Carbon Dioxide Electroreduction and Formic Acid Oxidation by Formal Nickel(I) Complexes of Di-isopropylphenyl Bis-iminoacenaphthene.

Processing CO2 into value-added chemicals and fuels stands as one of the most crucial tasks in addressing the global challenge of the greenhouse effect. In this study, we focused on the complex (dpp-bian)NiBr2 (where dpp-bian is di-isopropylphenyl bis-iminoacenaphthene) as a precatalyst for the electrochemical reduction of CO2 into CH4 as the sole product. Cyclic voltammetry results indicate that the realization of a catalytically effective pattern requires the three-electron reduction of (dpp-bian)NiBr2. The chemically reduced complexes [K(THF)6]+[(dpp-bian)Ni(COD)]- and [K(THF)6]+[(dpp-bian)2Ni]- were synthesized and structurally characterized. Analyzing the data from the electron paramagnetic resonance study of the complexes in solutions, along with quantum-chemical calculations, reveals that the spin density is predominantly localized at their metal centers. The superposition of trajectory maps of the electron density gradient vector field ∇ ρ r ${\nabla \rho \left({\bf r}\right)}$ and the electrostatic force density field F e s r ${{{\bf F}}_{{\rm e}{\rm s}}\left({\bf r}\right)}$ per electron, as well as the atomic charges, discloses that, within the first coordination sphere, the interatomic charge transfer occurs from the metal atom to the ligand atoms and that the complex anions can thus be formally described by the general formulae (dpp-bian)2-Ni+(COD) and (dpp-bian)2 -Ni+. It was also shown that the reduced nickel complexes can be oxidized by formic acid; resulting from this reaction, the two-electron and two-proton addition product dpp-bian-2H is formed.

Non-Noble-Metal Mono and Bimetallic Composites for Efficient Electrocatalysis of Phosphine Oxide and Acetylene C-H/P-H Coupling under Mild Conditions.

The present work describes an efficient reaction of electrochemical phosphorylation of phenylacetylene controlled by the composition of catalytic nanoparticles based on non-noble-metals. The sought-after products are produced via the simple synthetic protocol based on room temperature, atom-economical reactions, and silica nanoparticles (SNs) loaded by one or two d-metal ions as nanocatalysts. The redox and catalytic properties of SNs can be tuned with a range of parameters, such as compositions of the bimetallic systems, their preparation method, and morphology. Monometallic SNs give phosphorylated acetylene with retention of the triple bond, and bimetallic SNs give a bis-phosphorylation product. This is the first example of acetylene and phosphine oxide C-H/P-H coupling with a regenerable and recyclable catalyst.

Chemical and Electrochemical Reductions of Monoiminoacenaphthenes.

Redox properties of monoiminoacenaphthenes (MIANs) were studied using various electrochemical techniques. The potential values obtained were used for calculating the electrochemical gap value and corresponding frontier orbital difference energy. The first-peak-potential reduction of the MIANs was performed. As a result of controlled potential electrolysis, two-electron one-proton addition products were obtained. Additionally, the MIANs were exposed to one-electron chemical reduction by sodium and NaBH4. Structures of three new sodium complexes, three products of electrochemical reduction, and one product of the reduction by NaBH4 were studied using single-crystal X-ray diffraction. The MIANs reduced electrochemically by NaBH4 represent salts, in which the protonated MIAN skeleton acts as an anion and Bu4N+ or Na+ as a cation. In the case of sodium complexes, the anion radicals of MIANs are coordinated with sodium cations into tetranuclear complexes. The photophysical and electrochemical properties of all reduced MIAN products, as well as neutral forms, were studied both experimentally and quantum-chemically.

Composing NLO Chromophore as a Puzzle: Electrochemistry-based Approach to Design and Effectiveness.

A series of D-π-A, D-π-D'-π-A, D-π-A'-π-A nonlinear optical chromophores with vinylene π-electron bridges or bridges with π-deficient/π-excessive heterocyclic moieties along with the corresponding precursors D-vinylene, D-π-D', D'-π-A, D-π-A' and A'-π-A are synthesized and studied both experimentally and computationally. The effect of the heterocycle in the π-electron bridge on the oxidation/reduction potentials and the energy gap (ΔEel ) is investigated in detail. The properties of the D-π-A'(D')-π-A chromophores are shown to correlate with those of building blocks: the oxidation potential is determined by the D-vinylene, and the reduction potential is determined by A'(D')-π-A truncated compounds. The contribution of the acceptor to the oxidation potential of chromophores in comparison with those of the precursors was estimated and analyzed in terms of electronic communication between the end groups. A good correlation between the ΔEel and the chromophores' first hyperpolarizability is revealed.

Electrochemical Insight into Mechanisms and Metallocyclic Intermediates of C-H Functionalization.

Transition metal-catalyzed C-H activation has emerged as a powerful tool in organic synthesis and electrosynthesis as well as in the development of new methodologies for producing fine chemicals. In order to achieve efficient and selective C-H functionalization, different strategies have been used to accelerate the C-H activation step, including the incorporation of directing groups in the substrate that facilitate coordination to the catalyst. In this review, we try to underscore that the understanding the mechanisms of the catalytic cycle and the reactivity or redox activity of the key metal cyclic intermediates in these reactions is the basis for controlling the selectivity of synthesis and electrosynthesis. Combination of the electrosynthesis and voltammetry with traditional synthetic and physico-chemical methods allows one to achieve selective transformation of C-H bonds to functionalized C-C or C-X (X=heteroatom or halogen) bonds which may encourage organic chemists to use it in the future more often. The possibilities and the benefits of electrochemical techniques are analyzed and summarized.

Synthesis of fullerenyl-1,2,3-triazoles by reaction of fullerenyl azide with terminal acetylenes.

Fullerenyltriazoles were synthesized by the interaction of azidofullerene with terminal acetylenes, in which the heterocyclic fragment is directly attached to the fullerene core. The electrochemical studies of the synthesized triazole-containing fullerenes have proved that the potentials of the first reduction peaks are shifted to a less cathodic region compared to unmodified C60. According to theoretical calculations, synthesized fullerene C60 derivatives can be considered as promising acceptor components of organic solar cells.

A Water-Soluble Sodium Pectate Complex with Copper as an Electrochemical Catalyst for Carbon Dioxide Reduction.

A selective noble-metal-free molecular catalyst has emerged as a fruitful approach in the quest for designing efficient and stable catalytic materials for CO2 reduction. In this work, we report that a sodium pectate complex of copper (PG-NaCu) proved to be highly active in the electrocatalytic conversion of CO2 to CH4 in water. Stability and selectivity of conversion of CO2 to CH4 as a product at a glassy carbon electrode were discovered. The copper complex PG-NaCu was synthesized and characterized by physicochemical methods. The electrochemical CO2 reduction reaction (CO2RR) proceeds at -1.5 V vs. Ag/AgCl at ~10 mA/cm2 current densities in the presence of the catalyst. The current density decreases by less than 20% within 12 h of electrolysis (the main decrease occurs in the first 3 h of electrolysis in the presence of CO2). This copper pectate complex (PG-NaCu) combines the advantages of heterogeneous and homogeneous catalysts, the stability of heterogeneous solid materials and the performance (high activity and selectivity) of molecular catalysts.

Generation of a Hetero Spin Complex from Iron(II) Iodide with Redox Active Acenaphthene-1,2-Diimine.

The reaction of the redox active 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene (dpp-BIAN) and iron(II) iodide in acetonitrile led to a new complex [(dpp-BIAN)FeIII2] (1). Molecular structure of 1 was determined by the single crystal X-ray diffraction analysis. The spin state of the iron cation in complex 1 at room temperature and the magnetic behavior of 1 in the temperature range of 2-300 K were studied using Mossbauer spectroscopy and magnetic susceptibility measurements, respectively. The neutral character of dpp-BIAN in 1 was confirmed by IR and UV spectroscopy. The electrochemistry of 1 was studied in solution and solid state using cyclic voltammetry. The generation of the radical anion form of the dpp-BIAN ligand upon reduction of 1 in a CH2Cl2 solution was monitored by EPR spectroscopy.

[(MeCN)Ni(CF3)3]- and [Ni(CF3)4]2-: Foundations toward the Development of Trifluoromethylations at Unsupported Nickel.

Nickel anions [(MeCN)Ni(CF3)3]- and [Ni(CF3)4]2- were prepared by the formal addition of 3 and 4 equiv, respectively, of AgCF3 to [(dme)NiBr2] in the presence of the [PPh4]+ counterion. Detailed insights into the electronic properties of these new compounds were obtained through the use of density functional theory (DFT) calculations, spectroscopy-oriented configuration interaction (SORCI) calculations, X-ray absorption spectroscopy, and cyclic voltammetry. The data collectively show that trifluoromethyl complexes of nickel, even in the most common oxidation state of nickel(II), are highly covalent systems whereby a hole is distributed on the trifluoromethyl ligands, surprisingly rendering the metal to a physically more reduced state. In the cases of [(MeCN)Ni(CF3)3]- and [Ni(CF3)4]2-, these complexes are better physically described as d9 metal complexes. [(MeCN)Ni(CF3)3]- is electrophilic and reacts with other nucleophiles such as phenoxide to yield the unsupported [(PhO)Ni(CF3)3]2- salt, revealing the broader potential of [(MeCN)Ni(CF3)3]- in the development of "ligandless" trifluoromethylations at nickel. Proof-in-principle experiments show that the reaction of [(MeCN)Ni(CF3)3]- with an aryl iodonium salt yields trifluoromethylated arene, presumably via a high-valent, unsupported, and formal organonickel(IV) intermediate. Evidence of the feasibility of such intermediates is provided with the structurally characterized [PPh4]2[Ni(CF3)4(SO4)], which was derived through the two-electron oxidation of [Ni(CF3)4]2-.

Synthesis and Structure of Iron (II) Complexes of Functionalized 1,5-Diaza-3,7-Diphosphacyclooctanes.

In order to synthesize new iron (II) complexes of 1,5-diaza-3,7-diphosphacyclooctanes with a wider variety of the substituents on ligands heteroatoms (including functionalized ones, namely, pyridyl groups) and co-ligands, it was found that these ligands with relatively small phenyl, benzyl, and pyridin-2-yl substituents on phosphorus atoms in acetonitrile formed bis-P,P-chelate cis-complexes [L2Fe(CH3CN)2]2+ (BF4)2-, whereas P-mesityl-substituted ligand formed only monoligand P,P-complex [LFe(CH3CN)4]2+ (BF4)2-. 3,7-dibenzyl-1,5-di(1'-(R)-phenylethyl)-1,5-diaza-3,7-diphosphacyclooctane reacted with hexahydrate of iron (II) tetrafluoroborate in acetone to give an unusual bis-ligand cationic complex of the composition [L2Fe(BF4)]+ BF4-, where two fluorine atoms of the tetrafluoroborate unit occupied two pseudo-equatorial positions at roughly octahedral iron ion, according to X-ray diffraction data. 1,5-diaza-3,7-diphosphacyclooctanes replaced tetrahydrofurane and one of the carbonyl ligands of cyclopentadienyldicarbonyl(tetrahydrofuran)iron (II) tetrafluoroborate to form heteroligand complexes [CpFeL(CO)]+BF4-. The structural studies in the solid phase and in solutions showed that diazadiphosphacyclooctane ligands of all complexes adopted chair-boat conformations so that their nitrogen atoms were in close proximity to the central iron ion. The redox properties of the obtained complexes were performed by the cyclic voltammetry method.

Electrochemical Properties and Structure of Multi-Ferrocenyl Phosphorus Thioesters.

The reaction of triferrocenylthiophosphite with elemental sulfur leads to triferrocenyltetrathiophosphate. The molecule of tetrathiophosphate adopts propeller-like all synclinal-conformation of the ferrocenyl fragments respective to the P=S bond. All ferrocenyl groups have nearly ideal eclipsed conformation of the cyclopentadienyl fragments. The Fc3S3P (1), Fc3S3P=O, (2) and Fc3S3P=S (3) demonstrate three reversible and well-separated ferrocenyl-based redox events. The electronic structures of 1-3 have been studied quantum-chemically; the energies and composition of frontier orbitals have been calculated.

One-Electron Reduction of 2-Mono(2,6-diisopropylphenylimino)acenaphthene-1-one (dpp-mian).

The electrochemical characteristics of 2-mono(2,6-diisopropylphenylimino)acenaphthene-1-one (dpp-mian) have been investigated. One-electron reduction of dpp-mian involves the iminoketone fragment, which is revealed by the EPR spectrum obtained after the electrolysis of the dpp-mian solution in tetrahydrofuran (THF). The reduction of dpp-mian with one equivalent of metallic potassium leads to a similar EPR spectrum. The sodium complex [(dpp-mian)Na(dme)]2 (1) produces an EPR signal with hyperfine coupling on the nitrogen atom of the iminoketone fragment of the dpp-mian ligand. Dpp-mian can also be reduced in a one-electron process by SnCl2 ×(dioxane). In this case, complex (dpp-mian)2 SnCl2 (2) is formed, with the tin atom displaying an oxidation state of +4. Tin(II) chloride dihydrate, SnCl2 ×2(H2 O), also reduces dpp-mian, but the two ligands bound to tin in the product form a new carbon-carbon bond between the ketone moieties of the dpp-mian monoanions to form complex (bis-dpp-mian)HSnCl3 (3). Metallic tin reduces dpp-mian to form the (bis-dpp-mian)2 Sn (4) species. Compounds 1-4 were characterized by X-ray diffraction.

Synthesis and Electrochemical Properties of Fullerenylstyrenes.

An efficient preparative method was developed for the synthesis of previously unreported fullerenylstyrenes based on the reaction of C60 fullerene with terminal acetylenes and EtMgBr in the presence of Ti(Oi-Pr)4. The voltammetric curves of the prepared fullerenylstyrenes were studied, and good prospects for their application as acceptor materials for bulk heterojunction solar cell were demonstrated.

Evaluation of Transition Metal Catalysts in Electrochemically Induced Aromatic Phosphonation.

Voltammetry provides important information on the redox properties of catalysts (transition metal complexes of Ni, Co, Mn, etc.) and their activity in electrocatalytic reactions of aromatic C-H phosphonation in the presence of a phosphorus precursor, for example, dialkyl-H-phosphonate. Based on catalytic current growth of oxidation or reduction of the metal catalysts (CoII, MnII, NiII, MnII/NiII, MnII/CoII, and CoII/NiII), quantitative characteristics of the regeneration of catalysts were determined, for example, for MnII, NiII and MnII/NiII, CoII/NiII pairs. Calculations confirmed the previously made synthetic observations on the synergistic effect of certain metal ions in binary catalytic systems (MnIIbpy/NiIIbpy and NiIIbpy/CoIIbpy); for mixtures, the observed rate constants, or TOF, were 690 s-1 and 721 s-1, respectively, and product yields were higher for monometallic catalytic systems (up to 71% for bimetallic catalytic systems and ~30% for monometallic catalytic systems). In some cases, the appearance of pre-waves after adding H-phosphonates confirmed the preceding chemical reaction. It also confirmed the formation of metal phosphonates in the time scale of voltammetry, oxidizing or reducing at lower potentials than the original (RO)2P(O)H and metal complex, which could be used for fast diagnostics of metal ion and dialkyl-H-phosphonate interactions. Electrochemical transfer of an electron to (from) metal phosphonate generates a phosphonyl radical, which can then react with different arenes to give the products of aromatic C-H phosphonation.

Ferrocene-Containing Sterically Hindered Phosphonium Salts.

The synthesis and physical properties of the series of the ferrocenyl-containing sterically hindered phosphonium salts based on di(tert-butyl)ferrocenylphosphine is reported. Analysis of voltamogramms of the obtained compounds revealed some correlations between their structures and electrochemical properties. The elongation of the alkyl chain at the P atom as well as replacement of the Br- anion by [BF4]- shifts the ferrocene/ferrocenium transition of the resulting salts into the positive region. DFT results shows that in the former case, the Br- anion destabilizes the corresponding ion pair, making its oxidation easier due to increased highest occupied molecular orbital (HOMO) energy. Increased HOMO energy for ion pairs with the Br- ion compared to BF4- are caused by contribution of bromide atomic orbitals to the HOMO. The observed correlations can be used for fine-tuning the properties of the salts making them attractive for applications in multicomponent batteries and capacitors.

New functional cyclic aminomethylphosphine ligands for the construction of catalysts for electrochemical hydrogen transformations.

Eight-membered cyclic functional bisphosphines, namely 1,5-di-aryl-3,7-di(2-pyridyl)-1,5-diaza-3,7-diphosphacyclooctanes (aryl=2-pyridyl, m-tolyl, p-tolyl, diphenylmethyl, benzyl, (R)-(+)-(α-methyl)benzyl), with 2-pyridyl substituents on the phosphorus atoms have been synthesized by condensation of 2-pyridylphosphine, formaldehyde, and the corresponding primary amine. The structures of some of these bisphosphines have been investigated by X-ray crystallography. The bisphosphines readily form neutral P,P-chelate complexes [(κ(2)-P,P-L)MCl2], cationic bis-P,P-chelate complexes [(κ(2)-P,P-L)2 M](2+), or a five-coordinate complex [(κ(2)-P,P-L)2 NiBr]Br. The electrochemical behavior of two of the nickel complexes, and their catalytic activities in electrochemical hydrogen evolution and hydrogen oxidation, including the fuel-cell test, have been studied.

N,N'-fused bisphosphole: heteroaromatic molecule with two-coordinate and formally divalent phosphorus. Synthesis, electronic structure, and chemical properties.

The reduction of 6,12-dichloro-1,2,3,4,7,8,9,10-octahydro-6H,12H-[1,2,3]benzodiazaphospholo[2,1-a][1,2,3]benzodiazaphosphole (3) by metallic magnesium in tetrahydrofuran (THF) affords the N,N'-fused bisphosphole 1 in 92% yield. The compound reveals a novel type of 10π-electron heteroaromatic system [NICS(0) = -11.4], containing a two-coordinate and formally divalent phosphorus atom. Compound 1 possesses a much higher coordination activity than many other diazaphospholes. This is caused by a novel type of complexation to a metal ion wherein the lone phosphorus pairs are not involved in metal coordination. Instead, the 10π-electron heteroaromatic system provides two electrons for P → M bond formation. Polarization of the ligand results in the formation of extended molecular associates or cluster compounds. Complexes of 1 with mercury dichloride [{(1)3HgCl}2(µ6-Cl)](+)Cl(-) (7) and tin dichlorides [1·SnCl2(PhMe solvate)] (8a) and [1·SnCl2] (8b) are, in fact, supramolecular in nature, containing multiple intermolecular short contacts. Crystals of complex 8a containing short Sn···Sn packing interactions were converted reversibly to metallic tin after workup with THF. The simple mixing of 1 and 3 (1:1) gave a P-P bridging dimeric species prone to easy dissociation. The addition of GeCl2(diox) to the equimolar mixture of 1 and 3 shifted the equilibrium to the formation of a poorly soluble salt-like dimer 6, which is, in fact, a stacked 18π-electron dication having a through-space delocalization of π electrons.

Synthesis and reactivity of new aminophenolate complexes of nickel.

New well-defined, paramagnetic nickel complexes have been prepared and characterized by X-ray crystallography. The complexes were found to be active for the cross-coupling of alkyl electrophiles (especially ethyl 2-bromobutyrate) with alkyl Grignard reagents. The ligand architecture in these new complexes could potentially be rendered chiral, opening up future possibilities for performing asymmetric cross-coupling reactions.

Proton-assisted seven-electron acceptor properties of di-iso-propylphenyl-bis-iminoacenaphthene.

Herein, we report the record-breaking seven-electron reduction of di-iso-propylphenyl-bis-iminoacenaphthene (dpp-bian) involving protons under chemical and electrochemical reduction conditions. Using the dpp-bian-H2 compound as a starting reagent, its mono- and trisodium salts were obtained. A voltammetric study showed that the trinuclear sodium salt can accept an additional seventh electron upon electrochemical reduction.

Cobalt(II) coordination to an N4-acenaphthene-based ligand and its sodium complex.

A new bifunctional N4-ligand was obtained via the condensation reaction of acenaphthenequinone and 2-picolylamine. A peculiarity of this synthesis is the formation of a new intramolecular C-C bond during the reaction. The structure and redox properties of the ligand were studied. The anion-radical form of the ligand was prepared via the chemical reduction of the latter with metallic sodium as well as in situ via its electrochemical reduction in a solution. The sodium salt prepared was structurally characterized using single-crystal X-ray diffraction (XRD). New cobalt complexes with the ligand in neutral and anion-radical forms were synthesized and further studied. As a result, three new homo- and heteroleptic cobalt(II) complexes were obtained, in which the cobalt atom demonstrates different modes of coordination with the ligand. Cobalt(II) complex CoL2 with two monoanionic ligands was prepared by the electrochemical reduction of a related L2CoBr2 complex or by treating cobalt(II) bromide with the sodium salt. XRD was used to study the structures of all cobalt complexes prepared. Magnetic and electron paramagnetic resonance studies were performed: CoII ion states with S = 3/2 and S = 1/2 were found for the complexes. A quantum-chemical study confirmed that the spin density is mainly located at the cobalt center.