Stemless Shoulder Arthroplasty.

Stemless humeral components for shoulder arthroplasty represent the fourth generation of modern prosthetic shoulder implants. Because of their metaphyseal fixation, the implantation technique is rather straightforward and preserves the humeral canal from violation. Substantial benefits have been highlighted with such a design, including less perioperative morbidity, independence from the proximal humeral anatomy, preservation of bone stock, ease of potential revision surgeries, and limited risk of complex periprosthetic fractures. Initially conceived to better re-create the center of rotation of the humeral head in anatomic arthroplasties, their use has been successfully extended to reverse total shoulder arthroplasty. Provided that contraindications are respected (eg, poor proximal humeral bone quality, proximal humerus fractures, patients who are elderly and/or overweight), short-term and midterm functional outcomes as well as postoperative complications appear to be similar to those of traditional stemmed implants, without increased risk of loosening of the humeral component.

Clinical and radiographic outcomes of a transosseous suture technique for displaced lateral clavicle fractures.

BACKGROUND: The purpose of this study was to evaluate the clinical and radiographic outcomes of a transosseous suture fixation technique for the treatment of unstable lateral clavicle fractures. The appropriate treatment for lateral clavicle fractures is controversial. Many authors have argued for nonsurgical treatment of these injuries; however, recent literature has shown a role for the surgical treatment of unstable fractures. The paucity of lateral clavicular bone and the unique anatomy of this area of the shoulder makes surgical treatment of these injuries challenging. This article reports a single-surgeon experience with a transosseous suture fixation technique for the treatment of unstable lateral clavicle fractures. MATERIALS AND METHODS: A retrospective review of all patients with unstable lateral clavicle fractures treated with a transosseous suture technique from 2015-2018 was performed. The indication for surgery was significant displacement between the main medial and lateral clavicle fragments. The surgical technique used was a modification of the technique as described by Levy. Patients were followed postoperatively with active and passive range of motion (ROM) measurements, strength testing, and American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form score, visual analog scale score, and standard radiographs. Patients were followed to radiographic union. RESULTS: Twelve patients underwent surgical fixation of unstable lateral clavicle fractures from 2015-2018. All patients had excellent function, full ROM, minimal pain, and improved functional scores at final follow-up. Eleven patients achieved complete union of the fracture. One patient healed with a fibrous union; however, the fracture had maintained alignment and the patient was asymptomatic and satisfied with the result. No patient required a second surgery. CONCLUSION: We found that the transosseous suture technique for fixation is an effective treatment for unstable lateral clavicle fracture. This technique is reproducible, cost effective, and limits the need for revision surgery often encountered with other techniques.

Biologic resurfacing arthroplasty with acellular human dermal allograft and platelet-rich plasma (PRP) in young patients with glenohumeral arthritis-average of 60 months of at mid-term follow-up.

BACKGROUND: The treatment of young patients with glenohumeral arthritis has been challenging. Alternative treatment options include activity modification, arthroscopic débridement, and arthroplasty. Addressing the glenoid during arthroplasty in this population of patients continues to be a significant challenge. In this study, we evaluated the midterm outcomes of hemiarthroplasty with biologic resurfacing of the glenoid with human dermal matrix allograft. METHODS: Between 2004 and 2011, 55 patients underwent hemiarthroplasty and biologic resurfacing of the glenoid with human dermal matrix allograft. The average age was 50 ± 9 years. Subjective evaluation was performed with the Western Ontario Osteoarthritis of the Shoulder Index, American Shoulder and Elbow Surgeons score, visual analog scale, and Single Assessment Numeric Evaluation. Patients returned to the clinic for clinical examination and radiographic evaluation. The average follow-up was 60 months. RESULTS: The average postoperative American Shoulder and Elbow Surgeons score was 76 ± 22, and the Western Ontario Osteoarthritis of the Shoulder Index score was 76% ± 22%. The visual analog scale score was 2.4 ± 2.6. The average preoperative Single Assessment Numeric Evaluation score was 33% ± 22%, which significantly improved to 72% ± 22% postoperatively. Eighty-one percent of the patients were satisfied (10/47) or highly satisfied (28/47) with their result. With radiographic evaluation, the average joint space was 1 ± 1 mm preoperatively and 2 ± 1 mm postoperatively. A total of 5 cases (9.1%) were revised to anatomic total shoulder arthroplasty with implantation of a glenoid component. DISCUSSION: Hemiarthroplasty with biologic resurfacing of the glenoid using human dermal matrix allograft can lead to successful midterm outcomes with satisfactory complication and revision rates. Both patient satisfaction and clinical outcome remain high regardless of radiographic outcome.

Complications of shoulder arthroscopy.

Over the past 20 to 30 years, arthroscopic shoulder techniques have become increasingly popular. Although these techniques have several advantages over open surgery, surgical complications are no less prevalent or devastating than those associated with open techniques. Some of the complications associated with arthroscopic shoulder surgery include recurrent instability, soft-tissue injury, and neurapraxia. These complications can be minimized with thoughtful consideration of the surgical indications, careful patient selection and positioning, and a thorough knowledge of the shoulder anatomy. Deep infection following arthroscopic shoulder surgery is rare; however, the shoulder is particularly susceptible to Propionibacterium acnes infection, which is mildly virulent and has a benign presentation. The surgeon must maintain a high index of suspicion for this infection. Thromboemoblic complications associated with arthroscopic shoulder techniques are also rare, and studies have shown that pharmacologic prophylaxis has minimal efficacy in preventing these complications. Because high-quality studies on the subject are lacking, minimal evidence is available to suggest strategies for prevention.

General surgical principles of open rotator cuff repair in the management of failed arthroscopic cuff repairs.

Open management of failed rotator cuff repair is currently rare because of the advancements in arthroscopic techniques in rotator cuff surgery. Minimally invasive arthroscopic treatment of rotator cuff injuries has eclipsed the traditional open approach at most institutions around the world. Many residents complete their training in orthopaedic surgery without exposure to traditional open rotator cuff repair. When open repair is chosen, an understanding of the necessary preoperative evaluation, surgical techniques, and postoperative care regimens will provide patients with the best possible outcomes.

Shoulder arthroplasty for fracture: does a fracture-specific stem make a difference?

BACKGROUND: Arthroplasty for shoulder fractures is a technically challenging and unpredictable procedure and its use is controversial. QUESTIONS/PURPOSES: We therefore asked (1) to what degree function would be restored, (2) whether tuberosity healing would reliably occur, and (3) whether stem design would influence function in patients treated with hemiarthroplasty for proximal humerus fracture. PATIENTS AND METHODS: We retrospectively reviewed all patients treated with a hemiarthroplasty for proximal humeral fracture between September 2001 and May 2006. The first 58 patients (September 2001 to March 2004) were treated with a conventional humeral prosthesis. The next 112 patients (April 2004 to May 2006) were treated with a fracture-specific humeral prosthesis. Clinical measures (American Shoulder and Elbow Surgeons scores, visual analog pain scores, and goniometric measurements of glenohumeral motion) and radiographic evaluation of tuberosity healing were performed at minimum 24-month followup (mean, 32 months; range, 24-96 months). RESULTS: Mean active anterior elevation was 118°, mean active external rotation 37.6°, and mean American Shoulder and Elbow Surgeons score 66. Overall, 127 of 170 (75%) greater tuberosities healed. With respect to stem design, active anterior elevation, active external rotation, and American Shoulder and Elbow Surgeons score were better with fracture-specific stems (129.8°, 39°, and 72, respectively) than with conventional stems (95.4°, 33.0°, and 55, respectively). Fewer tuberosities healed with conventional stems (38 of 58, 66%) than with fracture-specific stems (89 of 112, 79%). CONCLUSIONS: The use of fracture-specific stems during proximal humeral hemiarthroplasty for fracture appears to improve functional use of the injured shoulder and tuberosity healing compared to conventional stems. LEVEL OF EVIDENCE: Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Subscapularis repair after shoulder arthroplasty: biomechanical and clinical validation of a novel technique.

HYPOTHESIS: We hypothesized that releasing the subscapularis with lesser tuberosity bone may improve strength of fixation of the subscapularis during total shoulder atthroplasty (TSA). MATERIALS AND METHODS: In 15 cadaveric humeri, all musculature was removed except the subscapularis. A standard humeral head osteotomy was performed for TSA. The subscapularis was released with a fleck of lesser tuberosity bone in 10 specimens from five matched pairs, and a tenotomy was performed in five. Five osteotomies were repaired with single-row heavy non-absorbable sutures and five with an additional double-row. Repairs were subjected to cyclical loading at 180 newtons for 400 cycles, increasing by 180 newtons to failure. A retrospective review of 100 consecutive patients who underwent dual-row repair of the subscapularis fleck osteotomy following TSA was also performed with minimal follow-up of 24 months (24-48). RESULTS: Both single (430 N) and double-row (466 N) fixation of the fleck osteotomy were significantly stronger than tenotomy suture repair (252 N) (p < .04). There was no significant difference between single and double-row ultimate strengths. Qualitatively, double-row fixation fixed the fleck osteotomy more securely to the donor site with respect to gross rotational motion. At final clinical review, the lift-off test was rated as normal in 79%. The belly press was rated as normal in 86%. Eighty-two percent were able to tuck in their shirts. CONCLUSION: Subscapularis release with fleck osteotomy provides superior biomechanical ultimate strength compared to standard tenotomy. There was no visible motion during biomechanical testing with dual-row osteotomy fixation compared to single-row fixation. Clinical results of this dual-row technique document showed good restoration of subscapularis integrity for activities of daily living. LEVEL OF EVIDENCE: Basic science study and level 4; retrospective review, case series, no control group.

Hemiarthroplasty for proximal humeral fracture: restoration of the Gothic arch.

Proximal humerus fractures are the most common fractures of the shoulder girdle, and initial management of these injuries often determines final outcome. When arthroplasty is used to manage proximal humeral fractures, surgery remains technically demanding, and outcomes have been unpredictable. Recent advances in both technique and prosthetic implants have led to more successful and reproducible results. Key technical points include restoration of the Gothic arch, anatomic tuberosity reconstruction, and minimal soft tissue dissection.

Arthroscopic repair of full-thickness tears of the rotator cuff in patients younger than 40 years.

PURPOSE: Recent reports document excellent outcomes with arthroscopic repair of rotator cuff tears (RCT). However, full-thickness RCT are uncommon in patients younger than 40 years, and few reports document results after repair in this population. The purpose of this study is to retrospectively report results of arthroscopic repair of full-thickness RCT in patients younger than 40 years. METHODS: Twenty-three consecutive patients younger than 40 years with full-thickness RCT underwent arthroscopic repair with suture anchors. Mean age was 37 years (range, 21 to 39). The mean size of RCT was 2.4 cm in the largest dimension (range, 1 to 4 cm). The mean number of anchors used was 2.5 (range, 1 to 4). Concomitant procedures included subacromial decompression (22), distal clavicle resection (13), SLAP repair (2), biceps tenodesis (2), anterior capsulorraphy (1), and capsular releases (1), and were performed at the discretion of the surgeon. Twenty-two patients (95%) recalled a single incipient trauma; two patients sustained a dislocation. Ten patients (43%) claimed Workers' Compensation (WC). Minimum follow-up was 24 months, and mean follow-up was 26 months (range, 24 to 29). RESULTS: Mean preoperative American Shoulder and Elbow Surgeon's (ASES) self-report score was 42 (range, 22 to 60); the mean postoperative score was 92 (range, 65 to 100; P < .01). Twenty-one patients (90%) returned to their previous level of activity and employment, including 9 (90%) with WC claims. All patients (100%) reported diminished pain, and 22 (95%) reported improvement with activities of daily living. Complications included superficial wound infection (1) and axillary nerve palsy after initial dislocation (1). Given the choice, 22 patients (95%) would have same procedure again. CONCLUSIONS: Excellent outcomes were observed following arthroscopic rotator cuff repair both with and without concomitant procedures in patients younger than 40 years. Full-thickness RCT in patients younger than 40 years appeared to be traumatic in etiology. Successful repair returns patients to their pre-injury level of function. These results support arthroscopic rotator cuff repair in young, active patients. LEVEL OF EVIDENCE: Level IV, therapeutic case series.

Humeral hemiarthroplasty with biologic resurfacing of the glenoid for glenohumeral arthritis. Two to fifteen-year outcomes.

BACKGROUND: Biologic glenoid resurfacing was developed in 1988 as an alternative to total shoulder arthroplasty in selected (usually younger) patients with primary, posttraumatic, or postreconstructive glenohumeral arthritis. A variety of biologic surfaces, including anterior capsule, autogenous fascia lata, and Achilles tendon allograft, have been combined with a humeral hemiarthroplasty. METHODS: From November 1988 to November 2003, thirty-four patients (thirty-six shoulders) who were managed with biologic glenoid resurfacing and humeral head replacement either with cement (ten shoulders) or without cement (twenty-six shoulders) were followed prospectively. The study group included thirty men and four women with an average age of fifty-one years. The diagnoses included primary glenohumeral osteoarthritis (eighteen shoulders), postreconstructive arthritis (twelve), posttraumatic arthritis (five), and osteonecrosis (one). Anterior capsule was used for seven shoulders, autogenous fascia lata for eleven, and Achilles tendon allograft for eighteen. All shoulders were assessed clinically and with serial radiographs. RESULTS: The mean American Shoulder and Elbow Surgeons score was 39 points preoperatively and 91 points at the time of the most recent follow-up. According to Neer's criteria, the result was excellent for eighteen shoulders, satisfactory for thirteen, and unsatisfactory for five. Glenoid erosion averaged 7.2 mm and appeared to stabilize at five years. There were no revisions for humeral component loosening. Complications included infection (two patients), instability (three patients), brachial plexitis (one patient), and deep-vein thrombosis (one patient). Factors that appeared to be associated with unsatisfactory results were the use of capsular tissue as the resurfacing material and infection. CONCLUSIONS: Biologic resurfacing of the glenoid can provide pain relief similar to total shoulder arthroplasty. It allows selected younger patients to maintain an active lifestyle, including weight-lifting and manual work, without the risk of polyethylene wear. On the basis of this and previous reviews, we currently recommend Achilles tendon allograft as the preferred resurfacing material when this option is chosen. LEVEL OF EVIDENCE: Therapeutic Level IV. See Instructions to Authors for a complete description of levels of evidence.

Functional outcomes after total claviculectomy as a salvage procedure. A series of six cases.

BACKGROUND: Total claviculectomy has been used for the treatment of tumor, infection, nonunion, and vascular compromise. Given its limited indications, few reports on the outcome after claviculectomy exist. The purpose of the present study was to evaluate the function of the shoulder, with use of a modern scoring system, after total claviculectomy. METHODS: A retrospective review of the records of six patients who had undergone unilateral claviculectomy was performed after an average duration of follow-up of 5.7 years. The indication for surgery had been an infection at the site of a clavicular nonunion for three patients, nonunion with subclavian vein compression for two, and pain after a failed medial clavicular excision for one. The preoperative and postoperative evaluations included testing of the range of motion, strength, and stability as well as determination of the American Shoulder and Elbow Surgeons score on the basis of a functional questionnaire. RESULTS: Range of motion was improved slightly or unchanged following claviculectomy. The mean American Shoulder and Elbow Surgeons score improved from 18 (range, 5 to 35) preoperatively to 88 (range, 75 to 95) postoperatively. The mean pain level (with 0 indicating no pain and 10 indicating the worst pain) decreased from 9.5 preoperatively to 1.5 postoperatively. Postoperatively, strength testing showed improvement from grade 4- (of 5) to 5 in all planes tested except extension (in which it remained at grade 4). Patient satisfaction was high, with a mean of 9.0 on a 10-point scale. There were five complications, including one subclavian vein laceration requiring vascular repair, two deep infections, and two superficial infections. CONCLUSIONS: Despite a high complication rate, the functional outcomes following claviculectomy were good in this group of six patients. Total claviculectomy may be a useful salvage procedure for clinical situations in which the restoration of normal clavicular osseous anatomy is impossible. Patients can expect acceptable pain relief and few or no deficits in activities of daily living. LEVEL OF EVIDENCE: Therapeutic Level IV.

Biologic resurfacing of the arthritic glenohumeral joint: Historical review and current applications.

In recent years there has been a resurgence of interest in the use of biologic resurfacing of the glenoid for the treatment of glenohumeral arthritis in younger patients. We review the history as well as the current applications of this procedure.

Arthroscopic ulnohumeral arthroplasty for degenerative arthritis of the elbow in patients under fifty years of age.

Degenerative arthritis of the elbow in patients aged under 50 years can cause disabling pain, severely restricted range of motion (ROM), and functional limitations. Open ulnohumeral arthroplasty has been demonstrated to produce satisfactory pain relief and ROM gains. We report the results of an all-arthroscopic ulnohumeral arthroplasty for degenerative arthritis of the elbow in younger patients. Eleven consecutive patients aged under 50 years with radiographically documented degenerative elbow arthritis underwent an all-arthroscopic ulnohumeral arthroplasty as described by Savoie et al. Indications for surgery were pain and limited ROM refractory to 12 months of conservative treatment. The mean age at the time of surgery was 36 years (range, 23-47 years). The minimum postoperative follow-up was 24 months, with a mean of 26 months (range, 24-29 months). Preoperatively, mean flexion was 100 degrees (range, 70 degrees-140 degrees) and mean extension (short of neutral) was 40 degrees (range, 10 degrees-60 degrees). Postoperatively, mean flexion was 140 degrees (range, 130 degrees-150 degrees; P < .01) and mean extension was 7 degrees (range, 0 degrees-20 degrees; P < .01). The total arc of motion averaged 60 degrees preoperatively and 133 degrees postoperatively (improvement of 73 degrees, P < .01). The mean subjective pain level improved from 9.2 to 1.7 (where 10 indicates worst pain and 0 indicates no pain). Mean subjective patient satisfaction improved from 1.8 to 9.0 (where 0 indicates unsatisfied and 10 indicates completely satisfied). All-arthroscopic ulnohumeral arthroplasty provides significant short-term pain relief, as well as restoration of elbow ROM and function, in patients aged under 50 years with degenerative arthritis of the elbow. The long-term durability of this procedure with regard to preservation of ROM and radiographic progression of arthritis remains unknown.

Four-part proximal humerus fractures: evaluation and treatment.

Four-part proximal humerus fractures represent a difficult entity in the management of upper extremity trauma. Most of these fractures are not amenable to operative fixation; thus, surgical address is necessarily one of fracture arthroplasty. Timely reestablishment of the Gothic arch using a fracture-specific prosthesis leads reliably to anatomic tuberosity osteosynthesis. Hence, shoulder arthroplasty for fracture should be considered an augmented osteosynthesis, with precise prosthetic implantation supplementing anatomic tuberosity reconstruction. Further investigations are ongoing regarding the use of specific fracture implants and biologic substrates in an attempt to improve further the rate of tuberosity healing in the older patient population after this operation.

Humeral head circle-fit method greatly increases reliability and accuracy when measuring anterior-posterior radiographs of the proximal humerus.

Measurements made on routine A-P radiographs can predict strength/quality of the proximal humerus, as shown in terms of two easy-to-measure parameters: Cortical index (CI) and mean-combined cortical thickness (MCCT). Because of high variability inherent when using established methods to measure these parameters, we describe a new orientation system. Using digitized radiographs of 33 adult proximal humeri, five observers measured anatomical reference locations in accordance with: (i) Tingart et al. (2003) method, (ii) Mather et al. (2013) method, and (iii) our new humeral head Circle-Fit method (CFM). The Tingart and Mather methods measure CI and MCCT with respect to upper and lower edges of 20 mm tall rectangles fit to a proximal diaphyseal location where endosteal (Tingart) or periosteal (Mather) cortical margins become parallel. But high intra- and inter-observer variability occurs when placing the rectangles because of uncertainty in identifying cortical parallelism. With the CFM an adjustable circle is fit to the humeral head articular surface, which reliably and easily establishes a proximal metaphyseal landmark (M1) at the surgical neck. Distal locations are then designated at successive 10 mm increments below M1, including a second metaphyseal landmark (M2) followed by diaphyseal (D) locations (D1, D2 ⋯D6). D1 corresponds most closely to the proximal edges of the rectangles used in the other methods. Results showed minimal inter-observer variations (mean error, 1.5 ± 1.1 mm) when the CFM is used to establish diaphyseal locations for making CI and MCCT measurements when compared to each of the other methods (mean error range, 10.7 ± 5.9 to 13.3 ± 6.7 mm) (p < 0.001). © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:2313-2322, 2017.

Shoulder arthritis in the young adult: arthroscopy to arthroplasty.

Young adult patients with shoulder arthritis present challenging treatment decisions for the orthopaedic surgeon. Patients treated with shoulder arthroplasty have the youngest average age of all patients who undergo joint arthroplasty. However, in the young, active patient or in those without advanced disease, joint arthroplasty may not be appropriate. Arthroscopic treatment or interposition arthroplasty may provide symptomatic relief without radically compromising future procedures.

Radiographic morphometry and densitometry predict strength of cadaveric proximal humeri more reliably than age and DXA scan density.

Methods are needed for identifying poorer quality cadaver proximal humeri to ensure that they are not disproportionately segregated into experimental groups for fracture studies. We hypothesized that measurements made from radiographs of cadaveric proximal humeri are stronger predictors of fracture strength than chronological age or bone density values derived from dual-energy x-ray absorptiometry (DXA) scans. Thirty-three proximal humeri (range: 39-78 years) were analyzed for: (1) bone mineral density (BMD, g/cm(2)) using DXA, (2) bulk density (g/cm(3)) using DXA and volume displacement, (3) regional bone density in millimeters of aluminum (mmAl) using radiographs, and (4) regional mean (medial+lateral) cortical thickness and cortical index (CI) using radiographs. The bones were then fractured simulating a fall. Strongest correlations with ultimate fracture load (UFL) were: mean cortical thickness at two diaphyseal locations (r = 0.71; p < 0.001), and mean mmAl in the humeral head (r = 0.70; p < 0.001). Weaker correlations were found between UFL and DXA-BMD (r = 0.60), bulk density (r = 0.43), CI (r = 0.61), and age (r = -0.65) (p values <0.01). Analyses between UFL and the product of any two characteristics showed six combinations with r-values >0.80, but none included DXA-derived density, CI, or age. Radiographic morphometric and densitometric measurements from radiographs are therefore stronger predictors of UFL than age, CI, or DXA-derived density measurements.

Reusing cadaveric humeri for fracture testing after testing simulated rotator cuff tendon repairs.

The financial cost of using human tissues in biomedical testing and surgical reconstruction is predicted to increase at a rate that is disproportionately greater than other materials used in biomechanical testing. Our first hypothesis is that cadaveric proximal humeri that had undergone monotonic failure testing of simulated rotator cuff repairs would not differ in ultimate fracture loads or in energy absorbed to fracture when compared to controls (i.e., bones without cuff repairs). Our second hypothesis is that there can be substantial cost savings if these cadaveric proximal humeri, with simulated cuff repairs, can be re-used for fracture testing. Results of fracture tests (conducted in a backwards fall configuration) and cost analysis support both hypotheses. Hence, the bones that had undergone monotonic failure tests of various rotator cuff repair techniques can be re-used in fracture tests because their load-carrying capacity is not significantly reduced.