Oxide and carbide formation at titanium/organic monolayer interfaces.

X-ray photoelectron spectra (XPS) are reported from a series of buried titanium/organic monolayer interfaces accessed through sample delamination in ultrahigh vacuum (UHV). Conventional characterization of such buried interfaces requires ion-mill depth profiling, an energetic process that frequently destroys bonding information by chemically reducing the milled material. In contrast, we show that delaminating the samples at the metal/organic interface in vacuum yields sharp, nonreduced spectra that allow quantitative analysis of the buried interface chemistry. Using this UHV delamination XPS, we examine titanium vapor deposited onto a C18 cadmium stearate Langmuir-Blodgett monolayer supported on Au, SiO2, or PtO2 substrates. Titanium is widely used as an adhesion layer in organic thick film metallization as well as a top metal contact for molecular monolayer junctions, where it has been assumed to form a few-atoms-thick Ti carbide overlayer. We establish here that under many conditions the titanium instead forms a few-nanometers-thick Ti oxide overlayer. Both TiO2 and reduced TiOx species exist, with the relative proportion depending on oxygen availability. Oxygen is gettered during deposition from the ambient, from the organic film, and remarkably, from the substrate itself, producing substrate-dependent amounts of Ti oxide and Ti carbide "damage". On Au substrates, up to 20% of the molecular-monolayer carbon formed titanium carbide, SiO2 substrates approximately 15%, and PtO2 substrates <5%. Titanium oxide formation is also strongly dependent on the deposition rate and chamber pressure.

A collaboratively-derived science-policy research agenda.

The need for policy makers to understand science and for scientists to understand policy processes is widely recognised. However, the science-policy relationship is sometimes difficult and occasionally dysfunctional; it is also increasingly visible, because it must deal with contentious issues, or itself becomes a matter of public controversy, or both. We suggest that identifying key unanswered questions on the relationship between science and policy will catalyse and focus research in this field. To identify these questions, a collaborative procedure was employed with 52 participants selected to cover a wide range of experience in both science and policy, including people from government, non-governmental organisations, academia and industry. These participants consulted with colleagues and submitted 239 questions. An initial round of voting was followed by a workshop in which 40 of the most important questions were identified by further discussion and voting. The resulting list includes questions about the effectiveness of science-based decision-making structures; the nature and legitimacy of expertise; the consequences of changes such as increasing transparency; choices among different sources of evidence; the implications of new means of characterising and representing uncertainties; and ways in which policy and political processes affect what counts as authoritative evidence. We expect this exercise to identify important theoretical questions and to help improve the mutual understanding and effectiveness of those working at the interface of science and policy.

Scanning tunneling microscopy of template-stripped Au surfaces and highly ordered self-assembled monolayers.

Template stripping of Au films in ultrahigh vacuum (UHV) produces atomically flat and pristine surfaces that serve as substrates for highly ordered self-assembled monolayer (SAM) formation. Atomic resolution scanning tunneling microscopy of template-stripped (TS) Au stripped in UHV confirms that the stripping process produces a flat, predominantly 111 textured, atomically clean surface. Octanethiol SAMs vapor deposited in situ onto UHV TS Au show a c(4 x 2) superlattice with (square root 3 x square root 3) R30 degrees basic molecular structure having an ordered domain size up to 100 nm wide. These UHV results validate the TS Au surface as a simple, clean and high-quality surface preparation method for SAMs deposited from both vapor phase and solution phase.

Conductive supports for combined AFM-SECM on biological membranes.

Four different conductive supports are analysed regarding their suitability for combined atomic force and scanning electrochemical microscopy (AFM-SECM) on biological membranes. Highly oriented pyrolytic graphite (HOPG), MoS(2), template stripped gold, and template stripped platinum are compared as supports for high resolution imaging of reconstituted membrane proteins or native membranes, and as electrodes for transferring electrons from or to a redox molecule. We demonstrate that high resolution topographs of the bacterial outer membrane protein F can be recorded by contact mode AFM on all four supports. Electrochemical feedback experiments with conductive cantilevers that feature nanometre-scale electrodes showed fast re-oxidation of the redox couple Ru(NH(3))(6)(3+/2+) with the two metal supports after prolonged immersion in electrolyte. In contrast, the re-oxidation rates decayed quickly to unpractical levels with HOPG or MoS(2) under physiological conditions. On HOPG we observed heterogeneity in the re-oxidation rate of the redox molecules with higher feedback currents at step edges. The latter results demonstrate the capability of conductive cantilevers with small electrodes to measure minor variations in an SECM signal and to relate them to nanometre-scale features in a simultaneously recorded AFM topography. Rapid decay of re-oxidation rate and surface heterogeneity make HOPG or MoS(2) less attractive for combined AFM-SECM experiments on biological membranes than template stripped gold or platinum supports.

In-situ infrared spectroscopy of buried organic monolayers: influence of the substrate on titanium reactivity with a Langmuir-Blodgett film.

The reactivity of metals vapor deposited onto organic monolayers has historically been correlated to the metal/terminal organic group chemistry. Here we demonstrate that the chemical composition of the substrate unexpectedly plays a significant role as well. In particular, the reactivity of evaporated titanium toward a cadmium stearate Langmuir-Blodgett (LB) film was found to depend on the substrate upon which the LB film was deposited. Infrared spectra taken in a modified ATR (Kretschmann) geometry with a thin Au substrate showed large changes in peak shape, peak position, and peak width in the C-H stretching region, indicating titanium penetration into the LB film and decomposition of the original well-packed monolayer structure. LB monolayers formed on a platinum oxide (PtO(x)) surface showed remarkably small changes after Ti deposition, indicating only a slight increase in disorder and no significant metal penetration into the film. Films on SiO2 substrates showed reactivity between that of Au and PtO(x). These differences in reactivity can be correlated primarily with the amount of available oxygen associated with each substrate, including surface oxide layers and water incorporated within the LB film.

Ultraflat carbon film electrodes prepared by electron beam evaporation.

A facile method for the preparation of thin-film carbon electrodes by electron beam evaporation onto highly doped silicon is presented. The physical and electrochemical properties of these films both before and after postdeposition pyrolysis are investigated. Raman spectroscopy establishes the amorphous structure of the nonpyrolyzed carbon films and confirms the formation of graphitic carbon after pyrolysis at 1000 degrees C. Scanning force microscopy reveals the root-mean-square roughness of nonpyrolyzed films to be approximately 1 A, while pyrolyzed films exhibit an increased roughness of approximately 4 A. The electrochemical behavior of the electrodes resembles glassy carbon, with measured heterogeneous electron-transfer rate constants among the highest measured for thin carbon films. These carbon film electrodes will potentially find applications in such fields as molecular electronics and scanning probe microscopy of adsorbed species.