Particle Size Distributions for Cellulose Nanocrystals Measured by Transmission Electron Microscopy: An Interlaboratory Comparison.

Particle size is a key parameter that must be measured to ensure reproducible production of cellulose nanocrystals (CNCs) and to achieve reliable performance metrics for specific CNC applications. Nevertheless, size measurements for CNCs are challenging due to their broad size distribution, irregular rod-shaped particles, and propensity to aggregate and agglomerate. We report an interlaboratory comparison (ILC) that tests transmission electron microscopy (TEM) protocols for image acquisition and analysis. Samples of CNCs were prepared on TEM grids in a single laboratory, and detailed data acquisition and analysis protocols were provided to participants. CNCs were imaged and the size of individual particles was analyzed in 10 participating laboratories that represent a cross section of academic, industrial, and government laboratories with varying levels of experience with imaging CNCs. The data for each laboratory were fit to a skew normal distribution that accommodates the variability in central location and distribution width and asymmetries for the various datasets. Consensus values were obtained by modeling the variation between laboratories using a skew normal distribution. This approach gave consensus distributions with values for mean, standard deviation, and shape factor of 95.8, 38.2, and 6.3 nm for length and 7.7, 2.2, and 2.9 nm for width, respectively. Comparison of the degree of overlap between distributions for individual laboratories indicates that differences in imaging resolution contribute to the variation in measured widths. We conclude that the selection of individual CNCs for analysis and the variability in CNC agglomeration and staining are the main factors that lead to variations in measured length and width between laboratories.

The Certification of Standard Reference Material 1979: Powder Diffraction Line Profile Standard for Crystallite Size Analysis.

This rather long-standing project has resulted in a National Institute of Standards and Technology (NIST) Standard Reference Material (SRM) for the analysis of crystallite size from a consideration of powder diffraction line profile broadening. It consists of two zinc oxide powders, one with a crystallite size distribution centered at approximately 15 nm, and a second centered at about 60 nm. These materials display the effects of stacking faults that broaden specific hkl reflections and a slight amount of microstrain broadening. Certification data were collected on the high-resolution powder diffractometer located at beamline 11-BM of the Advanced Photon Source, and on a NIST-built laboratory diffractometer equipped with a Johansson incident beam monochromator and position sensitive detector. Fourier transforms were extracted from the raw data using a modified, two-step profile fitting procedure that addressed the issue of accurate background determination. The mean column lengths, 〈L〉area and 〈L〉vol, were then computed from the Fourier transforms of the specimen contribution for each reflection. Data were also analyzed with fundamental parameters approach refinements using broadening models to yield 〈L〉area and 〈L〉vol values. These values were consistent with the model-independent Fourier transform results; however, small discrepancies were noted for the 〈L〉area values from both machines and both crystallite size ranges. The fundamental parameters approach fits to the laboratory data yielded the certified lattice parameters.

Toxicity of carboxylated carbon nanotubes in endothelial cells is attenuated by stimulation of the autophagic flux with the release of nanomaterial in autophagic vesicles.

Carbon nanotubes (CNTs) exhibit a number of unique properties that make them attractive for various nanomedicine applications including their intravascular use. Therefore, the vascular toxicity of CNTs is a critical safety concern and methods of CNTs toxicity modulation are of great interest. Here, we report that carboxylated multiwalled carbon nanotubes (MWCNTs) induce a decrease in viability of cultured human umbilical vein endothelial cells (HUVECs) associated with the profound accumulation of autophagosomes. This autophagosome accumulation was mTOR kinase independent and was caused by blockade of the autophagic flux rather than by activation of autophagy. Stimulation of the autophagic flux with 1nmol/L bafilomycin A1 attenuated the cytotoxicity of carboxylated MWCNTs in HUVECs and was associated with the extracellular release of the nanomaterial in autophagic microvesicles. Thus, pharmacological stimulation of the autophagic flux may represent a new method of cytoprotection against toxic effects of nanomaterials. FROM THE CLINICAL EDITOR: This study investigates the mechanisms of toxicity of multiwalled carbon nanutubes on human endothelial cells, concluding that pharmacological stimulation of autophagic flux may represent a new method of cytoprotection against the toxic effects of these nanomaterials.

Particle size distributions by transmission electron microscopy: an interlaboratory comparison case study.

This paper reports an interlaboratory comparison that evaluated a protocol for measuring and analysing the particle size distribution of discrete, metallic, spheroidal nanoparticles using transmission electron microscopy (TEM). The study was focused on automated image capture and automated particle analysis. NIST RM8012 gold nanoparticles (30 nm nominal diameter) were measured for area-equivalent diameter distributions by eight laboratories. Statistical analysis was used to (1) assess the data quality without using size distribution reference models, (2) determine reference model parameters for different size distribution reference models and non-linear regression fitting methods and (3) assess the measurement uncertainty of a size distribution parameter by using its coefficient of variation. The interlaboratory area-equivalent diameter mean, 27.6 nm ± 2.4 nm (computed based on a normal distribution), was quite similar to the area-equivalent diameter, 27.6 nm, assigned to NIST RM8012. The lognormal reference model was the preferred choice for these particle size distributions as, for all laboratories, its parameters had lower relative standard errors (RSEs) than the other size distribution reference models tested (normal, Weibull and Rosin-Rammler-Bennett). The RSEs for the fitted standard deviations were two orders of magnitude higher than those for the fitted means, suggesting that most of the parameter estimate errors were associated with estimating the breadth of the distributions. The coefficients of variation for the interlaboratory statistics also confirmed the lognormal reference model as the preferred choice. From quasi-linear plots, the typical range for good fits between the model and cumulative number-based distributions was 1.9 fitted standard deviations less than the mean to 2.3 fitted standard deviations above the mean. Automated image capture, automated particle analysis and statistical evaluation of the data and fitting coefficients provide a framework for assessing nanoparticle size distributions using TEM for image acquisition.

Correlation between the performance and microstructure of Ti/Al/Ti/Au Ohmic contacts to p-type silicon nanowires.

Understanding the electrical and microstructural aspects of contact formation at nanoscale is essential for the realization of low-resistance metallization suitable for the next generation of nanowire based devices. In this study, we present detailed electrical and microstructural characteristics of Ti/Al/Ti/Au metal contacts to p-type Si nanowires (SiNWs) annealed at various temperatures. Focused ion beam cross-sectioning techniques and scanning transmission electron microscopy (STEM) were used to determine the microstructure of the source/drain metal contacts of working SiNW field-effect transistors (FETs) annealed for 30 s in the 450-850 °C temperature range in inert atmosphere. Formation of titanium silicides is observed at the metal/semiconductor interface after the 750 °C anneal. Extensive Si out-diffusion from the nanowire after the 750 °C anneal led to Kirkendall void formation. Annealing at 850 °C led to almost complete out-diffusion of Si from the nanowire core. Devices with 550 °C annealed contacts had linear electrical characteristics; whereas the devices annealed at 750 °C had the best characteristics in terms of linearity, symmetric behavior, and yield. Devices annealed at 850 °C had poor yield, which can be directly attributed to the microstructure of the contact region observed in STEM.

Fabrication, characterization and simulation of high performance Si nanowire-based non-volatile memory cells.

We report the fabrication, characterization and simulation of Si nanowire SONOS-like non-volatile memory with HfO(2) charge trapping layers of varying thicknesses. The memory cells, which are fabricated by self-aligning in situ grown Si nanowires, exhibit high performance, i.e. fast program/erase operations, long retention time and good endurance. The effect of the trapping layer thickness of the nanowire memory cells has been experimentally measured and studied by simulation. As the thickness of HfO(2) increases from 5 to 30 nm, the charge trap density increases as expected, while the program/erase speed and retention remain the same. These data indicate that the electric field across the tunneling oxide is not affected by HfO(2) thickness, which is in good agreement with simulation results. Our work also shows that the Omega gate structure improves the program speed and retention time for memory applications.

Preparation and Properties of Nanoparticles of Calcium Phosphates With Various Ca/P Ratios.

This study aimed at preparing and studying the properties of nanoparticles of calcium phosphate (nCaP) with Ca/P ratios ranging from 1.0 to 1.67 using a spray-drying technique. Micro-structural analyses suggested that the nCaPs with Ca/P ratios of 1.67 to 1.33 were nano-sized amorphous calcium phosphate (ACP) containing varying amounts of acid phosphate and carbonate. The nCaP with Ca/P ratio of 1 contained only nano-sized low crystalline dicalcium phosphate (DCP). BET measurements of the nCaPs showed specific surface areas of (12 ± 2 to 50 ± 1) m(2)/g, corresponding to estimated equivalent spherical diameters of (38 to 172) nm. However, dynamic light scattering measurements revealed much larger particles of (380 ± 49 to 768 ± 111) nm, owing to agglomeration of the smaller primary nano particles as revealed by Scanning Electron Microscopy (SEM). Thermodynamic solubility measurements showed that the nCaPs with Ca/P ratio of 1.33 - 1.67 all have similar solubility behavior. The materials were more soluble than the crystalline hydroxyapatite (HA) at pH greater than about 4.7, and more soluble than ß-tricalcium phosphate (ß-TCP), octacalcium phosphate (OCP) and DCP at pH above 5.5. Their solubility approached that of α-tricalcium phosphate (α-TCP) at about pH 7. These nCaPs, which cannot be readily prepared by other currently available methods for nanoparticle preparation, have potential biomedical applications.

Redox-Active Molecular Nanowire Flash Memory for High-Endurance and High-Density Nonvolatile Memory Applications.

In this work, high-performance top-gated nanowire molecular flash memory has been fabricated with redox-active molecules. Different molecules with one and two redox centers have been tested. The flash memory has clean solid/molecule and dielectric interfaces, due to the pristine molecular self-assembly and the nanowire device self-alignment fabrication process. The memory cells exhibit discrete charged states at small gate voltages. Such multi-bit memory in one cell is favorable for high-density storage. These memory devices exhibit fast speed, low power, long memory retention, and exceptionally good endurance (>10(9) cycles). The excellent characteristics are derived from the intrinsic charge-storage properties of the protected redox-active molecules. Such multi-bit molecular flash memory is very attractive for high-endurance and high-density on-chip memory applications in future portable electronics.

Bayesian Inference of Nanoparticle-Broadened X-Ray Line Profiles.

A single-step, self-contained method for determining the crystallite-size distribution and shape from experimental x-ray line profile data is presented. It is shown that the crystallite-size distribution can be determined without invoking a functional form for the size distribution, determining instead the size distribution with the least assumptions by applying the Bayesian/MaxEnt method. The Bayesian/MaxEnt method is tested using both simulated and experimental CeO2 data, the results comparing favourably with experimental CeO2 data from TEM measurements.

The effect of protein corona composition on the interaction of carbon nanotubes with human blood platelets.

Carbon nanotubes (CNT) are one of the most promising nanomaterials for use in medicine. The blood biocompatibility of CNT is a critical safety issue. In the bloodstream, proteins bind to CNT through non-covalent interactions to form a protein corona, thereby largely defining the biological properties of the CNT. Here, we characterize the interactions of carboxylated-multiwalled carbon nanotubes (CNTCOOH) with common human proteins and investigate the effect of the different protein coronas on the interaction of CNTCOOH with human blood platelets (PLT). Molecular modeling and different photophysical techniques were employed to characterize the binding of albumin (HSA), fibrinogen (FBG), γ-globulins (IgG) and histone H1 (H1) on CNTCOOH. We found that the identity of protein forming the corona greatly affects the outcome of CNTCOOH's interaction with blood PLT. Bare CNTCOOH-induced PLT aggregation and the release of platelet membrane microparticles (PMP). HSA corona attenuated the PLT aggregating activity of CNTCOOH, while FBG caused the agglomeration of CNTCOOH nanomaterial, thereby diminishing the effect of CNTCOOH on PLT. In contrast, the IgG corona caused PLT fragmentation, and the H1 corona induced a strong PLT aggregation, thus potentiating the release of PMP.

Surface mediated assembly of small, metastable gold nanoclusters.

The unique properties of metallic nanoclusters are attractive for numerous commercial and industrial applications but are generally less stable than nanocrystals. Thus, developing methodologies for stabilizing nanoclusters and retaining their enhanced functionality is of great interest. We report the assembly of PPh3-protected Au9 clusters from a heterogeneous mixture into films consisting of sub 3 nm nanocluster assemblies. The depositing nanoclusters are metastable in solution, but the resulting nanocluster assemblies are stabilized indefinitely in air or fresh solvent. The films exhibit distinct structure from Au nanoparticles observed by X-ray diffraction, and film dissolution data support the preservation of small nanoclusters. UV-Vis spectroscopy, electrospray ionization mass spectrometry, X-ray photoelectron spectroscopy and electron microscopy are used to elucidate information regarding the nanocluster formation and assembly mechanism. Preferential deposition of nanocluster assemblies can be achieved on multiple substrates, including polymer, Cr, Si, SiO2, SiNx, and metal-organic frameworks (MOFs). Unlike other vapor phase coating processes, nanocluster assembly on the MIL-68(In) MOF crystal is capable of preferentially coating the external surface and stabilizing the crystal structure in hydrothermal conditions, which should enhance their storage, separation and delivery capabilities.

A new approach to prepare well-dispersed CaF(2) nanoparticles by spray drying technique.

Previously, nano-sized calcium fluoride (CaF2) particles were prepared using a spray drying method by simultaneously feeding Ca(OH)2 and NH4F solutions to a two-liquid nozzle. The aim of the present study was to prepare better-dispersed nano-CaF2 particles by co-forming a soluble salt, sodium chloride (NaCl). NaCl of various concentrations were added to the NH(4) F solution, leading to formation of (CaF2 +NaCl) composites with CaF2 /NaCl molar ratios of 4/1, 4/4, and 4/16. Pure nano-CaF2 was also prepared as the control. Powder X-ray diffraction analysis showed that the products contained crystalline CaF2 and NaCl. Scanning electron microscopy examinations showed that both the CaF2 /NaCl composite and pure CaF2 particles were about (50-800) nm in size and consisted of primary CaF2 particles of < 50 nm in size. BET surface area measurements showed similar primary particle sizes for all samples. Dynamic light scattering measurements showed that the washed (CaF2+NaCl) particles were much smaller than the pure CaF2 as the dissolution of NaCl "freed" most of the primary CaF2 particles, leading to a greater degree of particle dispersion. The well-dispersed nano-CaF2 may be expected to be a more effective anticaries agent than NaF by providing longer lasting elevations of fluoride concentrations in oral fluids.