Does YouTubeTM Offer High-Quality Information About Nasoalveolar Molding?

OBJECTIVE: To assess the content and quality of YouTubeTM videos concerning nasoalveolar molding (NAM). DESIGN: YouTubeTM was searched for videos containing information relevant to NAM with the 2 keywords "nasoalveolar molding," and "presurgical infant orthopedics." A total of 24 out of 51 videos were found to be applicable to this study and rated for quality using the Global Quality Scale (GQS). To determine whether the contents of the selected 24 videos were useful or not, a content usefulness index consisting of 8 parameters was created. The videos were classified according to the usefulness index as low or high content videos. Spearman rank correlation analysis, Kolmogorov-Smirnov, Shapiro-Wilk, and Mann-Whitney U-tests were used for statistical analysis. RESULTS: The mean GQS score of the 24 YouTubeTM videos on NAM was 2.3 ± 0.8, indicating overall poor quality. In terms of information, videos with high content (29.2%) were less in number than low content videos (70.8%). GQS values were found to be significantly higher in the high content group (P < .01). Regarding the source, video, and audio quality values were significantly higher in the expert group compared to the caregiver group (P < .01), whereas the usefulness index did not differ between groups (P > .05). A significant relationship was found between GQS and usefulness index, audio quality, and video quality (P < .001). CONCLUSIONS: YouTube™ videos on NAM were generally inadequate in their content information and poor in quality. Expert videos, showing better audiovisual quality and flow compared to non-expert videos, did not offer higher quality information about NAM considering the usefulness index.

Evaluation of the Quality and Reliability of YouTubeTM Videos Created by Orthodontists as an Information Source for Clear Aligners.

Objective: This study aimed to evaluate the quality, reliability, and content usefulness of videos created by orthodontists on clear orthodontic aligners. Methods: Videos were screened using YouTubeTM by conducting a search for "Invisalign". After a preliminary evaluation of the first 250 results, 61 videos that met the selection criteria were scored and their length, days since upload, and numbers of views, likes, dislikes, and comments were recorded. These data were used to calculate the interaction index and viewing rate. Video reliability was assessed using a five-item modified DISCERN index, and video quality was assessed using the Video Information and Quality Index. A 10-item content usefulness index was created to determine the usefulness of the video content. Descriptive statistics of the parameters were calculated, and correlation coefficients were calculated to evaluate the relationships between the parameters. Results: The mean reliability score was 2.75±1.02 (out of 5), and the total quality score was 11.80±3.38 (out of 20). The total content usefulness index was quite low, with a mean score of 2.52±2.14 (out of 10). Interaction index and viewing rate were positively correlated with reliability score (r=0.463, p<0.01; r=0.295, p<0.05) and total quality score (r=0.365, p<0.01; r=0.295, p<0.01, respectively). The reliability score was positively correlated with the total quality score (r=0.842, p<0.01) and total content usefulness index (r=0.346, p<0.01). Conclusion: Videos about orthodontic aligner treatment have average reliability and quality but largely insufficient content.

Validation of a Finite Element Model for Clinical and Virtual Evaluation of the Changes in Airway Dimensions Following Class III Bimaxillary Orthognathic Surgery.

Introduction: The aim of this study was to evaluate pharyngeal airway changes in adult skeletal Class III cases whose bimaxillary surgical treatments were planned with different amounts of maxillary and mandibular movement using lateral cephalometric radiographs and finite element analysis (FEA). Our null hypothesis was that bimaxillary orthognathic surgery in which maxillary forward movement (MF) is greater than mandibular backward movement (MB) will result in more expansion of the pharyngeal airway. Materials and Methods: A total of 31 individuals (11 females, 20 males) with class III skeletal deformity were included in the study. Patients who underwent bimaxillary orthognathic surgery with greater maxillary advancement (MF > MB) were categorized in Group 1 (n = 15), and those with greater mandibular set-back (MB > MF) as Group 2 (n = 16). Changes in airway dimensions were evaluated from lateral cephalometric radiographs. In addition, FEA modeling was used to determine pharyngeal airway changes with 5 different MF/MB combinations performed in skeletal class III bimaxillary surgeries. Results: Nasopharyngeal and oropharyngeal airway dimensions increased in direct proportion to the amount of MF. Hypopharyngeal volume decreased compared to preoperative value in direct proportion to the decrease in MB. According to the FEA models, total pharyngeal airway volume decreased when MF was less than or equal to MB, was nearly unchanged when MF was 2 mm greater than MB, and increased when MF was 4 mm greater than MB. The results of FEA and lateral cephalometric analysis were compatible. Conclusion: Our results supported the null hypothesis. We concluded that when possible, planning slightly more maxillary advancement than mandibular set-back will not have an adverse impact on the airway. Although the skeletal deformity only causes forward displacement of the mandible, dividing the skeletal correction between the maxilla and mandible may be considered to avoid the risk to patients' quality of life in terms of respiratory function.

Effect of different resin removal methods on enamel after metal and ceramic bracket debonding : An in vitro micro-computed tomography study.

PURPOSE: The aim of this study was to conduct an in vitro evaluation of the effects of different adhesive debonding and polishing techniques performed after metal and ceramic bracket removal on enamel using micro-computed tomography (micro-CT). METHODS: This study was performed on 42 extracted maxillary first premolars divided into 2 main groups and 6 subgroups as follows: metal (group 1) or ceramic (group 2) brackets were bonded to the teeth, then, after debonding, one of three different methods was used to remove the residual adhesive: tungsten carbide burs with pumice (A), fiber-reinforced composite burs and polishing paste (B), or Sof-Lex discs (C; 3M Dental, St Paul, MN, USA). The samples were evaluated by micro-CT before bracket bonding (T0) and after resin removal (T1). Demineralization area, demineralization depth, demineralization volume, mineral density, and mineral volume were measured. RESULTS: At T1, demineralization area was significantly larger in groups 1A and 2A compared to groups 1B, 1C, 2B, and 2C (P = 0.001). Group 2A (ceramic bracket/tungsten carbide-pumice) had the highest demineralization volume (P = 0.001). When the groups were compared in terms of change from T0 to T1, groups 1A and 2A showed significantly larger changes in demineralization area compared to the other 4 groups (P = 0.001). The increase in demineralization volume was larger in group 2A compared to all other groups (P = 0.001). CONCLUSION: All resin removal methods damaged the enamel surface to varying degrees. Regardless of bracket type, the use of tungsten carbide and pumice should be avoided when cleaning the tooth surface after debonding. Use of composite burs and Sof-Lex discs in particular after the debonding of ceramic brackets will help minimize damage.

Evaluation of Dental Age in Individuals of Different Ages with Unilateral Cleft Lip and Palate.

OBJECTIVE: This study aimed to evaluate the dental age of unilateral cleft lip and palate (UCLP) patients aged 7-12 and 12-16 years using Demirjian's method and to compare these results with a control group. METHODS: We evaluated the panoramic radiographs of 54 individuals with UCLP and 54 age- and gender-matched individuals without UCLP (control). The UCLP and control groups were divided into two groups: 7-12 and 12-16 years of age. Their dental ages were determined using Demirjian's method. Dental ages of the cleft side and noncleft side were assessed separately and were also compared with those of the control group to assess potential asymmetric dental developments in the UCLP group. RESULTS: The chronological age was lower than the dental ages on both right and left sides in the control group (p<0.01). When age groups were evaluated separately, it was found that the chronological age was lower than the dental age in 7-12 year old individuals in the UCLP group (p<0.05), whereas it was less than the left and right dental ages in 7-12 (p<0.01) and 12-16 year old individuals (p<0.05) in the control group. CONCLUSION: We detected no differences in dental age between UCLP patients and healthy controls, and lack of asymmetrical dental development in the mandibular teeth of either group. However, based on assessments performed using Demirjian's method, subjects' dental and chronological ages were incompatible.

Evaluating the effects of functional orthodontic treatment on mandibular osseous structure using fractal dimension analysis of dental panoramic radiographs.

OBJECTIVE: To evaluate the effects of functional appliance treatment on mandibular trabecular structure using fractal dimension (FD) analysis of dental panoramic radiographs. MATERIALS AND METHODS: This study was conducted using digital panoramic radiographs of 45 patients with Class II malocclusion treated with functional appliances (treatment group, mean age: 11.39 ± 0.97 years; 23 girls, 22 boys) acquired before (T0) and after (T1) treatment and the panoramic radiographs of 45 control subjects who had undergone no orthodontic treatment (control group, mean age: 11.31 ± 0.87 years; 23 girls, 22 boys). FD values in the condylar process, mandibular corpus, and mandibular angle were analyzed from the panoramic radiographs of both groups. RESULTS: Analysis of changes in FD between T0 and T1 revealed significant increases in the FD values of the right and left condylar processes and right mandibular corpus in the treatment group (P < .001) and in the right condylar process in the control group (P < .05). Between-group comparisons demonstrated that the treatment group showed greater changes in the condylar process (right, P < .001; left, P < .05) and right mandibular corpus (P < .05) compared to controls. Correlation analysis between the cephalometric and FD changes in the treatment group showed the right condylar process changes were negatively correlated with GoGn/SN angle (P < .05) and positively correlated with Co-Go (P < .05), although these correlations were weak. CONCLUSIONS: FD analysis demonstrated significant changes in trabeculation of the condyle and mandibular corpus in the treatment group compared to the control group. Functional appliance treatment may lead to skeletal correction by altering skeletal form and trabeculation of the mandibular bone.

Comparison of the Accuracy of Manual and Digital Cephalometric Prediction Methods in Orthognathic Surgical Planning: A Pilot Study.

OBJECTIVE: To compare and evaluate the reliability of manual and digital cephalometric prediction methods in orthognathic surgical planning. METHODS: Ten adults (5 females and 5 males) with skeletal class III malocclusion were included. The mean patient age was 21.97 years. Pre- to postoperative changes were evaluated using paired t-test. Manual surgical predictions made by tracing on acetate paper and digital predictions made using computer software were compared with actual postoperative values using intraclass correlation coefficient and root mean square. RESULTS: Statistically significant changes were observed in SNA, SNB, ANB, U1i-FH, and Nperp-A following bimaxillary orthognathic surgery (p<0.001). Postoperative changes in Co-A and Nperp-Pg were statistically significant (p<0.05). Comparison of manual and digital surgical predictions with actual postoperative values revealed that overbite and overjet showed the lowest agreements. Manual predictions were less accurate for points that were difficult to distinguish (Co and U6). Skeletal predictions were more accurate than dental predictions. CONCLUSION: Parameters with low reproducibility (Co and U6) decrease the reliability of predictions. Dental predictions were inaccurate in both methods due to the effects of intermaxillary elastics, but both methods yielded similar predictions for skeletal parameters. The impact of applying strong elastics for postoperative intermaxillary fixation should be considered when making surgical predictions.