Does an alternative breast support garment provide symptomatic relief for larger breasted women with chronic non-specific back pain?

BACKGROUND: Nonsurgical guidelines recommend implementing a correctly fitted bra when managing back pain among larger breasted women. Achieving this is challenging with current bra solutions, sizing principles, and fitting approaches. Persistent wearing of an ill-fitting bra can cause negative health implications, including non-specific back pain. OBJECTIVES: This study investigated immediate and short-term biomechanical and pain responses to changing breast support garment among larger breasted women with non-specific back pain. METHODS: Participants (n = 24) performed a standing task, drop jumps, and seated typing tasks while bra and spinal kinematic data were recorded. Five breast support conditions were assessed: participants' usual bra (control), a professionally fitted bra in the immediate term (standard) and after 4 weeks wear (standard28), and a bra with an alternative design, measurement, and fitting approach in both the immediate term (alternative) and after 4 weeks wear (alternative28). A bra fit assessment and clinical pain/disability questionnaires were included. RESULTS: All participants failed the bra fit assessment in the control bra, compared with 87.5% (n = 21) in the standard and 4.2% (n = 1) in the alternative bras. The standard28 and alternative28 bras provided symptomatic relief, with the alternative28 bra improving a greater number of outcome measures. Reduced nipple-sternal-notch distance was observed only in the alternative28 bra condition. CONCLUSIONS: Symptomatic relief may be associated with the resting position of the breast tissue on the anterior chest wall. The alternative bra may provide potential clinical benefit if implemented as part of a nonsurgical or conservative pain management strategy. Alternative breast support garments should be considered to provide solutions to the problems associated with traditional bras.

Implementation difficulties and solutions for a smart-clothes assisted home nursing care program for older adults with dementia or recovering from hip fracture.

BACKGROUND: Wearable devices have the advantage of always being with individuals, enabling easy detection of their movements. Smart clothing can provide feedback to family caregivers of older adults with disabilities who require in-home care. METHODS: This study describes the process of setting up a smart technology-assisted (STA) home-nursing care program, the difficulties encountered, and strategies applied to improve the program. The STA program utilized a smart-vest, designed specifically for older persons with dementia or recovering from hip-fracture surgery. The smart-vest facilitated nurses' and family caregivers' detection of a care receiver's movements via a remote-monitoring system. Movements included getting up at night, time spent in the bathroom, duration of daytime immobility, leaving the house, and daily activity. Twelve caregivers of older adults and their care receiver participated; care receivers included persons recovering from hip fracture (n = 5) and persons living with dementia (n = 7). Data about installation of the individual STA in-home systems, monitoring, and technical difficulties encountered were obtained from researchers' reports. Qualitative data about the caregivers' and care receivers' use of the system were obtained from homecare nurses' reports, which were explored with thematic analysis. RESULTS: Compiled reports from the research team identified three areas of difficulty with the system: incompatibility with the home environment, which caused extra hours of manpower and added to the cost of set-up and maintenance; interruptions in data transmissions, due to system malfunctions; and inaccuracies in data transmissions, due to sensors on the smart-vest. These difficulties contributed to frustration experienced by caregivers and care receivers. CONCLUSIONS: The difficulties encountered impeded implementation of the STA home nursing care. Each of these difficulties had their own unique problems and strategies to resolve them. Our findings can provide a reference for future implementation of similar smart-home systems, which could facilitate ease-of-use for family caregivers.

A new sports garment with elastomeric technology optimizes physiological, mechanical, and psychological acute responses to pushing upper-limb resistance exercises.

This study aimed to compare the mechanical (lifting velocity and maximum number of repetitions), physiological (muscular activation, lactate, heart rate, and blood pressure), and psychological (rating of perceived exertion) responses to upper-body pushing exercises performed wearing a sports elastomeric garment or a placebo garment. Nineteen physically active young adults randomly completed two training sessions that differed only in the sports garment used (elastomeric technology or placebo). In each session, subjects performed one set of seated shoulder presses and another set of push-ups until muscular failure. The dependent variables were measured immediately after finishing the set of each exercise. Compared to the placebo garment, the elastomeric garment allowed participants to obtain greater muscular activation in the pectoralis major (push-ups: p = 0.04, d = 0.49; seated shoulder press: p < 0.01, d = 0.64), triceps brachialis (push-ups, p < 0.01, d = 0.77; seated shoulder press: p < 0.01, d = 0.65), and anterior deltoid (push-ups: p < 0.01, d = 0.72; seated shoulder press: p < 0.01, d = 0.83) muscles. Similarly, participants performed more repetitions (push-ups: p < 0.01; d = 0.94; seated shoulder press: p = 0.03, d = 0.23), with higher movement velocity (all p ≤ 0.04, all d ≥ 0.47), and lower perceived exertion in the first repetition (push-ups: p < 0.01, d = 0.61; seated shoulder press: p = 0.05; d = 0.76) wearing the elastomeric garment compared to placebo. There were no between-garment differences in most cardiovascular variables (all p ≥ 0.10). Higher diastolic blood pressure was only found after the seated shoulder press wearing the elastomeric garment compared to the placebo (p = 0.04; d = 0.49). Finally, significantly lower blood lactate levels were achieved in the push-ups performed wearing the elastomeric garment (p < 0.01; d = 0.91), but no significant differences were observed in the seated shoulder press (p = 0.08). Overall, the findings of this study suggest that elastomeric technology integrated into a sports garment provides an ergogenic effect on mechanical, physiological, and psychological variables during the execution of pushing upper-limb resistance exercises.

Numerical model of pressure generated by elastic compression garments on a compressible human limb analogue.

OBJECTIVE: This study aimed to formulate a numerical approach (finite element modelling (FEM)) to calculate pressure values generated by compression garments on a compressible limb analogue, and to validate the numerical approach using experimental measurements. Existing models were also compared. METHOD: Experimentally measured pressure values and deformation caused by compression bands on a compressible human limb analogue were compared with values predicted using the Young-Laplace equation, a previously formulated analytical model and the FEM. RESULTS: The FEM provided greater accuracy in predicting the pressure generated by compression bands compared to existing models. The FEM also predicted deformation of the limb analogue with good agreement relative to experimental values. CONCLUSION: It was concluded that modelling the non-uniform manner in which the way a limb analogue is compressed should be incorporated into future modelling of the pressures generated by compression garments on a compressible limb analogue. DECLARATION OF INTEREST: The authors have no conflicts of interest to declare.

Transferability of Human and Environmental Microbiome on Clothes as a Tool for Forensic Investigations.

Considering the growing importance of microbiome analyses in forensics for identifying individuals, this study explores the transfer of the skin microbiome onto clothing, its persistence on fabrics over time, and its transferability from the environment and between different garments. Furthermore, this project compares three specific QIAGEN microbiome extraction kits to test their extraction efficiency on fabric samples. Additionally, this study aims to check if these extracts contain human DNA, providing a chance to obtain more information from the same evidence for personal identification. The results obtained show: (1) variations in the skin microbiome between the volunteers, potentially due to their different sex; (2) differences in microbial composition between worn and unworn clothing; (3) the influence of the environment on the microbial signature of unworn clothing; (4) the potential use of certain phyla as biomarkers to differentiate between worn and unworn garments, even over extended periods; (5) a tendency towards extraction biases in the QIAampMP® DNA microbiome kit among the three tested ones; and (6) none of the extraction kits allow for the typing of human genetic profiles suitable for comparison. In conclusion, our study offers supplementary insights into the potential utility of time-transferred microbiome analysis on garments for forensic applications.

Design guidelines for movement-assistive clothing based on a comprehensive understanding of older adults' needs and preferences.

This study aimed to explore the needs and wants of older adults in the context of movement-assistive clothing (MSC), with a focus on muscle strength and posture correction. A survey was conducted to understand the needs and wants of older adults, considering aspects of functions and designs, and to evaluate the comfort, safety, ease of use, usefulness, and intention of users to purchase and use products. A total of 408 individuals aged > 65 years participated in the study. The data were analyzed using descriptive analyses, such as mean, standard deviation, percentages, Cronbach's alpha, chi-square test, independent t-test, analysis of variance, and regression using IBM SPSS 27.0. Exploratory Factor Analysis was also conducted to test the hypotheses. Open-ended questions were extracted using major themes after color-coding. Based on the results, design recommendations were derived, including the development of pants and innerwear with casual, minimalist styles, featuring achromatic colors, and utilizing stretchy, breathable fabrics. Comfort, safety, ease of use, and usefulness emerged as critical factors influencing the purchase and use of MSC by older adults. This study aimed to establish design guidelines by understanding the needs and wants of older adults and considering the aspects of movement-assistive clothing to relieve musculoskeletal issues. Accordingly, these findings are expected to aid in the creation of wearable suits using flexible fabric artificial muscles for active musculoskeletal correction in older adults.

Clothing Textiles as Carriers of Biological Ice Nucleation Active Particles.

Microplastics have littered the globe, with synthetic fibers being the largest source of atmospheric microplastics. Many atmospheric particles can act as ice nucleators, thereby affecting the microphysical and radiative properties of clouds and, hence, the radiative balance of the Earth. The present study focused on the ice-nucleating ability of fibers from clothing textiles (CTs), which are commonly shed from the normal wear of apparel items. Results from immersion ice nucleation experiments showed that CTs were effective ice nucleators active from -6 to -12 °C, similar to common biological ice nucleators. However, subsequent lysozyme and hydrogen peroxide digestion stripped the ice nucleation properties of CTs, indicating that ice nucleation was biological in origin. Microscopy confirmed the presence of biofilms (i.e., microbial cells attached to a surface and enclosed in an extracellular polysaccharide matrix) on CTs. If present in sufficient quantities in the atmosphere, biological particles (biofilms) attached to fibrous materials could contribute significantly to atmospheric ice nucleation.

Stolen Horses and Scented Garments: Vegetal and Mineral Yellow in Arabic Technical Literature.

Mediaeval Arabic technical literature shows a keen interest in yellow dyes, paints, varnishes, inks, and even perfumes. Recipes reveal that yellow was viewed as just one step away from gold, with preparations for these two colours often sharing ingredients and techniques. In the unfolding of procedures and applications to different materials, from skin to textiles, Arabic sources also offer a glimpse into daily life and shared tastes, presenting luxury objects along with their imitations. This paper traces the role played by yellow and gold in inks, cosmetic dyes, and coloured, scented fabrics, exploring the textual dimension of these recipes, their technical features, and their social role between the court and the street. It also presents translations of several important recipes for yellow and gold dyes, which illustrate their diversity of applications, while also addressing such material problems as durability and substitution.

Biodegradable and flame-retardant cellulose-based wearable triboelectric nanogenerator for mechanical energy harvesting in firefighting clothing.

Integrating flexible triboelectric nanogenerators (TENGs) into firefighting clothing offers exciting opportunities for wearable portable electronics in personal protective technology. However, it is still a grand challenge to produce eco-friendly TENGs from biodegradable and low-cost natural polymers for mechanical-energy harvesting and self-powered sensing. Herein, conductive polypyrrole (PPy) and natural chitosan (CS)/phytic acid (PA) tribonegative materials were employed onto the Lycra fabric (LC) in turn to assemble the biodegradable and flame-retardant single-electrode mode LC/PPy/CS/PA TENG (abbreviated as LPCP-TENG). The resultant LPCP-TENG exhibits truly wearable breathability (1378.6 mm/s), elasticity (breaking elongation 291 %), and shape adaptivity performance that can produce an open circuit voltage of 0.3 V with 2 N contact pressure at a working frequency of 5 Hz with a limiting oxygen index of 35.2 %. Furthermore, facile monitoring for human motion of firefighters on fireground is verified by LPCP-TENG when used as self-powered flexible tactile sensor. In addition, degradation experiments have shown that waste LPCP-TENG can be fully degraded in soil within 120 days. This work broadens the applicational range of wearable TENG to reduce the environmental effects of abandoned TENG, exhibiting prosperous applications prospects in the field of wearable power source and self-powered motion detection sensor for personal protection application on fireground.

Efficient Model-Based Anthropometry under Clothing Using Low-Cost Depth Sensors.

Measuring human body dimensions is critical for many engineering and product design domains. Nonetheless, acquiring body dimension data for populations using typical anthropometric methods poses challenges due to the time-consuming nature of manual methods. The measurement process for three-dimensional (3D) whole-body scanning can be much faster, but 3D scanning typically requires subjects to change into tight-fitting clothing, which increases time and cost and introduces privacy concerns. To address these and other issues in current anthropometry techniques, a measurement system was developed based on portable, low-cost depth cameras. Point-cloud data from the sensors are fit using a model-based method, Inscribed Fitting, which finds the most likely body shape in the statistical body shape space and providing accurate estimates of body characteristics. To evaluate the system, 144 young adults were measured manually and with two levels of military ensembles using the system. The results showed that the prediction accuracy for the clothed scans remained at a similar level to the accuracy for the minimally clad scans. This approach will enable rapid measurement of clothed populations with reduced time compared to manual and typical scan-based methods.

Effects of a full-body electrostimulation garment application in a cohort of subjects with cerebral palsy, multiple sclerosis, and stroke on upper motor neuron syndrome symptoms.

OBJECTIVES: Dysfunction of the central nervous system may inflict spastic movement disorder (SMD). Electrical stimuli were identified as promising therapeutic option. Electrical stimulation provided by a 58-electrode full body garment was investigated based on data from regular trial fittings. METHODS: Data from 72 testees were investigated. Age averages 36.6 (19.8) ys with 44 females. The cohort spans infantile cerebral paresis (CP) (n=29), multiple sclerosis (MS) (n=23) and stroke (n=20). Data were stratified by etiology and an entry BBS Score<45. RESULTS: Effect sizes (Cohen`s d) related BBS, TUG, FGA, 10mWT, WMFT, EQ5D5L and Pain. Significance levels are indicated by *: p<0.05, **: p<0.01, ***: p<0.001, (t): p<0.1: CP: 1.64***, 0.29*, 1.59***, 0.76(t), 1.00***, 0.5*, 1.28***; MS: 1.83***, 0.83***, 1.28**, 1.07***, 0.93*, 1,11**, 0.78*; Stroke: 1.28**, 0.78**, 0.89, 0.92**, 0.71, 1.26*, 0.78*. CONCLUSIONS: Multi-site transcutaneous electrical stimulation may increase ambulation related skills in subjects with SMD stemming from CP, MS and stroke. The results indicate effects on static and dynamic balance, fall risk, mobility, upper extremity improvement and an overall increase in health utility and a reduction in spasticity related pain. Effects are immediate as well as sustained. These results may inspire individual trial fittings and inform further controlled trials.

Thermoresponsive Skin-like Fabric for Personal Comfort and Protection.

Acting as a "second skin", clothing plays an indispensable role in providing comfort and protection in the wide range of environments in which we live. However, comfort and protection are often competing requirements and are difficult to improve simultaneously. By mimicking the exceptional thermoresponsive one-way liquid transport property of human skin, here we developed a scalable and ecofriendly skin-like fabric that has a tunable directional water transport rate while having excellent water repellency. The water transport rate is also temperature-responsive, just like skin. As the temperature increases, the wettability gradient in the spatially distributed channels (acting like "sweat glands") increases, promoting sweat transport and evaporative heat dissipation. As the temperature decreases, on the other hand, the wettability gradient diminishes, reducing liquid transport and evaporative heat loss, thereby promoting heat retention. The fabric is highly suitable for sportswear and functional clothing and can have wider applications, such as oil-water separation, fog harvesting, etc.

Innovative building materials by upcycling clothing waste into thermal energy storage matrix with phase change materials.

The current volume of clothing waste reached 115 million tons in 2021 and is projected to increase to approximately 150 million tons by 2030. This significant surge in clothing waste has prompted heightened discussions regarding environmentally friendly recycling methods. Clothing presents complex properties, posing substantial challenges to recycling and usually resulting in environmental pollution when disposed. In this study, our recycling approach capitalizes on the differing melting points of textiles. This transformation was achieved through a physical process that included an opening procedure and high temperature heat compression. Textile materials exhibit exceptional thermal properties. Through experimentation on 50 g fiber specimens, thermal conductivities similar to commercial insulation materials were observed, registering an average of 0.0592 W/m·K at 20 °C and 0.06053 W/m·K at 40 °C. This study explores the impregnation of phase change materials (PCMs) into clothing waste-based specimens, equipping them with heat storage capabilities. During the experimental phase, we employed three distinct types of PCMs to evaluate their thermal properties and heat storage capacities in relation to their respective melting temperatures. Through thermal properties analysis, we determined the latent heat capacity of each specimen, ranging from a minimum of 6.63 J/g to a maximum of 75.81 J/g. Our observations indicated a reduction in peak temperature and time-leg effects attributable to the use of PCMs for surface heat flow. This research underscores the superior thermal performance of construction and building materials derived from clothing waste, enhanced by the integration of PCMs, when compared to traditional materials and other waste-derived alternatives.

Effect of wet clothing removal on skin temperature in subjects exposed to cold and wrapped in a vapor barrier: a human, randomized, crossover field study.

BACKGROUND: Prehospital care for cold-stressed and hypothermic patients focuses on effective insulation and rewarming. When encountering patients wearing wet clothing, rescuers can either remove the wet clothing before isolating the patient or isolate the patient using a vapor barrier. Wet clothing removal increases skin exposure but avoids the need to heat the wet clothing during rewarming. Leaving wet clothing on will avoid skin exposure but is likely to increase heat loss during rewarming. This study aimed to evaluate the effect of wet clothing removal compared to containing the moisture using a vapor barrier on skin temperature in a prehospital setting. METHODS: This randomized crossover experimental field study was conducted in a snow cave in Hemsedal, Norway. After an initial cooling phase of 30 min while wearing wet clothes, the participants were subjected to one of two rewarming scenarios: (1) wet clothing removal and wrapping in a vapor barrier, insulating blankets, and windproof outer shell (dry group) or (2) wrapping in a vapor barrier, insulating blankets, and windproof outer shell (wet group). The mean skin temperature was the primary outcome whereas subjective scores for both thermal comfort and degree of shivering were secondary outcomes. Primary outcome data were analyzed using the analysis of covariance (ANCOVA). RESULTS: After an initial decrease in temperature during the exposure phase, the dry group had a higher mean skin temperature compared to the wet group after only 2 min. The skin-rewarming rate was highest in the initial rewarming stages for both groups, but increased in the dry group as compared to the wet group in the first 10 min. Return to baseline temperature occurred significantly faster in the dry group (mean 12.5 min [dry] vs. 28.1 min [wet]). No intergroup differences in the subjective thermal comfort or shivering were observed. CONCLUSION: Removal of wet clothing in combination with a vapor barrier increases skin rewarming rate compared to encasing the wet clothing in a vapor barrier, in mild cold and environments without wind. TRIAL REGISTRATION: ClinicalTrials.gov ID NCT05996757, retrospectively registered 18/08/2023.

"They had clothes on their back and they had food in their stomach, but they didn't have me": The contribution of parental mental health problems, substance use, and domestic violence and abuse on young people and parents.

BACKGROUND: The parental risk factors of mental health problems, substance use, and domestic violence and abuse each individually negatively impacts children's health and developmental outcomes. Few studies have considered the lived experience and support needs of parents and children in the real-world situation where these common risks cluster. OBJECTIVE: This study explores parents' and young people's lived experiences of the clustering of parental mental health problems, parental substance use, and domestic violence and abuse. METHODS: Semi-structured interviews were conducted with 18 mothers, 6 fathers, and 7 young people with experiences of these parental risk factors. Transcribed interviews were analysed using reflexive thematic analysis. RESULTS: Four themes were developed, 1) cumulative adversity, 2) the impact of syndemic risk, 3) families navigating risk, and 4) family support. Parents and young people described family situations of stress wherein they experienced cumulative impact of multiple parental risk factors. Parents sought to navigate stressors and parent in positive ways under challenging conditions, often impeded by their own childhood trauma and diminished confidence. Parents and young people spoke of the need for, and benefits of having, support; both as a family and as individuals, to successfully address this trio of parental risks and the related impact. CONCLUSIONS: This study highlights the high level of stress families experience and the efforts they go to mitigate risk. Services and interventions need to reflect the complexity of multiple needs and consider both the whole family and individuals when providing support.

Comparison of Concurrent and Asynchronous Running Kinematics and Kinetics From Marker-Based and Markerless Motion Capture Under Varying Clothing Conditions.

As markerless motion capture is increasingly used to measure 3-dimensional human pose, it is important to understand how markerless results can be interpreted alongside historical marker-based data and how they are impacted by clothing. We compared concurrent running kinematics and kinetics between marker-based and markerless motion capture, and between 2 markerless clothing conditions. Thirty adults ran on an instrumented treadmill wearing motion capture clothing while concurrent marker-based and markerless data were recorded, and ran a second time wearing athletic clothing (shorts and t-shirt) while markerless data were recorded. Differences calculated between the concurrent signals from both systems, and also between each participant's mean signals from both asynchronous clothing conditions were summarized across all participants using root mean square differences. Most kinematic and kinetic signals were visually consistent between systems and markerless clothing conditions. Between systems, joint center positions differed by 3 cm or less, sagittal plane joint angles differed by 5° or less, and frontal and transverse plane angles differed by 5° to 10°. Joint moments differed by 0.3 N·m/kg or less between systems. Differences were sensitive to segment coordinate system definitions, highlighting the effects of these definitions when comparing against historical data or other motion capture modalities.

Navigating Sustainability through Greenhouse Gas Emission Inventory: ESG Practices and Energy Shift in Bangladesh's Textile and Readymade Garment Industries.

As the world's demand for textiles and clothing rapidly increases, this industry's greenhouse gas (GHG) emissions are becoming a major environmental concern. Bangladesh, a key player in the global textile supply chain and one of the top producers, contributes significantly to these emissions. However, accessible data on activity and GHG emissions, crucial for researchers, the private sector, and policymakers in decision-making, is scarce. To address this gap, this study combines a detailed field survey with expert interviews to establish a comprehensive emission inventory. This inventory aims to identify hotspots and facilitate the adoption of effective mitigation strategies. Focusing on a prominent industrial zone's textile and readymade garments (RMG) industries, the research employs a mix of top-down and bottom-up approaches and follows the IPCC guidelines to develop a GHG emission inventory for 2022. The study evaluates various emission sources, including scope 1 (onsite fuel combustions), scope 2 (grid electricity usage), and scope 3 (waste and wastewater treatment). In the total emissions (6043.5 Gg CO2eq.), textile and RMG industries contribute 67.8% and 32.2%, respectively, with scope 1 emissions dominating at 85%. Notably, scope 2 emissions exhibit significant uncertainty (-10.4% to +11.9%), largely due to variations in national grid emission factors. This study forecasts GHG emissions until 2030, considering current trends (26 thousand Gg CO2 eq.). It also explores various energy mix scenarios, factoring in the depletion of existing natural gas reserves (ranging from 8 thousand to 33 thousand Gg CO2 eq.). This study delves into the impact of the Environmental, Social, and Governance (ESG) system on industries' GHG emissions. Besides improving worldwide emission databases and identifying hotspots, this research aims to promote a sustainable transition in both Bangladesh and other developing textile manufacturing nations across the globe.

Risk management for second-hand clothing imports in least developed countries: Legislations and perception of public-sector corruption.

The second-hand clothing imports are very popular in the least developed countries (LDCs). The social health risk (SHR) associated with second-hand clothing products and the lack of relevant legislations in LDCs, however, bring substantial challenges. This article is therefore developed to explore the sterilization legislation design for second-hand clothing supply chains in LDCs. To address LDCs' different import requirements of fumigation, both the extended exporter responsibility (EER) legislation scheme and the extended importer responsibility (EIR) legislation scheme are considered. We also examine whether the perception of public-sector corruption in LDCs may affect the performance of sterilization legislation schemes. We compare the performance of sterilization legislation schemes under different public-sector corruption cases, different sterilization legislation structures, as well as market competition. Interestingly, our analyses show that the EER and EIR legislation schemes can achieve the same performance under a per unit SHR duty, no matter whether there is public-sector corruption or not. However, these two legislation schemes perform differently under the lump-sum SHR duty. Besides, with the presence of the public-sector corruption perception, the prospect of financial benefits from bribing the regulatory agency can induce the firm to choose a higher optimal sterilization level when the bribe is sufficiently small. These implications complement the extant knowledge on risk management of second-hand clothing in LDCs, and provide an important guidance regarding the design of sterilization legislations on second-hand clothing imports.