RESUMO
The heterogeneous solid-gas reactions of crystals of [Rh(L2)(propene)][BArF4] (1, L2 = tBu2PCH2CH2PtBu2) with H2 and propene, 1-butene, propyne, or 1-butyne are explored by gas-phase nuclear magnetic resonance (NMR) spectroscopy under batch conditions at 25 °C. The temporal evolution of the resulting parahydrogen-induced polarization (PHIP) effects measures catalytic flux and thus interrogates the efficiency of catalytic pairwise para-H2 transfer, speciation changes in the crystalline catalyst at the molecular level, and allows for high-quality single-scan 1H, 13C NMR gas-phase spectra for the products to be obtained, as well as 2D-measurements. Complex 1 reacts with H2 to form dimeric [Rh(L2)(H)(µ-H)]2[BArF4]2 (4), as probed using EXAFS; meanwhile, a single-crystal of 1 equilibrates NMR silent para-H2 with its NMR active ortho isomer, contemporaneously converting into 4, and 1 and 4 each convert para-H2 into ortho-H2 at different rates. Hydrogenation of propene using 1 and para-H2 results in very high initial polarization levels in propane (>85%). Strong PHIP was also detected in the hydrogenation products of 1-butene, propyne, and 1-butyne. With propyne, a competing cyclotrimerization deactivation process occurs to afford [Rh(tBu2PCH2CH2PtBu2)(1,3,4-Me3C6H3)][BArF4], while with 1-butyne, rapid isomerization of 1-butyne occurs to give a butadiene complex, which then reacts with H2 more slowly to form catalytically active 4. Surprisingly, the high PHIP hydrogenation efficiencies allow hyperpolarization effects to be seen when H2 is taken directly from a regular cylinder at 25 °C. Finally, changing the chelating phosphine to Cy2PCH2CH2PCy2 results in initial high polarization efficiencies for propene hydrogenation, but rapid quenching of the catalyst competes to form the zwitterion [Rh(Cy2PCH2CH2PCy2){η6-(CF3)2(C6H3)}BArF3].
RESUMO
Soft X-ray absorption in situ studies of heterogeneous catalysts have been applied to areas such as copper methanol oxidation catalysts and cobalt Fischer-Tropsch type catalysts over a period of around two decades. The technique has the potential to offer several advantages for studying heterogeneous catalysts against hard X-ray XAS in: the systems that can be studied (includes elements such as C, N, O), the potential for surface sensitivity (crucial for catalysts, where reactions occur at surfaces) and the information content of the resulting spectra. Nevertheless, it is technically challenging and the necessary hardware has only been developed and evolved in a few specific groups worldwide. This perspective will introduce the technique in the context of other competing spectroscopies, summarise the development of hardware and the challenges that have been overcome in experimental terms, along with the outcome and impact on different fields within catalysis. Additionally, anticipated future trends and directions will be discussed.
RESUMO
The chemical functionality within porous architectures dictates their performance as heterogeneous catalysts; however, synthetic routes to control the spatial distribution of individual functions within porous solids are limited. Here we report the fabrication of spatially orthogonal bifunctional porous catalysts, through the stepwise template removal and chemical functionalization of an interconnected silica framework. Selective removal of polystyrene nanosphere templates from a lyotropic liquid crystal-templated silica sol-gel matrix, followed by extraction of the liquid crystal template, affords a hierarchical macroporous-mesoporous architecture. Decoupling of the individual template extractions allows independent functionalization of macropore and mesopore networks on the basis of chemical and/or size specificity. Spatial compartmentalization of, and directed molecular transport between, chemical functionalities affords control over the reaction sequence in catalytic cascades; herein illustrated by the Pd/Pt-catalysed oxidation of cinnamyl alcohol to cinnamic acid. We anticipate that our methodology will prompt further design of multifunctional materials comprising spatially compartmentalized functions.
Assuntos
Teste de Materiais/métodos , Dióxido de Silício/química , Catálise , Coloides , Microscopia Eletrônica de Transmissão , Paládio , Platina , PorosidadeRESUMO
Scanning tunneling microscopy, temperature-programmed reaction, near-edge X-ray absorption fine structure spectroscopy, and density functional theory calculations were used to study the adsorption and reactions of phenylacetylene and chlorobenzene on Ag(100). In the absence of solvent molecules and additives, these molecules underwent homocoupling and Sonogashira cross-coupling in an unambiguously heterogeneous mode. Of particular interest is the use of silver, previously unexplored, and chlorobenzene-normally regarded as relatively inert in such reactions. Both molecules adopt an essentially flat-lying conformation for which the observed and calculated adsorption energies are in reasonable agreement. Their magnitudes indicate that in both cases adsorption is predominantly due to dispersion forces for which interaction nevertheless leads to chemical activation and reaction. Both adsorbates exhibited pronounced island formation, thought to limit chemical activity under the conditions used and posited to occur at island boundaries, as was indeed observed in the case of phenylacetylene. The implications of these findings for the development of practical catalytic systems are considered.
RESUMO
Hydrogen spillover is of great importance to understanding many phenomena in heterogeneous catalysis and has long been controversial. Here we exploit well-defined nanoparticles to demonstrate its occurrence through evaluation of CO2 methanation kinetics. Combining platinum and cobalt nanoparticles causes a substantial increase in reaction rate, but increasing the spatial separation between discrete cobalt and platinum entities results in a dramatic â¼ 50% drop in apparent activation energy, symptomatic of H atom surface diffusion limiting the reaction rate.
RESUMO
The mechanistic role of platinum and precious metals in promoting cobalt hydrogenation catalysts of the type used in reactions such as Fischer-Tropsch synthesis is highly debated. Here we use well-defined monometallic Pt and Co nanoparticles (NPs) and CO2 methanation as a probe reaction to show that Pt NPs deposited near Co NPs can enhance the CO2 methanation rate by up to a factor of 6 per Co surface atom. In situ NEXAFS spectroscopy of these same Pt NP plus Co NP systems in hydrogen shows that the presence of nearby Pt NPs is able to significantly enhance reduction of the Co at temperatures relevant to Fischer-Tropsch synthesis and CO2 methanation. The mechanistic role of Pt in these reactions is discussed in light of these findings.
RESUMO
Pdn clusters offer unique selectivity and exploitable reactivity in catalysis. Understanding the behavior of Pdn clusters is thus critical for catalysis, applied synthetic organic chemistry and greener outcomes for precious Pd. The Pd3 cluster, [Pd3(µ-Cl)(µ-PPh2)2(PPh3)3][Cl] (denoted as Pd3Cl2), which exhibits distinctive reactivity, was synthesized and immobilized on a phosphine-functionalized polystyrene resin (denoted as immob-Pd3Cl2). The resultant material served as a tool to study closely the role of Pd3 clusters in a prototypical Suzuki-Miyaura cross-coupling of 4-fluoro-1-bromobenzene and 4-methoxyphenyl boronic acid at varying low Pd ppm concentrations (24, 45, and 68 ppm). Advanced heterogeneity tests such as Hg poisoning and the three-phase test showed that leached mononuclear or nanoparticulate Pd are unlikely to be the major active catalyst species under the reaction conditions tested. EXAFS/XANES analysis from (pre)catalyst and filtered catalysts during and after catalysis has shown the intactness of the triangular structure of the Pd3X2 cluster, with exchange of chloride (X) by bromide during catalytic turnover of bromoarene substrate. This finding is further corroborated by treatment of immob-Pd3Cl2 after catalyzing the Suzuki-Miyaura reaction with excess PPh3, which releases the cluster from the polymer support and so permits direct observation of [Pd3(µ-Br)(µ-PPh2)2(PPh3)3]+ ions by ESI-MS. No evidence is seen for a proposed intermediate in which the bridging halogen on the Pd3 motif is replaced by an aryl group from the organoboronic acid, i.e. formed by a transmetallation-first process. Our findings taken together indicate that the 'Pd3X2' motif is an active catalyst species, which is stabilized by being immobilized, providing a more robust Pd3 cluster catalyst system. Non-immobilized Pd3Cl2 is less stable, as is followed by stepwise XAFS of the non-immobilized Pd3Cl2, which gradually changes to a species consistent with 'Pdx(PPh3)y' type material. Our findings have far-reaching future implications for Pd3 cluster involvement in catalysis, showing that immobilization of Pd3 cluster species offers advantages for rigorous mechanistic examination and applied chemistries.
RESUMO
Model cobalt catalysts for CO(2) hydrogenation were prepared using colloidal chemistry. The turnover frequency at 6 bar and at 200-300 °C increased with cobalt nanoparticle size from 3 to 10 nm. It was demonstrated that near monodisperse nanoparticles in the size range of 3-10 nm could be generated without using trioctylphosphine oxide, a capping ligand that we demonstrate results in phosphorus being present on the metal surface and poisoning catalyst activity in our application.
Assuntos
Dióxido de Carbono/química , Cobalto/química , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Oxigênio/química , Catálise , Teste de Materiais , Tamanho da PartículaRESUMO
Some aspects of metal-catalyzed heterogeneous enantioselective reactions are reviewed with specific reference to four different systems where the phenomena that control enantioselection appear to be very different. In the case of glucose electro-oxidation, it is clear that any intrinsic chirality present at the metal surface plays a vital role. With α-keto hydrogenation, achiral surfaces modified by the adsorption of chiral agents become effective enantioselective catalysts and the formation of extended arrays of chiral species appears not to be of importance: instead a 1:1 docking interaction controlled by hydrogen bonding between the adsorbed chiral modifier and the prochiral reactant determines the outcome. Hydrogen bonding also plays a central role in ß-ketoester hydrogenation, but here fundamental studies indicate that the formation of ordered arrays involving the reactant and chiral ligand is of importance. Asymmetric CâC hydrogenation, though relatively little studied, has the potential for major impact in synthetic organic chemistry both on the laboratory scale and in the manufacture of fine chemicals and pharmaceuticals. The structural attributes that determine whether a given chiral ligand is effective have been identified; the ability to form strong covalent bonds with the metal surface while also resisting hydrogenation and displacement by the strongly adsorbing reactant under reaction conditions is an essential necessary condition. Beyond this, ligand rigidity in the vicinity of the chirality center coupled with resistance to SAM formation is a critically important factor whose absence results in racemic chemistry.
Assuntos
Metais/química , Catálise , Glucose/química , Hidrogenação , Oxirredução , EstereoisomerismoRESUMO
In the last two decades, surface-science experiments and techniques have been developed to focus on obtaining molecular information under reaction conditions at high pressures (near or above 1 bar) and liquid interfaces. This Minireview describes the results of these studies obtained by surface-sensitive laser spectroscopies, scanning tunneling microscopy, and X-ray spectroscopies usually practiced at a synchrotron light source. The use of model surfaces, single crystals, and monodisperse nanoparticles with variable size (1-10 nm) and shape facilitates meaningful interpretation of the experimental data. These methods allow evaluation of the molecular structures of intermediates, oxidation states of metals, and mobility of adsorbants. New techniques that are likely to make major contributions to the investigation of surfaces under reaction conditions are also discussed.
Assuntos
Metais/química , Estrutura Molecular , Oxirredução , Pressão , Análise Espectral/instrumentação , Análise Espectral/métodos , Propriedades de SuperfícieRESUMO
XPS, TEM, and reaction studies were used to examine the catalytic behavior of gold species deposited on lanthana toward the cross-coupling of phenylacetylene and iodobenzene. Atomically dispersed Au(I) and Au(III) were catalytically inert, whereas metallic Au(0) nanoparticles were both active and very selective. Thus it is metallic gold and not ionic gold that provides the catalytically active sites. Au(0) nanoparticles supported on silica, gamma-alumina, and BaO were active but relatively unselective; however, as with lanthana, ceria-supported Au(0) nanoparticles showed high selectivity. This strong promoting effect of the lanthanide oxide supports on Sonogashira selectivity cannot be accounted for in terms of acid/base, redox, or SMSI effects; it may be tentatively ascribed to metal --> support hydrogen spillover.
Assuntos
Acetileno/análogos & derivados , Ouro/química , Iodobenzenos/química , Nanopartículas Metálicas/química , Acetileno/síntese química , Acetileno/química , Catálise , Domínio Catalítico , Estrutura MolecularRESUMO
Temperature-programmed reaction measurements supported by scanning tunneling microscopy have shown that phenylacetylene and iodobenzene react on smooth Au(111) under vacuum conditions to yield biphenyl and diphenyldiacetylene, the result of homocoupling of the reactant molecules. They also produce diphenylacetylene, the result of Sonogashira cross-coupling, prototypical of a class of reactions that are of paramount importance in synthetic organic chemistry and whose mechanism remains controversial. Roughened Au(111) is completely inert toward all three reactions, indicating that the availability of crystallographically well-defined adsorption sites is crucially important. High-resolution X-ray photoelectron spectroscopy and near-edge X-ray absorption fine structure spectroscopy show that the reactants are initially present as intact, essentially flat-lying molecules and that the temperature threshold for Sonogashira coupling coincides with that for C-I bond scission in the iodobenzene reactant. The fractional-order kinetics and low temperature associated with desorption of the Sonogashira product suggest that the reaction occurs at the boundaries of islands of adsorbed reactants and that its appearance in the gas phase is rate-limited by the surface reaction. These findings demonstrate unambiguously and for the first time that this heterogeneous cross-coupling chemistry is an intrinsic property of extended, metallic pure gold surfaces: no other species, including solvent molecules, basic or charged (ionic) species are necessary to mediate the process.
RESUMO
Chromium(VI) contamination of drinking water arises from industrial activity wherever there is a lack of environmental legislation enforcement regarding the removal of such pollutants. Although it is possible to remove such harmful metal ions from drinking water through large-scale facilities, there currently exists no safe and simple way to filter chromium(VI) oxoanions at the point of use (which is potentially safer and necessary in remote locations or humanitarian scenarios). High-surface-area cloth substrates have been functionalized with calixarene molecules for the selective capture of aqueous chromium(VI) oxoanions in the presence of structurally similar anions. This is accomplished by pulsed plasmachemical deposition of a linker layer and subsequent functionalization with dimethylaminomethyl-calixarene (5,11,17,23-tetrakis[(dimethylamino)methyl]-25,26,27,28-tetrahydroxycalix[4]arene). Chromium(VI) oxoanions are captured by simply passing polluted water through the functionalized cloth, while other ions not harmful/beneficial to human health remain in the water. These cloth filters are simple to use, highly selective, and easily recyclable-thus making them attractive for point-of-use application in geographic regions lacking appropriate wastewater treatment plants or flawed environmental monitoring systems. Chromium(VI) pollutants have been successfully removed from real-world contaminated industrial wastewater streams using the dimethylaminomethyl-calixarene functionalized cloths.
Assuntos
Calixarenos/química , Cromo/química , Poluentes Químicos da Água/química , Purificação da Água/métodos , Adsorção , Cromo/isolamento & purificação , Gases em Plasma/química , Polipropilenos/química , Águas Residuárias/química , Poluentes Químicos da Água/isolamento & purificaçãoRESUMO
Asymmetric hydrogenation of C=C bonds is of the highest importance in organic synthesis, and such reactions are currently carried out with organometallic homogeneous catalysts. Achieving heterogeneous metal-catalyzed hydrogenation, a highly desirable goal, necessitates forcing the crucial enantiodifferentiating step to take place at the metal surface. By synthesis and application of six chiral sulfide ligands that anchor robustly to Pd nanoparticles and resist displacement, we have for the first time accomplished heterogeneous enantioselective catalytic hydrogenation of isophorone. High resolution XPS data established that ligand adsorption from solution occurred exclusively on the Pd nanoparticles and not on the carbon support. All ligands contained a pyrrolidine nitrogen to enable their interaction with the isophorone substrate while the sulfide functionality provided the required interaction with the Pd surface. Enantioselective turnover numbers of up to approximately 100 product molecules per ligand molecule were found with a very large variation in asymmetric induction between ligands: observed enantiomeric excesses increased with increasing size of the alkyl group in the sulfide. This likely reflects varying degrees of ligand dispersion on the surface: bulky substituent groups hinder close approach of ligand molecules to each other, inhibiting close-packed island formation, favoring dispersion as separate molecules, and leading to effective asymmetric induction. Conversely, small substituents favor island formation leading to very low asymmetric induction. Enantioselective reaction most likely involves initial formation of an enamine or iminium species, confirmed by use of an analogous tertiary amine, which leads to racemic product. Ligand rigidity and resistance to self-assembled monolayer formation are important attributes that should be designed into improved chiral modifiers.
RESUMO
Bleached out: The detection of an oxidized co-product, hydrogen peroxide, during an important tropospheric reaction, combined with the detection of photoaccelerated surface nitrate formation (a competing pathway), allows a likely mechanism to be proposed (see figure) which explains previously observed experimental stoichiometries.
RESUMO
The catalytic and structural properties of five different nanoparticle catalysts with varying Au/Ni composition were studied by six different methods, including in situ X-ray absorption spectroscopy and density functional theory (DFT) calculations. The as-prepared materials contained substantial amounts of residual capping agent arising from the commonly used synthetic procedure. Thorough removal of this material by oxidation was essential for the acquisition of valid catalytic data. All catalysts were highly selective toward N2 formation, with 50-50 Au:Ni material being best of all. In situ X-ray absorption near edge structure spectroscopy showed that although Au acted to moderate the oxidation state of Ni, there was no clear correlation between catalytic activity and nickel oxidation state. However, in situ extended X-ray absorption fine structure spectroscopy showed a good correlation between Au-Ni coordination number (highest for Ni50Au50) and catalytic activity. Importantly, these measurements also demonstrated substantial and reversible Au/Ni intermixing as a function of temperature between 550 °C (reaction temperature) and 150 °C, underlining the importance of in situ methods to the correct interpretation of reaction data. DFT calculations on smooth, stepped, monometallic and bimetallic surfaces showed that N + N recombination rather than NO dissociation was always rate-determining and that the activation barrier to recombination reaction decreased with increased Au content, thus accounting for the experimental observations. Across the entire composition range, the oxidation state of Ni did not correlate with activity, in disagreement with earlier work, and theory showed that NiO itself should be catalytically inert. Au-Ni interactions were of paramount importance in promoting N + N recombination, the rate-limiting step.
RESUMO
Porous Organic Cages (POCs) are an emerging class of self-assembling, porous materials with novel properties. They offer a key advantage over other porous materials in permitting facile solution processing and re-assembly. The combination of POCs with metal nanoparticles (NPs) unlocks applications in the area of catalysis. In this context, POCs can function as both the template of ultra-small NPs and a porous, but reprocessable, heterogeneous catalyst support. Here, we demonstrate the synthesis of ultra-small Pd NPs with an imine linked POC known as 'CC3', and show that hydrogen gas can be used to form metallic NPs at â¼200 °C without the reduction of the organic cage (and the accompanying, unwanted loss of crystallinity). The resulting materials are characterized using a range of techniques (including powder diffraction, scanning transmission electron microscopy and synchrotron X-ray absorption spectroscopy) and shown to be recrystallizable following dissolution in organic solvent. Their catalytic efficacy is demonstrated using the widely studied carbon monoxide oxidation reaction. This demonstration paves the way for using ultra-small NPs synthesized with POCs as solution-processable, self-assembling porous catalytic materials.
RESUMO
Electrolysis of water is key technology, not only for clean energy production, but to ensure a continued supply of hydrogen beyond fossil resources, essential to the manufacture of many chemical goods other than fuels. Cobalt nanomaterials have been widely identified as a promising candidate for the anode (oxygen evolution) reaction in this process, but much work has focused on applied materials or electrode design. Given the importance of oxidation state changes Co(III) â Co(IV) in the accepted reaction mechanism, in this work we look at size effects in small (4-10 nm) cobalt nanoparticles, where the ease of oxidation for lower cobalt oxidation states is known to change with particle size. To discriminate between geometric and chemical effects we have compared the catalysts in this study to others in the literature by turnover frequency (widely used in other areas of catalysis), in addition to the more commonly employed performance metric of the overpotential required to produce a current density of 10 mA cm-2. Comparisons are drawn to key examples of using well defined nanomaterials (where the surface are of cobalt sites can be estimated). This has enabled an estimated intrinsic turnover rate of ~ 1 O2 molecule per surface Co atom per second at an overpotential of 500 mV in the oxygen evolution reaction under typical alkaline reaction conditions (pH 14.0) to be identified.
RESUMO
Furfural is a key bioderived platform chemical whose reactivity under hydrogen atmospheres affords diverse chemical intermediates. Here, temperature-programmed reaction spectrometry and complementary scanning tunneling microscopy (STM) are employed to investigate furfural adsorption and reactivity over a Pt(111) model catalyst. Furfural decarbonylation to furan is highly sensitive to reaction conditions, in particular, surface crowding and associated changes in the adsorption geometry: furfural adopts a planar geometry on clean Pt(111) at low coverage, tilting at higher coverage to form a densely packed furfural adlayer. This switch in adsorption geometry strongly influences product selectivity. STM reveals the formation of hydrogen-bonded networks for planar furfural, which favor decarbonylation on clean Pt(111) and hydrogenolysis in the presence of coadsorbed hydrogen. Preadsorbed hydrogen promotes furfural hydrogenation to furfuryl alcohol and its subsequent hydrogenolysis to methyl furan, while suppressing residual surface carbon. Furfural chemistry over Pt is markedly different from that over Pd, with weaker adsorption over the former affording a simpler product distribution than the latter; Pd catalyzes a wider range of chemistry, including ring-opening to form propene. Insight into the role of molecular orientation in controlling product selectivity will guide the design and operation of more selective and stable Pt catalysts for furfural hydrogenation.
RESUMO
Bimetallic nanoparticles (to approximately 11 nm diameter) of CuNi and CuCo were prepared by a new synthetic route and the 1:1 atomic ratio of their constituent elements confirmed using STEM-EDS at a single particle level. These nanoparticles, supported on the native oxide layer of a silicon wafer, were studied in situ in a series of reactive gas atmospheres (H2 --> CO or CO/H2 --> O2 --> H2) using ambient pressure X-ray photoelectron spectroscopy (AP-XPS). Despite the deliberate similarity of nickel and cobalt with respect to copper, their restructuring behaviour is different. CuNi nanoparticles were found to surface segregate nickel in H2, but copper in O2 reversibly, while CuCo nanoparticles were found to surface segregate copper irreversibly when exposed to O2, such that the surface remains copper rich when re-exposed to H2. Both systems also restructure in opposition to the behaviour predicted by the surface free energies and enthalpies of oxide formation of the elements from which they are comprised--factors that are seen to control restructuring and surface segregation in many similar systems.