year in all planes except internal rotation. ASES and SST scores improved for all groups when compared to baseline (p < 0.001). Use of HIS-device resulted in greater improvement in SST and ASES Total scores compared to PT alone (p = 0.045, and p = 0.048, respectively). CONCLUSIONS: Use of an at-home high-intensity stretching device for conservative treatment of idiopathic adhesive capsulitis improves outcomes in ROM and in ASES and SST scores both when used as an adjunct to physical therapy and when used alone. TRIAL REGISTRATION: The study protocol was registered at www. CLINICALTRIALS: gov (20/05/2022, NCT05384093).

Accuracy of conventional motion capture in measuring hip joint center location and hip rotations during gait, squat, and step-up activities.

Accurate measurements of hip joint kinematics are essential for improving our understanding of the effects of injury, disease, and surgical intervention on long-term hip joint health. This study assessed the accuracy of conventional motion capture (MoCap) for measuring hip joint center (HJC) location and hip joint angles during gait, squat, and step-up activities while using dynamic biplane radiography (DBR) as the reference standard. Twenty-four young adults performed six trials of treadmill walking, six body-weight squats, and six step-ups within a biplane radiography system. Synchronized biplane radiographs were collected at 50 images per second and MoCap was collected simultaneously at 100 images per second. Bone motion during each activity was determined by matching digitally reconstructed radiographs, created from subject-specific CT-based bone models, to the biplane radiographs using a validated registration process. Errors in estimating HJC location and hip angles using MoCap were quantified by the root mean squared error (RMSE) across all frames of available data. The MoCap error in estimating HJC location was larger during step-up (up to 89.3 mm) than during gait (up to 16.6 mm) or squat (up to 31.4 mm) in all three anatomic directions (all p < 0.001). RMSE in hip joint flexion (7.2°) and abduction (4.3°) during gait was less than during squat (23.8° and 8.9°) and step-up (20.1° and 10.6°) (all p < 0.01). Clinical analysis and computational models that rely on skin-mounted markers to estimate hip kinematics should be interpreted with caution, especially during activities that involve deeper hip flexion.

The relationship between joint kinematic patterns during single-leg drop landing and perceived instability in individuals with chronic ankle instability.

BACKGROUND: Perceived instability is a primary symptom among individuals with chronic ankle instability. However, the relationship between joint kinematics during landing remains unclear. Therefore, we investigated the relationships between landing kinematics and perceived instability in individuals with chronic ankle instability. METHODS: In 32 individuals with chronic ankle instability, we recorded ankle, knee, and hip joint angles during a single-leg drop landing. Joint angle waveforms during 200 ms before and after initial contact were summarized into single values using two methods: peak joint angles and principal component scores via principal component analysis. Using Spearman's rank correlation coefficient (ρ), we examined the relationships of peak joint angles and principal component scores with the Cumberland Ankle Instability Tool score, with a lower score indicating a greater perceived instability (α = 0.05). FINDINGS: The second principal component scores of ankle angle in the horizontal and sagittal planes significantly correlated with the Cumberland Ankle Instability Tool score (Horizontal: ρ = 0.507, P = 0.003; Sagittal: ρ = -0.359, P = 0.044). These scores indicated the differences in the magnitude of angles before and after landing. Significant correlations indicated a greater perceived instability correlated with smaller internal rotation and plantarflexion before landing and smaller external rotation and dorsiflexion after landing. In contrast, no peak joint angles correlated with the Cumberland Ankle Instability Tool score (P > 0.05). INTERPRETATION: In individuals with chronic ankle instability, ankle movements during landing associated with perceived instability may be a protective strategy before landing and potentially cause ankle instability after landing.

"Could a subset of joint mobility tests define generalized joint hypermobility?": A descriptive observational inception study.

BACKGROUND: Generalized joint hypermobility is an inherited collagen phenotype based on clinical assessments of joint mobility. However, there is no international consensus to define generalized joint hypermobility, both considering which joint mobility tests should be included and limits for joint hypermobility. OBJECTIVES: The primary aim of the study was to identify a subset of joint mobility tests to define generalized joint hypermobility. A further aim was to evaluate standardized limits for the classification of hypermobility in different joint types throughout the body. METHODS: A total of 255 early pregnant women were included in the study. Joint mobility was measured according to a structured protocol. Correlation and principal component analysis were used to find a subset of joint mobility tests. To classify hypermobility in each joint mobility test, five different standard deviation levels plus 0.84, plus 1.04, plus 1.28, plus 1.64 and plus 2 were used, corresponding to 20%, 15%, 10%, 5% and 2.5% of the normal distribution. RESULTS: No subset of joint mobility test could define generalized joint hypermobility. The higher the standard deviation levels, the higher the limit to classify joint hypermobility and the lower the prevalence. As a result of no subset of joint mobility tests were found to define generalized joint hypermobility, different combinations of major and minor joints in upper and lower limbs and the axial skeleton, were systematically developed. These combinations were evaluated for each standard deviation level, resulting in a prevalence of generalized joint hypermobility between 0% and 12.9% and a clear variation in how the hypermobile joint mobility tests were distributed. CONCLUSION: It is probably not possible to choose a subset of joint mobility tests to define GJH. In order not to overlook generalized joint hypermobility, a broader assessment of different joint types and sizes of joints appears to be needed. The prevalence of generalized joint hypermobility is dependent on joint hypermobility limit and the chosen combination of joint mobility tests.

The relation between meniscal dynamics and tibiofemoral kinematics.

Over the past 30 years, research on meniscal kinematics has been limited by challenges such as low-resolution imaging and capturing continuous motion from static data. This study aimed to develop a computational knee model that overcomes these limitations and enables the continuous assessment of meniscal dynamics. A high-resolution MRI dataset (n = 11) was acquired in 4 configurations of knee flexion. In each configuration, the menisci were modeled based on the underlying osseous anatomy. Principal Polynomial Shape Analysis (PPSA) was employed for continuous meniscal modeling. Maximal medial anterior horn displacement occurred in 60° of flexion, equaling 6.24 mm posteromedial, while the posterior horn remained relatively stable. At 90° of flexion, the lateral anterior and posterior horn displaced posteromedially, amounting 5.70 mm and 6.51 mm respectively. The maximal observed Average Surface Distance (ASD) equaled 0.70 mm for lateral meniscal modeling in 90° of flexion. Based on our results, a strong relation between meniscal dynamics and tibiofemoral kinematics was confirmed. Expanding on static meniscal modeling and employing PPSA, we derived and validated a standardized and systematic methodological workflow.

Arthroscopic cuff repair: footprint remnant preserving versus debriding rotator cuff repair of transtendinous rotator cuff tears with remnant cuff.

BACKGROUND: In transtendinous full thickness rotator cuff tears (FTRCT) with remnant cuff, conventionally, cuff remnant of the greater tuberosity (GT) is debrided for better tendon to bone healing. However, larger cuff defect caused overtension on the repaired tendon. The purpose of this study was to compare the clinical outcomes and tendon integrity between remnant preserving and remnant debriding cuff repairs in the transtendinous FTRCT with remnant cuff. METHODS: From March, 2012 to October, 2017, a total of 127 patients who had the transtendinous FTRCT with remnant cuff were enrolled in this study. Rotator cuff tears were repaired arthroscopically, with patients divided into two groups: group I (n = 63), where rotator cuff remnants were preserved during the repair, and group II (n = 64), where the remnants were debrided during the repair. Clinical outcomes were assessed at the last follow-up (minimum 2 years) using the UCLA score, ASES score, SST score, Constant Shoulder score, and range of motion (ROM). The analysis of structural integrity and tendon quality was performed using the Sugaya classification on postoperative MRI scans at 8 months after surgery. RESULTS: At the final follow-up, UCLA, ASES, SST, and CS scores significantly improved from preoperative values to postoperative (all p < 0.05): UCLA (I: 19.6 ± 6.0 to 31.7 ± 3.2, II: 18.0 ± 5.7 to 31.5 ± 3.2), ASES (I: 54.3 ± 10.7 to 86.5 ± 12.5, II: 18.0 ± 5.7 to 85.8 ± 12.4), SST (I: 5.6 ± 2.8 to 10.2 ± 2.0, II: 5.0 ± 2.9 to 10.1 ± 2.5), CS (I: 74.0 ± 17.2 to 87.8 ± 9.7, II: 62.0 ± 19.2 to 88.3 ± 6.2). However, there were no significant differences between the two groups (p > 0.05). Also, remnant preserving cuff repair yielded significantly better tendon quality on postoperative MRI (p < 0.05). The incidence of re-tear (Sugaya's Type IV and V) was not significantly different between the two groups (I:17% vs. II:19%; p = 0.053). CONCLUSIONS: Remnant preserving rotator cuff repairs, which facilitate tendon-to-tendon healing, are superior in terms of tendon quality and are the preferred option for transtendinous FTRCT. TRIAL REGISTRATION: Retrospectively registered.

Lateralising reverse shoulder arthroplasty using bony increased offset (BIO-RSA) or increasing glenoid component diameter: comparison of clinical, radiographic and patient reported outcomes in a matched cohort.

BACKGROUND: This study aims to compare the range of motion (ROM) of reverse shoulder arthroplasty lateralised by bony increased offset (BIO-RSA) using a standard 38-mm (mm) component to regular reverse shoulder arthroplasty (RSA) lateralised by using a 42-mm glenoid component. The secondary aims are to compare patient-reported and radiographic outcomes between the two groups. MATERIALS AND METHODS: All patients with a BIO-RSA and size 38 glenosphere were retrospectively identified and matched to patients with a regular RSA and size 42 glenosphere. Matched patients were invited for a follow-up visit. ROM was assessed as well as radiographic outcomes (lateralisation, distalisation, inferior overhang, scapular notching, heterotopic bone formation, radiolucency, stress shielding, bone graft healing and viability and complications) and patient-reported outcomes (subjective shoulder value, Constant score, American Shoulder and Elbow Surgeons, activities of daily living which require internal rotation, activities of daily living which require external rotation and a visual analogue scale for pain). Outcomes were compared between the two groups. RESULTS: In total, 38 BIO-RSAs with a size 38 glenosphere were matched to 38 regular RSAs with a size 42 glenosphere. Of the 76 matched patients, 74 could be contacted and 70 (95%) were included. At the final follow-up, there were no differences between the two groups in ROM, patient-reported outcomes or radiographic outcomes (p > 0.485). CONCLUSIONS: Using a larger glenosphere is a feasible alternative to BIO-RSA for lateralising RSA, providing comparable ROM, patient-reported and radiographic results, while potentially decreasing costs, operative time and complication rates.

Metacarpophalangeal joint reconstruction using a costal osteochondral graft: A case report.

RATIONALE: The conventional treatment of giant cell tumors is intralesional curettage with local adjuvant therapy. Because hand tumors have a high local recurrence, the primary goal for treating tumors of the hand is to eradicate the lesion. PATIENT CONCERNS: To preserve the metacarpophalangeal (MCP) joint function as well as avoid further recurrence after surgery. DIAGNOSES: The giant cell tumor invades the patient's MCP joint in an index proximal phalanx. INTERVENTIONS: Using computer-aided design and three-dimensional printing techniques, we reformed the original shapes of the MCP joint and its peripheral bone to replica models. The surgeon then performed an en bloc resection and proximal phalanx with MCP joint reconstruction by fabricating the patient's costal osteochondral graft during the operation. OUTCOMES: After 6 months of rehabilitation, the patient's finger functions could pinch and grasp objects naturally. At the 1-year follow-up, the range of motion of the MCP, proximal interphalangeal, and distal interphalangeal joints improved from flexion of 35° to 60°, 75° to 85°, and 60° to 80°, respectively. The hand function achieved the mean performance of non-preferred hands for young females at the postoperative 3-year follow-up. LESSONS: The customized prototyping technique has the potential to replica the original patient's bony graft to reach the goal of minimizing the defects at the donor site and maximizing the function of the reconstructed MCP joint.

Biomechanical Characteristics of Glenosphere Orientation Based on Tilting Angle and Overhang Changes in Reverse Shoulder Arthroplasty.

Background: Glenoid position and inclination are important factors in protecting against scapular notching, which is the most common complication that directly affects the longevity of reverse shoulder arthroplasty (RSA). This study aimed to investigate the biomechanical characteristics of glenosphere orientation, comparing neutral tilt, inferior overhang with an eccentric glenosphere at the same placement of baseplate, and inferior tilt after 10° inferior reaming in the lower part of the glenoid in RSA. Methods: Nine cadaveric shoulders were tested with 5 combinations of customized glenoid components: a centric glenosphere was combined with a standard baseplate (group A); an eccentric glenosphere to provide 4-mm inferior overhang than the centric glenosphere was combined with a standard baseplate (group B); a centric glenosphere was combined with a wedge-shaped baseplate tilted inferiorly by 10° with the same center of rotation (group C); an eccentric glenosphere was attached to a wedge-shaped baseplate (group D); and 10° inferior reaming was performed on the lower part of the glenoid to apply 10° inferior tilt, with a centric glenosphere secured to the standard baseplate for simulation of clinical tilt (group E). Impingement-free angles for adduction, abduction, forward flexion, external rotation, and internal rotation were measured. The capability of the deltoid moment arm for abduction and forward flexion, deltoid length, and geometric analysis for adduction engagement were evaluated. Results: Compared with neutral tilt, inferior tilt at the same position showed no significant difference in impingement-free angle, moment arm capability, and deltoid length. However, group D resulted in better biomechanical properties than a central position, regardless of inferior tilt. Group E demonstrated a greater range of adduction, internal and external rotation, and higher abduction and forward flexion capability with distalization, compared to corresponding parameters for inferior tilt with a customized wedge-shaped baseplate. Conclusions: A 10° inferior tilt of the glenosphere, without changing the position of the baseplate, had no benefit in terms of the impingement-free angle and deltoid moment arm. However, an eccentric glenosphere had a significant advantage, regardless of inferior tilt. Inferior tilt through 10° inferior reaming showed better biomechanical results than neutral tilt due to the distalization effect.

Complications and Reinterventions of Reverse Total Shoulder Arthroplasty in a Korean Population: 14-Year Experience in Reverse Shoulder Arthroplasty.

Background: There are few reports on the revision or reintervention of reverse total shoulder arthroplasty (RTSA) in South Korea. The purpose of this study was to evaluate the true incidence of complications and reintervention of RTSA and clinical and radiological outcomes based on our 14-year experience in RTSA in a Korean population. Methods: Between March 2008 and June 2022, 412 consecutive cases of RTSA were performed in 388 patients with an average age of 74.4 years at our institute. Excluding 23 patients lost to follow-up, 365 patients (373 shoulders including 8 bilateral cases) who underwent primary RTSA with more than 6 months of follow-up were enrolled in this study. We evaluated those who had complications or reintervention including revision RTSA for failed RTSA. Patient charts were reviewed, and clinical outcomes including clinical scores, complications, and reintervention and radiologic outcomes were evaluated at the last follow-up. Results: Among the 373 shoulders that underwent primary RTSA, complications were found in 50 patients (13.94%, 10 men and 40 women with a mean age of 75.9 ± 6.7 years [range, 51-87 years]). The causes of complications were as follows: 13 acromion, coracoid, or scapular spine fractures, 10 loosening (glenoid: 5, humeral stem: 5), 5 infections, 4 periprosthetic fractures, 2 instability, 2 neurologic complications, and 14 miscellaneous complications. Twenty patients (5.63%, 4 men and 16 women with a mean age of 74.2 ± 8.2 years [range, 51-87 years]) underwent reintervention. The interval to the first reintervention was 27.8 ± 23.1 months (range, 0.1-78 months). The causes of reintervention (20 cases) were 8 loosening (glenoid: 4, humeral stem: 4), 5 infections, 5 fractures, and 2 instability. Among them, 15 component revisions (4.02%) were performed. At the last follow-up, American Shoulder and Elbow Surgeons, University of California at Los Angeles, and Simple Shoulder Test scores were improved from 25.4, 12.4, and 1.6 preoperatively to 40.4, 16.2, and 3.2, respectively. Forward flexion (48° to 87°), abduction (52° to 79°), external rotation (18° to 22°), and internal rotation (buttock to L2) were improved. Conclusions: After primary RTSA in a Korean population, the complication, reintervention, and revision rates were 13.94%, 5.63%, and 4.02%, respectively. Careful evaluation of the complications and adequate treatments should be performed.

Long-Term Outcomes of High-Flexion Design Total Knee Arthroplasty with a Short Posterior Flange.

Background: The purpose of this study was to evaluate the clinical and radiological outcomes of high-flexion total knee arthroplasty (TKA) using Vega Knee System (B. Braun, Aesculap) at a long-term follow-up and to analyze the implant survivorship. Methods: We enrolled 165 patients (232 knees) with a minimum 7-year follow-up after TKA (VEGA Knee System). For clinical assessment, range of motion (ROM), Knee Injury and Osteoarthritis Outcome Score (KOOS), and Western Ontario and McMaster University Osteoarthritis Index (WOMAC) were used. For radiologic assessment, hip-knee-ankle angle, component position, and the existence of radiolucent lines and loosening were used. Survival analysis was conducted using the Kaplan-Meier method. Results: The mean follow-up period was 9.8 years. The mean ROM increased from 124.4° to 131.4° at the final follow-up. The WOMAC score decreased from 38.5 to 17.4 at the final follow-up (p < 0.001). All 5 subscales of the KOOS improved at the final follow-up (all subscales, p < 0.001). Revision TKA was performed in 10 cases (4.3%), which included 9 cases of aseptic loosing and 1 case of periprostatic joint infection. Of the 9 aseptic loosening cases (3.9%), 8 cases (3.4%) were loosening of the femoral component and 1 case (0.4%) was loosening of the tibial component. When revision for any reason was considered an endpoint, the 10-year survivorship was 96.2% (95% confidence interval [CI], 93.9%-98.5%). On the other hand, when revision for aseptic loosening was considered the endpoint, the 10-year survivorship was 96.6% (95% CI, 94.4%-98.8%). Conclusions: The Vega Knee System provided good clinical results in the long-term follow-up period. Although the VEGA Knee System showed acceptable implant survivorship, loosening of the femoral component occurred in about 3.4% of the patients. For more accurate evaluation of the survivorship of high-flexion design TKA with a short posterior flange, it is necessary to conduct more long-term follow-up studies targeting diverse races, especially Asians who frequently perform high-flexion activities.

Cervicocephalic kinaesthesia reveals novel subgroups of motor control impairments in patients with neck pain.

Cervical-spine sensorimotor control is associated with chronicity and recurrence of neck pain (NP). Tests used to measure sensorimotor impairments lack consistency in studied parameters. Interpretation is often based on either a handful or numerous parameters, without considering their possible interrelation. Different aspects of motor-control could be studied with different parameters, but this has not yet been addressed. The aim of this study was to determine if different parameters of cervical position (JPE) and movement (Butterfly) sense tests represent distinct components of motor-control strategies in patients with chronic NP. Principal component analysis performed on 135 patients revealed three direction-specific (repositioning from flexion, extension or rotations) and one parameter-specific (variability of repositioning) component for JPE, two difficulty-specific (easy or medium and difficult trajectory) and one movement-specific (undershooting a target) component for Butterfly test. Here we report that these components could be related to central (neck repositioning and control of cervical movement) and peripheral sensorimotor adaptations (variability of repositioning) present in NP. New technologies allow extraction of greater number of parameters of which hand-picking could lead to information loss. This study adds towards better identification of diverse groups of parameters offering potentially clinically relevant information and improved functional diagnostics for patients with NP.

Fragment excision and triceps V-Y advanced reattachment using suture anchor for olecranon nonunion: A case report.

RATIONALE: The nonunion of olecranon fractures is uncommon in simple fractures, and it is challenging to treat surgically due to the disruption of the anatomy of the elbow joint. There is limited literature on surgical options, and several factors to determine the treatment, including the amount and quality of bone stock, age, and degree of articular damage. PATIENT CONCERNS: A 58-year-old man presented at the clinic with neglected olecranon fracture for 1 year (case 1). A 74-year-old man (case 2) presented with consistent pain and limited of motion after surgery for olecranon fracture. DIAGNOSIS: Both patients were diagnosed with olecranon nonunion. INTERVENTION: Both patients received the excision of nonunited fragment and reattaching with V-Y advancement of triceps. OUTCOMES: Range of motion and Mayo elbow performance score were improved after surgery. LESSONS: This technique is useful in patients who cannot undergo other surgical options due to insufficient bone quality and elbow function, and it can lead to satisfactory outcomes with an acceptable range of motion and pain relief.

[A multicenter clinical study on the treatment of lateral epicondylitis of humerus by manipulation].

OBJECTIVE: To investigate clinical effect of tendons pulling,poking and kneading for the treatment of external humeral epicondylitis. METHODS: From January 2018 to December 2021,a multicenter randomized controlled study was performed to collect 192 patients with external humeral epicondylitis in Wangjing Hospital,Beijing Dianli Hospital,and Beijing Fengsheng Osteotraumatology Hospital,respectively,and they were divided into treatment group and control group by random number table method. There were 96 patients in treatment group,including 36 males and 60 females,aged from 28 to 60 years old with an average of (41.20±5.50) years old;the course of disease ranged from 1 to 14 days with an average of (5.24±1.35) days;they were treated once every other day for 2 weeks. There were 96 patients in control group ,including 33 males and 63 females,aged from 26 to 60 years old with an average of (43.35±7.75) years old;the course of disease ranged from 1 to 14 days with an average of (5.86±1.48) days;they were treated with topical voltaalin combined with elbow joint fixation for 2 weeks. Visual analogue scale (VAS) and Hospital for Surgery Scoring System (HSS) elbow pronation and supination angles,wrist metacarpal flexion and dorsal extension angles,elbow tenderness between two groups were compared before treatment and at 1,3,5,7,11 and 13 days after treatment;Hospital for Surgery Scoring System 2 (HSS2) was compared before treatment and the final treatment. RESULTS: All patients were followed up for 10 to 14 days with an average of (12±1.6) days. VAS between treatment group and control group before treatment were 6.83±1.36 and 6.79±1.58,respectively,and decreased to 1.49±1.09 and 2.11±1.81 after the final treatment. VAS of treatment group were significantly lower than those of control group at 1,3,5,7,9,11 and 13 days after treatment (P<0.05). HSS between two groups were 61.73±11.00 and 36.47±12.45 before treatment,respectively,and increased to 94.42±5.9 and 91.44±9.11 at the final treatment. HSS of treatment group were significantly higher than those of control group at 1,3,5,7,9,11 and 13 days after treatment (P<0.05). On the 5th day after treatment,the external and internal rotation angles of elbow in treatment group were (66.41±12.69) ° and (66.35±13.54) °,while those in control group were (62.08±16.03) ° and (61.77±16.35) °. On the 7th day after treatment,the external and internal rotation angles of elbow were (69.79±12.64) ° and (70.02±13.55) ° in treatment group,and (65.28±15.86) ° and (65.09±16.67) ° in control group. Elbow joint motion in treatment group was higher than that in control group (P<0.05). On the 5th day after treatment,angles of wrist dorsiflexion and palm flexion were (39.43±15.94) ° and (46.68±11.10) ° in treatment group,and (38.51±18.49) ° and (44.27±13.58) ° in control group. On the 7th day after treatment,angles of wrist dorsiflexion and palm flexion were (42.52±16.50) ° and (49.23±10.96) ° in treatment group,and (41.18±20.09) ° and (46.64±14.63) ° in control group. The motion of wrist joint in treatment group was higher than that in control group (P<0.05). On the 13th day after treatment,HSS2 in treatment group 93.61±6.32 were higher than those in control group 92.06±7.94(P<0.05). There was no significant difference in elbow tenderness between two groups at each time point (P>0.05). CONCLUSION: Voltaren external treatment combined with elbow fixation and tendons pulling,poking and kneading could effectively improve symptoms of external humeral epicondylitis. Compared with voltaren external treatment,tendons pulling,poking and kneading has advantages of longer analgesic time and better elbow function recovery.