Exploring the application limits of different hold-up time markers in supercritical fluid chromatography.

The study focuses on the application range of nitrous oxide as a hold-up time marker in supercritical fluid chromatography (SFC). This compound has been suggested a decade ago to be used as unretained marker, something that the field of SFC was missing for a long time, since its beneficial properties make it an ideal candidate as hold-up time marker. Determination of the hold-up volume and actual volumetric flow rates have always been problematic in SFC due to the compressibility of carbon dioxide and one part of this is the difficulty of hold-up time measurements. Depending on the mobile phase, different methods have been used to measure the hold-up time with varying results. Nitrous oxide and other molecules have been compared in different conditions, mobile phases and stationary phases. In all cases, nitrous oxide gave the lowest elution times. However, detection was difficult in mobile phases containing 10% or more of organic modifier, because most solvents mask the signal of nitrous oxide. Interestingly, the choice of stationary phase also had a slight effect on detection, while different pressure and temperature settings affected each compound in a different manner.

Investigating the effect of polarity of stationary and mobile phases on retention of cannabinoids in normal phase liquid chromatography.

This work reports about a screening of four adsorbents with different polarity employed for the separation of the main phytocannabinoids contained in Cannabis sativa L., under normal phase liquid chromatography (NPLC). The effect of polarity and type of interaction mechanisms of the adsorbents (namely Si-, CN-, Diol-, and NH2-based SPs) on retention has been investigated under a variety of conditions either by using different combinations of apolar solvents (heptane or hexane) and alcohols (ethanol or isopropanol). The columns have also been employed for the separation of a real cannabis sample. Graphical Abstract Investigating the effect of polarity of stationary and mobile phases on retention of cannabinoids in normal phase liquid chromatography.

Downstream Processing of Therapeutic Peptides by Means of Preparative Liquid Chromatography.

The market of biomolecules with therapeutic scopes, including peptides, is continuously expanding. The interest towards this class of pharmaceuticals is stimulated by the broad range of bioactivities that peptides can trigger in the human body. The main production methods to obtain peptides are enzymatic hydrolysis, microbial fermentation, recombinant approach and, especially, chemical synthesis. None of these methods, however, produce exclusively the target product. Other species represent impurities that, for safety and pharmaceutical quality reasons, must be removed. The remarkable production volumes of peptide mixtures have generated a strong interest towards the purification procedures, particularly due to their relevant impact on the manufacturing costs. The purification method of choice is mainly preparative liquid chromatography, because of its flexibility, which allows one to choose case-by-case the experimental conditions that most suitably fit that particular purification problem. Different modes of chromatography that can cover almost every separation case are reviewed in this article. Additionally, an outlook to a very recent continuous chromatographic process (namely Multicolumn Countercurrent Solvent Gradient Purification, MCSGP) and future perspectives regarding purification strategies will be considered at the end of this review.

Retention mechanism on phosphodiester stationary phases in hydrophilic interaction liquid chromatography and purely aqueous mobile phase part II: Overloading with limited soluble samples.

The adsorption behaviour of caffeine and theophylline under hydrophilic interaction chromatography and purely aqueous conditions was investigated on four phosphodiester stationary phases. Solute adsorption isotherms were determined by frontal analysis or inverse method. The bi-Langmuir model was found to be the best choice to describe the behaviour of caffeine and theophylline adsorption in purely aqueous conditions, whereas the bi-Moreau model describes the adsorption phenomena in HILIC conditions. The results obtained demonstrate that the interaction of caffeine and theophylline with the stationary phase surface varies depending on the mobile phase composition. Both in pure aqueous mobile phase and in HILIC mode, the heterogeneity of the surface of the studied stationary phases is confirmed. In hydrophilic solutions, the sample molecules interact with the stationary phase only. In hydrophobic conditions, a lateral interaction occurs between caffeine or theophylline molecules, which are poorly soluble in acetonitrile-rich solvents. This confirms that the same compound on the same stationary phase can behave rather differently, depending on the mobile phase composition. Thus, the mobile phase may govern and control the retention mechanism.

Investigation of retention behavior of natural cannabinoids on differently substituted polysaccharide-based chiral stationary phases under reversed-phase liquid chromatographic conditions.

The growing popularity of cannabis products and recent legalization of cannabis for recreational purposes have contributed to the increase of the demand for analytical methods able to give a detailed characterization of cannabis samples and derivatives. In this context, one of the aspects that is strongly emerging is about the hazardous potential of uncharacterised minor cannabinoids, including chiral ones, for which achiral potency testing methods currently employed do not give any information. For this reason, there is a growing interest towards the development of liquid chromatographic methods for the enantioseparation of cannabinoids. Much work is needed in this field where one of the major limitations is the lack of optically pure standards. This manuscript reports about the chromatographic behavior of five popular cannabinoids (including the cannabichromene racemate, CBC) on nine immobilised polysaccharide-based chiral stationary phases (CSPs) differently substituted, under reversed phase conditions. Results showed that chemo-selectivity of CSPs is not affected by changes in mobile phase composition, in the range of mobile phase investigated. In addition, the presence of electron withdrawing groups on the CSPs systematically leads to shorter retention times compared to when electron donating groups are present. An application of separation of cannabinoids from a real hemp extract on two of the chiral columns employed in this work revealed the presence of both CBC enantiomers in the sample.

Mass transfer kinetics on modern Whelk-O1 chiral stationary phases made on fully- and superficially-porous particles.

In this work, a detailed study of mass transfer properties of trans-stilbene oxide (TSO) enantiomers on two Whelk-O1 chiral stationary phases (CSPs) has been performed. The CSPs were prepared by using both fully-porous silica particles of 2.5 µm particle diameter and superficially-porous ones of 2.6 µm particle diameter as base materials. By combining stop-flow and dynamic measurements in normal-phase conditions, the different contributions to mass transfer have been estimated. The study of intraparticle diffusion has revealed that the adsorption of both enantiomers is localized (i.e., characterized by absence of surface diffusion). The determination of thermodynamic binding constants (measured through adsorption isotherms) supports this finding.

Potency testing of cannabinoids by liquid and supercritical fluid chromatography: Where we are, what we need.

Hemp and cannabis industry is undergoing a renewed interest due to legalization of marijuana (a topic that all countries are discussing, especially in recent years) and the growing importance of therapeutic properties of cannabinoids. Together with an increment in the production of hemp and recreational cannabis, there has been an increasing demand for accurate potency testing of products (i.e. quantification of main cannabinoids present in the plant in terms of weight percentage) prior commercialization. This translates in an urgent need of reliable analytical methods to characterize cannabis and hemp samples. Cannabis and hemp preparations are commercialized under various forms (e.g., flowers, oils, candies or even baked goods) usually containing a large number of often very similar compounds making their separation very challenging. Strictly connected to this, another emerging topic concerns the need for the developing of large scale separation techniques for the purification of cannabinoids from complex matrices and for the preparation of analytical-grade standards (including the chiral ones). This paper reviews the most recent achievements in both these aspects. Cutting-edge applications and novel opportunities in potency testing by high performance liquid chromatography (HPLC) with UV detection (which is becoming the golden standard, according to several pharmacopeias, for this kind of measurements) are discussed. The focus has been given to the very important topic of enantio-discrimination of chiral cannabinoids, for which supercritical fluid chromatography (SFC) appears to be particularly suitable. The last part of the work covers the purification of cannabinoids through preparative chromatography. In this regard, particular attention has been given to the most innovative multi-column techniques allowing for the continuous purification of target molecules. The most recent advancements and future challenges in this field are discussed.

From batch to continuous chromatographic purification of a therapeutic peptide through multicolumn countercurrent solvent gradient purification.

A twin-column Multicolumn Countercurrent Solvent Gradient Purification (MCSGP) process has been developed for the purification of a therapeutic peptide, glucagon, from a crude synthetic mixture. This semi-continuous process uses two identical columns operating either in interconnected or in batch mode, thus enabling the internal recycle of the portions of the eluting stream which do not comply with purity specifications. Because of this feature, which actually results in the simulated countercurrent movement of the stationary phase with respect to the mobile one, the yield-purity trade-off typical of traditional batch preparative chromatography can be alleviated. Moreover, the purification process can be completely automatized. Aim of this work is to present a simple procedure for the development of the MCSGP process based on a single batch experiment, in the case of a therapeutic peptide of industrial relevance. This allowed to recover roughly 90% of the injected glucagon in a purified pool with a purity of about 90%. A comparison between the performance of the MCSGP process and the classical single column batch process indicates that percentage increase in the recovery of target product is +23% when transferring the method from batch conditions to MCSGP, with an unchanged purity of around 89%. This improvement comes at the expenses of a reduction of about 38% in productivity.