The Nanoplasmonic Purcell Effect in Ultrafast and High-Light-Yield Perovskite Scintillators.

The development of X-ray scintillators with ultrahigh light yields and ultrafast response times is a long sought-after goal. In this work, a fundamental mechanism that pushes the frontiers of ultrafast X-ray scintillator performance is theoretically predicted and experimentally demonstrated: the use of nanoscale-confined surface plasmon polariton modes to tailor the scintillator response time via the Purcell effect. By incorporating nanoplasmonic materials in scintillator devices, this work predicts over tenfold enhancement in decay rate and 38% reduction in time resolution even with only a simple planar design. The nanoplasmonic Purcell effect is experimentally demonstrated using perovskite scintillators, enhancing the light yield by over 120% to 88 ± 11 ph/keV, and the decay rate by over 60% to 2.0 ± 0.2 ns for the average decay time, and 0.7 ± 0.1 ns for the ultrafast decay component, in good agreement with the predictions of our theoretical framework. Proof-of-concept X-ray imaging experiments are performed using nanoplasmonic scintillators, demonstrating 182% enhancement in the modulation transfer function at four line pairs per millimeter spatial frequency. This work highlights the enormous potential of nanoplasmonics in optimizing ultrafast scintillator devices for applications including time-of-flight X-ray imaging and photon-counting computed tomography.

Highly NH3 Sensitive and Selective Ti3C2O2-Based Gas Sensors: A Density Functional Theory-NEGF Study.

Ammonia (NH3) detection at the early stage is an important precaution for human health and agricultural production. However, conventional sensing materials are difficult to achieve all the targeted operational performances such as low power consumption and high selectivity. MXenes are a type of graphene-like emergent material equipped with abundant surface sites benefiting gas-sensing applications. In the work, we discuss the sensing performance of Ti3C2O2 to anticipate harmful and polluting NH3 gases by density functional theory and nonequilibrium Green's function. The adsorption geometry, charge difference density, and partial density of states are discussed to understand the nature of interactions between gas molecules and Ti3C2O2. The theoretical results show that only NH3 adsorbs onto the nanosheet through chemisorption. Then, a two-electrode Ti3C2O2-based gas sensor device is built to unravel the transport properties. Current under different bias voltages indicates the Ti3C2O2-based sensor could maintain extremely high sensitivity, demonstrating that Ti3C2O2 has great potential for the NH3 sensor with high selectivity, excellent sensitivity, and low energy consumption. Upon external electric fields, the adsorption energy and charge transfer can be tuned effectively, suggesting that Ti3C2O2 is a versatile agent as an ammonia-sensing material.

Recent advances of modification effect in Co3O4-based catalyst towards highly efficient photocatalysis.

Tricobalt tetroxide (Co3O4) has been developed as a promising photocatalyst material for various applications. Several reports have been published on the self-modification of Co3O4 to achieve optimal photocatalytic performance. The pristine Co3O4 alone is inadequate for photocatalysis due to the rapid recombination process of photogenerated (PG) charge carriers. The modification of Co3O4 can be extended through the introduction of doping elements, incorporation of supporting materials, surface functionalization, metal loading, and combination with other photocatalysts. The addition of doping elements and support materials may enhance the photocatalysis process, although these modifications have a slight effect on decreasing the recombination process of PG charge carriers. On the other hand, combining Co3O4 with other semiconductors results in a different PG charge carrier mechanism, leading to a decrease in the recombination process and an increase in photocatalytic activity. Therefore, this work discusses recent modifications of Co3O4 and their effects on its photocatalytic performance. Additionally, the modification effects, such as enhanced surface area, generation of oxygen vacancies, tuning the band gap, and formation of heterojunctions, are reviewed to demonstrate the feasibility of separating PG charge carriers. Finally, the formation and mechanism of these modification effects are also reviewed based on theoretical and experimental approaches to validate their formation and the transfer process of charge carriers.

The deformation of short-range order leading to rearrangement of topological network structure in zeolitic imidazolate framework glasses.

In recent years, the study of the glassy structure of zeolitic imidazolate frameworks (ZIFs) has been a key breakthrough in glass science. Yet the theoretical understanding of the structure of these complex materials is still in its infancy, especially the short-range structure. The short-structural disorder of two ZIFs and their corresponding molten structure, namely, ZIF-4 and ZIF-62 are studied, using ab initio simulations. Changes in short-range order are investigated, particularly the changes in bond length, bond angle, and tetrahedral unit volume. Furthermore, the asymmetric distribution of organic groups caused by the benzimidazole functional group leads to the difference in short-range disorder between ZIF-4 and ZIF-62 glasses, which contribute to the glass-forming ability difference.

Shedding light on the energy applications of emerging 2D hybrid organic-inorganic halide perovskites.

Unique performance of the hybrid organic-inorganic halide perovskites (HOIPs) has attracted great attention because of their continuous exploration and breakthrough in a multitude of energy-related applications. However, the instability and lead-induced toxicity that arise in bulk perovskites are the two major challenges that impede their future commercialization process. To find a solution, a series of two-dimensional HOIPs (2D HOIPs) are investigated to prolong the device lifetime with highly efficient photoelectric conversion and energy storage. Herein, the recent advances of 2D HOIPs and their structural derivatives for the energy realms are summarized and discussed. The basic understanding of crystal structures, physicochemical properties, and growth mechanisms is presented. In addition, the current challenges and future directions to provide a roadmap for the development of next generation 2D HOIPs are prospected.

Selective self-assembly of 2,3-diaminophenazine molecules on MoSe2 mirror twin boundaries.

The control of the density and type of line defects on two-dimensional (2D) materials enable the development of new methods to tailor their physical and chemical properties. In particular, mirror twin boundaries (MTBs) on transition metal dichacogenides have attracted much interest due to their metallic state with charge density wave transition and spin-charge separation property. In this work, we demonstrate the self-assembly of 2,3-diaminophenazine (DAP) molecule porous structure with alternate L-type and T-type aggregated configurations on the MoSe2 hexagonal wagon-wheel pattern surface. This site-specific molecular self-assembly is attributed to the more chemically reactive metallic MTBs compared to the pristine semiconducting MoSe2 domains. First-principles calculations reveal that the active MTBs couple with amino groups in the DAP molecules facilitating the DAP assembly. Our results demonstrate the site-dependent electronic and chemical properties of MoSe2 monolayers, which can be exploited as a natural template to create ordered nanostructures.