Iodine/DMSO-mediated one-pot access towards 1-aryl-2-(pyrazol-5-yl)ethane-1,2-diones via a domino reaction from functionalized pent-2-ene-1,5-diones.

A facile one-pot cascade synthesis involving simultaneous in situ pyrazole formation followed by iodine/DMSO-mediated oxidation has been established to afford 1-aryl-2-(3-aryl)-1H-pyrazol-5-yl-ethane-1,2-diones. Primarily, a two-pot approach has been established which includes the reaction of 3-methylthio-1,5-diaryl-2-pentene-1,5-diones with hydrazine in the first step to afford pyrazole, which was eventually oxidized in the next steps in the presence of iodine in DMSO. Furthermore, we performed both steps in the same pot to afford 1,2-dicarbonyl compounds in good yield. The structure of one of the compounds was confirmed by single crystal X-ray analysis. DMSO served as a solvent as well as an oxidant. Moreover, N-substituted hydrazines provided 1-(1-substituted-3-aryl-1H-pyrazol-5-yl)-2-arylethane-1,2-diones regioselectively. Furthermore, for synthetic application, 1-aryl-2-(3-aryl)-1H-pyrazol-5-yl-ethane-1,2-diones were treated with o-phenylenediamine to afford pyrazole-functionalized quinoxaline in good yield. A control reaction was carried out to understand the mechanism of product formation.

Step-wise and one-pot synthesis of highly substituted conjugated trienes from 2-oxobenzo[h]chromenes/2H-pyran-2-ones.

A mild and efficient route for the synthesis of conjugated trienes via nitroethane-mediated ring contraction of 2-oxobenzo[h]chromenes/2H-pyran-2-ones followed by decarboxylative rearrangement of the obtained spirobutenolides and butenolides is described. The (E)-isomer of trienes was obtained by step-wise and one-pot approaches from 2-oxobenzo[h]chromenes. Butenolides 4a-l as new substrates have been developed for the construction of trienes. The mixture of the (E)- and (Z)-isomers of spirobutenolides undergoes decarboxylative rearrangement in the presence of sodium ethoxide as a base to yield the (E)-isomer of trienes, while the (E)-isomer of butenolides reacts to give a mixture of (2E,4E)- and (2E,4Z)-isomers of trienes in an almost steady ratio of 45 : 55 or 1 : 1.2. The structure and geometry of the obtained butenolides and trienes were confirmed by single-crystal X-ray analysis.

Base mediated synthesis of functionalized 2-(alkynyl)arylnitriles and their molecular docking study with aromatase receptor.

A simple, efficient, and transition metal-free approach to synthesize functionalized 2-(alkynyl)benzonitriles has been developed using suitably functionalized 2H-pyran-2-ones and 4-phenyl/trimethylsilanyl-but-3-yn-2-ones as precursors. The reaction proceeds in the presence of a base at room temperature to yield internal as well as terminal alkynes. The structure of the synthesized compound was confirmed by single-crystal X-ray analysis. The molecular docking study was performed to evaluate the binding mode of action of newly synthesized alkyne derivatives with known human breast cancer target receptor aromatase (PDB ID: 3EQM).

Luminescence feature of new 3,6-di(thiazolidin-5-one-2-yl)-carbazole derivative: synthesis, photophysical properties, density functional theory studies, and crystal shape effect.

A new carbazole chromophore conjugated with substituted thiazolidine-4-one (CzPT) was synthesized by applying the Knoevenagel reaction between 3,6-diformyl-N-hexylcarbazole and ethyl 2-aceto-2-(5-oxo-3-phenylthiazolidin-2-ylidene)acetate. The chemical structure of the new derivative (CzPT) was elucidated by spectral studies. The CzPT absorption spectra in different solvents exhibited a red shift for λmax by increasing solvent polarity. Bands at 430-474 nm appeared and were attributed to intramolecular charge transfer with high π-π* characteristics. CzPT fluorescence spectra exhibited a red shift after increasing the solvent polarity. To understand the Stokes' shift ( ∆ ν ¯ ) behaviour of the CzPT derivative referring to the polarity of solvents, Lippert-Mataga and linear solvation-energy relationship (LSER) models were employed in which the LSER exhibited respectable results compared with Lippert-Mataga (r2 = 0.9707). Moreover, time-dependent density functional theory absorption spectra in hexane and dimethylformamide showed that λmax had a major contribution in the highest occupied molecular orbital to lowest unoccupied molecular orbital transition in both solvents. In addition, the reduced uniformity of crystal features may lead to dislocation or anomalous arrangement of crystals with irregular spacing, which automatically enhances the optical properties of such crystals.

Aurintricarboxylic acid and its metal ion complexes in comparative virtual screening versus Lopinavir and Hydroxychloroquine in fighting COVID-19 pandemic: Synthesis and characterization.

The salt of Aurintricarboxylic acid (ATA) was utilized in this study to synthesize new alkaline earth metal ion complexes. The analytical results proposed the isolation of mononuclear (Sr+2&Ba+2) and binuclear complexes (Mg+2&Ca+2). These complexes were analyzed by available analytical and spectral techniques. The tetrahedral geometry was suggested for all complexes (SP3) through bidentate binding mode of ligand with each central atom. UV-Vis spectra reveal the influence of L â†’ M charge transfer and the estimated optical band gap mostly appeared close to that for known semiconductors. XRD, SEM and TEM studies were executed for new complexes and reflects the nano-crystallinity and homogeneous morphology. The structural forms of ATA and its complexes were optimized by DFT/B3LYP under 6-31G and LANL2DZ basis sets. The output files (log, chk &fchk) were visualized on program screen and according to numbering scheme, many physical features were obtained. It is worthy to note that, a virtual simulation for the inhibition affinity towards COVID-19 proteins as proactive study before the actual application, was done for ATA and its complexes. This was done in addition to drugs currently applied in curing (Hydroxychloroquine & Lopinavir), for comparison and recommendation. Drug-likeness parameters were obtained to evaluate the optimal pharmacokinetics to ensure efficacy. Furthermore, simulated inhibition for COVID-19 cell-growth, was conducted by MOE-docking module. The negative allosteric binding mode represents good inhibitory behavior of ATA, Ba(II)-ATA complex and Lopinavir only. All interaction outcomes of Hydroxychloroquine drug reflect unsuitability of this drug in treating COVID-19. On the other hand, there is optimism for ATA and Lopinvir behaviors in controlling COVID-19 proliferation.

Synthesis of antimicrobial azoloazines and molecular docking for inhibiting COVID-19.

Diverse new azoloazines were synthesized from the reaction of fluorinated hydrazonoyl chlorides with heterocyclic thiones, 1,8-diaminonaphthalene, ketene aminal derivatives, and 4-amino-5-triflouromethyl-1,2,4-triazole-2-thiol. The mechanistic pathways and the structures of all synthesized derivatives were discussed and assured based on the available spectral data. The synthesized azoloazine derivatives were evaluated for their antifungal and antibacterial activities through zone of inhibition measurement. The results revealed promising antifungal activities for compounds 4, 5, 17a,b, 19, and 25 against the pathogenic fungal strains used; Aspergillus flavus and Candida albicans compared to ketoconazole. In addition, compounds 4, 5, 19, and 25 showed moderate antibacterial activities against most tested bacterial strains. Molecular docking studies of the promising compounds were carried out on leucyl-tRNA synthetase active site of Candida albicans, suggesting good binding in the active site forming stable complexes. Moreover, docking of the synthesized compounds was performed on the active site of SARS-CoV-2 3CLpro to predict their potential as a hopeful anti-COVID and to investigate their binding pattern.

A [5 + 1] annulation strategy for the synthesis of multifunctional biaryls and p-teraryls from 1,6-Michael acceptor ketene dithioacetals.

A new type of ketene dithioacetal, 2-(3,3-bis-methylsulfanyl-1-arylallylidene)malononitriles containing 1,4 and 1,6-Michael acceptors, were synthesized to study their reactivity for the synthesis of a new molecular entity. We report a [5 + 1] annulation strategy for the construction of multifunctional biaryls and p-teraryls by the selection of a suitable nucleophilic source. The reaction of p-nitrotoluene with 2-(3,3-bis-methylsulfanyl-1-aryl-allylidene)malononitriles under basic conditions produces p-teraryls in good yields, while the use of nitroethane as the nucleophile source provides functionalized biaryls through cyclization, followed by denitration. This reaction requires mild conditions and exhibits good functional group tolerance.

Synthesis of alkynes from non-alkyne sources.

Alkynes are a very important class of compounds and used as precursors for the assembly of a variety of carbocycles and heterocycles. Alkynes are classified into two classes: terminal alkynes and internal alkynes. Terminal alkynes were used as one of the precursors for the synthesis of internal alkynes. Besides, various elimination reactions were conducted to obtain alkynes. Various applications of alkynes are known but no compiled review is reported so far regarding their synthesis. Therefore, we have compiled the literature available for the synthesis of various functionalized alkynes from non-alkyne sources in this review. We have not discussed the synthesis of internal alkynes from terminal alkynes. Based on the available literature, the synthesis of alkynes can be classified into three major types of reactions: (a) synthesis of alkynes through α,ß-elimination, (b) synthesis of alkynes through carbene rearrangement and (c) synthesis of alkynes via miscellaneous approaches. In this review, we have focused on the different methods available for these transformations including their scope, limitations and recent developments. We have also discussed the mechanism involved during the reaction.

Transition metal-free synthesis of sterically hindered allylarenes from 5-hexene-2-one.

A simple, efficient and transition metal-free strategy was established for the synthesis of highly functionalized, sterically hindered allylarenes (6, 7 & 8) by base-mediated ring transformation of 2-oxo-6-aryl-4-(methylthio/sec-amino)-2H-pyran-3-carbonitriles (3/4) with 5-hexene-2-one (5). This provides a method for the synthesis of allylarenes functionalized with different electron donating and withdrawing groups in one pot. The structures of isolated products 6c and 7a were ascertained by spectroscopic and single crystal X-ray diffraction analyses. In addition, we have performed a molecular docking study to predict the biological activity of the synthesized molecules for binding to estrogen receptor alpha (ERα) and estrogen receptor beta (ERß).

New Series of Thiazole Derivatives: Synthesis, Structural Elucidation, Antimicrobial Activity, Molecular Modeling and MOE Docking.

Based on the extensive biological activities of thiazole derivatives against different types of diseases, we are interested in the effective part of many natural compounds, so we synthesized a new series of compounds containing di-, tri- and tetrathiazole moieties. The formation of such derivatives proceeded via reaction of 2-bromo-1-(4-methyl-2-(methylamino)thiazol-5-yl)ethan-1-one with heterocyclic amines, o-aminothiophenol and thiosemicarbazone derivatives. The structure and mechanistic pathways for all products were discussed and proved based on spectral results, in addition to conformational studies. Our aim after the synthesis is to investigate their antimicrobial activity against various types of bacteria and fungi species. Preceeding such an investigation, a molecular docking study was carried out with selected conformers, as representative examples, against three pathogen-proteins. This preliminary stage could support the biological application. The potency of these compounds as antimicrobial agents has been evaluated. The results showed that derivatives which have di- and trithiazole rings displayed high activity that exceeds the used standard antibiotic.

Chemoselective synthesis of isolated and fused fluorenones and their photophysical and antiviral properties.

Highly functionalized fluorenones were synthesized by an intramolecular cyclization of 2''-halo-[1,1':3',1''-terphenyl]-4'-carbonitriles in the presence of n-butyllithium or lithium aluminium hydride. The precursor was synthesized by ring transformation of 2-oxo-6-aryl/heteroaryl-4-(sec.amino)-2H-pyran-3-carbonitriles or 2-oxobenzo[h]chromenes with o-bromo/chloro/fluoro-acetophenone under basic conditions in moderate yield. We performed the control experiment to understand the proposed mechanism and found that the presence of a secondary amine in the starting material directs the reactivity. The photophysical properties of 3-methoxy-7-(piperidin-1-yl)-5H-indeno[2,1-b]phenanthren-8(6H)-one was explored and solvent dependent emission was observed. These compounds were also tested against HIV-1 and low to moderate activity was observed.

Sensitive Spectrofluorimetric Study of the Interaction between Europium(III) and 1,2-Phenylenebis(azan-1-yl-1-ylidene) bis(methan-1-yl-1-ylidene)diphenol Schiff Base.

A sensitive and selective spectrofluorimetric method has been developed for the rapid determination of europium(III). This method is based on the formation of nonluminous complex between Eu(III) and a Schiff base reagent N, N'-bis (salicylidene)-1,2-phenylenediamine (PABD) and measuring the fluorescence quenching of Eu(III)-PABD complex at λex/em = 390/577 nm. The fluorescence intensity complex decreased linearly by increasing the Eu(III) concentration in the range of 1.0-13.0 µM. The optimum conditions for the complex formation were determined such as a pH .0 of borate buffer. The limits of detection (LOD) and quantification (LOQ) of Eu(III) were determined and found to be 0.217 and 0.653 µM, respectively. The maximum relative standard deviation of the method for an europium(III) standard of 6.0 µM was 2.07 % (n = 6). The proposed procedures could be applied successfully for the determination of the investigated metal ion in some spiked water samples with a good precision and accuracy compared to official and reported methods as revealed by t- and F-tests.

Synthesis, Spectral Characteristics and DFT Studies of the New Dye 2,7-diacetyl-9-((dimethylamino)methylene)-9H-fluorene (DMMF) in Different Solvents.

The photophysical parameters such as electronic absorption spectra, molar absorptivity(ε), fluorescence spectra and fluorescence quantum yield (φf) of a new dye namely 2,7-diacetyl-9-((dimethylamino)methylene)-9H-fluorene (DMMF) were determined in different solvents. The electronic absorption are less sensitive to medium polarity. A bathochromic shift was observed in emission spectra(ca. 50 nm) upon increase of solvent polarity, which indicates that the singlet excited state (S1) of DMMF is more polar than the singlet ground state (So). Solid crystals of DMMF exhibit intense yellow fluorescence maximum at 550 nm with bandwidth equal 64 nm upon excitation at wavelength 365 nm. The change in dipole moment value (Δµ) was calculated by using the variation of Stokes shift with solvent polarizability (Δf) (Lippert - Mataga plot) and was found to be 7.22 and 5.5 Debye for higher and lower energy of So - S1 (π-π*) H-1 → L and So - S1 (π-π*) H → L, respectively. These results show that, the excited state is more polar than the ground state. The net photochemical quantum yields of photodecomposition of DMMF (φc) were calculated as 7.2 × 10(-5), 1.14 × 10(-4), 1.44 × 10(-4) and 2.11 × 10(-4) in different solvents such as MeOH, CH2Cl2, CHCl3 and CCl4, respectively. DFT/TD-DFT methods were used to study the geometric and electronic structures of DMMF in different solvents. A good agreement was found between the experimental and theoretical results.

Synthesis of 1-amino-2-aroyl/acetylnaphthalenes through a base mediated one pot inter and intramolecular C-C bond formation strategy.

A new precursor 2-(1-cyano-2,2-bis(methylthio)vinyl)benzonitrile has been synthesized by the reaction of 2-cyanomethylbenzonitrile, carbon disulfide and methyl iodide under basic conditions. The reaction of 2-(1-cyano-2,2-bis(methylthio)vinyl)benzonitrile with various functionalized aryl/heteroaryl methyl ketones or acetone under basic conditions afforded 4-amino-3-aroyl/heteroaroyl/acetyl-2-methylsulfanylnaphthalene-1-carbonitriles in good yields through a (5C + 1C) annulation strategy; this involves sequential intermolecular, followed by intramolecular, C-C bond formation reactions. The structure of the product was confirmed by single crystal X-ray crystallography.

Highly efficient and stable AgI-CdO nanocomposites for photocatalytic and antibacterial activity.

For the last several decades, semiconducting materials and nanocomposites have received a lot of interest in generating highly efficient photocatalysts to destroy organic pollutants and eradicate bacteria. This study uses a simple deposition and precipitation approach at ambient temperature to create a unique and efficient AgI-CdO heterojunction. DRS, IR, SEM, EDS, XRD, EIS, and TEM were utilized to identify the material. SEM and TEM investigation depict the completely spherical, hexagonal forms and zigzag cubes for synthesized AgI-CdO. The EDX spectra reveal the presence of Ag, I, Cd, and O elements without impurity peaks showing that the prepared samples are highly pure. The activity of the synthesized materials was tested by degrading two different chromophoric dyes and a drug derivative (paracetamol) in an aqueous suspension under visible light. In addition, the activity of the most active catalyst was compared with Degussa P25, Fenton's reagent, and under sunlight for degradation of MB and RhB under similar conditions. Photolysis of paracetamol was also looked at using HPLC to identify intermediates formed in the photo-oxidation process. In addition, antibacterial activity was also investigated with the synthesized CdO-AgI nanocomposite in vitro against human pathogenic bacterial strains and compared with that of pure materials like AgI and standard ampicillin. The results showed excellent activity with the composite material, which could be due to the higher surface areas and the interactions between AgI and CdO nanoparticles. Quenching investigations revealed O2˙- and holes are principal reactive species. A viable photocatalytic degradation mechanism for organic pollutant elimination over the AgI-CdO nanocomposite has been sketched out based on the obtained results.

1,3-Dianionic annulation of ketones with ketene dithioacetal: a modified route to 3-aryl/cyclopropyl-5-thiomethyl-phenols and 1-(methylthio)-9,10-dihydrophenanthren-3-ols.

A simple and efficient base-mediated [3 + 3] cyclization of 1,3-dianionic ketones with 3,3-bis(methylthio)-1-arylprop-2-en-1-ones was developed to afford 3-hydroxy-biaryls, hydroxy-xylenes, and hydroxy-teraryls. Various tri- and tetra-substituted phenols were prepared from different symmetric and asymmetric ketones. The reaction of 2-(bis(methylthio)methylene)-3,4-dihydronaphthalen-1(2H)-ones with different ketones provided 1-(methylthio)-9,10-dihydrophenanthren-3-ols in very good yield. The scope of the reaction was further extended by the synthesis of cyclopropyl-functionalized phenols. One of the compounds was crystallized, and its structure was confirmed using the single-crystal X-ray approach.

Fabrication of Direct Z-Scheme CoNiWO4/Ph-gC3N4 Heterocomposites: Enhanced Photodegradation of Bisphenol A and Anticancer Activity.

Photocatalysis is realized by the design of a visible-light-active catalyst with robust redox capacity and broad absorption. In this study, a series of novel Z-scheme CoNiWO4/Ph-gC3N4 photocatalysts are synthesized to improve their redox property and photocatalytic activity toward broad visible light absorption. An intimate stable heterojunction is made between cobalt-nickel tungstate (CoNiWO4) and phenyl-doped graphitic carbon nitride (Ph-gC3N4), and its physicochemical properties are studied. The bifunctional properties of all of the synthesized materials were assessed by studying the decomposition of bisphenol A (BPA) and methyl orange (MO) dye as model pollutants, followed by an evaluation of their anticancer activity on human lung cancer cell lines. The photocatalyst with 20 wt % CoNiWO4 heterocomposite showed an enhanced response toward the removal of cancerous cells. The synthesized pristine CoNiWO4 and Ph-gC3N4 exhibit well-matched band structures and, hence, make it easier to create a Z-scheme heterocomposite. This may increase the lifetime of photoinduced charge carriers with a high redox power, thereby improving their photocatalytic and anticancer activity. An extensive analysis of the mechanism demonstrates that hydroxyl radicals (•OH) and superoxide radical anions (•O2-) are responsible for the degradation of organic compounds via Z-scheme charge transfer approach. These findings point toward a new route for creating effective Co-Ni tungstate-based direct Z-scheme photocatalysts for various redox processes, particularly the mineralization of resistant organic molecules.

Synthesis, structural characterization, antioxidant, cytotoxic activities and docking studies of schiff base Cu(II) complexes.

By combining hydrazide with 2-Acetylpyridine, a hydrazone ligand (HL) was successfully created. Several copper (II) salts have been used to create three copper (II) hydrazone complexes (acetate, sulphate, and chloride). The hydrazide ligand and its copper (II) complexes (1-3) were studied via variety of analytical techniques, including elemental analysis, electronic, infrared, UV-vis Spectrum, XRD study, thermal analysis, also molar conductivity amounts. The spectrum results indicate that in all complexes, the ligand exhibits monobasic tridentate behavior. Octahedral geometries were present in all metal complexes. The Coats-Redfern equations were used to compute and describe the dynamics properties of several steps of TGA (Ea, A, ΔH*, ΔS*, and ΔG*). Calculations using the density functional theory (DFT) were done at the molecular studio software toward examine ligands agent's and its complexes' best structures. The MCF-7 in addition to HepG-2 cell lines was resistant to tumor-inducing effects of the copper (II) chelates. The in vitro antioxidant capacities of all complexes have been estimated via DPPH free radical scavenger assays. Furthermore, zones of inhibition length accustomed to test antimicrobial effect of particular complexes in vitro towards Staphylococcus aureus (Gram positive bacteria) E. coli (Gram negative bacteria). Both absorption spectra and viscosity measurements in calf thymus DNA binding have been used to study the complexes. In order to explore docking research of copper (II) chelates, the crystallographic construction of the SARS-active CoV-2's site protein (PDB ID:6XBH) was used (COVID-19) and breast cancer distorted (PDB ID: 3hb5).

A spectroscopy based prototype for the noninvasive detection of diabetes from human saliva using nanohybrids acting as nanozyme.

The recent prediction of diabetes to be a global pandemic invites a detection strategy preferably non-invasive, and bloodless to manage the disease and the associated complications. Here, we have synthesized chitosan polymer functionalized, organic-inorganic bio-compatible nano-hybrids of Mn3O4 nanoparticles, and characterized it by utilizing several optical methodologies for the structural characterization which shows the Michaelis Menten (MM) kinetics for glucose and alpha-amylase protein (well-known diabetes biomarkers). We have also studied the potentiality for the detection of alpha-amylase in human salivary secretion which is reported to be strongly correlated with uncontrolled hyperglycemia. Finally, we have developed a prototype for the measurement of glucose (LOD of 0.38 mg/dL, LOQ of 1.15 mg/dL) and HbA1c (LOD of 0.15% and LOQ of 0.45%) utilizing the basic knowledge in the study for the detection of uncontrolled hyperglycemia at the point-of-care. With the limited number of clinical trials, we have explored the potential of our work in combating the diabetic pandemic across the globe in near future.

Colorimetric aflatoxins immunoassay by using silica nanoparticles decorated with gold nanoparticles.

Nanomaterials-based colorimetric immunoassays showed increasing attention for monitoring different biomarkers because of their unique optical and electrical features. Here, a highly sensitive and selective optical sensor was described for the determination of different aflatoxins (AFs). Mesoporous silica nanoparticles (m-SNPs) with an average particle size of 40 nm were prepared by the sol-gel method and then decorated with gold nanoparticles (AuNPs). The Au NPs@m-SiNPs nanocomposite with an average particle size of 66 nm was modified with AFs antibodies. The assay includes the following steps: the Au NPs@m-SiNPs nanocomposite was immersed with AFs antibodies, and then the AFs-Ab/Au NPs@m-SiNPs was used as a probe for AFs detection. The interaction between the AFs-Ab/Au NPs@m-SiNPs and the AFs has resulted in a change in its color from pink to violet. Measurements are performed by absorptiometry at a wavelength of 425 nm. The immunoassay works in the concentration range from 1 ng·mL-1 to 75 ng·mL-1 AFB1 and has a limit of detection 0.16 ng·mL-1 (at S/N = 3). The assay was applied to the determination of AFs in different food samples spiked with AFS. Finally, the assay was used to detect AFs in a real sample, and the LC-MS technique was used to verify the results.