Sensory properties of thickened and protein-enriched plant-based frozen desserts.

The number of consumers following plant-based diets has increased and in turn, the variety of plant-based foods available on the market has also increased. Many plant-based foods aim to mimic the functionality and sensory properties of conventional dairy products; however, they may not be suitable for specific populations. Dysphagia, for example, is a swallowing condition requiring texture-modified foods that meet specific criteria. While many conventional thickened products exist that are safe for individuals with dysphagia, the growing interest in plant-based eating alongside the increasing prevalence of dysphagia prompts a need for research on the use and safety of thickened plant-based alternatives. This study investigated the sensory properties of a thickened protein-enhanced ice cream (dairy and whey) compared to thickened protein-enhanced plant-based frozen desserts (cashew and pea, and coconut and pea). The formulations were evaluated using the International Dysphagia Diet Standardization (IDDSI) Spoon Tilt Test and a sensory trial (n = 104 participants, 47 flexitarians and 57 typical consumers) using static (hedonic scales and check-all-that-apply [CATA]), and dynamic (temporal check-all-that-apply (TCATA)) methods. The dairy and whey sample consistently passed the IDDSI test, while the plant-based samples did not. TCATA identified that the plant-based samples had an increased cohesiveness and adhesiveness, and decreased slipperiness when compared to the dairy and whey sample. The differences in textural properties may explain why the plant-based samples did not pass the IDDSI test. The study identified that although plant-based foods strive to mimic conventional dairy products, they have different textural and flavor properties.

Context matters: environmental microbiota from ice cream processing facilities affected the inhibitory performance of two lactic acid bacteria strains against Listeria monocytogenes.

IMPORTANCE: Antilisterial LAB strains have been proposed as biological control agents for application in food processing environments. However, the effect of resident food processing environment microbiota on the performance on antilisterial LAB strains is poorly understood. Our study shows that the presence of microbiota collected from ice cream processing facilities' environmental surfaces can affect the attachment and inhibitory effect of LAB strains against L. monocytogenes. Further studies are therefore needed to assess whether individual microbial taxa affect antilisterial properties of LAB strains and to characterize the underlying mechanisms.

Freeze-thaw stability of Pickering emulsion stabilized by modified soy protein particles and its application in plant-based ice cream.

Pickering emulsions are of great interest to the food industry and their freeze-thaw stability important when used in frozen foods. Particles of soybean isolate (SPI) were heat treated and then crosslinked with transglutaminase (TG) enzyme to produce Pickering emulsions. The protein particles produced using unheated and uncrosslinked SPI (NSPI) was used as the benchmark. The mean particle size, absolute zeta potential, and surface hydrophobicity of protein particles produced using heat treatment and TG crosslinking (at 40 U/g) SPI (HSPI-TG-40) were the highest and substantially higher than those produced using NSPI. The thermal treatment of protein particles followed by crosslinking with TG enzyme improved the freeze-thaw stability of Pickering emulsions stabilized by them. The Pickering emulsions produced using HSPI-TG-40 had the lowest temperature for ice crystal formation and they had better freeze-thaw stability. The plant-based ice cream prepared by HSPI-TG-40 particle-stabilized Pickering emulsions had suitable texture and freeze-thaw stability compared to the ice cream produced using NSPI. The Pickering particles produced using heat treatment of SPI followed by crosslinking with TG (at 40 U/g) produced the most freeze-thaw stable Pickering emulsions. These Pickering particles and Pickering emulsions could be used in frozen foods such as ice cream.

Ice cream with sucralose, stevioside, and erythritol as sugar substitutes: Sensory profile and customer preference.

Sugar-free food has been gaining popularity because of low-calorie content. But sugar replacement by high-intensity sweeteners can negatively affect sensory. In this study, the effect of the addition of sucralose (Suc), stevioside (Ste), and erythritol (Ery) as sugar substitutes on the sensory profile and overall acceptance of ice cream were evaluated by penalty analysis (PA) based on the check-all-that apply (CATA) method, with those of the partial least squares (PLS) regression. Twelve sweetening agents of ice cream samples were presented to 106 consumers who answered on an overall liking question using the 15-point hedonic scale and a CATA question with 32 attributes that described the sensory characteristics of ice cream. The results showed that mixed sweeteners (60%Suc+20%Ste+20%Ery or 60%Suc+10%Ste+30%Ery) can present an advantageous performance when used separately, and making ice cream similar to that of sucrose (Sac) added. Adding Suc, Ste, and Ery to ice cream hardly felt bitterness, astringency, and chemical-like sensations of the sweetening agent. The significant difference between different sweeteners is the intensity and speed of sweetness. Developing combination of high-potency sweeteners that can make sweetness appear quickly could open up new ways to design sugar-free ice cream.

Determination of Cannabinoids in Cannabis sativa Oil and Infused Ice Cream by LC-DAD Method.

BACKGROUND: Cannabis sativa is known to produce a class of terpenophenolic compounds named cannabinoids. The two main ones are cannabidiol (CBD) and tetrahydrocannabinol (THC), which have therapeutic properties. In the development of cannabis-based preparations, it is important to have suitable analytical methods for the analysis of the principal cannabinoids. OBJECTIVE: This study aimed to develop and validate a simple and rapid HPLC method with photodiode array detection for determination of CBD and THC in Cannabis sativa oil extract and infused ice cream, including a stability study. METHOD: Chromatographic separation of CBD and THC was performed with a C18 column, with a mobile phase consisting of acetonitrile and water with formic acid (80 + 20 v/v) in isocratic elution mode, with detection at 208 nm for CBD and 280 nm for THC and 1.0 mL/min flow rate. RESULTS: The method was linear over a range of 1-5 µg/mL for CBD, and 20-100 µg/mL for THC; the relative standard deviation was <3.6%, the recovery ranged between 98.8 and 102.5% for oil and between 84 and 94% for ice cream, QL was 0.33 µg/mL for CBD and 2.30 µg/mL for THC, and the assay demonstrated adequate selectivity. CBD and THC were stable for at least 28 days under light protection at 22°C, 4°C, and -20°C in the oil and for at least 60 days at -20°C in the ice cream. CONCLUSIONS: The results showed that the method was suitable for quantitative determination of CBD and THC in Cannabis sativa oil extract and infused ice cream, and it is useful for quality control purposes. HIGHLIGHTS: The method is simple and fast, and it is useful for the quality control of a new product corresponding to an ice cream based on a Cannabis sativa oil extract.

Comparison of the taste and acceptability of a new high protein ice cream (Nottingham-Ice cream) with standard hospital milkshake oral nutritional supplement in older people with fragility fractures: a short report.

INTRODUCTION: Oral nutritional supplement (ONS) prescription iscommonly recommended for older patients with hip fractures. However, ONS compliance is often low. Ice cream may be a promising nutritional intervention. Using a Plan-Do-Study Act methodology we describe the second cycle of a project using an ice cream based nutritional supplement called Nottingham-Ice cream (N-ICE CREAM) to address malnutrition in older adults. The project aimed to identify whether N-ICE CREAM is a suitable option/alternative to standard ONS. METHODS: Fifty older (≥ 65 years) inpatients with hip or spine fractures were recruited. Both groups received two days each of N-ICE CREAMand milkshake ONS. We measured compliance, acceptability (rating 0"dislike a lot" to 7 "like a lot"), attitudes towards prescription length (rating 0 "very unconfident" to 4 "very confident") and preference. RESULTS: Mean (standard deviation, SD) patient age was 80.6 (7.7) years. The majority (n = 21, 67.7%) preferred N-ICE CREAM. Mean compliance to N-ICE CREAM was greater in both groups (group A (n = 22) 69.9 (30.0)% and group B (n = 26) 56.3 (39.3)%) compared to milkshake ONS (group A (n = 22) 43.4 (4.7)% and group B (n = 26) 53.6 ± (40.2)%). Mean acceptability ratings were higher for N-ICE CREAM, thus the overall impression score was greater. Confidence score for both products decreased with increasing time. CONCLUSIONS: N-ICE CREAM is more accepted by older patients with hip or spine fractures compared to milkshake ONS. Further research should explore long-term compliance and clinical outcomes.

Physico-chemical and Sensory Properties of Red Palm Oil-based Ice Cream Using Maltodextrin or Modified Starch as Stabilizers.

This study highlights the use of red palm oil (RPO) as an alternative to dairy fat in a hard ice cream sample in the presence of different stabilizers; maltodextrin (MALTOD) and modified starch (MSTARCH). No stabilizer was added in the control sample (CO), while the different ratios of RPO to each stabilizer were 4:1, 3:2, and 2:3, coded as MALTOD1, MALTOD2, MALTOD3 for maltodextrin, and MSTARCH1, MSTARCH2, and MSTARCH3 for modified starch, respectively. These samples were compared regarding overrun, physical, and sensory properties. For MALTOD, sample MALTOD3 had the highest overrun (49.31±13.78%), while MALTOD2 had the highest viscosity (7.90±0.03 Pa.s) and hardness (1.09±0.07 kg), and MALTOD1 had the lowest melting properties (61.10±0.20%). For MSTARCH, sample MSTARCH1 had the highest hardness (3.39±0.07 kg), MSTARCH2 had the highest overrun (67.64±2.27%), and MSTARCH3 had the highest viscosity (8.19±0.24 Pa.s) and the lowest melting properties (39.83±0.20%). Samples MALTOD3 and MSTARCH1 were selected for comparison with commercial samples in terms of sensory acceptance and preference. There was no significant difference (p > 0.05) between the sensory acceptability of MALTOD3 and MSTARCH1. However, both samples received a significantly lower (p < 0.05) ranking than the commercial samples in terms of appearance, texture, flavour, meltability, and overall acceptance. Future studies are recommended to improve the RPO-based ice cream sample, particularly in terms of its sensory properties.

Extraction of pectin from watermelon and pomegranate peels with different methods and its application in ice cream as an emulsifier.

Pectin extraction from watermelon peel (WP) and pomegranate peel (PP) was carried out using three different extraction methods: classical solvent extraction (CSE), ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE). Extraction parameters (pH, temperature, time, and speed/amplitude/power) were optimized to target maximum crude pectin yield (CPY), while the sample-to-solvent ratio (SS) was determined to be fixed at 1:10 w/v at all experiments. CPY was increased by low pH, high temperature, and long time. The pectins obtained at optimum conditions were characterized regarding the physicochemical and rheological properties, and the pectin solutions were found to be typical pseudoplastic fluids. WP pectin extracted with MAE and PP pectin extracted with UAE were determined to have the best emulsifying properties and added to the ice cream formulations. MAE had the maximum CPY of 9.40% for WP (pH = 1.3, 6 min, 596 W) and the best emulsifying properties. UAE had the best emulsifying properties for PP and the CPY was 11.56% in conditions of pH = 1.5, a temperature of 69°C, an extraction time of 29 min, and a 32% amplitude. The use of PP pectin resulted in a significant increase in the apparent viscosity of ice cream mix and also the first dripping time and the hardness of ice cream over commercial emulsifier. Melting properties and hardness values of ice cream with WP pectin were comparatively closer to those of ice cream with commercial emulsifier. On the other hand, the first dripping time and hardness value of ice cream with PP pectin having 60.25 min and 3.84 N, respectively, were higher than those of commercial ice cream having 53.75 min and 2.14 N, respectively. Practical Application: The utilization of WP and PP, which are good sources for pectin production, benefits both a sustainable environment and a sustainable food industry. Pectin extracted from WP and PP as an emulsifier in ice cream can ensure the production of ice creams with good melting properties. Pectin can be used as a healthy, sustainable, and economical alternative emulsifier in the ice cream industry.

Optimization of L-glutaminase production by Monascus ruber URM 8542 isolated from ice cream industrial effluent.

L-glutaminase is a hydrolytic enzyme with wide biotechnological applications. Mostly, these enzymes are employed in the feed industry for flavor enhancement and acrylamide mitigation. Also, L-glutaminase may have antiviral and antineoplastic effects making it a good choice for pharmaceutical applications. In this study, the strain Monascus ruber URM 8542 was identified through classical and molecular taxonomy using partial sequencing of ß-tubulin and calmodulin genes. Subsequently, the optimal culture conditions were evaluated by submerged fermentation (L-glutamine 10 g.L- 1) for L-glutaminase excretion. The isolate was identified as M. ruber URM 8542 which showed significant extracellular enzyme production with a yield of 11.4 times in relation to the specific activity of intracellular L-glutaminase. Regarding the optimization experiments, several factors such as L-glutamine concentration, temperature, and pH were compared using a full factorial design (23). The concentrations greater than 1% proved to be significantly better for glutaminase production (R2 = 0.9077). Additionally, the L-glutaminase was optimally active at pH 7.0 and 30 ºC. The L-glutaminase was remarkably stable across an alkaline pH range (7.0-8.0) and had a thermal stability ranging from 30 ºC to 60 ºC for 1 h. Taken together, these findings suggest that the L-glutaminase produced by M. ruber is a promising candidate for pharmacological application, although further studies need to be performed. To the best of our knowledge, this is the first report of L-glutaminase production by Monascus ruber.

Production and functional evaluation of nonfat dry milk with whey proteins as fibrils.

Commercial manufacturing of dairy products involves the addition of dairy ingredients (such as nonfat dry milk and milk protein concentrates), as well as nondairy additives (such as gums, stabilizers, emulsifiers, and texture modifiers) to get the best product appearance, maintain the product quality, and extend shelf life. Though these nondairy additives are not harmful, consumers do not prefer them in dairy food formulations. Therefore, the dairy industry is working on improving the inherent functionality of dairy ingredients using different processes. Recently, fibrillation emerged as a new technique to convert globular proteins such as whey proteins into fibrils, which provide enhanced viscosity, foaming, and emulsification capacity. Therefore, skim milk was subjected to microfiltration followed by ultrafiltration of microfiltration permeate to fractionate whey proteins. Then, whey proteins were selectively fibrillated and mixed back with other streams of microfiltration and ultrafiltration to get fibrillated skim milk. Fibrillated skim milk was spray-dried to get fibrillated nonfat dry milk (NDM). Visible whey protein fibrils were observed in reconstituted fibrillated NDM, which showed survival of fibrils in fibrillated NDM. Fibrillated NDM showed significantly higher viscosity than control NDM. Fibrillated NDM also showed higher emulsification capacity, foaming capacity, and stability than the control NDM but lower gel strength. Considering the improved functionality of fibrillated NDM, they can be used in product formulations such as ice cream mix, where the thickening of a solution, good emulsification, and foaming properties are required.

Low oil Pickering emulsion gels stabilized by bacterial cellulose nanofiber/soybean protein isolate: An excellent fat replacer for ice cream.

Food-grade Pickering emulsion gels with different oil phase fractions stabilized by Bacterial cellulose nanofibers/Soy protein isolate complex colloidal particles were prepared by one-step method. The properties of Pickering emulsion gels with different oil phase fractions (5 %, 10 %, 20 %, 40 %, 60 %, 75 %, v/v) and their applications in ice cream were investigated in the present study. The microstructural results showed that Pickering emulsion gels with the low oil phase fractions (5 %-20 %) were an emulsion droplet-filled gel, where the oil droplets were embedded in the network structure of cross-linked polymer, while Pickering emulsion gels with higher oil phase fractions (40 %-75 %) were an emulsion droplet-aggregated gel, which formed a network structure by flocculated oil droplets. The rheology result showed that the low oil Pickering emulsion gels had the same excellent performance as the high oil Pickering emulsion gels. Furthermore, the low oil Pickering emulsion gels showed good environmental stability under harsh conditions. Consequently, Pickering emulsion gels with 5 % oil phase fraction were used as fat replacers in ice cream and ice cream with different fat replacement rates (30 %, 60 % and 90 %, w/w) was prepared in this work. The results showed the appearance and texture of the ice cream with low oil Pickering emulsion gels as fat replacers was similar to that of the ice cream with no fat replacers, and the melting rate of the ice cream with low oil Pickering emulsion gels as fat replacers showed the lowest value of 21.08 % during the 45 min of melting experiment, as the fat replacer rate in the ice cream reached to 90 %. Therefore, this study demonstrated that low oil Pickering emulsion gels were excellent fat replacers and had great potential application in low calorie food production.

Bioavailability of Macroelements from Synbiotic Sheep's Milk Ice Cream.

To determine the potential bioavailability of macroelements (Ca, Mg, P, K), probiotic ice cream samples (Lactaseibacillus paracasei L-26, Lactobacillus casei 431, Lactobacillus acidophilus LA-5, Lactaseibacillus rhamnosus and Bifidobacterium animalis ssp. lactis BB-12) from sheep's milk with inulin, apple fiber and inulin, or apple fiber and control samples were submitted to in vitro digestion in the mouth, stomach and small intestine. The bioavailability of calcium in the ice cream samples ranged from 40.63% to 54.40%, whereas that of magnesium was 55.64% to 44.42%. The highest bioavailability of calcium and magnesium was shown for the control samples. However, adding 4% inulin reduced the bioavailability of calcium by about 3-5% and magnesium only by about 5-6%. Adding 4% apple fiber reduced the bioavailability of calcium by as much as 6-12% and magnesium by 7-8%. The highest bioavailability of calcium was determined in ice cream with L. paracasei, and the highest bioavailability of magnesium was determined in ice cream with L. casei. The bioavailability of phosphorus in ice cream ranged from 47.82% to 50.94%. The highest bioavailability of phosphorus (>50%) was in sheep ice cream fermented by B. animalis. In the control ice cream, the bioavailability of potassium was about 60%. In ice cream with inulin, the bioavailability of potassium was lower by 3-4%, and in ice cream with apple fiber, the bioavailability of potassium was lower by up to 6-9%. The bioavailability of potassium was significantly influenced only by the addition of dietary fiber. The results of the study confirmed the beneficial effect of bacteria on the bioavailability of Ca, Mg and P.

Psychrotrophic Bacteria Equipped with Virulence and Colonization Traits Populate the Ice Cream Manufacturing Environment.

Several microbial taxa have been associated with food processing facilities, and they might resist by attaching on tools and equipment even after sanitation procedures, producing biofilms that adhere to the surfaces and might embed other microorganisms, including spoilers and pathogens. There is increasing evidence that these communities can be transferred to the final product. To explore the microbial contamination routes in a facility producing ice creams, we collected foods and environmental swabs from industrial surfaces of equipment and tools and performed taxonomic and functional analyses of the microbial DNA extracted from the environmental samples. Our results suggest that complex communities dominated by psychrotrophic bacteria (e.g., Pseudomonas and Acinetobacter spp.) inhabit the food processing environment, and we demonstrate that these communities might be transferred from the surfaces to the products. Functional analysis performed on environmental samples highlighted the presence of several genes linked to antimicrobial resistance and adherence on abiotic surfaces; such genes were more abundant on food contact (FC) than on other surfaces. Metagenome-assembled genomes (MAGs) of Pseudomonas stutzeri showed genes linked with biofilm formation and motility, which are surely linked to colonizing capabilities in the processing lines. The study highlights clear potential advantages of applying microbiome mapping in the food industry for source tracking of microbial contamination and for planning appropriate ad hoc sanitization strategies. IMPORTANCE Several microbial species might permanently establish in food processing facilities, thus contributing to food loss. In fact, food contact surfaces might transfer microorganisms to intermediates and products, potentially representing a hazard to human health. In this work, we provide evidence of the existence of complex microbial communities overcoming sanitation in an ice cream-producing facility. These communities harbored several genes that could potentially lead to attachment to surfaces and antimicrobial resistance. Also, prediction of routes of contamination showed that several potential spoilage taxa might end up in the final product. Importantly, in this work, we show that mapping the environmental microbiome is a high-resolution technique that might help food business operators ensure food quality and safety through detection of potentially hazardous microorganisms.

The impact of glycerol monostearate's similarity to fats and fatty acid composition of fats on fat crystallization, destabilization, and texture properties of ice cream.

BACKGROUND: Fat significantly affects the properties of ice cream. Prior studies have investigated the correlation between fat crystallization, fat destabilization, and ice cream quality. However, the role of fatty acid composition, the similarity between fat and emulsifier in these characteristics, and their impact on final product quality remains unclear. RESULTS: To investigate the influence of the fatty acid composition of fats, as well as their similarity to glycerol monostearate (GMS), on fat crystallization and destabilization during the aging and freezing stages, ice creams were formulated using a combination of two types of fats (coconut oil and palm olein) in five different ratios. In oil phases, decreased saturation of fatty acids (from 93.38% to 46.69%) and increased similarity to GMS (from 11.96% to 46.01%) caused a reduction in the maximum solid fat content. Moreover, the rise in unsaturated long-chain fatty acids (from 34.61% to 99.57%) and similarity to GMS enhanced the formation of rare and coarse fat crystals, leading to a sparse crystalline network. This, in turn, reduced the crystallization rate and the stiffness of the fat in emulsions. Assuming consistent overrun across all ice creams, the enhanced interactions between fat globules in ice cream improved its hardness, melting properties, and shrinkage. CONCLUSION: The crystalline properties of fat in emulsions were influenced by oil phases, impacting fat destabilization and ultimately enhancing the quality of ice cream. The present study offers valuable insights for the optimization of fat and monoglyceride fatty acid ester selection, with the potential to improve ice cream quality. © 2023 Society of Chemical Industry.

Physical and sensory properties of soy-based ice cream formulated with cold-pressed high oleic low linolenic soybean oil.

The effect of cold-pressed SOYLEIC™ soybean oil (SOYLEIC) on the physical and sensory properties of soy-based ice cream was compared to commercial vegetable oil (COM-VO), commercial high oleic soybean oil (COM-HO), and heavy cream (CREAM). Fat sources had no significant effect on viscosity and fat globule size distribution of ice cream mixes. Ice cream made with COM-VO had the lowest overrun (p < 0.05) and higher degree of fat destabilization; however, no difference in hardness was found. Despite similar melting rate, the shape retention behavior during melting was different for SOYLEIC, COM-VO, and COM-HO compared to CREAM. No significant differences were found in texture attributes except mouth coating, which was higher for CREAM than COM-HO and SOYLEIC (p < 0.05). There was no significant difference in flavor attributes between SOYLEIC and CREAM, while COM-VO and COM-HO had higher off-flavor intensities (p < 0.05). Consumer acceptability results revealed that SOYLEIC and CREAM had significantly higher flavor liking and overall liking scores than COM-VO and COM-HO (p < 0.05). SOYLEIC and CREAM also had higher texture liking than COM-VO (p < 0.05). Overall, liking had the highest positive significant correlation with flavor liking (r = 0.996). PRACTICAL APPLICATION: Cold-pressed HOLL soybean oil has the potential to be used in formulating plant-based frozen desserts with equivalent texture but more acceptable flavor.

Low-fat ice cream model system: impact of incorporation of alcalase hydrolyzed zein.

Research on fat substitutes with low calories and good flavor is important to reduce the fat content in food. In this paper, the selection of fat substitutes and the preparation of low-fat ice cream were carried out through looking at the emulsion properties of the enzymatic hydrolysis of zein. The results showed that the emulsifying activity of zein after enzymatic hydrolysis for 10 min was 66.76 m2 g-1, and the emulsifying stability was 78.51 min, showing the best emulsifying properties. Enzymatic hydrolysis of zein can effectively reduce the degree of lipid oxidation. The protein digestibility in intestinal juice was also significantly improved, and the release rate of free fatty acids in the emulsion reached more than 80%. The viscosity, shear stress, elastic modulus, electronic nose and electronic tongue of ice cream with 10% oil substitute were close to those of full-fat ice cream. It is expected to provide a basis for the development of functional foods.

Study of Water Freezing in Low-Fat Milky Ice Cream with Oat ß-Glucan and Its Influence on Quality Indicators.

The work is devoted to the study of the functional and technological properties of oat ß-glucan in low-fat milky ice cream (2% fat) in comparison with the stabilization system Cremodan® SI 320. ß-glucan (0.5%) has a greater effect on the cryoscopic temperature of ice cream mixes than Cremodan® SI 320 in the same amount (decrease by 0.166 °C vs. 0.078 °C), which inhibits the freezing process of free water in ice cream during technological processing in the temperature range from -5 to -10 °C. Microscopy of ice cream samples after freezing and hardening shows the ability of ß-glucan to form a greater number of energy bonds due to specific interaction with milk proteins. Analysis of the microstructure of ice cream samples during 28 d of storage confirms the ability of oat ß-glucan to suppress the growth of ice crystals more effectively than Cremodan® SI 320. Oat ß-glucan gives ice cream a rich creamy taste, increases overrun and resistance to melting, which brings this type of frozen dessert closer to a full-fat analogue (10% fat).

Evaluation of the sensory properties of thickened and protein-enhanced ice cream using check-all-that-apply and temporal check-all-that-apply.

Ice cream formulations with varying amounts of added whey protein were created for those living with dysphagia in long-term care facilities (LTCs) to improve protein and fluid intake. The samples of thickened ice cream included a control (0% whey protein [WP]) and formulations with 6% (6WP), 8% (8WP), 10% (10WP), 12% (12WP) and 14% (14WP) added whey protein by volume. The consistency of the samples was assessed using the International Dysphagia Diet Standardization Initiative (IDDSI) Spoon Tilt Test, a sensory trial (n = 102) using hedonic scales and check-all-that-apply (CATA) and another sensory trial (n = 96) using temporal check-all-that-apply (TCATA). The whey protein increased the acceptability of the thickened ice cream except for the 12WP and 14WP formulations. The formulations with higher amounts of whey protein were associated with bitterness, custard/eggy flavor, and mouthcoating. The TCATA identified that the addition of whey protein led to slippery, gritty, and grainy attributes being perceived in the thickened ice cream. The study identified that 10% whey protein by volume can be added to thickened ice cream without impacting its' acceptability and the 6WP, 8WP, and 10WP formulations were liked significantly more than the control (without whey protein).

Modulation of the crystallization of rapeseed oil using lipases and the impact on ice cream properties.

We investigated the possibility to use rapeseed as a main oil in ice cream formulations by changing its functionality when using different kinds of lipases. Through a 24 h-emulsification and a centrifugation, the modified oils were further used as functional ingredients. All lipolysis was first assessed as a function of time by 13C NMR, where triglycerides consumption and the formation of low-molecular polar lipids (LMPL: monoacylglycerol and free fatty acids, FFAs) were selectively identified and compared. The more the FFAs, the sooner the crystallization (from -55 to -10 °C) and the later the melting temperatures (from -17 to 6 °C) measured by differential scanning calorimetry. These modifications were exploited in ice cream formulations with a significant impact on overall hardness (range of 60-216 N) and flowing during defrosting (from 1.29 to 0.35g/min). The global behavior of products can be controlled by the composition of LMPL within oil.

Effects of a Functional Ice Cream Enriched with Milk Proteins on Bone Metabolism: A Feasibility Clinical Study and In Vitro Investigation.

Background: Milk proteins (MPs) and their derivative whey proteins (WPs) are important components of human diet that might prevent bone loss. We aimed to investigate the effects of MP on the bones of postmenopausal women, along with the effects of WP on osteoblast cells. Methods: We conducted a feasibility controlled clinical study with 62 postmenopausal women who were asked to consume an MP-enriched ice cream. We also investigated the effect of WP on the ERK1/2 and AKT pathways, RUNX2, alkaline phosphatase, RANKL/OPG ratio, and COL1A of Saos-2. Results: After 12 weeks, we found a greater bone mineral density and bone alkaline phosphatase reduction in women who consumed the MP-enriched ice cream compared to the control group (p = 0.03 and p = 0.02, respectively). In Saos-2 cells, WP upregulated ERK1/2 and AKT pathways (p = 0.002 and p = 0.016), cell proliferation (p = 0.03), and osteoblast differentiation markers, along with downregulating RANKL/OPG (p < 0.001). Moreover, the inhibition of ERK1/2 by PD184253 reverted the effects on both the RUNX2 and ALP mRNA expression and cells proliferation (p = 0.028, p = 0.004, and p = 0.003, respectively) when treated with WP. Conclusions: WP upregulates cell proliferation, RUNX2, and alkaline phosphatase through the activation of the ERK1/2 pathways on Saos-2. These mechanisms probably contribute to preventing bone loss in postmenopausal women.