Effects of health educational and participatory consumer group interventions in improving food handling practices in regional director of health services area Kalutara, Sri Lanka: non-randomized controlled community trial.

INTRODUCTION: Safe and nutritious food is the key to sustaining life and promoting good health. Unsafe food creates a vicious cycle of disease and malnutrition, particularly affecting infants, young children, the elderly, and the sick. METHODS: The study consisted of two phases, a descriptive cross-sectional study, and an intervention study. Both studies were conducted in the Regional Director of Health Services area, Kalutara, Sri Lanka. The descriptive cross-sectional study [food handlers (n = 904), food establishments (n = 421)] was conducted with the objective of determining factors associated with food handling practices among food handlers and in food establishments. The interventional study was a three-arm non-randomized controlled community trial (n = 50 per arm) with interventions of a participatory consumer group, educational package group, and control group. RESULTS: The food establishments assessment tool (FEAT) contained 11 domains including 75 items with more than a hundred assessment points with a guide to conduct an assessment of food handling. The descriptive cross-sectional study found that food handlers' knowledge of food handling practices of storing milk, fish, and meat and fast-food items containing fish and meat was very poor (96.6%). Visibility of the last place of processing inside the food establishments to consumers was inadequate (19.2%) and the absence of the above-mentioned factor was significantly associated with an unsatisfactory level of food handling score in food establishments (p = 0.03). The unsatisfactory level of food handling was significantly higher among food establishments with non-personal ownership (p = 0.005), a low number of notices issued by legal authorities (p = 0.02), dereliction of duty by owners/managers on supervising (p < 0.001) and lack of medical certification to food handlers (p < 0.0001). Participatory consumer group intervention and educational package interventions were effective in improving food handling practices in food establishments and among food handlers (p < 0.0001). Two independent sample analysis using the Mann-Whitney U test showed, the best improvement in food handling practices was by participatory consumer group intervention (p < 0.0001) and the second was educational package intervention (p < 0.0001). CONCLUSIONS: Knowledge and practices of food handling among participants were poor. A participatory consumer group is more effective than an educational package on improving food handling practices both among food handlers and in food establishments.

Insect Antimicrobial Peptides as Guardians of Immunity and Beyond: A Review.

Antimicrobial peptides (AMPs), as immune effectors synthesized by a variety of organisms, not only constitute a robust defense mechanism against a broad spectrum of pathogens in the host but also show promising applications as effective antimicrobial agents. Notably, insects are significant reservoirs of natural AMPs. However, the complex array of variations in types, quantities, antimicrobial activities, and production pathways of AMPs, as well as evolution of AMPs across insect species, presents a significant challenge for immunity system understanding and AMP applications. This review covers insect AMP discoveries, classification, common properties, and mechanisms of action. Additionally, the types, quantities, and activities of immune-related AMPs in each model insect are also summarized. We conducted the first comprehensive investigation into the diversity, distribution, and evolution of 20 types of AMPs in model insects, employing phylogenetic analysis to describe their evolutionary relationships and shed light on conserved and distinctive AMP families. Furthermore, we summarize the regulatory pathways of AMP production through classical signaling pathways and additional pathways associated with Nitric Oxide, insulin-like signaling, and hormones. This review advances our understanding of AMPs as guardians in insect immunity systems and unlocks a gateway to insect AMP resources, facilitating the use of AMPs to address food safety concerns.

The Conflict between Regulatory Agencies over the 20,000-Fold Lowering of the Tolerable Daily Intake (TDI) for Bisphenol A (BPA) by the European Food Safety Authority (EFSA).

BACKGROUND: The European Food Safety Authority (EFSA) recommended lowering their estimated tolerable daily intake (TDI) for bisphenol A (BPA) 20,000-fold to 0.2 ng/kg body weight (BW)/day. BPA is an extensively studied high production volume endocrine disrupting chemical (EDC) associated with a vast array of diseases. Prior risk assessments of BPA by EFSA as well as the US Food and Drug Administration (FDA) have relied on industry-funded studies conducted under good laboratory practice protocols (GLP) requiring guideline end points and detailed record keeping, while also claiming to examine (but rejecting) thousands of published findings by academic scientists. Guideline protocols initially formalized in the mid-twentieth century are still used by many regulatory agencies. EFSA used a 21st century approach in its reassessment of BPA and conducted a transparent, but time-limited, systematic review that included both guideline and academic research. The German Federal Institute for Risk Assessment (BfR) opposed EFSA's revision of the TDI for BPA. OBJECTIVES: We identify the flaws in the assumptions that the German BfR, as well as the FDA, have used to justify maintaining the TDI for BPA at levels above what a vast amount of academic research shows to cause harm. We argue that regulatory agencies need to incorporate 21st century science into chemical hazard identifications using the CLARITY-BPA (Consortium Linking Academic and Regulatory Insights on BPA Toxicity) nonguideline academic studies in a collaborative government-academic program model. DISCUSSION: We strongly endorse EFSA's revised TDI for BPA and support the European Commission's (EC) apparent acceptance of this updated BPA risk assessment. We discuss challenges to current chemical risk assessment assumptions about EDCs that need to be addressed by regulatory agencies to, in our opinion, become truly protective of public health. Addressing these challenges will hopefully result in BPA, and eventually other structurally similar bisphenols (called regrettable substitutions) for which there are known adverse effects, being eliminated from all food-related and many other uses in the EU and elsewhere. https://doi.org/10.1289/EHP13812.

Mircrofabricating double-sided polydimethylsiloxane (PDMS) artificial phylloplane for microbial food safety research.

Leafy green surface microbiology studies often experience significant variations in results due to the heterogeneous nature of leaf surfaces. To provide a precise and controllable substitute, we microfabricated double-sided artificial leafy green phylloplanes using polydimethylsiloxane (PDMS) with a vinyl-terminated polyethylene glycol chain-based hydrophobicity modifier (PDMS-PEG) to modify PDMS hydrophobicity. We further tested the properties and applications of these artificial leaves, by examining the function of epicuticular wax, growth and survival of E. coli O157:H7 87-23 on the surface, and removal of attached E. coli cells via sanitation. The double-sided PDMS-PDMS-PEG leaves well-replicated their natural counterparts in macroscopic and microscopic structure, hydrophobicity, and E. coli O157:H7 87-23 attachment. After depositing natural epicuticular wax onto artificial leaves, the leaf surface wetting ability decreased, while E. coli O157:H7 87-23 surface retention increased. The artificial leaves supplied with lettuce lysate or bacterial growth media supported E. coli O157:H7 87-23 growth and survival similarly to those on natural leaves. In the sanitation test, the artificial lettuce leaves also displayed patterns similar to those of natural leaves regarding sanitizer efficiency. Overall, this study showcased the microfabrication and applications of double-sided PDMS-PDMS-PEG leaves as a replicable and controllable platform for future leafy green food safety studies.

Food safety knowledge and practices among raw meat handlers and the microbial content of raw meat sold at Kumasi Abattoir Butchery Shops in Kumasi, Ghana.

BACKGROUND: Foodborne diseases affect nearly 600 million people each year, that is, one in every ten people, and their outbreaks are most common in low- and middle-income countries, particularly in Africa. This study investigated the food safety practices among raw meat handlers and the microbial quality of the meat from the butchery shops in Kumasi Abattoir, Ghana. METHODS: This study employed a descriptive cross-sectional study and collected quantitative data on factors associated with food safety and hygienic practices among raw meat handlers and the microbial quality of the raw meat using a structured questionnaire and standard laboratory methods, respectively. The study used all 50 beef vending shops in the butchery for questionnaire aspect and fresh beef samples were obtained from 10 vendors in the butchery shop. Appropriate methods were followed to analyse questionnaire data and meat samples. RESULTS: Most of the butchers (72%) were between the ages of 31 and 45, and they were predominantly Muslims (68%). Most of the respondents (48%) had basic education. All the respondents had food safety certificates from the local authority but needed adequate knowledge of meat safety. Most respondents (90%) handled meat and money with the same bare hands, thus contaminating the meat. The study showed that the maximum Total Viable Count (TVC), Total Staphylococcus Count (TSC), and Total Escherichia coli Count (TEC) were 5.60, 4.39 and 5.13 cfu/g, respectively. The study also revealed that all the meat samples were Salmonella species-free. CONCLUSIONS: Microorganisms in raw beef indicate a public health hazard. It gives a signal of a possible occurrence of food-borne intoxication and infection if not controlled. Environmental health officers in the Greater Kumasi area should organize food safety training and educate raw meat handlers on the importance of food safety and its consequences.

Quali sono la conoscenza, l'attitudine e la percezione dei rischi alimentari nei giovani adulti? Un'indagine effettuata in Italia.

BACKGROUND: in recent years, food safety has become increasingly important and a public health priority, especially in developed and rich countries. OBJECTIVES: to investigate knowledge and perception of food risk among young adults and the related behaviours. DESIGN: observational study conducted from March to October 2022 through the administration of an anonymous questionnaire based on multiple-choice questions spread online through social networks. SETTING AND PARTICIPANTS: 317 men and women with a mean age of 23.6 ± 6.7 (71% F, 29% M), mainly students, who filled the questionnaire and gave their consent to the use of personal data for the purpose of scientific research. MAIN OUTCOMES MEASURES: knowledge, attitudes, and perception of food risk in the target population. RESULTS: the majority think that food safety is very important to their health. The most perceived food risks are the presence of pesticides, bacterial and viral contamination, residuals of antibiotics and/or hormones, and microplastics. More than half believes to be poorly informed about the risk associated with food consumption. There is a high level of trust in data from scientific evidence and physicians and a low level of trust in data from European institutions and the Italian government. Almost everyone thinks that public authorities should provide more information. CONCLUSIONS: these data show a good knowledge of the importance of food safety for health; nevertheless, the majority does not feel well informed. The evaluation of the risk perception and of the factors influencing it is important for the success of the information/communication about food safety and for the consumer empowerment.

Targeted Detoxification of Aflatoxin B1 in Edible Oil by an Enzyme-Metal Nanoreactor.

Mycotoxin contamination is an important issue for food safety and the environment. Removing mycotoxins from food without losing nutrients and flavor components remains a challenge. In this study, a novel strategy was proposed for the targeted removal of aflatoxin B1 (AFB1) from peanut oil using an amphipathic enzyme-metal hybrid nanoreactor (PL-GOx-Fe3O4@COF) constructed with covalent organic frameworks (COFs) which can selectively adsorb AFB1. Due to the confined space provided by COFs and the proximity effect between GOx and Fe3O4, the detoxification of AFB1 is limited in the nanoreactor without affecting the composition and properties of the oil. The detoxification efficiency of AFB1 in the chemoenzymatic cascade reaction catalyzed by PL-GOx-Fe3O4@COF is six times higher than that of the combination of free GOx and Fe3O4. The AFB1 transformation product has nontoxicity to kidney and liver cells. This study provides a powerful tool for the targeted removal of mycotoxins from edible oils.

From field to table: Ensuring food safety by reducing pesticide residues in food.

The present review addresses the significance of lowering pesticide residue levels in food items because of their harmful impacts on human health, wildlife populations, and the environment. It draws attention to the possible health risks-acute and chronic poisoning, cancer, unfavorable effects on reproduction, and harm to the brain or immunological systems-that come with pesticide exposure. Numerous traditional and cutting-edge methods, such as washing, blanching, peeling, thermal treatments, alkaline electrolyzed water washing, cold plasma, ultrasonic cleaning, ozone treatment, and enzymatic treatment, have been proposed to reduce pesticide residues in food products. It highlights the necessity of a paradigm change in crop protection and agri-food production on a global scale. It offers opportunities to guarantee food safety through the mitigation of pesticide residues in food. The review concludes that the first step in reducing worries about the negative effects of pesticides is to implement regulatory measures to regulate their use. In order to lower the exposure to dietary pesticides, the present review also emphasizes the significance of precision agricultural practices and integrated pest management techniques. The advanced approaches covered in this review present viable options along with traditional methods and possess the potential to lower pesticide residues in food items without sacrificing quality. It can be concluded from the present review that a paradigm shift towards sustainable agriculture and food production is essential to minimize pesticide residues in food, safeguarding human health, wildlife populations, and the environment. Furthermore, there is a need to refine the conventional methods of pesticide removal from food items along with the development of modern techniques.

[Implementation and Evaluation of Risk Communication Regarding Residual Pesticides].

In this study, a public seminar on risk communication methods was conducted to raise awareness and disseminate accurate knowledge about residual pesticides to consumers. Additionally, surveys on consumer awareness were conducted on the attendees before and after the seminar to evaluate its effectiveness. Responses were obtained from 84 participants. The paired t-test was used to analyze the changes in awareness before and after the seminar. The results showed significant improvements in "trust in the government" and "understanding of residual pesticides." Furthermore, step-wise multiple regression analysis was performed to explore the factors influencing satisfaction with the risk communication seminar, and the item "understanding of the safety of residual pesticides in food" was extracted. Understanding food safety is a crucial concern in daily life for consumers. To enable consumers to have an accurate understanding of food risks and make appropriate judgments, it is essential to continue implementing risk communication and conveying information about food safety and security in the future.

Unveiling per- and polyfluoroalkyl substance contamination in Chinese paper products and assessing their exposure risk.

The contamination characteristics, migration patterns and health risks of per- and polyfluoroalkyl substances (PFAS) were investigated in 66 Chinese paper products by using target and non-target screening methods. Among 57 target PFASs, 5 and 6 PFASs were found in the hygiene paper products (

Factors influencing the fate of chemical food safety hazards in the terrestrial circular primary food production system-A comprehensive review.

Food safety is recognized as a major hurdle in the transition toward circular food production systems due to the potential reintroduction and accumulation of chemical contaminants in these food systems. Effectively managing these hazardous contaminants in a risk-based manner requires quantitative insights into the factors influencing the presence and fate of contaminants in the entire circular food chain. A systematic literature review was performed to gain an up-to-date overview of the known factors and their influence on the transfer and accumulation of contaminants. This review focused on the terrestrial circular primary food production system, including the pathways between waste- or byproduct-based fertilizers, soil, crops, animal feed, and farmed animals. This review revealed an imbalance in research regarding the different pathways: studies on the soil-to-crop pathway were most abundant. The factors identified can be categorized as compound-related (intrinsic) factors, such as hydrophobicity, molecular weight, and chain length, and extrinsic factors, such as soil organic matter and carbon, pH, milk yield of cows, crop age, and biomass. Quantitative data on the influence of the identified factors were limited. Most studies quantified the influence of individual factors, whereas only a few studies quantified the combined effect of multiple factors. By providing a holistic insight into the influential factors and the quantification of their influence on the fate of contaminants, this review contributes to the improvement of food safety management for chemical hazards when transitioning to a circular food system.

Recent advances in metal oxide nanozyme-based optical biosensors for food safety assays.

Metal oxide nanozymes are emerging as promising materials for food safety detection, offering several advantages over natural enzymes, including superior stability, cost-effectiveness, large-scale production capability, customisable functionality, design options, and ease of modification. Optical biosensors based on metal oxide nanozymes have significantly accelerated the advancement of analytical research, facilitating the rapid, effortless, efficient, and precise detection and characterisation of contaminants in food. However, few reviews have focused on the application of optical biosensors based on metal oxide nanozymes for food safety detection. In this review, the catalytic mechanisms of the catalase, oxidase, peroxidase, and superoxide dismutase activities of metal oxide nanozymes are characterized. Research developments in optical biosensors based on metal oxide nanozymes, including colorimetric, fluorescent, chemiluminescent, and surface-enhanced Raman scattering biosensors, are comprehensively summarized. The application of metal oxide nanozyme-based biosensors for the detection of nitrites, sulphites, metal ions, pesticides, antibiotics, antioxidants, foodborne pathogens, toxins, and other food contaminants has been highlighted. Furthermore, the challenges and future development prospects of metal oxide nanozymes for sensing applications are discussed. This review offers insights and inspiration for further investigations on optical biosensors based on metal oxide nanozymes for food safety detection.

Persistent organic pollutants and heavy metals in Ghanaian environment: a systematic review of food safety implications.

Advances in industrial and technological innovations have led to significant socio-economic benefits, but with overwhelming negative impacts on the environment. These impacts include the infiltration of organic contaminants into soil, water, and air, posing a threat to the environment and public health. Polybrominated diphenyl ethers (PBDEs), heavy metals, and polycyclic aromatic hydrocarbons (PAHs) are increasingly released as waste, endangering the environment. In countries like Ghana, where regulations are weakly enforced, industrial waste is released uncontrollably, posing threats to public health, environmental integrity, and food systems. This study systematically evaluated existing literature on PBDEs, heavy metals, PAHs, and organic contaminant exposure in Ghana and proposes a roadmap for achieving food safety and protecting the environment and human health. The research identified high mobility of specific heavy metals and risks associated with PBDEs and PAHs in sediments, dumpsites, and various food items. Unregulated dumping of electronic waste with PBDEs raised environmental concerns. An integrated approach is needed to address the multifaceted impact of organic pollutants on public health and ecosystems. Urgent implementation of effective environmental management strategies and regulatory measures is crucial. The study proposed short- to mid-term priorities emphasising the need to foster collaboration and implementing global measures. The mid- to long-term strategy includes a national information surveillance system, local monitoring capacity development, and integrating land contamination controls with food safety legislation. These measures would mitigate risks, ensure sustainable practices, and improve overall food safety management in Ghana, serving as a model for regions facing similar challenges with diverse pollutants.

[Key challenges in the dietary intake structure and cutting edge technologies for optimizing nutrition to protect the health of the Russian рopulation].

This article presents an analysis of some of the results of the work of the Federal Research Center for Nutrition and Biotechnology (Center) in recent years, highlighting the most important, promising areas of Nutrition Science and Food Hygiene that need further development. The priority area of Center functioning is scientific support for the implementation of the Doctrine of Food Security of the Russian Federation (Decree of the President of the Russian Federation dated January 21, 2020 No. 20), Decree of the President of the Russian Federation dated July 21, 2020 No. 474 «On the national development goals of the Russian Federation for the period until 2030 «in terms of ensuring an increase in life expectancy and improving the life quality of the population, the Strategy for Improving the Quality of Food Products in the Russian Federation until 2030 (Order of the Government of the Russian Federation dated June 29, 2016 No. 1364-r). The Center coordinates all research on medical nutrition problems in the Russian Federation within the framework of the work of the Problem Commission on Nutrition Hygiene of the Scientific Council of the Federal Service for Supervision of Consumer Rights Protection and Human Welfare, the Scientific Council of the Russian Academy of Sciences on Medical Nutrition Problems, the Scientific and Technical Committee of the Comprehensive Scientific Program «Priority Research in the Field of Nutrition of the Population¼, Profile Commission on Dietetics of the Expert Council in the Field of Health of the Ministry of Healthcare of Russian Federation, ensuring the implementation of their results with the participation of members of the Consortium "Healthcare, Nutrition, Demography". The most important area of the Center's work is scientific and expert support in the field of international and national technical regulation of the production and turnover of foods and raw materials, in particular, the work of the Russian national contact point of the Codex Alimentarius Commission (established by FAO and WHO), as well as the work of the Russian side in the Eurasian Economic Commission regarding the preparation of proposals for technical regulations of the Customs Union in the field of food safety, evaluation of draft technical regulations and amendments and additions to them.

A snail species identification method based on deep learning in food safety.

In daily life, snail classification is an important mean to ensure food safety and prevent the occurrence of situations that toxic snails are mistakenly consumed. However, the current methods for snail classification are mostly based on manual labor, which is inefficient. Therefore, a snail detection and classification method based on improved YOLOv7 was proposed in this paper. First, in order to reduce the FLOPs of the model, the backbone of the original model was improved. Specifically, the original 3×3 regular convolution was replaced with 3×3 partial convolution, and the Conv2D_BN_SiLU module in the partial convolution was replaced with the Conv2D_BN_FReLU module. FReLU could enhance the model's representational capacity without increasing the number of parameters. Then, based on the specific features of snail images, in order to solve the problems of small and dense targets of diverse shapes, a receptive field enhancement module was added to the head to learn the different receptive fields of the feature maps and enhance the feature pyramid representation. In addition, the CIoU was replaced with the WIoU to make the model pay more attention to targets at the edge or difficult-to-regress accurate bounding boxes. Finally, the images of nine common types of snails were collected, including the Pomacea canaliculata, the Viviparidae, the Nassariidae, and so on. These images were then labeled using LabelImg software to create a snail image dataset. Experiments were conducted based on the dataset, and the results showed that the proposed method demonstrated the best performance compared to other state-of-the-art methods.

Recent advances in molecularly imprinted polymers (MIPs) for visual recognition and inhibition of α-dicarbonyl compound-mediated Maillard reaction products.

α-Dicarbonyl compounds (α-DCs) are important intermediates and precursors of harmful Maillard reaction products (e.g., acrylamide and late glycosylation end-products), and they exist widely in thermoprocessed sugar- or fat-rich foods. α-DCs and their end-products are prone to accumulation in the human body and lead to the development of various chronic diseases. Therefore, detection of α-DCs and their associated hazards in food samples is crucial. This paper reviews the preparation of molecularly imprinted polymers (MIPs) enabling visual intelligent responses and the strategies for recognition and capture of α-DCs and their associated hazards, and provides a comprehensive summary of the development of visual MIPs, including integration strategies and applications with real food samples. The visual signal responses as well as the mechanisms for hazard recognition and capture are highlighted. Current challenges and prospects for visual MIPs with advanced applications in food, agricultural and environmental samples are also discussed. This review will open new horizons regarding visual MIPs for recognition and inhibition of hazards in food safety.

Advanced detection tools in food fraud: A systematic review for holistic and rational detection method based on research and patents.

Modern food chain supply management necessitates the dire need for mitigating food fraud and adulterations. This holistic review addresses different advanced detection technologies coupled with chemometrics to identify various types of adulterated foods. The data on research, patent and systematic review analyses (2018-2023) revealed both destructive and non-destructive methods to demarcate a rational approach for food fraud detection in various countries. These intricate hygiene standards and AI-based technology are also summarized for further prospective research. Chemometrics or AI-based techniques for extensive food fraud detection are demanded. A systematic assessment reveals that various methods to detect food fraud involving multiple substances need to be simple, expeditious, precise, cost-effective, eco-friendly and non-intrusive. The scrutiny resulted in 39 relevant experimental data sets answering key questions. However, additional research is necessitated for an affirmative conclusion in food fraud detection system with modern AI and machine learning approaches.

Microplastics in retail shellfish from a seafood market in eastern Thailand: Occurrence and risks to human food safety.

This study aimed to investigate the presence of microplastics in three economically essential shellfish species: green mussels, cockles and spotted babylon. The average abundance of microplastics ranged from 2.41 to 2.84 particles/g wet weight. The predominant shape was fiber, with colors ranging from black-grey to transparent. The size of the microplastics discovered was <1.0 mm. Polystyrene and polyethylene were the most detected types in mussels and cockles, while linen was the predominant type in spotted babylon. The Thai population's estimated annual intake (EAI) of microplastics through shellfish consumption ranged from 20.23 to 1178.42 particles/person/year. The potential human health risks were evaluated using the polymer hazard index (PHI), which led to risk categories III-IV. These findings, along with others from the literature, indicate that shellfish consumption may pose risks to human health, depending on the species consumed and the origin of the specimens.

Recent advances in edible insect processing technologies.

Alternative foods have emerged as one of the hot research topics aiming at alleviating food shortage. Insects are one of the alternative foods due to their rich nutrients. Processing is a critical step to develop insect foods, while there is a lack of comprehensive reviews to summarize the main studies. This review aims to demonstrate different processing methods in terms of their impact on insect nutrition and their potential risks. Heat treatments such as boiling and blanching show a negative effect on insect nutrition, but essential to assure food safety. Insects treated by high-pressure hydrostatic technology (HPP) and cold atmospheric pressure plasma (CAPP) can achieve a similar sterilization effect but retain the nutritional and sensory properties. Drying is a practical processing method for industrial insect production, where oven drying serves as a cost-effective method yielding products comparable in quality to freeze-dried ones. In terms of extraction technology, supercritical carbon dioxide and ultrasound-assisted technology can improve the extraction efficiency of proteins and lipids from insects, enhance the production of composite insect-fortified foods, and thus facilitate the development of the insect food industry. To address the widespread negative perceptions and low acceptance towards insect foods among consumers, the primary development direction of the insect food industry may involve creating composite fortified foods and extracting insect-based food components.