Disentangling Excimer Emission from Chiral Induction in Nanoscale Helical Silica Scaffolds Bearing Achiral Chromophores.

The synthesis and characterization of diketopyrrolopyrroles and perylenemonoimidodiesters linked to a substituted benzoic acid in the ortho, meta, and para positions, are reported. Grafting of these dyes on the surface of chiral silica nanohelices is used to probe how the morphology of the platform at the mesoscopic level affects the induction of chiroptical properties onto achiral molecular chromophores. The grafted structures are weakly (diketopyrrolopyrroles) or strongly (perylenemonoimidodiesters) emissive, exhibiting both locally-excited state emission and a broad, structureless emission assigned to excimers. The dissymmetry factors obtained using circular dichroism highlight optimized supramolecular organization between the chromophores for enhancing the chiroptical properties of the system. In the ortho- derivatives, poor organization due to steric hindrance is reflected in a low density of chromophores on walls of the silica-nanostructures (<0.1 vs. >0.3 and up to 0.6 molecules/nm2 for the ortho and meta or para derivatives, respectively) and lower gabs values than in the other derivatives (gabs <2×10-5 vs 6×10-5 for the ortho and para derivatives, respectively). The para derivatives presented a better organization and increased values of gabs . All grafted chromophores evidence varying degrees of excimer emission which was not found to directly correlate to their grafting density.

Chiral Binaphthalene Building Blocks for Self-Assembled Nanoscale CPL Emitters.

The introduction of biuret hydrogen-bonding sites onto chiral binaphthalene-based chromophores was investigated as a route to sub-micron-sized, vesicle-like aggregates endowed with chiroptical properties. The synthesis was conducted from the corresponding chiral 4,4'-dibromo-1,1'-bis(2-naphthol) via Suzuki-Miyaura coupling to afford luminescent chromophores whose emission spectrum could be tuned from blue to yellow-green through extension of the conjugation. For all compounds, the spontaneous formation of hollow spheres with a diameter of ca. 200-800 nm was evidenced by scanning electron microscopy, along with strong asymmetry in the circularly polarized absorption spectra. For some compounds, the emission also displayed circular polarization with values of glum = ca. 10-3 which could be increased upon aggregation.

Chiral Anthranyl Trifluoromethyl Alcohols: Structures, Oxidative Dearomatization and Chiroptical Properties.

Chiral trifluoromethyl alcohol groups were introduced at the hindered ortho positions of 9,10-diphenylanthracenes to investigate their effects on the physical properties and reactivity towards oxidative dearomatization. In such compact structures, the position in different quadrants and the preferred orientation of the -CH(OH)CF3 groups were determined by the relative and absolute configurations of each stereoisomer, respectively. As a consequence, the stereochemistry governs the organization of the H-bonded molecules in single crystals (homochiral dimers vs ribbon), whereas in chlorinated solvents, they all behave as discrete compounds. Concerning their reactivity, the stereospecific dearomative oxidation of these molecules leads to 9,10-bis-spiro-isobenzofuran-anthracenes, when using organic single-electron transfer oxidants. The chiroptical properties of the alcohols and the corresponding dearomatized products were compared and showed an important modulation of the intensity.

A Red-Light-Driven CO-Releasing Complex: Photoreactivities and Excited-State Dynamics of Highly Distorted Tricarbonyl Rhenium Phthalocyanines.

A complex comprising one [Re(CO)3 ]+ unit and a phthalocyanine (Pc) ligand (Re1 Pc) is shown to function as a photo-induced CO-releasing molecule (photoCORM) in the presence of O2 and a coordinative solvent under irradiation with red light, which can deeply penetrate living tissues. Transient absorption spectroscopic measurements indicate very short excited-state lifetimes and ultrafast intersystem crossing for Re1 Pc and Re2 Pc, which contains two [Re(CO)3 ]+ units. The excited-state properties are ascribed to efficient spin-orbit coupling and large Franck-Condon factors originating from the complexes' distorted structures, that is, unsymmetric coordination of [Re(CO)3 ]+ unit(s), one of which was confirmed by single-crystal X-ray analysis of a symmetrically substituted Pc with two [Re(CO)3 ]+ units. Re1 Pc represents a promising red-light-driven photoCORM that can be applied in biological environments or therapeutic applications.

Supramolecular Ladder Assemblies as a Model for Probing Electronic Interactions between Multiple Stacked π-Conjugated Systems.

A series of mono-, di-, and tri-topic receptors in which H-bonding sites, complementary to those of barbituric acid (BA), are fused is used to induce the supramolecular assembly of n×m ladders containing 1, 2, or 3 triphenylenevinylene units appended with BA. The topological constraint enforced by the architectures induces through-space interactions between the electroactive moieties that are reflected in the electronic absorption and emission spectrum. The n=2, m=2 or m=3 architectures undergo two single electron oxidation events, indicative of the formation of the corresponding mono- and di-radical cation species with comproportionation constants of 340 and 70, respectively. Comparison of the electrochemical potentials suggests that the charges are delocalized over the electroactive units in the assembly.

Chirality induction to achiral molecules by silica-coated chiral molecular assemblies.

Hybrid silica-organic nanohelices are used to organize a large variety of nonchiral small organic molecules or inorganic anions to nanometer-sized assemblies. Such chiral organization of achiral molecules induces chiroptical properties as detected by vibrational or electronic circular dichroism (CD), as well as from circularly polarized luminescence (CPL).

Loading Linear Arrays of CuII Inside Aromatic Amide Helices.

The very stable helices of 8-amino-2-quinolinecarboxylic acid oligoamides are shown to uptake CuII ions in their cavity through deprotonation of their amide functions with minimal alteration of their shape, unlike most metallo-organic structures which generally differ from their organic precursors. The outcome is the formation of intramolecular linear arrays of a defined number of CuII centers (up to sixteen in this study) at a 3 Šdistance, forming a molecular mimic of a metal wire completely surrounded by an organic sheath. The helices pack in the solid state so that the arrays of CuII extend intermolecularly. Conductive-AFM and cyclic voltammetry suggest that electrons are transported throughout the metal-loaded helices in contrast with hole transport observed for analogous foldamers devoid of metal ions.

Observing the Migration of Hydrogen Species in Hybrid Perovskite Materials through D/H Isotope Exchange.

Unlike heavier elements, the migration of hydrogen species in perovskite materials cannot be directly tracked using imaging or mass spectrocopy techniques. Our results show that quantitative analysis of D/H exchange in PbCH3ND3I3 allows indirect monitoring of H migration by following the N-D vibration using polarization-modulated infrared reflection-absorption spectroscopy. Kinetic analysis shows that the isotope exchange process is pseudo-first order and particularly sensitive to the intensity of light and relative humidity, and, to a lesser degree, sample thickness. In the presence of light (450 nm), the D/H exchange is accelerated up to 10-fold with respect to samples in the dark but slows again for higher light intensities.. The technique also allows the direct assessment of the efficiency of protective layers toward deterioration of hybrid organic-inorganic perovskite devices by moisture. Comparison of different monolayer-forming fluorinated molecules reveals important differences in rates attesting to variations between their efficiency in blocking access to the active layer by water molecules.

Anion-Induced Structural Diversity of Zn and Cd Coordination Polymers Based on Bis-9,10-(pyridine-4-yl)-anthracene, Their Luminescent Properties, and Highly Efficient Sensing of Nitro Derivatives and Herbicides.

Luminescent coordination polymers (CPs) of Zn2+ or Cd2+ and bis-9,10-(pyridine-4-yl)-anthracene (BA) show different 1D and 2D topologies depending on the anion used in the precursor. Compounds {[Zn(µ2-BA)(MeOH)2(p-Tos)2]} n (1) and {[Zn(µ2-BA)(MeOH)2(CF3CO2)2]} n (2) form linear structures and {BA@[Zn(µ2-BA)(MeOH)2(H2O)2](CF3SO3)2} n (3) featuring intercalation of uncoordinated BA molecules into linear ribbons. Cd-based CPs {[Cd(µ2-BA)2(ClO4)2]· n(DCM)} n (4) and {[Cd(µ2-BA)(MeOH)2(Dioxane)(η2-SiF6)]·mDioxane} n (5) form porous structures with 2D lattices. All complexes exhibit strong blue emission in the solid state with average lifetimes between 8 and 13 ns. The emission of compound 4 is sensitive to the presence of nitro aromatics, simazine, and trichloroanisole (TCA) and demonstrates nonlinear Stern-Volmer quenching kinetics. Limits of detection (LOD) of 15 and 16 ppb for picric acid and TCA were achieved, respectively.

Photoreduction of Thioether Gold(III) Complexes: Mechanistic Insight and Homogeneous Catalysis.

Complexes formed between AuCl3 and thioether ligands underwent a photoinduced reductive elimination under homogeneous conditions in dichloromethane and toluene solutions to afford the corresponding AuI complexes. All the gold(III) complexes were rapidly reduced to the gold(I) chloride complexes under 365 nm irradiation or ambient light while being thermally stable below 55 °C. The mechanism of photoreduction through Cl2 elimination is discussed based on a kinetic study and the chemical trapping of chlorine species: Cl2 , radical Cl. , and possibly Cl+ . The catalytic activities of the gold(III) chloride complexes and the corresponding gold(I) complexes obtained by in situ reduction were evaluated in the cyclization of N-propargylic amides to oxazoles. The merits of such photoreducible complexes in homogeneous gold catalysis are illustrated by a cascade reaction catalyzed by thioether gold complexes that affords a 4H-quinolizin-4-one in high yields.

Rationalisation of a mechanism for sensing single point variants in target DNA using anthracene-tagged base discriminating probes.

The labelling of DNA oligonucleotides with signalling groups that give a unique response to duplex formation depending on the target sequence is a highly effective strategy in the design of DNA-based hybridisation sensors. A key challenge in the design of these so-called base discriminating probes (BDPs) is to understand how the local environment of the signalling group affects the sensing response. The work herein describes a comprehensive study involving a variety of photophysical techniques, NMR studies and molecular dynamics simulations, on anthracene-tagged oligonucleotide probes that can sense single base changes (point variants) in target DNA strands. A detailed analysis of the fluorescence sensing mechanism is provided, with a particular focus on rationalising the high dependence of this process on not only the linker stereochemistry but also the site of nucleobase variation within the target strand. The work highlights the various factors and techniques used to respectively underpin and rationalise the BDP approach to point variant sensing, which relies on different responses to duplex formation rather than different duplex binding strengths.

Kinetic Isotope Effects Provide Experimental Evidence for Proton Tunneling in Methylammonium Lead Triiodide Perovskites.

The occurrence of proton tunneling in MAPbI3 hybrid organic inorganic perovskites is demonstrated through the effect of isotopic labeling of the methylammonium (MA) component on the dielectric permittivity response. Deuteration of the ammonium group results in the acceleration of proton migration (inverse primary isotope effect), whereas deuteration of the methyl group induces a normal secondary isotope effect. The activation energies for proton migration are calculated to be 50 and 27 meV for the tetragonal and orthorhombic phases, respectively, which decrease upon deuteration of the ammonium group. The low activation barrier and the deviation from unity of the ratio of the pre-exponential factors (AH/AD = 0.3-0.4) are consistent with a tunneling mechanism for proton migration. Deuteration of the PEDOT:PSS hole transport layer results in a behavior that is intermediate between that of the deuterated and undeuterated perovskite, due to extrinsic ion migration between the two materials.

Supramolecular photochemistry: recent progress and key challenges.

Supramolecular photochemistry has progressed enormously since it was first introduced thirty years ago. This article summarises the Closing Remarks from the Faraday Discussions on this topic, emphasising the recent progress made in the field as well as the key challenges that remain to be addressed. Specific examples in topical areas involving solar energy conversion, luminescent sensors, molecular logic and machines, and supramolecular photocatalysis are presented.

Template effects and supramolecular control of photoreactions in solution.

A review of supramolecular and template effects on photochemical reactions in solution is presented. Photoinduced [2+2] and [4+4] cycloaddition reactions, isomerization, electron transfer and radical processes are covered, as well as examples of DNA photoligation.

Anthracene photodimerization in a bis-chromophoric hydrogen-bonding receptor.

The photochemistry and photophysics of a bis-anthracenyl hydrogen-bonding receptor (7-(3,5-bis((6-(4-(anthracen-9-yloxy) butanamido)pyridin-2-yl)carbamoyl)phenylhept-6-ynoate, 2) were investigated in a fluid solution. At room temperature, fluorescence and intersystem crossing compete with intramolecular dimerization to form head-to-head and head-to-tail photoproducts, whereas fluorescence is the principal deactivation pathway at low temperature. Time-resolved fluorescence spectroscopy evidences two excimer-like emitting states whose sensitivity to quenching by oxygen is considerably lower than that of intramolecular photodimerization (K(SV) = ca. 450 vs. <100 L mol(-1), respectively). Based on the temperature-dependence and quenching efficiency of photodimerization, a mechanism is proposed in which the ground-state conformation of the tether controls the formation of the HH vs. HT photodimers via a non-emissive intermediate.

Reversible control over molecular recognition in surface-bound photoswitchable hydrogen-bonding receptors: towards read-write-erase molecular printboards.

The synthesis of an anthracene-bearing photoactive barbituric acid receptor and its subsequent grafting onto azide-terminated alkanethiol/Au self-assembled monolayers by using an Cu(I) -catalyzed azide-alkyne reaction is reported. Monolayer characterization using contact-angle measurements, electrochemistry, and spectroscopic ellipsometry indicate that the monolayer conversion is fast and complete. Irradiation of the receptor leads to photodimerization of the anthracenes, which induces the open-to-closed gating of the receptor by blocking access to the binding site. The process is thermally reversible, and polarization-modulated IR reflection-absorption spectroscopy indicates that photochemical closure and thermal opening of the surface-bound receptors occur in 70 and 100 % conversion, respectively. Affinity of the open and closed surface-bound receptor was characterized by using force spectroscopy with a barbituric-acid-modified atomic force microscope tip.

Redox-active ions unlock substitutional doping in halide perovskites.

Electrical doping of metal halide perovskites (MPHs) is a key step towards the use of this efficient and cost-effective semiconductor class in modern electronics. In this work, we demonstrate n-type doping of methylammonium lead iodide (CH3NH3PbI3) by the post-fabrication introduction of Sm2+. The ionic radius of the latter is similar to that of Pb2+ and can replace it without altering the perovskite crystal lattice. It is demonstrated that once incorporated, Sm2+ can act as a dopant by undergoing oxidation to Sm3+. This results in the release of a negative charge that n-dopes the material, resulting in an increase of conductivity of almost 3 orders of magnitude. Unlike substitution doping with heterovalent ions, furtive dopants do not require counterions to maintain charge neutrality with respect to the ions they replace and are thus more likely to be incorporated into the crystalline structure. The incorporation of the dopant throughout the material is evidenced by XPS and ToF-SIMS, while the XRD pattern shows no phase separation at low and medium doping concentrations. A shift of the Fermi level towards a conduction energy of 0.52 eV confirms the doping to be n-type with a charge carrier density, calculated using the Mott-Schottky method, estimated to be nearly 1017 cm-3 for the most conductive samples. Variable-temperature conductivity experiments show that the dopant is only partially ionized at room temperature due to dopant freeze-out.

Strong circularly polarized luminescence via intramolecular excited-state symmetry-breaking charge separation.

Trans-1,2-di(1-pyrenylamino)cycloxexane was found to display circularly polarized excimer emission (glum = 0.016) both in polar and non-polar solvents that is assigned to charge separation symmetry breaking on the basis of its large transition state dipole moment (12.1 D).

Probing proton diffusion as a guide to environmental stability in powder-engineered FAPbI3 and CsFAPbI3 perovskites.

Formamidinium lead iodide-based solar cells show promising device reliability. The grain imperfection can be further suppressed by developing powder methodology. The water uptake capability is critical for the stability of α-formamidinium lead triiodide (FAPbI3) thin films, and elucidating the migration of hydrogen species is challenging using routine techniques such as imaging or mass spectroscopy. Here, we decipher the proton diffusion to quantify indirect monitoring of H migration by following the N-D vibration using transmission infrared spectroscopy. The technique allows a direct assessment of the perovskite degradation associated with moisture. The inclusion of Cs in FAPbI3, reveals significant differences in proton diffusion rates, attesting to its impact. CsFAPbI3's ability to block the active layer access by water molecules is five times higher than α-FAPbI3, which is significantly higher than methylammonium lead triiodide (MAPbI3). Our protocol directly probes the local environment of the material to identify its intrinsic degradation mechanisms and stability, a key requirement for optoelectronic applications.

Sequential chiral induction between organic and inorganic supramolecular helical assemblies for the in situ formation of chiral carbon dots.

Self-organised helical bilayers of dicationic gemini surfactants confined in helical silica nanospace were transformed in situ to carbon dots (CDots) via pyrolysis. These water-dispersible CDots exhibit electronic absorption spanning the UV and visible range and possess symmetrical circular dichroism (CD) signals, the sign of which depends on the handedness of the helices.