RESUMO
At the beginning of the COVID-19 outbreak (end 2019 - 2020), therapeutic treatments based on approved drugs have been the fastest approaches to combat the new coronavirus pandemic. Nowadays several vaccines are available. However, the worldwide vaccination program is going to take a long time and its success will depend on the vaccine public's acceptance. Therefore, outside of vaccination, the repurposing of existing antiviral, anti-inflammatory and other types of drugs, have been considered an alternative medical strategy for the COVI-19 infection. Due to the broad clinical potential of the drugs, but also to their possible side effects, analytical methods are needed to monitor the drug concentrations in biological fluids and pharmaceutical products. This review deals with analytical methods developed in the period 2015 - July 2021 to detect potential drugs that, according to a literature survey, have been taken into consideration for the treatment of COVID-19. The drugs considered here have been selected on the basis of the number of articles published in the period January 2020-July 2021, using the combination of the keywords: COVID-19 and drugs or SARS-CoV-2 and drugs. A section is also devoted to monoclonal antibodies. Over the period considered, the analytical methods have been employed in a variety of real samples, such as body fluids (plasma, blood and urine), pharmaceutical products, environmental matrices and food.
Assuntos
COVID-19 , Humanos , SARS-CoV-2 , Preparações FarmacêuticasRESUMO
An authentication study of the Italian PDO (protected designation of origin) olive oil Chianti Classico, based on near-infrared and UV-Visible spectroscopy, an artificial nose and an artificial tongue, with a set of samples representative of the whole Chianti Classico production and a considerable number of samples from a close production area (Maremma) was performed. The non-specific signals provided by the four fingerprinting analytical techniques, after a proper pre-processing, were used for building class models for Chianti Classico oils. The outcomes of classical class-modelling techniques like soft independent modelling of class analogy and quadratic discriminant analysis-unequal dispersed classes were compared with those of two techniques recently introduced into Chemometrics: multivariate range modelling and CAIMAN analogues modelling methods.
Assuntos
Óleos de Plantas/química , Espectrofotometria Ultravioleta/métodos , Espectroscopia de Luz Próxima ao Infravermelho/métodos , Itália , Modelos Estatísticos , Azeite de Oliva , Óleos de Plantas/normas , Controle de QualidadeRESUMO
In this paper we present a novel combined electrochemical-spectroscopic approach suitable to monitor trace levels of heavy metals directly in edible oils. The method is based on the electrochemical preconcentration/extraction of the analyte from the tested real matrix by cathodic deposition onto a Pt working electrode, then transfer and anodic re-oxidation of the metallic deposit to a "clean" aqueous solution, suitable for the subsequent spectroscopic analysis. The procedure has been here focused to the determination of lead in extra virgin olive oil (EVOO), performed by applying ICP-QMS or GFAAS techniques. To this aim, the EVOO samples were mixed with proper amounts of the room temperature ionic liquid (RTIL) [P14,6,6,6]+[NTf2]-, in order to obtain a non-aqueous supporting electrolyte suitable for the electrodeposition process. The feasibility and performance of the analytical strategy were at first tested in standard solutions of Pb(II) in RTIL, produced by anodic dissolution of lead in the RTIL, as well as in olive oil samples mixed with 0.5 M RTIL and spiked with known amounts of Pb(II). The optimisation of the electrochemical parameters was achieved by applying a D-Optimal Design, properly set up to optimise the efficiency of the deposition and re-oxidation steps, quantitative recovery and measurement time. Finally, the analytical procedure was applied to the determination of Pb content in some Italian EVOOs, without any need of performing mineralization pretreatments. Data obtained with the proposed procedure satisfactorily agree with those achieved by ICP-QMS analysis after microwave digestion, being differences between the two approaches within 10%, with the advantage of reducing to half the pretreatment time, operating at room temperature and avoiding the use of aggressive solvents.
Assuntos
Técnicas Eletroquímicas , Chumbo/análise , Azeite de Oliva/química , Espectrometria de MassasRESUMO
In this paper, we propose a novel strategy to perform cyclic voltammetric measurements with a platinum microelectrode directly in edible oil samples. The microelectrode was employed as an electronic tongue that, along with the application of chemometrics to the current-potential responses, proved useful for discriminating oils on the basis of their quality and geographical origin. The method proposed here is based on the use of suitable room temperature ionic liquids, added to oils as supporting electrolytes to provide conductivity to the low-polarity samples. The entire voltammograms, recorded directly on the oil/RTIL mixtures, were processed via principal component analysis and a classification technique (K nearest neighbors), to extract information on samples characteristics. Data processing showed that oils having different nature (i.e. maize and olive) or geographical origin (i.e. olive oils coming from different regions) can be distinguished.
Assuntos
Óleo de Milho/análise , Eletroquímica/instrumentação , Eletroquímica/métodos , Eletrônica/instrumentação , Óleos de Plantas/análise , Condutividade Elétrica , Eletrólitos/química , Desenho de Equipamento , Líquidos Iônicos/química , Microeletrodos , Azeite de Oliva , Platina/química , TemperaturaRESUMO
In this paper, an approach for the detection of extra-virgin olive oil (EVOO) free-acidity, based on combination of voltammetric profiles (Voltammetry) and Partial Least Squares (PLS) multivariate regression, is described. Voltammetric measurements are performed with a 12.5⯵m radius platinum microdisk, directly in the oil samples mixed with 0.5â¯M of the room temperature ionic liquid (RTIL) tri-hexyl(tetradecyl)phosphonium bis(trifluoromethylsulfonyl)imide, which acted as a supporting electrolyte, and allows achieving a suitable conductivity in the matrices. Multivariate regression is performed directly on full voltammetric responses recorded over a properly chosen negative potential range and scan rate, where essentially all free fatty acids, characterizing EVOOs, can be reproducibly reduced. PLS regression models are built by employing Italian EVOO samples training sets at different acidity levels (over the range 0.2% w/w - 1.5% w/w; (% w/w) represents mass percentage) and optimized by choosing the optimal complexity, in terms of number of latent variables (LVs). The free-acidity prediction is made through a multivariate model, constructed by using standards of known acidity (determined by the official volumetric titration method) and validated on an external sample set. To show the validity of the proposed method, the PLS/Voltammetry predictions of the free-acidity of a series of commercially available Italian EVOOs, ranging from 0.2 to 0.41 %w/w, are obtained and the values compared with those determined by the official titration approach. Differences found between the two methods are within 5% RSD.
Assuntos
Azeite de Oliva/química , Eletroquímica , Qualidade dos Alimentos , Concentração de Íons de Hidrogênio , Líquidos Iônicos/química , Análise dos Mínimos Quadrados , Análise Multivariada , Análise de Regressão , Temperatura , Fatores de TempoRESUMO
In this paper we present an electrochemical approach to prepare standard solutions of metal ions in a room temperature ionic liquid (IL), which can find useful application for analysis in hydrophobic matrices. The method, developed here for the case of lead ions, is based on the galvanostatic dissolution of a lead anode dipped directly in a suitable IL, namely tri-hexyl(tetradecyl)phosphonium bis (trifluoromethylsulfonyl) imide ([P14,6,6,6]+[NTf2]-). After each oxidation step, the metal dissolution process in the IL solutions was monitored by cyclic voltammetric measurements at a glassy carbon disk electrode. The results indicated that the peak current relevant to the reduction of the electro-generated Pb(II) increased linearly while increasing the oxidation time. By varying the oxidation time from 200 to 6000s, a set of Pb(II)/[P14,6,6,6]+[NTf2]- solutions at concentrations ranging between 10 and 300µgg-1 was prepared. To validate the efficiency of the electrochemical procedure to produce metal ion standard solutions, the Pb content was quantified by developing a microwave digestion procedure specifically suitable for the IL medium, followed by ICP-QMS analysis in the digested standards. The results indicated a satisfactory agreement between concentrations found by ICP-QMS and calculated from electrochemical data, with a coulometric efficiency of Pb(II) generation in ionic liquid ≥95.6%. Finally, the applicability of the Pb(II)/IL solutions as standards for analyses in hydrophobic media was tested by determining, by ICP-QMS, the Pb content in an extra-virgin olive oil spiked with known amounts of a Pb(II)/IL standard. Satisfactory Pb recoveries, ≥96%, were measured.
Assuntos
Eletroquímica/normas , Interações Hidrofóbicas e Hidrofílicas , Líquidos Iônicos/química , Chumbo/química , Azeite de Oliva/análise , Azeite de Oliva/química , Minerais/química , Oxirredução , Padrões de Referência , SoluçõesRESUMO
In this paper, a novel voltammetric/amperometric approach for the direct determination of free acidity (FFA, expressed as mass percentage of free oleic acid) in olive oil samples is presented. The method is based on the reduction processes occurring at a platinum microdisk electrode involving the free fatty acids present in the matrices. To overcome problems related to the low conductivity of the samples investigated, olive oils were mixed with suitable amounts of the room temperature ionic liquid (RTIL), tri-hexyl(tetradecyl)phosphonium bis (trifluoromethylsulfonyl) imide ([P14,6,6,6]+[NTf2]-), which acted as a supporting electrolyte. Conditions for a reliable quantification of the acids were preliminarily investigated by performing voltammetric and chronoamperometric measurements in RTIL solutions containing oleic acid at different concentrations. Oleic acid (OA) was chosen as a model compound as it is the main component of the FFA content in olive oils. In order to establish the effect of oxygen on the electroanalytical responses, the reduction process of OA was investigated under both deoxygenated and oxygenated conditions. It was found that, in both situations, the current arising from the electrode process of OA depended linearly on the OA concentration over a wide range varying from 0.1% to 8% OA (w/w). This range includes FFA values which can be found on all categories of commercially available oil samples, including extra-virgin, virgin and lampante oils. Voltammetric and chronoamperometric experiments were also performed in oil/RTIL samples artificially acidified (extra-virgin olive oils with known addition of oleic acid) and in natural olive oils from some commercial categories. The results obtained indicated that the electrochemical procedure developed was satisfactory in terms of both sensitivity and detection limits. The reliability of the proposed approach for the detection of FFA was finally assessed by comparison of the voltammetric/chronoamperometric values with those obtained by the official method for quantification of olive oil acidity, which is an acid/base volumetric titration.
Assuntos
Imidas/química , Líquidos Iônicos/química , Ácido Oleico/análise , Azeite de Oliva/química , Técnicas Eletroquímicas , Eletrodos , Ouro/química , Concentração de Íons de Hidrogênio , Ácido Oleico/química , Oxirredução , Platina/química , TemperaturaRESUMO
In this paper, the effect of mercury ion concentration on the preparation of mercury microelectrodes fabricated on a platinum microdisk of 10 microns radius was studied. The preparation of the mercury microelectrodes was followed by chronoamperometry, and the measurements were performed in Hg2(NO3)2 solutions with concentrations over the range 0.1-12.5 mM. The mercury microelectrode size was referred to as h/a, where h is the height of the mercury deposit and a is the radius of the inlaid microdisk. The mercury microelectrodes investigated had h/a values over the range 0-2. The results obtained indicated that from concentrated mercury ion solutions (> 0.5 mM) the mercury growth was somehow erratic due to the coalescence of small mercury droplets. On the other hand, from dilute solutions (< 0.5 mM), the mercury deposits grew smoothly. Under the latter conditions the geometric coefficient k, which characterises the steady state diffusion limiting current expression at a mercury microelectrode, was determined with good accuracy (within 5% error) from the chronoamperometric curves recorded during the mercury microelectrode preparation. In general, the coefficient k was calculated from theoretical expressions derived for a sphere cap and spheroidal geometry, which may model the shape of the mercury deposits. The comparison between theoretical and experimental k values suggested that both geometries equally modelled the experimental mercury deposit obtained. Finally, for the sphere cap geometry an algebraic expression relating k and h/a was derived for an easier k evaluation from experimental h/a values.
Assuntos
Compostos de Mercúrio/química , Mercúrio/química , Microeletrodos , Nitratos/química , Platina/química , Eletroquímica , Íons , Modelos Teóricos , SoluçõesRESUMO
The performance in anodic stripping voltammetry (ASV) of hemispherical mercury microelectrodes, fabricated by electrodeposition of liquid mercury on the surface of Pt microdisks which were surrounded by a rather thick or thin insulating shield, was compared. The Pt microdisks were produced by sealing a wire of 25 microm diameter into a glass capillary, and by coating the cylindrical length of the Pt wire with a cathodic electrophoretic paint. The ratio of the overall tip radius b, to the basal radius of the electrode a, so-called RG=b/a, was equal to 110+/-10 and 1.52+/-0.01 for the thick- and thin-shielded microdisk, respectively. The mercury microelectrodes were characterized by cyclic voltammetry at 1 mVs(-1), in 1mM Ru(NH(3))(6)(3+) aqueous solution. The steady-state voltammogram recorded with the thin-shielded mercury microelectrode displayed less hysteresis, while the steady-state current was about 30% higher than that of the thicker one. This was a consequence of the additional flux due to diffusion from behind the plane of the electrode. The flux enhancement, which was operative at the thin-shielded mercury microelectrode during the deposition step in the ASV experiments, allowed recording stripping peaks for Cd and Pb, which resulted about 32% larger than those recorded at the thicker shielded mercury microelectrode, under same experimental conditions. The usefulness of the thin-shielded mercury microelectrode for ASV measurements in real samples was verified by determining the content of heavy metal ions released in the pore water (pH 4.5) of a soil slurry.
RESUMO
An oxidation process observed in dilute aqueous solutions of ammonia was investigated under steady-state conditions with gold microelectrodes with radii in the range 2.5-30 microm. Over the ammonia concentration range 0.1-10 mM, a well-defined voltammetric wave was observed at approximately 1.4 V versus Ag/AgCl. It was attributed to the oxidation of hydroxide ions that arise from the dissociation of the weak base. The steady-state limiting current was found to depend on the concentration of supporting electrolyte, and in solution with low electrolyte, it was enhanced by migration contribution, as expected for a negatively charged species that oxidizes on a positively charged electrode. In addition, the steady-state limiting current was proportional to both the ammonia concentration and the electrode radius. The overall electrode process was analyzed in terms of a CE mechanism (homogeneous chemical reaction preceding the heterogeneous electron transfer) with a fast chemical reaction when measurements were carried out in solutions containing NH3 at < or = 5 mM and with electrodes having a radius of > or = 5 microm. This was ascertained by comparing experimental and theoretical data obtained by simulation. The formation of the soluble complex species Au(NH3)2+ was also considered as a possible alternative to explain the presence of the oxidation wave. This process however was ruled out, as the experimental data did not fit theoretical predictions in any of the conditions employed in the investigation. Instead, the direct oxidation of NH3, probably to N2O, was invoked to explain the anomalous currents found when the CE process was strongly kinetically hindered. Throughout this study, a parallel was made between the CE mechanism investigated here and that known to occur during the hydrogen evolution reaction from weak acids.