RESUMO
In response to the current trend of miniaturization of electronic devices and sensors, the complementary coupling of high-efficiency energy conversion and low-loss energy storage technologies has given rise to the development of photocapacitors (PCs), which combine energy conversion and storage in a single device. Photovoltaic systems integrated with supercapacitors offer unique light conversion and storage capabilities, resulting in improved overall efficiency over the past decade. Consequently, researchers have explored a wide range of device combinations, materials, and characterization techniques. This review provides a comprehensive overview of photocapacitors, including their configurations, operating mechanisms, manufacturing techniques, and materials, with a focus on emerging applications in small wireless devices, Internet of Things (IoT), and Internet of Everything (IoE). Furthermore, we highlight the importance of cutting-edge materials such as metal-organic frameworks (MOFs) and organic materials for supercapacitors, as well as novel materials in photovoltaics, in advancing PCs for a carbon-free, sustainable society. We also evaluate the potential development, prospects, and application scenarios of this emerging area of research.
RESUMO
BACKGROUND: Allergic rhinitis (AR) is one of the most common allergic diseases affecting children. Objective assessment of nasal obstruction is possible through active anterior rhinomanometry (AAR). Several factors, such as passive smoke exposure (PSE), are triggers for worsening nasal obstruction and chronic inflammation. PSE affects bacterial eubiosis in the upper respiratory tract. This study evaluates the influence of PSE and cotinine levels on both nasal obstruction and local microbiome composition in children with AR. METHODS: Fifty patients (aged between 6 and 16 years) with AR monosensitized grass pollen were enrolled. They underwent skin prick tests, a nasal swab to evaluate the microbial composition of the anterior nostrils, a basal AAR, a post-decongestion AAR, and spirometry. Serum cotinine levels were assessed to evaluate PSE. RESULTS: A significantly lower percentage of mean nasal flow (mNF%) was observed before and after hydrazine administration in subjects exposed to passive smoke (Exp group) compared with the non-exposed group. In contrast, higher cotinine levels were observed in the Exp group than in the controls. PSE has been associated with a decrease in biodiversity and a change in the nasal microbiome composition; instead, although to a different extent, the abundance of specific taxa resulted in being correlated to cotinine levels and nasal flow. CONCLUSION: Children with AR exposed to passive smoke with positive serum cotinine could represent a risk factor for developing nasal obstruction and microbial dysbiosis, suggesting their possible role in pathophysiological processes.
Assuntos
Microbiota , Rinite Alérgica , Adolescente , Criança , Disbiose , Humanos , Projetos Piloto , FumarRESUMO
Several studies have shown fluctuations in the maternal microbiota at various body sites (gut, oral cavity, and vagina). The skin microbiota plays an important role in our health, but studies on the changes during pregnancy are limited. Quantitative and qualitative variations in the skin microbiota in pregnant woman could indeed play important roles in modifying the immune and inflammatory responses of the host. These alterations could induce inflammatory disorders affecting the individual's dermal properties, and could potentially predict infant skin disorder in the unborn. The present study aimed to characterize skin microbiota modifications during pregnancy. For this purpose, skin samples were collected from 52 pregnant women in the first, second, and third trimester of non-complicated pregnancies and from 17 age- and sex-matched healthy controls. The skin microbiota composition was assessed by next generation sequencing (NGS) of the V3-V4 region of the bacterial rRNA 16S. Our results indicate that from the first to the third trimester of pregnancy, changes occur in the composition of the skin microbiota, microbial interactions, and various metabolic pathways. These changes could play a role in creating more advantageous conditions for fetal growth.
RESUMO
Perovskite solar cells (PSCs) offer impressive performance and flexibility, thanks to their simple, low-temperature deposition methods. Their band gap tunability allows for a wide range of applications, transitioning from opaque to transparent devices. This study introduces the first flexible, bifacial PSCs using the FAPbBr3 perovskite. We investigated the impact of optimizing electron and hole transport layers on the cells' bifaciality, transparency, and stability. PSCs achieved a maximum power conversion efficiency (PCE) of 6.8 and 18.7% under 1 sun and indoor light conditions (1200 lx), respectively, showing up to 98% bifaciality factor and an average visible transmittance (AVT) of 55%. Additionally, a P1-P2-P3 laser ablation scheme has been developed on the flexible poly(ethylene terephthalate) (PET) substrate for perovskite solar modules showing a PCE of 4.8% and high geometrical fill factor (97.8%). These findings highlight the potential of flexible, bifacial PSCs for diverse applications such as building-integrated photovoltaics (BIPV), agrivoltaics, automotive technology, wearable sensors, and Internet of things (IoT).
RESUMO
Telecommunications companies are constantly chasing continuous technological advances with their management methods of Operations & Maintenance (O&M) that still struggle to turn their eye toward innovation and simplification of processes. In a future that aims at fully fiber-optic networks, the objective of the research is to propose guidelines and provide data to support the Wholesale Operator for the definition of the acceptable attenuation threshold on the Passive Optical Network Fiber-To-The-Home (PON FTTH) infrastructure to determine the Service Level Agreements (SLA) to be contracted with Retail Operators. Following exceeding the threshold, the Retail Operator has the right to open a Trouble Ticket to request the resolution of the anomaly. Consequently, the definition of the attenuation threshold strongly affects the number of Trouble Tickets to be managed and the related costs the Wholesale Operator bears. This paper analyzes a specific case of the PON FTTH network of the Italian wholesale operator Open Fiber. The studied infrastructure, with a length of 11 km, allows a maximum attenuation of 37 dB without degrading the service. An economic model has been proposed to assess the cost impact of moving the attenuation threshold in the SLA.
RESUMO
Background: Atopic dermatitis (AD) is a chronic inflammatory skin condition whose pathogenesis involves genetic predisposition, epidermal barrier dysfunction, alterations in the immune responses and microbial dysbiosis. Clinical studies have shown a link between Staphylococcus aureus and the pathogenesis of AD, although the origins and genetic diversity of S. aureus colonizing patients with AD is poorly understood. The aim of the study was to investigate if specific clones might be associated with the disease. Methods: WGS analyses were performed on 38 S. aureus strains, deriving from AD patients and healthy carriers. Genotypes (i.e. MLST, spa-, agr- and SCCmec-typing), genomic content (e.g. virulome and resistome), and the pan-genome structure of strains have been investigated. Phenotypic analyses were performed to determine the antibiotic susceptibility, the biofilm production and the invasiveness within the investigated S. aureus population. Results: Strains isolated from AD patients revealed a high degree of genetic heterogeneity and a shared set of virulence factors and antimicrobial resistance genes, suggesting that no genotype and genomic content are uniquely associated with AD. The same strains were characterized by a lower variability in terms of gene content, indicating that the inflammatory conditions could exert a selective pressure leading to the optimization of the gene repertoire. Furthermore, genes related to specific mechanisms, like post-translational modification, protein turnover and chaperones as well as intracellular trafficking, secretion and vesicular transport, were significantly more enriched in AD strains. Phenotypic analysis revealed that all of our AD strains were strong or moderate biofilm producers, while less than half showed invasive capabilities. Conclusions: We conclude that in AD skin, the functional role played by S. aureus may depend on differential gene expression patterns and/or on post-translational modification mechanisms rather than being associated with peculiar genetic features.
Assuntos
Dermatite Atópica , Humanos , Staphylococcus aureus/genética , Tipagem de Sequências Multilocus , Genótipo , PeleRESUMO
Escherichia coli is the bacterial pathogen most frequently associated with mare infertility. Here, we characterized 24 E. coli strains isolated from mares which presented signs of endometritis and infertility from a genotypic and phenotypic point of view. The majority of the isolates belonged to phylogenetic group B1 (9/24, 37.5%). Regarding antibiotic resistance profiles, 10 out of 24 (41.7%) were multidrug-resistant (MDR). Moreover, 17 out of 24 (70.8%) were strong or moderate biofilm producers, and of these eight were MDR strains. Interestingly, 21 out of 24 (87.5%) E. coli strains were phenotypically resistant to ampicillin and 10 of them were also resistant to amoxicillin with clavulanic acid. Regarding the presence of selected virulence factors, 50% of the examined strains carried at least three of them, with fimH detected in all strains, and followed by kpsMTII (11/24, 45.9%). No strain was able to invade HeLa cell monolayers. No relevant differences for all the investigated characteristics were shown by strains that grew directly on plates versus strains requiring the broth-enrichment step before growing on solid media. In conclusion, this work provides new insight into E. coli strains associated with mares' infertility. These results broaden the knowledge of E. coli and, consequently, add useful information to improve prevention strategies and therapeutic treatments contributing to a significant increase in the pregnancy rate in mares.
RESUMO
In this work, we present the fabrication and characterization of bulk-heterojunction solar cells on monolayer graphene (MLG) with nickel-grids (Ni-grid) as semitransparent conductive electrode. The electrodes showed a maximum transmittance of 90% (calculated in 300-800 nm range) and a sheet resistance down to 35 Ω/â¡. On these new anodes, we fabricated TCO free BHJ-SCs using PTB7 blended with PC70BM fullerene derivative as active layer. The best device exhibited a power conversion efficiency (PCE) of 4.2% in direct configuration and 3.6% in inverted configuration. The reference solar cell, realized on the ITO glass substrate, achieved a PCE of 6.1% and 6.7% in direct and inverted configuration respectively; for comparison we also tested OSCs only with simple Ni-grid as semitransparent and conductive electrode, obtaining a low PCE of 0.7%. The proposed approach to realize graphene-based electrodes could be a possible route to reduce the overall impact of the sheet resistance of this type of electrodes allowing their use in several optoelectronic devices.
RESUMO
Electron transport layers (ETLs) play a fundamental role in perovskite solar cells (PSCs) through charge extraction. Here, we developed flexible PSCs on 12 different kinds of ETLs based on SnO2. We show that ETLs need to be specifically developed for plastic substrates in order to attain 15% efficient flexible cells. Recipes developed for glass substrates do not typically transfer directly. Among all the ETLs, ZnO/SnO2 double layers delivered the highest average power conversion efficiency of 14.6% (best cell 14.8%), 39% higher than that of flexible cells of the same batch based on SnO2-only ETLs. However, the cells with a single ETL made of SnO2 nanoparticles were found to be more stable as well as more efficient and reproducible than SnO2 formed from a liquid precursor (SnO2-LP). We aimed at increasing the understanding of what makes a good ETL on polyethylene terephthalate (PET) substrates. More so than ensuring electron transport (as seen from on-current and series resistance analysis), delivering high shunt resistances (R SH) and lower recombination currents (I off) is key to obtain high efficiency. In fact, R SH of PSCs fabricated on glass was twice as large, and I off was 76% lower in relative terms, on average, than those on PET, indicating considerably better blocking behavior of ETLs on glass, which to a large extent explains the differences in average PCE (+29% in relative terms for glass vs PET) between these two types of devices. Importantly, we also found a clear trend for all ETLs and for different substrates between the wetting behavior of each surface and the final performance of the device, with efficiencies increasing with lower contact angles (ranging between â¼50 and 80°). Better wetting, with average contact angles being lower by 25% on glass versus PET, was conducive to delivering higher-quality layers and interfaces. This cognizance can help further optimize flexible devices and close the efficiency gap that still exists with their glass counterparts.
RESUMO
Most laboratories employ spin coating with application of antisolvent to achieve high efficiency in perovskite solar cells. However, this method wastes a lot of material and is not industrially usable. Conversely, large area coating techniques such as blade and slot-die require high precision engineering both for deposition of ink and for gas or for electromagnetic drying procedures that replace, out of necessity, anti-solvent engineering. Here we present a simple and effective method to deposit uniform high-quality perovskite films with a piece of paper as an applicator at low temperatures. We fabricated solar cells on flexible PET substrates manually with 11% power conversion efficiency. Deposition after soaking the sheet of paper in a green antisolvent improved the efficiency by 82% compared to when using dry paper as applicator. This new technique enables manual film deposition without any expensive equipment and has the potential to be fully automated for future optimization and exploitation.
RESUMO
In recent decades, Acinetobacter baumannii emerged as a major infective menace in healthcare settings due to scarce therapeutic options to treat infections. Therefore, undertaking genome comparison analyses of multi-resistant A. baumannii strains could aid the identification of key bacterial determinants to develop innovative anti-virulence approaches. Following genome sequencing, we performed a molecular characterization of key genes and genomic comparison of two A. baumannii strains, #36 and #150, with selected reference genomes. Despite a different antibiotic resistance gene content, the analyzed strains showed a very similar antibiogram profile. Interestingly, the lack of some important virulence determinants (i.e., bap, ata and omp33-36) did not abrogate their adhesive abilities to abiotic and biotic surfaces, as reported before; indeed, strains retained these capacities, although to a different extent, suggesting the presence of distinct vicarious genes. Conversely, secretion systems, lipopolysaccharide (LPS), capsule and iron acquisition systems were highly similar to A. baumannii reference strains. Overall, our analyses increased our knowledge on A. baumannii genomic content and organization as well as the genomic events occurring in nosocomial isolates to better fit into changing healthcare environments.
Assuntos
Infecções por Acinetobacter , Acinetobacter baumannii , Infecções por Acinetobacter/tratamento farmacológico , Infecções por Acinetobacter/microbiologia , Acinetobacter baumannii/genética , Antibacterianos/farmacologia , Antibacterianos/uso terapêutico , Farmacorresistência Bacteriana/genética , Farmacorresistência Bacteriana Múltipla/genética , Variação Genética , Humanos , Testes de Sensibilidade Microbiana , Virulência/genéticaRESUMO
Perovskite solar modules (PSMs) have been attracting the photovoltaic market, owing to low manufacturing costs and process versatility. The employment of flexible substrates gives the chance to explore new applications and further increase the fabrication throughput. However, the present state-of-the-art of flexible perovskite solar modules (FPSMs) does not show any data on light-soaking stability, revealing that the scientific community is still far from the potential marketing of the product. During this work, we demonstrate, for the first time, an outstanding light stability of FPSMs over 1000 h considering the recovering time (T80 = 730 h), exhibiting a power conversion efficiency (PCE) of 10.51% over a 15.7 cm2 active area obtained with scalable processes by exploiting blade deposition of a transporting layer and a stable double-cation perovskite (cesium and formamidinium, CsFA) absorber.
RESUMO
Flexible perovskite solar cells (FPSCs) are prime candidates for applications requiring a highly efficient, low-cost, lightweight, thin, and even foldable power source. Despite record efficiencies of lab-scale flexible devices (19.5% on a 0.1 cm2 area), scalability represents a critical factor toward commercialization of FPSCs. Large-area automized deposition techniques and efficient laser scribing procedures are required to enable a high-throughput production of flexible perovskite modules (FPSMs), with the latter being much more challenging compared to glass substrates. In this work, we introduce the combined concept of laser scribing optimization and automatized spray-coating of SnO2 layers. Based on a systematic variation of the incident laser power and a comprehensive morphological and electrical analysis of laser-based cell interconnections, optimal scribing parameters are identified. Furthermore, spray-coating is used to deposit uniform compact SnO2 films on large-area (>120 cm2) plastic substrates. FPSCs with spray-coated SnO2 show comparable performance as spin-coated cells, delivering up to 15.3% efficiency on small areas under 1 sun illumination. When upscaling to large areas, FPSMs deliver 12% power conversion efficiency (PCE) and negligible hysteresis on 16.8 cm2 and 11.7% PCE on a 21.8 cm2 active area. Our perovskite devices preserved 78% efficiency when the active area increased from 0.1 to 16.8 cm2, demonstrating that our combined approach is an effective strategy for large-area manufacturing of perovskite devices on flexible substrates.
RESUMO
Long-term stability of perovskite solar cells (PSCs) is one of the main issues to be solved for forthcoming commercialization of this technology. In this work, thermosetting polyurethane (PU)-based resins are proposed as effective encapsulants for perovskite solar cells to prevent degradation caused by both moisture and oxygen. Application consists of drop-casting the precursor mixture directly over the devices followed by in situ polymerization, avoiding the use of other adhesives. PUs are cost-effective, lightweight, thermal, and light-stable materials whose mechanical, chemical, and physical properties can be easily tuned by thoughtful choice of their precursor. Encapsulated PSCs show extremely good stability when stored under ambient light (maximum, 1000 lux), controlled humidity (28-65%), and temperature (18-30 °C) by retaining 94% of the initial power conversion efficiency after 2500 h (4 months), whereas control devices lose 90% of their performance after 500 h (T80 = 37 h); once stored according to ISOS-D-1, PU-protected devices showed T80 > 1200 h. Encapsulated devices are stable even when immersed in pure water. The demonstration of PUs as promising solution-processed encapsulant materials for PSCs can pave the way for these to become a cost-effective encapsulation route alternative for future industrialization of this technology.
RESUMO
A study of the photonic flash sintering of a silver nanoparticle ink printed as the back electrode for organic solar cells is presented. A number of sintering settings with different intensities and pulse durations have been tested on both full-area and grid-based silver electrodes, using the complete emission spectrum of the flash lamps from UV-A to NIR. However, none of these settings was able to produce functional devices with performances comparable to those of reference cells prepared using thermally sintered ink. Different degradation mechanisms were detected in the devices with a flash-sintered back electrode. The P3HT:PCBM photoactive layer appears to be highly heat-sensitive and turned out to be severely damaged by the high temperatures generated in the silver layer during the sintering. In addition, UV-induced photochemical degradation of the functional materials was identified as another possible source of performance deterioration in the devices with grid-based electrodes. Reducing the light intensity does not provide a proper solution because in this case the Ag electrode is not sintered sufficiently. For both types of devices, with full-area and grid-based electrodes, these problems could be solved by excluding the short wavelength contribution from the flash light spectrum using a filter. Optimized sintering parameters allowed manufacture of OPV devices with performance equal to those of the reference devices. Photonic flash sintering of the top electrode in organic solar cells was demonstrated for the first time. It reveals the great potential of this sintering method for the future roll-to-roll manufacturing of organic solar cells from solution.