RESUMO
The sequence of transitions between different phases of BiNbO4 has been thoroughly investigated and clarified using thermal analysis, high-resolution neutron diffraction, and Raman spectroscopy. The theoretical optical phonon modes of the α-phase have been calculated. Based on thermoanalytical data supported by density functional theory (DFT) calculations, the ß-phase is proposed to be metastable, while the α- and γ-phases are stable below and above 1040 °C, respectively. Accurate positional parameters for oxygen positions in the three main polymorphs (α, ß, and γ) are presented and the structural relationships between these polymorphs are discussed. Even though no significant changes, only relaxation phenomena, are observed in the dielectric behavior of α-BiNbO4 below 1000 °C, evidence of two further subtle transitions at â¼350 and 600 °C is presented through careful analysis of structural parameters from variable temperature neutron diffraction measurements. Such phase variations are also evident in the phonon modes in Raman spectra and supported by changes in the thermoanalytical data. These subtle transitions may correspond to the previously proposed antiferroelectric to ferroelectric and ferroelectric to paraelectric phase transitions, respectively.
RESUMO
The Hall scattering factor, r, is a key quantity for establishing carrier concentration and drift mobility from Hall measurements; in experiments, it is usually assumed to be 1. In this paper, we use a combination of analytical and ab initio modeling to determine r in graphene. Although at high carrier densities r ≈ 1 in a wide temperature range, at low doping the temperature dependence of r is very strong with values as high as 4 below 300 K. These high values are due to the linear bands around the Dirac cone and the carrier scattering rates due to acoustic phonons. At higher temperatures, r can instead become as low as 0.5 due to the contribution of both holes and electrons and the role of optical phonons. Finally, we provide a simple analytical model to compute accurately r in graphene in a wide range of temperatures and carrier densities.
RESUMO
We present a first-principles study of the temperature- and density-dependent intrinsic electrical resistivity of graphene. We use density-functional theory and density-functional perturbation theory together with very accurate Wannier interpolations to compute all electronic and vibrational properties and electron-phonon coupling matrix elements; the phonon-limited resistivity is then calculated within a Boltzmann-transport approach. An effective tight-binding model, validated against first-principles results, is also used to study the role of electron-electron interactions at the level of many-body perturbation theory. The results found are in excellent agreement with recent experimental data on graphene samples at high carrier densities and elucidate the role of the different phonon modes in limiting electron mobility. Moreover, we find that the resistivity arising from scattering with transverse acoustic phonons is 2.5 times higher than that from longitudinal acoustic phonons. Last, high-energy, optical, and zone-boundary phonons contribute as much as acoustic phonons to the intrinsic electrical resistivity even at room temperature and become dominant at higher temperatures.
RESUMO
We use first-principles methods based on density functional perturbation theory to characterize the lifetimes of the acoustic phonon modes and their consequences on the thermal transport properties of graphene. We show that using a standard perturbative approach, the transverse and longitudinal acoustic phonons in free-standing graphene display finite lifetimes in the long-wavelength limit, making them ill-defined as elementary excitations in samples of dimensions larger than â¼1 µm. This behavior is entirely due to the presence of the quadratic dispersions for the out-of-plane phonon (ZA) flexural modes that appear in free-standing low-dimensional systems. Mechanical strain lifts this anomaly, and all phonons remain well-defined at any wavelength. Thermal transport is dominated by ZA modes, and the thermal conductivity is predicted to diverge with system size for any amount of strain. These findings highlight strain and sample size as key parameters in characterizing or engineering heat transport in graphene.
Assuntos
Grafite/química , Modelos Químicos , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Acústica , Simulação por Computador , Módulo de Elasticidade , Transferência de Energia , Temperatura Alta , Espalhamento de Radiação , Condutividade TérmicaRESUMO
The thermal conductivity of ideal short-period superlattices is computed using harmonic and anharmonic force constants derived from density-functional perturbation theory and by solving the Boltzmann transport equation in the single-mode relaxation time approximation, using silicon-germanium as a paradigmatic case. We show that in the limit of small superlattice period the computed thermal conductivity of the superlattice can exceed that of both the constituent materials. This is found to be due to a dramatic reduction in the scattering of acoustic phonons by optical phonons, leading to very long phonon lifetimes. By variation of the mass mismatch between the constituent materials in the superlattice, it is found that this enhancement in thermal conductivity can be engineered, providing avenues to achieve high thermal conductivities in nanostructured materials.
RESUMO
In this paper we tackle the challenge of gaining control of the photophysical properties of PAHs through a site-specific N-doping within the structural aromatic framework. By developing a simple predictive tool that identifies C(sp2)-positions that if substituted with a heteroatom would tailor the changes in the absorption and emission spectral envelopes, we predict optimal substitutional patterns for the model peri-xanthenoxanthene (PXX) PAH. Specifically, TDDFT calculations of the electron density difference between the S1 excited state and S0 ground state of PXX allowed us to identify the subtleties in the role of sites i.e., electron donating or withdrawing character on excitation. The replacement of two C(sp2)-atoms with two N-atoms, in either electron donating or withdrawing positions, shifts the electronic transitions either to low or high energy, respectively. This consequently shifts the PXX absorption spectral envelop bathochromically or hypsochromically, as demonstrated by steady-state absorption spectroscopic measurements. Within the series of synthesised N-doped PXX, we tune the optical band gap within an interval of â¼0.4 eV, in full agreement with the theoretical predictions. Relatedly, measurements show the more blueshifted the absorption/emission energies, the greater the fluorescence quantum yield value (from â¼45% to â¼75%). On the other hand, electrochemical investigations suggested that the N-pattern has a limited influence on the redox properties. Lastly, depending on the N-pattern, different supramolecular organisations could be obtained at the solid-state, with the 1,7-pattern PXX molecule forming multi-layered, graphene-like, supramolecular sheets through a combination of weak H-bonding and π-π stacking interactions. Supramolecular striped patterned sheets could also be formed with the 3,9- and 4,10-congeners when co-crystallized with a halogen-bond donor molecule.
RESUMO
The thermal conductivity of disordered silicon-germanium alloys is computed from density-functional perturbation theory and with relaxation times that include both harmonic and anharmonic scattering terms. We show that this approach yields an excellent agreement at all compositions with experimental results and provides clear design rules for the engineering of nanostructured thermoelectrics. For Si(x)Ge(1-x), more than 50% of the heat is carried at room temperature by phonons of mean free path greater than 1 ââµm, and an addition of as little as 12% Ge is sufficient to reduce the thermal conductivity to the minimum value achievable through alloying. Intriguingly, mass disorder is found to increase the anharmonic scattering of phonons through a modification of their vibration eigenmodes, resulting in an increase of 15% in thermal resistivity.
RESUMO
Environmentally sensitive (ES) dyes have been used for many decades to study the lipid order of cell membranes, as different lipid phases play a crucial role in a wide variety of cell processes. Yet, the understanding of how ES dyes behave, interact, and affect membranes at the atomistic scale is lacking, partially due to the lack of molecular dynamics (MD) models of these dyes. Here, we present ground- and excited-state MD models of commonly used ES dyes, Laurdan and di-4-ANEPPDHQ, and use MD simulations to study the behavior of these dyes in a disordered and an ordered membrane. We also investigate the effect that these two dyes have on the hydration and lipid order of the membranes, where we see a significant effect on the hydration of lipids proximal to the dyes. These findings are combined with experimental fluorescence experiments of ordered and disordered vesicles and live HeLa cells stained by the aforementioned dyes, where the generalized polarization (GP) values were measured at different concentrations of the dyes. We observe a small but significant decrease of GP at higher Laurdan concentrations in vesicles, while the same effect is not observed in cell membranes. The opposite effect is observed with di-4-ANEPPDHQ where no significant change in GP is seen for vesicles but a very substantial and significant decrease is seen in cell membranes. Together, our results show the profound effect that ES dyes have on membranes, and the presented MD models will be important for further understanding of these effects.
RESUMO
QUANTUM ESPRESSO is an integrated suite of computer codes for electronic-structure calculations and materials modeling, based on density-functional theory, plane waves, and pseudopotentials (norm-conserving, ultrasoft, and projector-augmented wave). The acronym ESPRESSO stands for opEn Source Package for Research in Electronic Structure, Simulation, and Optimization. It is freely available to researchers around the world under the terms of the GNU General Public License. QUANTUM ESPRESSO builds upon newly-restructured electronic-structure codes that have been developed and tested by some of the original authors of novel electronic-structure algorithms and applied in the last twenty years by some of the leading materials modeling groups worldwide. Innovation and efficiency are still its main focus, with special attention paid to massively parallel architectures, and a great effort being devoted to user friendliness. QUANTUM ESPRESSO is evolving towards a distribution of independent and interoperable codes in the spirit of an open-source project, where researchers active in the field of electronic-structure calculations are encouraged to participate in the project by contributing their own codes or by implementing their own ideas into existing codes.
RESUMO
We determine from first principles the finite-temperature properties-linewidths, line shifts, and lifetimes-of the key vibrational modes that dominate inelastic losses in graphitic materials. In graphite, the phonon linewidth of the Raman-active E(2g) mode is found to decrease with temperature; such anomalous behavior is driven entirely by electron-phonon interactions, and does not appear in the nearly degenerate infrared-active E(1u) mode. In graphene, the phonon anharmonic lifetimes and decay channels of the A(1)' mode at K dominate over E(2g) at Gamma and couple strongly with acoustic phonons, highlighting how ballistic transport in carbon-based interconnects requires careful engineering of phonon decays and thermalization.
RESUMO
The issue of tuning the relative height of the first two dehydrogenation barriers of methane (CH(4) --> CH(3) + H and CH(3) --> CH(2) + H) is addressed using density-functional theory. It is shown that the combination of a very active reaction center-such as Rh-with a more inert substrate-such as Cu(111)-may hinder the second dehydrogenation step with respect to the first, thus resulting in the reverse of the natural order of the two barriers' heights.
RESUMO
The occurrence of a noncollinear magnetic structure at a Mn monolayer grown epitaxially on Fe(100) is predicted theoretically, using spinor density-functional theory, and observed experimentally, using x-ray magnetic circular dichroism (XMCD) and linear dichroism (XMLD) spectroscopies. The combined use of XMCD and XMLD at the Mn-absorption edge allows us to assess the existence of ferromagnetic and antiferromagnetic order at the interface, and also to determine the moment orientations with element specificity. The experimental results thus obtained are in excellent agreement with the magnetic structure determined theoretically.
RESUMO
The first two steps of methane dissociation on Rh(111) have been investigated using density-functional theory, focusing on the dependence of the catalyst's reactivity on the atomic coordination of the active metal site. We find that, although the barrier for the dehydrogenation of methane (CH4 --> CH3 + H) decreases as expected with the coordination of the binding site, the dehydrogenation of methyl (CH3 --> CH2 + H) is hindered at an ad-atom defect, where the first reaction is instead most favored. Our findings indicate that, if it were possible to let the dissociation occur selectively at ad-atom defects, the reaction could be blocked after the first dehydrogenation step, a result of high potential interest for many dream reactions such as, for example, the direct conversion of methane to methanol.