Rapid Single-Step Detection of Polyfluoroalkyl Substances (PFAS) Using Electropolymerized Phenoxazine Dyes.

Per- and polyfluoroalkyl substances (PFAS) are highly stable ubiquitous contaminants that have been recently added to the list of regulated chemicals. While methods for PFAS detection exist, analysis is difficult, involving a tedious protocol and expensive instrumentation. Here, we demonstrate the first implementation of a phenoxazine dye as a sensing probe that facilitates rapid and inexpensive detection of representative PFAS, e.g., perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA), at sensitivity levels covering the recently established Environmental Protection Agency (EPA) limits. The method comprises an electrode modified with a stable redox film of Meldola blue (MB) in its electropolymerized form (epMB), which provides amino sites for electrostatic interactions with PFAS. Long-chain PFAS bind specifically to the epMB, inducing a hydrophobic-type cluster formation through ion-pair and F-F interactions. This binding generates concentration-dependent changes in the epMB/epMB+ oxidation, enabling rapid and sensitive quantification in a single step with high sensitivity, reaching a limit of detection of 0.4 ppt for PFOS and 1.65 ppt for PFOA. The sensor demonstrates good selectivity toward common interfering compounds like humic acid, sodium chloride and fluoride, metallic ions (Cu, Hg, As), as well as pesticides. In addition to PFOS and PFOA, the sensors can measure other perfluoroalkyl compounds, demonstrating potential as a tool for rapid quantification of a total PFAS index, with affinity for long-chain PFAS. This work highlights the integration of redox receptors into an electrochemical sensor to solve the grand challenge of PFAS analysis using a rapid and inexpensive procedure, with potential for field deployment.

A multifunctional N-GO/PtCo nanocomposite bridged carbon fiber interface for the electrochemical aptasensing of CA15-3 oncomarker.

The development of integrated analytical devices is crucial for advancing next-generation point-of-care platforms. Herein, we describe a facile synthesis of a strongly catalytic and durable Nitrogen-doped graphene oxide decorated platinum cobalt (NGO-PtCo) nanocomposite that is conjugated with target-specific DNA aptamer (i-e. MUC1) and grown on carbon fiber. Benefitting from the combined features of the high electrochemical surface area of N-doped GO, high capacitance and stabilization by Co, and high kinetic performance by Pt, a robust, multifunctional, and flexible nanotransducer surface was created. The designed platform was applied for the specific detection of a blood-based oncomarker, CA15-3. The electrochemical characterization proved that nanosurface provides a highly conductive and proficient immobilization support with a strong bio-affinity towards MUC1 aptamer. The specific interaction between CA15-3 and the aptamer alters the surface properties of the aptasensor and the electroactive signal probe generated a remarkable increase in signal intensity. The sensor exhibited a wide dynamic range of 5.0 × 10-2 -200 U mL-1, a low limit of detection (LOD) of 4.1 × 10-2 U mL-1, and good reproducibility. The analysis of spiked serum samples revealed outstanding recoveries of up to 100.03 %, by the proposed aptasensor. The aptasensor design opens new revelations in the reliable detection of tumor biomarkers for timely cancer diagnosis.

Covalent organic frameworks (COFs) as carrier for improved drug delivery and biosensing applications.

Porous organic frameworks (POFs) represent a significant subclass of nanoporous materials in the field of materials science, offering exceptional characteristics for advanced applications. Covalent organic frameworks (COFs), as a novel and intriguing type of porous material, have garnered considerable attention due to their unique design capabilities, diverse nature, and wide-ranging applications. The unique structural features of COFs, such as high surface area, tuneable pore size, and chemical stability, render them highly attractive for various applications, including targeted and controlled drug release, as well as improving the sensitivity and selectivity of electrochemical biosensors. Therefore, it is crucial to comprehend the methods employed in creating COFs with specific properties that can be effectively utilized in biomedical applications. To address this indispensable fact, this review paper commences with a concise summary of the different methods and classifications utilized in synthesizing COFs. Second, it highlights the recent advancements in COFs for drug delivery, including drug carriers as well as the classification of drug delivery systems and biosensing, encompassing drugs, biomacromolecules, small biomolecules and the detection of biomarkers. While exploring the potential of COFs in the biomedical field, it is important to acknowledge the limitations that researchers may encounter, which could impact the practicality of their applications. Third, this paper concludes with a thought-provoking discussion that thoroughly addresses the challenges and opportunities associated with leveraging COFs for biomedical applications. This review paper aims to contribute to the scientific community's understanding of the immense potential of COFs in improving drug delivery systems and enhancing the performance of biosensors in biomedical applications.

Sensors for Emerging Water Contaminants: Overcoming Roadblocks to Innovation.

Ensuring water quality and safety requires the effective detection of emerging contaminants, which present significant risks to both human health and the environment. Field deployable low-cost sensors provide solutions to detect contaminants at their source and enable large-scale water quality monitoring and management. Unfortunately, the availability and utilization of such sensors remain limited. This Perspective examines current sensing technologies for detecting emerging contaminants and analyzes critical barriers, such as high costs, lack of reliability, difficulties in implementation in real-world settings, and lack of stakeholder involvement in sensor design. These technical and nontechnical barriers severely hinder progression from proof-of-concepts and negatively impact user experience factors such as ease-of-use and actionability using sensing data, ultimately affecting successful translation and widespread adoption of these technologies. We provide examples of specific sensing systems and explore key strategies to address the remaining scientific challenges that must be overcome to translate these technologies into the field such as improving sensitivity, selectivity, robustness, and performance in real-world water environments. Other critical aspects such as tailoring research to meet end-users' requirements, integrating cost considerations and consumer needs into the early prototype design, establishing standardized evaluation and validation protocols, fostering academia-industry collaborations, maximizing data value by establishing data sharing initiatives, and promoting workforce development are also discussed. The Perspective describes a set of guidelines for the development, translation, and implementation of water quality sensors to swiftly and accurately detect, analyze, track, and manage contamination.

Real-time monitoring of cellular superoxide anion release in THP-1 cells using a catalytically amplified superoxide dismutase-based microbiosensor.

Reactive oxygen species (ROS) including the superoxide anion (O2•-) are typically studied in cell cultures using fluorescent dyes, which provide only discrete single-point measurements. These methods lack the capabilities for assessing O2•- kinetics and release in a quantitative manner over long monitoring times. Herein, we present the fabrication and application of an electrochemical biosensor that enables real-time continuous monitoring of O2•- release in cell cultures for extended periods (> 8 h) using an O2•- specific microelectrode. To achieve the sensitivity and selectivity requirements for cellular sensing, we developed a biohybrid system consisting of superoxide dismutase (SOD) and Ti3C2Tx MXenes, deposited on a gold microwire electrode (AuME) as O2•- specific materials with catalytic amplification through the synergistic action of the enzyme and the biomimetic MXenes-based structure. The biosensor demonstrated a sensitivity of 18.35 nA/µM with a linear range from 147 to 930 nM in a cell culture medium. To demonstrate its robustness and practicality, we applied the biosensor to monitor O2•- levels in human leukemia monocytic THP-1 cells upon stimulation with lipopolysaccharide (LPS). Using this strategy, we successfully monitored LPS-induced O2•- in THP-1 cells, as well as the quenching effect induced by the ROS scavenger N-acetyl-L-cysteine (NAC). The biosensor is generally useful for exploring the role of oxidative stress and longitudinally monitoring O2•- release in cell cultures, enabling studies of biochemical processes and associated oxidative stress mechanisms in cellular and other biological environments.

Physiological and Molecular Modulations to Drought Stress in the Brassica Species.

Climate change, particularly drought stress, significantly impacts plant growth and development, necessitating the development of resilient crops. This study investigated physiological and molecular modulations to drought stress between diploid parent species and their polyploid progeny in the Brassica species. While no significant phenotypic differences were observed among the six species, drought stress reduced growth parameters by 2.4% and increased oxidative stress markers by 1.4-fold. Drought also triggered the expression of genes related to stress responses and led to the accumulation of specific metabolites. We also conducted the first study of perfluorooctane sulfonic acid (PFOS) levels in leaves as a drought indicator. Lower levels of PFOS accumulation were linked to plants taking in less water under drought conditions. Both diploid and polyploid species responded to drought stress similarly, but there was a wide range of variation in their responses. In particular, responses were less variable in polyploid species than in diploid species. This suggests that their additional genomic components acquired through polyploidy may improve their flexibility to modulate stress responses. Despite the hybrid vigor common in polyploid species, Brassica polyploids demonstrated intermediate responses to drought stress. Overall, this study lays the framework for future omics-level research, including transcriptome and proteomic studies, to deepen our understanding of drought tolerance mechanisms in Brassica species.

Tuning the Fluorometric Sensing of Phosphate on UiO-66-NH2(Zr, Ce, Hf) Metal Nodes.

Metal-organic frameworks (MOFs) with intrinsic luminescent properties, modular structure, and tunable electronic properties, provide unique opportunities for designing target-specific molecular sensors by systematically choosing their constituent building blocks. We report a simple one-step MOF-based sensing platform for phosphate (P) detection that combines the luminescent properties of 2-aminoterephthalic acid (ATA) with the affinity of rationally selected nodes in UiO-66-NH2 to bind with P. This MOF possesses an electron-donating amine group that controls the light-harvesting characteristics of the linkers. Substituting Zr6 node with Ce6 or Hf6 results in a series of isostructural MOFs with distinct optical properties that are nonexistent in the unsubstituted MOF. We have utilized these MOFs to quantitatively measure P, using its ability to bind strongly to metal nodes inhibiting the LMCT process and altering the linker's photon emission. Using this system, detection limits of 4.5, 7.2 and 10.5 µM were obtained for the UiO-66-NH2(Ce), UiO-66-NH2, and UiO-66-NH2(Hf) respectively, adopting a straightforward single step procedure. These results demonstrate that the selection of metal nodes in a series of isostructural MOFs can be used to modulate their electronic properties and create sensing probes possessing the desired characteristics needed for the detection of environmental contaminants.

Nanoelectrochemistry Reveals Selective Interactions of Perfluoroalkyl Substances (PFASs) with Silver Nanoparticles.

Nanoelectrochemistry allows for the investigation of the interaction of per- and polyfluoroalkyl substances (PFASs) with silver nanoparticles (AgNPs) and the elucidation of the binding behaviour of PFASs to nanoscale surfaces with high sensitivity. Mechanistic studies supported by single particle collision electrochemistry (SPCE), spectroscopic and density functional theory (DFT) calculations indicate the capability of polyfluorooctane sulfonic acid (PFOS), a representative PFAS, to selectively bind and induce aggregation of AgNPs. Single-particle measurements provide identification of the "discrete" AgNPs agglomeration (e.g. 2-3 NPs) formed through the inter-particles F-F interactions and the selective replacement of the citrate stabilizer by the sulfonate of the PFOS. Such interactions are characteristic only for long chain PFAS (-SO3 - ) providing a means to selectively identify these substances down to ppt levels. Measuring and understanding the interactions of PFAS at nanoscale surfaces are crucial for designing ultrasensitive methods for detection and for modelling and predicting their interaction in the environment.

Collision-Based Electrochemical Detection of Lysozyme Aggregation.

Proteins are utilized across many biomedical and pharmaceutical industries; therefore, methods for rapid and accurate monitoring of protein aggregation are needed to ensure proper product quality. Although these processes have been previously studied, it is difficult to comprehensively evaluate protein folding and aggregation by traditional characterization techniques such as atomic force microscopy (AFM), electron microscopy, or X-ray diffraction, which require sample pre-treatment and do not represent native state proteins in solution. Herein, we report early tracking of lysozyme (Lyz) aggregation states by using single-particle collision electrochemistry (SPCE) of silver nanoparticle (AgNP) redox probes. The method relies on monitoring the rapid interaction of Lyz with AgNPs, which decreases the number of single AgNPs available for collisions and ultimately the frequency of oxidative impacts in the chronoamperometric profile. When Lyz is in a non-aggregated monomeric form, the protein forms a homogeneous coverage onto the surface of AgNPs, stabilizing the particles. When Lyz is aggregated, part of the AgNP surface remains uncoated, promoting the agglomeration of Lyz-AgNP conjugates. The frequency of AgNP impacts decreases with increasing aggregation time, providing a metric to track protein aggregation. Visualizations of integrated oxidation charge-transfer data displayed significant differences between the charge transfer per impact for AgNP samples alone and in the presence of non-aggregated and aggregated Lyz with 99% confidence using parametric ANOVA tests. Electrochemical results revealed meaningful associations with UV-vis, circular dichroism, and AFM, demonstrating that SPCE can be used as an alternative method for studying protein aggregation. This electrochemical technique could serve as a powerful tool to indirectly evaluate protein stability and screen protein samples for formation of aggregates.

Microbial Electrochemical Systems: Principles, Construction and Biosensing Applications.

Microbial electrochemical systems are a fast emerging technology that use microorganisms to harvest the chemical energy from bioorganic materials to produce electrical power. Due to their flexibility and the wide variety of materials that can be used as a source, these devices show promise for applications in many fields including energy, environment and sensing. Microbial electrochemical systems rely on the integration of microbial cells, bioelectrochemistry, material science and electrochemical technologies to achieve effective conversion of the chemical energy stored in organic materials into electrical power. Therefore, the interaction between microorganisms and electrodes and their operation at physiological important potentials are critical for their development. This article provides an overview of the principles and applications of microbial electrochemical systems, their development status and potential for implementation in the biosensing field. It also provides a discussion of the recent developments in the selection of electrode materials to improve electron transfer using nanomaterials along with challenges for achieving practical implementation, and examples of applications in the biosensing field.

Addressing the Selectivity of Enzyme Biosensors: Solutions and Perspectives.

Enzymatic biosensors enjoy commercial success and are the subject of continued research efforts to widen their range of practical application. For these biosensors to reach their full potential, their selectivity challenges need to be addressed by comprehensive, solid approaches. This review discusses the status of enzymatic biosensors in achieving accurate and selective measurements via direct biocatalytic and inhibition-based detection, with a focus on electrochemical enzyme biosensors. Examples of practical solutions for tackling the activity and selectivity problems and preventing interferences from co-existing electroactive compounds in the samples are provided such as the use of permselective membranes, sentinel sensors and coupled multi-enzyme systems. The effect of activators, inhibitors or enzymatic substrates are also addressed by coupled enzymatic reactions and multi-sensor arrays combined with data interpretation via chemometrics. In addition to these more traditional approaches, the review discusses some ingenious recent approaches, detailing also on possible solutions involving the use of nanomaterials to ensuring the biosensors' selectivity. Overall, the examples presented illustrate the various tools available when developing enzyme biosensors for new applications and stress the necessity to more comprehensively investigate their selectivity and validate the biosensors versus standard analytical methods.

Two-Dimensional Nanostructures for Electrochemical Biosensor.

Current advancements in the development of functional nanomaterials and precisely designed nanostructures have created new opportunities for the fabrication of practical biosensors for field analysis. Two-dimensional (2D) and three-dimensional (3D) nanomaterials provide unique hierarchical structures, high surface area, and layered configurations with multiple length scales and porosity, and the possibility to create functionalities for targeted recognition at their surface. Such hierarchical structures offer prospects to tune the characteristics of materials-e.g., the electronic properties, performance, and mechanical flexibility-and they provide additional functions such as structural color, organized morphological features, and the ability to recognize and respond to external stimuli. Combining these unique features of the different types of nanostructures and using them as support for bimolecular assemblies can provide biosensing platforms with targeted recognition and transduction properties, and increased robustness, sensitivity, and selectivity for detection of a variety of analytes that can positively impact many fields. Herein, we first provide an overview of the recently developed 2D nanostructures focusing on the characteristics that are most relevant for the design of practical biosensors. Then, we discuss the integration of these materials with bio-elements such as bacteriophages, antibodies, nucleic acids, enzymes, and proteins, and we provide examples of applications in the environmental, food, and clinical fields. We conclude with a discussion of the manufacturing challenges of these devices and opportunities for the future development and exploration of these nanomaterials to design field-deployable biosensors.

Lethality of MalE-LacZ hybrid protein shares mechanistic attributes with oxidative component of antibiotic lethality.

Downstream metabolic events can contribute to the lethality of drugs or agents that interact with a primary cellular target. In bacteria, the production of reactive oxygen species (ROS) has been associated with the lethal effects of a variety of stresses including bactericidal antibiotics, but the relative contribution of this oxidative component to cell death depends on a variety of factors. Experimental evidence has suggested that unresolvable DNA problems caused by incorporation of oxidized nucleotides into nascent DNA followed by incomplete base excision repair contribute to the ROS-dependent component of antibiotic lethality. Expression of the chimeric periplasmic-cytoplasmic MalE-LacZ72-47 protein is an historically important lethal stress originally identified during seminal genetic experiments that defined the SecY-dependent protein translocation system. Multiple, independent lines of evidence presented here indicate that the predominant mechanism for MalE-LacZ lethality shares attributes with the ROS-dependent component of antibiotic lethality. MalE-LacZ lethality requires molecular oxygen, and its expression induces ROS production. The increased susceptibility of mutants sensitive to oxidative stress to MalE-LacZ lethality indicates that ROS contribute causally to cell death rather than simply being produced by dying cells. Observations that support the proposed mechanism of cell death include MalE-LacZ expression being bacteriostatic rather than bactericidal in cells that overexpress MutT, a nucleotide sanitizer that hydrolyzes 8-oxo-dGTP to the monophosphate, or that lack MutM and MutY, DNA glycosylases that process base pairs involving 8-oxo-dGTP. Our studies suggest stress-induced physiological changes that favor this mode of ROS-dependent death.

MXenes-Based Bioanalytical Sensors: Design, Characterization, and Applications.

MXenes are recently developed 2D layered nanomaterials that provide unique capabilities for bioanalytical applications. These include high metallic conductivity, large surface area, hydrophilicity, high ion transport properties, low diffusion barrier, biocompatibility, and ease of surface functionalization. MXenes are composed of transition metal carbides, nitrides, or carbonitrides and have a general formula Mn+1Xn, where M is an early transition metal while X is carbon and/or nitrogen. Due to their unique features, MXenes have attracted significant attention in fields such as clean energy production, electronics, fuel cells, supercapacitors, and catalysis. Their composition and layered structure make MXenes attractive for biosensing applications. The high conductivity allows these materials to be used in the design of electrochemical biosensors and the multilayered configuration makes them an efficient immobilization matrix for the retention of activity of the immobilized biomolecules. These properties are applicable to many biosensing systems and applications. This review describes the progress made on the use and application of MXenes in the development of electrochemical and optical biosensors and highlights future needs and opportunities in this field. In particular, opportunities for developing wearable sensors and systems with integrated biomolecule recognition are highlighted.

Easy-to-Use Sensors for Field Monitoring of Copper Contamination in Water and Pesticide-Sprayed Plants.

Copper (Cu2+)-containing pesticides are commonly used in agriculture to control fungal and bacterial diseases, but the release of large quantities of Cu2+ in water and soil can lead to harmful long-term consequences on the environment, organisms, and ecosystem health. Technology available to measure Cu2+ accumulation in the field is too expensive and complicated for general population use. We describe a low-cost sensor with simplified user operation for measuring Cu2+ content in environmental and agricultural samples at sensitivity levels comparable with a laboratory-based atomic absorption spectroscopy (AAS) method. The sensor is based on polyethyeleneimine (PEI), which has a strong chelating ability for Cu2+ ions. The PEI is stabilized on paper by layer-by-layer assembly with the PEI deposited sequentially within electrostatically charged poly(styrenesulfonate) (PSS). The PEI-PSS layers develop a vivid blue complex when interacting with Cu2+, and the resulting color intensity varies with the Cu2+ concentration. Our sensors give a yes or no response with the naked eye down to 10 µM when a preconcentration step was used. A more precise quantitative response can be obtained using a smartphone or scanner and free imaging software within a wide linear range from 10 to 2000 µM with a detection limit of 0.795 µM. The sensors were used for detecting commercial Cu2+-based pesticides in water and pesticide-sprayed plants within 15 min. Considering that these sensors are robust, simple to operate, and extremely stable, they could be ideal for remote monitoring of Cu2+ ion exposure and for the analysis of Cu2+ in environmental water and agricultural fields.

Real time electrochemical investigation of the release, distribution and modulation of nitric oxide in the intestine of individual zebrafish embryos.

Nitric oxide (NO) is an important signaling molecule that has been implicated in a variety of physiological and pathophysiological processes in living organisms. NO plays an important role in embryonic development in vertebrates and has been reported to influence early organ development and plasticity. Quantifying NO in single embryos and their developing organs is challenging because of the small size of the embryos, the low dynamically changing concentration and the short life-time of NO. Here, we measured the distribution of NO in the intestine of live zebrafish (Danio rerio) embryos in physiological conditions and under the influence of therapeutic agents. NO measurements were performed using a miniaturized electrochemical sensor fabricated on a single carbon fiber (CF) which enables quantitative real time in vivo monitoring, and by fluorescence imaging using the 4-amino-5-methylamino-2',7'-difluorofluorescein diacetate (DAF-FM-DA) dye. NO production was detected in the middle segment the intestine at a level of 3.78 (±0.64) µM, and at lower levels in the anterior and posterior segments, 1.08 (±0.22) and 1.00 (±0.41) µM respectively. In the presence of resveratrol and rosuvastatin, the intestinal NO concentration decreased by 87% and 84%, demonstrating a downregulating effect. These results indicate the presence of variable micromolar concentrations of NO along the intestine of zebrafish embryos and demonstrate the usefulness of CF microelectrodes to measure quantitatively the NO release at the level of a single organ in individual zebrafish embryos. This work provides a unique approach to study in real time the modulatory role of NO in vivo and contributes to further understanding of the molecular basis of embryonic development for developmental biology and drug screening applications.

Multifunctional Nanotechnology-Enabled Sensors for Rapid Capture and Detection of Pathogens.

Nanomaterial-based sensing approaches that incorporate different types of nanoparticles (NPs) and nanostructures in conjunction with natural or synthetic receptors as molecular recognition elements provide opportunities for the design of sensitive and selective assays for rapid detection of contaminants. This review summarizes recent advancements over the past ten years in the development of nanotechnology-enabled sensors and systems for capture and detection of pathogens. The most common types of nanostructures and NPs, their modification with receptor molecules and integration to produce viable sensing systems with biorecognition, amplification and signal readout are discussed. Examples of all-in-one systems that combine multifunctional properties for capture, separation, inactivation and detection are also provided. Current trends in the development of low-cost instrumentation for rapid assessment of food contamination are discussed as well as challenges for practical implementation and directions for future research.

Platinum-doped ceria based biosensor for in vitro and in vivo monitoring of lactate during hypoxia.

Measurements of lactate concentrations in blood and tissues are an important indication of the adequacy of tissue oxygenation and could be useful for monitoring the state and progress of a variety of diseases. This paper describes the fabrication, analytical characterization, and physiological application of an amperometric microbiosensor based on lactate oxidase and oxygen-rich platinum doped ceria (Pt-ceria) nanoparticles for monitoring lactate levels during hypoxic conditions. The Pt-ceria nanoparticles provided electrocatalytic amplification for the detection of the enzymatically produced hydrogen peroxide and acted as an internal oxygen source for the enzyme, enabling lactate monitoring in an oxygen depleted tissue. In vitro evaluation of the biosensor demonstrated high selectivity against physiological levels of ascorbic acid, a storage stability of 3 weeks, a fast response time of 6 s, and good, linear sensitivity over a wide concentration range. In vivo experiments performed by placing the biosensor in the hippocampus of anesthetized rats demonstrated the feasibility of continuous lactate monitoring over 2 h ischemia and reperfusion. The results demonstrate that Pt-ceria is a versatile material for use in implantable enzyme bioelectrodes, which may be used to assess the pathophysiology of tissue hypoxia. In addition to measurements in hypoxic conditions, the detection limit of this biosensor was low, 100 pM, and the materials used to fabricate this biosensor can be particularly useful in ultrasensitive devices for monitoring lactate levels in a variety of conditions.

Portable Colorimetric Paper-Based Biosensing Device for the Assessment of Bisphenol A in Indoor Dust.

Bisphenol A (BPA) is found in polycarbonate plastic and epoxy resins and is used in a variety of commercial and consumer products. The leaching of BPA can result in human exposure via inhalation, ingestion, and dermal routes. As a result, humans have been exposed in their home and work environment to BPA. Conventional methods for BPA exposure assessment rely on cumbersome laboratory instrumentation with high capital and operational expenditures which limit the number of samples that can be analyzed. We report here the design of a compact portable colorimetric paper-based biosensing device with integrated sampling/analysis units for field-based measurements of BPA in indoor dust. The system employs interchangeable low-cost paper-based enzyme sensors as a test zone for BPA detection interfaced with an air-sampling cassette as a sample collection area. The sensor response was concentration-dependent with a detection limit of 0.28 µg/g. The sensor was validated with the conventional gas chromatography method and used to detect BPA exposure in household dust. BPA concentrations ranged from 0.05 to 3.87 µg/g in 57 household dust samples when both methods were used. The potential of this method for field measurements of dust samples is discussed.

Portable Nanoparticle-Based Sensors for Food Safety Assessment.

The use of nanotechnology-derived products in the development of sensors and analytical measurement methodologies has increased significantly over the past decade. Nano-based sensing approaches include the use of nanoparticles (NPs) and nanostructures to enhance sensitivity and selectivity, design new detection schemes, improve sample preparation and increase portability. This review summarizes recent advancements in the design and development of NP-based sensors for assessing food safety. The most common types of NPs used to fabricate sensors for detection of food contaminants are discussed. Selected examples of NP-based detection schemes with colorimetric and electrochemical detection are provided with focus on sensors for the detection of chemical and biological contaminants including pesticides, heavy metals, bacterial pathogens and natural toxins. Current trends in the development of low-cost portable NP-based technology for rapid assessment of food safety as well as challenges for practical implementation and future research directions are discussed.