Prevalence of asthma triggers and control status among pediatric asthmatic patients in Saudi Arabia.

AIM: This study aims to assess the prevalence of asthma triggers and control status among pediatric asthmatic patients in Saudi Arabia. METHODS: From October 2015 to March 2016, an Arabic version of the Asthma Trigger Inventory questionnaire and asthma control test (ACT) were distributed to 200 parents of children diagnosed with asthma at the pulmonary clinic of King Fahad Medical City in Riyadh, Saudi Arabia. Data were collected and analyzed using the Statistical Package for Social Sciences (SPSS) software version 29. Descriptive statistics of the participants were presented in frequencies, percentages, means, and standard deviations for categorical variables. RESULTS: The survey data revealed that the most prevalent asthma triggers among pediatric asthmatic children in Saudi Arabia were Arabic incense (Bakhour) with a mean score of 3.76 (±1.3), followed by being excited 3.70 (±1.5), and stress at home 3.58 (±1.4). Furthermore, the degree of asthma control among children with asthma in Saudi Arabia was 72.0% with a mean score of 17.7 (±4.7) for the ACT, indicating partial degree of asthma. CONCLUSIONS: Arabic incense (Bakhour) and psychological stimuli emerged as significant determinants of asthma triggers in Saudi Arabian children diagnosed with asthma. Further studies are warranted to elucidate the physiological mechanisms underpinning the response to Arabic incense (Bakhour).

Awareness and practice of airway pressure release ventilation mode in acute respiratory distress syndrome patients among nurses in Saudi Arabia.

BACKGROUND: This study aimed to assess the knowledge and current practice of using the airway pressure release ventilation (APRV) mode with acute respiratory distress syndrome (ARDS) patients and identify barriers to not using this mode of ventilation among nurses who work in critical areas in Saudi Arabia. METHODS: Between December 2022 and April 2023, a cross-sectional online survey was disseminated to nurses working in critical care areas in Saudi Arabia. The characteristics of the respondents were analyzed using descriptive statistics. Percentages and frequencies were used to report categorical variables. RESULTS: Overall, 1,002 nurses responded to the online survey, of whom 592 (59.1%) were female. Only 248 (24.7%) nurses had ever used APRV mode, whereas only 229 (22.8%) received training on APRV mode. Moreover, 602 (60.0%) nurses did not know whether APRV was utilized in their hospital. Additionally, 658 (65.6%) nurses did not know whether APRV mode was managed using a standard protocol. Prone positioning was the highest recommended intervention by 444 (43.8%) when a conventional MV failed to improve oxygenation in patients with ARDS. 323 (32.2%) respondents stated that the P-high should be set equal to the plateau pressure on a conventional ventilator, while 400 (39.9%) said that the P-low should match PEEP from a conventional ventilator. Almost half of the respondents (446, 44.5%) stated that the T-high should be set between 4 and 6 s, while 415 (41.4%) said that the T-low should be set at 0.4 to 0.8 s. Over half of the nurses (540, 53.9%) thought that the maximum allowed tidal volume during the release phase should be 4-6 ml/kg. Moreover, 475 (47.4%) believed that the maximum allowed P-high setting should be 35 cm H2O. One-third of the responders (329, 32.8%) stated that when weaning patients with ARDS while in APRV mode, the P-high should be reduced gradually to reach a target of 10 cm H2O. However, 444 (44.3%) thought that the T-high should be gradually increased to reach a target of 10 s. Half of the responders (556, 55.5%) felt that the criteria to switch the patient to continuous positive airway pressure (CPAP) were for the patient to have an FiO2 ≤ 0.4, P-high ≤ 10 cm H2O, and T-high ≥ 10 s. Lack of training was the most common barrier to not using APRV by 615 (61.4%). CONCLUSION: The majority of nurses who work in critical care units have not received sufficient training in APRV mode. A significant discrepancy was observed regarding the clinical application and management of APRV parameters. Inadequate training was the most frequently reported barrier to the use of APRV in patients with ARDS.

The utility of the necessity-concerns framework (NCF) in explaining adherence and parental beliefs about controller medication in Saudi Arabian children with asthma.

OBJECTIVE: This study aims to assess beliefs about asthma controller medications among parents of Saudi Arabian children with asthma and the association between these beliefs and medication adherence using the Necessity-Concerns Framework. METHODS: A cross-sectional survey was provided to parents of children with asthma when they brought their children to routine appointments at local public clinics between May 16 and July 10, 2018. Participants electronically filled out validated Arabic versions of the Medication Adherence Reported Scale (MARS) and Beliefs About Medications Questionnaire (BMQ). Descriptive statistics were used to characterize the study participants, while hierarchical linear regression analysis assessed associations between parental beliefs about controller medications and medication adherence. RESULTS: A total of 381 parents of children with asthma completed the study survey. The vast majority (89%) of study participants were non-adherent to their children's prescribed medications while only 11% were adherent. Additionally, our study revealed a significantly positive association between adherence and parents' beliefs in the necessity of the medication (p < .001), with concerns about the adverse effects of medication being negatively associated with parental adherence. A higher mean score for medication adherence was reported among the ambivalent groups compared to the accepting, indifferent, and skeptical groups. CONCLUSIONS: Medication adherence among parents of children with asthma was relatively low. In addition, necessity beliefs were significantly associated with parental adherence to controller medications for their children with asthma. Further studies are warranted to investigate potential factors contributing to poor parental adherence and develop tailored interventions that support parental medication adherence for their asthmatic children.

Feasibility and Safety of Oxaliplatin-Based Pressurized Intraperitoneal Aerosol Chemotherapy With or Without Intraoperative Intravenous 5-Fluorouracil and Leucovorin for Colorectal Peritoneal Metastases: A Multicenter Comparative Cohort Study.

BACKGROUND: This retrospective multicenter cohort study compared the feasibility and safety of oxaliplatin-based pressurized intraperitoneal aerosol chemotherapy (PIPAC-Ox) with or without intraoperative intravenous 5-fluorouracil (5-FU) and leucovorin (L). METHODS: Our study included consecutive patients with histologically proven unresectable and isolated colorectal peritoneal metastases (cPM) treated with PIPAC-Ox in seven tertiary referral centers between January 2015 and April 2020. Toxicity events and oncological outcomes (histological response, progression-free survival, and overall survival) were compared between patients who received intraoperative intravenous 5-FU/L (PIPAC-Ox + 5-FU/L group) and patients who did not (PIPAC-Ox group). RESULTS: In total, 101 patients (263 procedures) were included in the PIPAC-Ox group and 30 patients (80 procedures) were included in the PIPAC-Ox + 5-FU/L group. Common Terminology Criteria for Adverse Events v4.0 grade 2 or higher adverse events occurred in 48 of 101 (47.5%) patients in the PIPAC-Ox group and in 13 of 30 (43.3%) patients in the PIPAC-Ox + 5-FU/L group (p = 0.73). The complete histological response rates according to the peritoneal regression grading score were 27% for the PIPAC-Ox + 5-FU/L group and 18% for the PIPAC-Ox group (p = 0.74). No statistically significant differences were observed in overall or progression-free survival between the two groups. CONCLUSIONS: The safety and feasibility of PIPAC-Ox + 5-FU/L appears to be similar to the safety and feasibility of PIPAC-Ox alone in patients with unresectable cPM. Oncological outcomes must be evaluated in larger studies.

Depression and anxiety during the COVID-19 pandemic in Saudi Arabia: A cross-sectional study.

AIMS: The emergence of the COVID-19 global pandemic, with a high transmission and mortality rate, has created an extraordinary crisis worldwide. Such an unusual situation may have an undesirable impact on the mental health of individuals which, in turn, may influence their outcomes. This study aimed to explore the influence of the COVID-19 pandemic on the psychological disposition of residents of the Kingdom of Saudi Arabia. METHODS: A cross-sectional study using an online survey was conducted in Saudi Arabia between 27 March and 27 April 2020. The Patient Health Questionnaire (PHQ-9) and Generalised Anxiety Disorder-7 (GAD-7) were used to assess depression and anxiety. Logistic regression analysis was used to identify predictors of these. RESULTS: A total of 2081 individuals participated in the study. The prevalence of depression and anxiety among the study participants was 9.4% and 7.3% respectively. Non-Saudi residents, individuals aged 50 years and above, divorced people, retired people, university students and those with an income between 2000 and 10 000 SR were at higher risk of developing depression. Saudi individuals, married people, the unemployed and those with a high income (>10 000 RS) were at higher risk of developing anxiety. CONCLUSION: We found that there is a wide range of Saudi residents who are at higher risk of developing mental illness during the current COVID-19 pandemic. Policymakers and mental healthcare providers are advised to provide continuous monitoring of the psychological consequences during this pandemic and provide the required health support.

The association between internet addiction and sleep quality among medical students in Saudi Arabia.

BACKGROUND: Sleep is one of the fundamental human needs, essential for maintaining a high quality of life and mental and physical well-being across all age groups. Poor sleep quality often stems from negative lifestyle habits, including excessive internet usage. Therefore, it is important to determine the prevalence of internet gaming disorder among youth in Saudi Arabia and to examine the relationship between internet addiction levels and sleep quality. METHODS: Data were collected from 338 medical students in the southern region of Saudi Arabia (mean age = 21.2 years, standard deviation = 3.29 years). Participants completed an online questionnaire comprising the Internet Addiction Test (IAT) and the Pittsburgh Sleep Quality Index (PSQI). Data analysis employed iterations, chi-square tests, Pearson correlation coefficients, and ANOVA. RESULTS: The results revealed that 21% of the participants exhibited severe internet addiction, while 31% displayed moderate internet addiction. Furthermore, the findings indicated a positive correlation between sleep quality and the severity of internet addiction. Sleep quality symptoms explained 75% of the variance in Internet addiction scores, even after controlling for demographic variables. Additional bivariate analyses revealed that individuals who spent six or more hours online daily were more likely to experience symptoms of poor sleep quality and exhibit a higher severity of internet addiction. Additionally, Men were more susceptible to developing internet addiction compared to women. Moreover, students with internet addiction tended to have lower academic achievements. CONCLUSION: These findings, while exploratory, offer valuable insights into potential interventions, strategies, and programs for mitigating internet addiction and enhancing sleep quality among medical college students.

Effect of Duplication Techniques on the Fitting Accuracy of CAD-CAM Milled, 3D-Printed, and Injection-Molded Mandibular Complete Denture Bases.

BACKGROUND: Digital technology has been introduced in prosthodontics, and it has been widely used in denture duplication instead of a conventional denture duplication technique. However, research comparing different denture duplication techniques and how they affect the fitting accuracy of the denture base is scarce. OBJECTIVES: The aim was to assess the impact of duplication techniques on the accuracy of the fitting surface of computer-aided design and manufacturing (CAD-CAM) milled, 3D-printed, and injection-molded complete denture bases (CDBs). METHODOLOGY: This study involved fabricating a mandibular complete denture base with three marked dimples as reference marks (A, B, and C at the incisive papilla, right molar, and left molar areas) using a conventional compression molded technique. This denture was then scanned to generate a standard tessellation language (STL) file; after that, it was duplicated using three different techniques (milling, 3D printing, and injection molding) and five denture base resin materials-two milled CAD-CAM materials (AvaDent and IvoBase), two 3D-printed materials (NextDent and HARZ Labs), and one injection-molded material (iFlextm). Based on the denture base type, the study divided them into five groups (each with n = 10). An evaluation of duplication accuracy was conducted on the fitting surface of each complete denture base (CDB) using two assessment methods. The first method was a two-dimensional evaluation, which entailed linear measurements of the distances (A-B, A-C, and B-C) between reference points on both the scanned reference mandibular denture and the duplicated dentures. Additionally, a three-dimensional superimposition technique was employed, involving the overlay of the STL files of the dentures onto the reference denture's STL file. The collected data underwent statistical analysis using a one-way analysis of variance and Tukey's pairwise post hoc tests. RESULTS: Both evaluation techniques showed significant differences in fitting surface accuracy between the tested CDBs (p ˂ 0.001), as indicated by one-way ANOVA. In addition, the milled CDBs (AvaDent and IvoBase) had significantly higher fitting surface accuracy than the other groups (p ˂ 0.001) and were followed by 3D-printed CDBs (NextDent and HARZ Labs), while the injection-molded (iFlextm) CDBs had the lowest accuracy (p ˂ 0.001). CONCLUSIONS: The duplication technique of complete dentures using a CAD-CAM milling system produced superior fitting surface accuracy compared to the 3D-printing and injection-molded techniques.

The prevalence and sociodemographic determinants of tobacco and nicotine use among students in healthcare disciplines in Saudi Arabian universities: a cross-sectional survey.

Background: Tobacco smoking is one of the most significant health-related problems worldwide. However, the prevalence and sociodemographic determinants of tobacco and nicotine use among students on healthcare courses in Saudi Arabia are limited. Methods: This cross-sectional study used a questionnaire that was distributed via SurveyMonkey between November 2022 and June 2023 to all student universities offering healthcare courses. Data are presented as frequency and percentages. The associated sociodemographic factors with current tobacco and nicotine use were subjected to logistic regression. Results: Overall, 5,012, of whom 3,872 (77.25%) were males, responded to the online survey. The prevalence of current tobacco and nicotine use was 3,553 (71%). The majority of users used electronic nicotine delivery systems (1,622: 32.36%). The current use of cigarettes (AOR: 1.75 (1.42 to 2.15)), e-cigarettes (AOR: 1.17 (1.01 to 1.37)), and smokeless tobacco substances (AOR: 1.35 (1.02 to 1.90)) were more pronounced among males compared to female students. However, the current use of a hookah was less among males (AOR: 0.74 (95% CI: 61 to 0.91)). Smoking cigarettes was practiced less among students living in other regions compared to the Central Region. However, smokeless tobacco substances seem to be more prevalent in the Western, Southern, and Northern Regions, (AOR: 1.57 (95% CI: 1.09 to 2.26)), (AOR: 1.43 (95% CI: 1.04 to 1.95)), and (AOR: 1.57 (95% CI: 1.09 to 2.26)), respectively. Conclusion: Smoking is prevalent among students in the healthcare disciplines, with electronic nicotine delivery systems being the most used product. Several sociodemographic factors were associated with higher tobacco or nicotine use.

Obesity Prevalence and Association with Spirometry Profiles, ICU Admission, and Comorbidities Among Patients with COPD: Retrospective Study in Two Tertiary Centres in Saudi Arabia.

Background: Obesity is common among chronic obstructive pulmonary disease (COPD) patients and is associated with an increase in acute exacerbation episodes. However, data on obesity's impact on and association with clinical outcomes among patients with COPD are limited. This study aimed to determine overweight and obesity prevalence and associations with spirometry profiles, intensive care unit (ICU) admission, and comorbidities in patients with COPD. Methods: In this retrospective cohort study, we reviewed the electronic health records of adult individuals diagnosed with COPD who visited the studied pulmonary clinics between 1 January 2018 and 31 December 2022 and then collected key demographic variables and relevant clinical outcomes and comorbidities. Results: A total of 474 patients with COPD were included in the final analysis, of whom 60% were male. The occurrences of overweight and obesity were 32.7% and 38.2%, respectively. The presence of comorbidities was high in obese patients (78.4%), followed by overweight patients (63.8%) with COPD. Obese and overweight patients had the highest ward admission rates (38.3% and 34.2%, respectively). ICU admissions were higher in obese and overweight patients (16% and 12%, respectively) compared with normal-weight patients (9%). Although no significant correlation was found between body mass index and spirometry parameters, comorbidities and ICU admission were linked to overweight and obesity in COPD patients (AOR: 1.82 95% CI: 1.15 to 2.86 and AOR: 3.34 95% CI 1.35 to 8.22, respectively). Conclusion: Our findings imply that obesity in COPD is prevalent and is associated with adverse clinical outcomes including a greater number of comorbidities and higher rates of hospitalization and admission to ICUs although no associations were found between body weight and spirometry parameters. Further studies are needed to assess whether implementing and optimising obesity screening and management at an early stage in COPD can prevent further deterioration.

Spirometry profiles of overweight and obese individuals with unexplained dyspnea in Saudi Arabia.

Background: Obesity is a common cause of dyspnea. However, the impacts of obesity on spirometry parameters, particularly among individuals with unexplained dyspnea, have not been well investigated. Objectives: This study aimed to explore the prevalence of overweight and different classes of obesity and their effect on spirometry parameters among subjects with unexplained dyspnea in Saudi Arabia. Methods: We conducted a retrospective electronic medical record review of individuals with unexplained dyspnea who visited our pulmonary clinic between January 2016 and December 2022 and assessed the association of body mass index (BMI) with spirometry parameters. After we classified the subjects based on their BMI values, we determined the impacts of increased BMI on spirometry parameters. Results: The sample included a total of 978 subjects with unexplained dyspnea. The prevalence of overweight and obesity among our study sample was high (33 % and 47 %, respectively). All spirometry parameters: forced vital capacity (FVC) L, forced expiratory volume in 1 s (FEV1) L, forced expiratory flow at 25-75 % (FEF 25-75 %) L/sec and peak expiratory flow (PEF) L/sec were significantly lower in obese individuals with dyspnea compared to normal weight subjects. In addition, our findings showed a negative correlation between BMI and FVC, FEV1, FEF 25-75 %, and PEF. Conclusion: The high prevalence of obesity and overweight and the impairment of lung function because of high body weight among subjects with dyspnea point to the need for routine assessment and the evaluation of nutritional status in primary health care facilities for early intervention.

Clinical Practice of High-Flow Nasal Cannula Therapy in ARDS Patients: A Cross-Sectional Survey of Respiratory Therapists.

Background: High-flow nasal cannula (HFNC) is an essential non-invasive oxygen therapy in acute respiratory distress syndrome (ARDS) patients. Despite its wide use, research assessing the knowledge, practice, and barriers to using HFNC among respiratory therapists (RT) is lacking. Methods: A cross-sectional questionnaire was conducted among RTs in Saudi Arabia between December 19, 2022, and July 15, 2023. Data were analyzed as means and standard deviation or frequency and percentages. A Chi-square test was used to compare the differences between groups. Results: A total of 1001 RTs completed the online survey. Two-thirds of the respondents 659 (65.8%) had received training in using HFNC and 785 (78.4%) had used HFNC in clinical settings. The top conditions for HFNC indication were COVID-19 (78%), post-extubation (65%), and do-not-intubate patients (64%). Participants strongly agreed that helping maintain conversation and eating abilities (32.95%) and improving shortness of breath (34.1%) were advantages of HFNC. Surprisingly, 568 (57%) of RT staff did not follow a protocol for HFNC with ARDS patients. When starting HFNC, 40.2% of the participants started with FiO2 of 61% to 80%. Additionally, high percentages of RT staff started with a flow rate between 30 L/minute and 40 L/minute (40.6%) and a temperature of 37°C (57.7%). When weaning ARDS patients, 482 (48.1%) recommended first reducing gas flow by 5-10 L/minute every two to four hours. Moreover, 549 (54.8%) believed that ARDS patients could be disconnected from HFNC if they achieved a flow rate of <20 L/minute and FiO2 of <35%. Lack of knowledge was the most common challenge concerning HFNC implementation. Conclusion: The findings revealed nuanced applications marked by significant endorsement in certain clinical scenarios and a lack of protocol adherence, underscoring the need for uniform, evidence-based guidelines and enhanced training for RTs. Addressing these challenges is pivotal to optimizing the benefits of HFNC across varied clinical contexts.

Ultra-Violet-Assisted Scalable Method to Fabricate Oxygen-Vacancy-Rich Titanium-Dioxide Semiconductor Film for Water Decontamination under Natural Sunlight Irradiation.

This work reports the fabrication of titanium dioxide (TiO2) nanoparticle (NPs) films using a scalable drop-casting method followed by ultra-violet (UV) irradiation for creating defective oxygen vacancies on the surface of a fabricated TiO2 semiconductor film using an UV lamp with a wavelength oof 255 nm for 3 h. The success of the use of the proposed scalable strategy to fabricate oxygen-vacancy-rich TiO2 films was assessed through UV-Vis spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The Ti 2p XPS spectra acquired from the UV-treated sample showed the presence of additional Ti3+ ions compared with the untreated sample, which contained only Ti4+ ions. The band gap of the untreated TiO2 film was reduced from 3.2 to 2.95 eV after UV exposure due to the created oxygen vacancies, as evident from the presence of Ti3+ ions. Radiation exposure has no significant influence on sample morphology and peak pattern, as revealed by the SEM and XRD analyses, respectively. Furthermore, the photocatalytic activity of the fabricated TiO2 films for methylene-blue-dye removal was found to be 99% for the UV-treated TiO2 films and compared with untreated TiO2 film, which demonstrated only 77% at the same operating conditions under natural-sunlight irradiation. The proposed UV-radiation method of oxygen vacancy has the potential to promote the wider application of photo-catalytic TiO2 semiconductor films under visible-light irradiation for solving many environmental and energy-crisis challenges for many industrial and technological applications.

Physical Properties of E143 Food Dye as a New Organic Semiconductor Nanomaterial.

Organic semiconductors (OSCs) have attracted considerable attention for many promising applications, such as organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs), and organic photovoltaics (OPVs). The present work introduced E143 food dye as a new nanostructured organic semiconductor that has several advantages, such as low cost, easy fabrication, biocompatibility, and unique physical properties. The material was characterized using a transmission electron microscope (TEM), Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), and optical absorption spectroscopy. The study of X-ray diffraction (XRD) showed that E143 dye has a monoclinic polycrystalline structure. Electrical and dielectric properties were performed by impedance spectroscopy at frequencies (20 Hz-1 MHz) in the temperature range (303-473 K). The values of interband transitions and activation energy recommended the application of E143 dye as a new organic semiconductor material with promising stability, especially in the range of hot climates such as KSA.

The Effect of Full-Scale Exchange of Ca2+ with Zn2+ Ions on the Crystal Structure of Brushite and Its Phase Composition.

This study was carried out to investigate the effect of a complete exchange of Ca2+ with Zn2+ ions on the structure of brushite (CaHPO4·2H2O), which might be advantageous in the production process of CaxZn1-xHPO4·nH2O. To acquire the starting solutions needed for the current study, (NH4)2HPO4, Ca(NO3)2·4H2O, and Zn(NO3)2·6H2O were utilized in several molar concentrations. The findings indicate that Ca is partly substituted by Zn when the Zn/Ca molar ratio is below 0.25 and that Zn doping hinders the crystallization of brushite. A continued increase in the Zn/Ca molar ratio to 1 (at which point the supersaturation of the Zn solution rises) led to a biphasic compound of monoclinic brushite and parascholzite precipitate. Elevating the Zn/Ca molar ratio to 1.5 resulted in a precipitate of a parascholzite-like mineral. Finally, increasing the Zn/Ca molar ratio to 4 and above resulted in the formation of the hopeite mineral. Future biomaterial production with specific and bespoke characteristics can be achieved by adjusting the Zn/Ca ratio in the starting solution. It Rhas been established that the Zn/Ca ratio in the starting solution can be adjusted to obtain minerals with specific compositions. Thus, new synthesis methods for parascholzite and hopeite were introduced for the first time in this manuscript.

Prevalence of Nomophobia and Its Impact on Academic Performance Among Respiratory Therapy Students in Saudi Arabia.

Background: Nomophobia has been highly prevalent among health discipline students. However, there is no available data on the prevalence of nomophobia among respiratory therapy (RT) students in Saudi Arabia. Methods: A cross-sectional survey using the nomophobia questionnaire (NMP-Q) was conducted and distributed using a convenience sample of RT students through an online platform (Survey Monkey) between September and November 2022. Results: Overall, 1428 RT students, with males accounting for 773 (54%), responded to the online survey. The prevalence of nomophobia among RT students was 97.3% (1390). The mean (±SD) of the total NMP-Q items scores was 62 (±22), indicating a moderate level of nomophobia among the RT students. Female RT students had significantly higher nomophobia scores than male RT students (63 (47-80) vs 59 (43-75); p <0.001)). Single RT students had significantly higher nomophobia scores than married RT students (62 (46-78) vs 46 (37-64); p <0.001)). RT students who were living outside the family home had significantly higher nomophobia scores than RT students who were living with their family (66 (54-78) vs 60 (44-77); p = 0.001)). RT students with a GPA of 4.50 to 5.00 had the highest nomophobia score (63 (46-79); p = 0.005)). RT students who were in their third year had the highest nomophobia score (66 (48-80); p <0.001)). RT students who reported no academic warnings had the highest nomophobia score (63 (48-80); p <0.001)). RT students who spent ≥ five hours studying per week had the highest nomophobia score (64 (51-80); p <0.001)). Conclusion: Nomophobia is common among RT students, with the majority experiencing a moderate level. Being female, single, living outside the family home, and having a higher academic performance were risk factors associated with higher nomophobia levels.

Preparation and Characterization of Mono- and Biphasic Ca1-xAgxHPO4·nH2O Compounds for Biomedical Applications.

This study aimed to explore the effects of the full-scale replacement (up to 100%) of Ca2+ ions with Ag1+ ions in the structure of brushite (CaHPO4·2H2O). This substitution has potential benefits for producing monophasic and biphasic Ca1-xAgxHPO4·nH2O compounds. To prepare the starting solutions, (NH4)2HPO4, Ca(NO3)2·4H2O, and AgNO3 at different concentrations were used. The results showed that when the Ag/Ca molar ratio was below 0.25, partial substitution of Ca with Ag reduced the size of the unit cell of brushite. As the Ag/Ca molar ratio increased to 4, a compound with both monoclinic CaHPO4·2H2O and cubic nanostructured Ag3PO4 phases formed. There was a nearly linear relationship between the Ag ion ratio in the starting solutions and the wt% precipitation of the Ag3PO4 phase in the resulting compound. Moreover, when the Ag/Ca molar ratio exceeded 4, a single-phase Ag3PO4 compound formed. Hence, adjusting the Ag/Ca ratio in the starting solution allows the production of biomaterials with customized properties. In summary, this study introduces a novel synthesis method for the mono- and biphasic Ca1-xAgxHPO4·nH2O compounds brushite and silver phosphate. The preparation of these phases in a one-pot synthesis with controlled phase composition resulted in the enhancement of existing bone cement formulations by allowing better mixing of the starting ingredients.

Prevalence of Nomophobia and Its Association with Academic Performance Among Physiotherapy Students in Saudi Arabia: A Cross- Sectional Survey.

Background: Nomophobia is common among students in many healthcare disciplines, and its association with academic performance has been explore before. However, there is no available data on its prevalence and association with academic performance among undergraduate physiotherapy (PT) students in Saudi Arabia. Methods: Between 22 December 2022 and 30 January 2023, a cross-sectional survey was conducted by dissemination using an online platform (Survey Monkey). Results: In total, 806 PT students, with males accounting for 494 (61%), responded to the survey. The prevalence of nomophobia among PT students was 98.4% (793). The mean (±SD) of the total NMP-Q items scores was 49 (±17), indicating a mild level of nomophobia. Female PT students had significantly higher nomophobia scores than the males (47 (39-65); 44 (38-52); (p < 0.001)). Non-smokers had significant higher nomophobia scores than smokers (46 (38-61); 44 (38-49); (p = 0.004)). Regarding grade point averages (GPA), the students with a GPA of less than 3.49 had the highest nomophobia score (51 (43-74); p <0.001)). Concerning the stage of their studies, bridging students had the highest nomophobia score (51 (34-76); p = 0.023)). Regarding academic warnings, those who reported no academic warnings had the highest nomophobia score (46 (42-50); p = 0.023)). Finally, regarding study hours, the students who spent ≥ five hours studying per week had the highest nomophobia score (54 (42-68); p < 0.001)). Conclusion: Nomophobia is common among PT students, with the majority experiencing a mild level. Being female, non-smoker, and having a higher academic performance were risk factors associated with higher nomophobia levels.

Knowledge and practice of using airway pressure release ventilation mode in ARDS patients: A survey of physicians.

Background: Limited data is available on awareness and clinical management of the airway pressure release ventilation (APRV) mode of ventilation for acute respiratory distress syndrome (ARDS) patients among physicians who work at in adult critical areas. This study aimed to assess the knowledge and current practice of using APRV mode with ARDS patients and identify barriers to not using this mode of ventilation among physicians who work in adult critical areas in Saudi Arabia. Methods: Between November 2022 and April 2023, a cross-sectional online survey was disseminated to physicians who work in adult critical areas in Saudi Arabia. The characteristics of the respondents were analyzed using descriptive statistics. Percentages and frequencies were used to report categorical variables. Results: Overall, 498 physicians responded to the online survey. All responders (498, 100 %) reported that APRV is indicated in patients with ARDS, but 260 (52.2 %) did not know if there was an institutionally approved APRV protocol. Prone positioning was the highest recommended intervention by 164 (33.0 %) when a conventional MV failed to improve oxygenation in patients with ARDS. 136 (27.3 %) responders stated that the P-high should be set equal to the plateau pressure on a conventional ventilator while 198 (39.8 %) said that P-low should be 0 cmH2O. Almost half of (229, 46.0 %) responders stated that the T-high should be set between 4 and 6 s, while 286 (57.4 %) said that the T-low should be set at 0.4-0.8 s. The maximum allowed tidal volume during the release phase should be 4-6 ml/kg. Moreover, just over half (257, 51.6 %) believed that the maximum allowed P-high setting should be 35 cmH2O. One third of the responders (171, 34.3 %) stated that when weaning patients with ARDS while in APRV mode, the P-high should be reduced gradually to reach a target of 10 cmH2O. However, 284 (36.9 %) thought that the T-high should be gradually increased to reach a target of 10 s. Most responders (331, 66.5 %) felt that the criteria to switch the patient to CPAP would be to have an FiO2 ≤ 0.4, P-high ≤10 cm H2O, and T-high ≥10 s. Lack of training has been the most common barrier to not using APRV by 388 (77.9 %). Conclusion: There is a lack of consensus on the use of APRV mode, probably due to several barriers. While there were some agreements on the management of ventilation and oxygenation, there were variations in the selection of the initial setting of APRV. Education, training, and the presence of standardized protocols may help to provide better management.

Investigating Confidence Levels of Saudi Clinical Supervisors in Radiology Departments.

Background: Effective teaching and supervision within hospitals play an essential role in training radiography students. However, inadequate preparation of teaching roles has been highlighted over the last three decades as a problem for many radiographers. This can lead to inadequate preparation and a lack of confidence in the supervisory role, which may affect the students' learning experience. Few studies in Saudi Arabia have investigated the skills and resources needed by radiographers to become effective and confident teachers. Therefore, this study aimed to explore the experiences and confidence of clinical radiographers in teaching radiography students and establish the areas of support they require to be more effective in their clinical teaching role. Methods: An online questionnaire and semi-structured interviews were used to collect data from radiographers working in Saudi Arabia's radiology departments. Radiographers who were involved in the supervision of students are included in the study. A total of 159 radiographers participated in the study. Results: The findings showed that radiographers were reasonably confident in four domains: introducing students and familiarizing them within the practice environment, supervision, facilitating students' learning, and assisting students to integrate into the practice environment while some areas required further development. The finding also indicated high number of students believed that providing an accurate perspective on the philosophy of the environment is not applicable to them. Conclusion: The article concludes with a recommendation for further support and guidance for radiographers in teaching roles from institutions. The study provided insights into the world of clinical supervisors in radiology departments. Informative feedback to students during their clinical training by clinical supervisors is a key strategy to fill the gap between theory and practice experienced by students. Additionally, the importance for implementation of ongoing professional development for radiographers is advised to ensure the quality of clinical placement for radiography students.

Enhanced Spin-Orbit Coupling in Heavy Metals via Molecular Coupling.

5d metals are used in electronics because of their high spin-orbit coupling (SOC) leading to efficient spin-electric conversion. When C60 is grown on a metal, the electronic structure is altered due to hybridization and charge transfer. In this work, we measure the spin Hall magnetoresistance for Pt/C60 and Ta/C60, finding that they are up to a factor of 6 higher than those for pristine metals, indicating a 20-60% increase in the spin Hall angle. At low fields of 1-30 mT, the presence of C60 increased the anisotropic magnetoresistance by up to 700%. Our measurements are supported by noncollinear density functional theory calculations, which predict a significant SOC enhancement by C60 that penetrates through the Pt layer, concomitant with trends in the magnetic moment of transport electrons acquired via SOC and symmetry breaking. The charge transfer and hybridization between the metal and C60 can be controlled by gating, so our results indicate the possibility of dynamically modifying the SOC of thin metals using molecular layers. This could be exploited in spin-transfer torque memories and pure spin current circuits.