RESUMO
Progress in sorting, separating, and characterizing ever smaller amounts of chemical and biological material depends on the availability of methods for the controlled interaction with nanoscale and molecular-size objects. Here, we report on the reversible, tunable trapping of single DNA molecules and other charged micro- and nanoparticles in aqueous solution using a direct-current (DC) corral trap setup. The trap consists of a circular, non-conductive void in a metal-coated surface that, when charged, generates an electrostatic potential well in the proximate solution. Our results demonstrate that stable, nanoscale confinement of charged objects is achievable over extended periods of time, that trap stiffness is controlled by the applied voltage, and that simultaneous trapping of multiple objects is feasible. The approach shows great promise for lab-on-a-chip systems and biomedical applications due to its simplicity, scalability, selectivity, and the capability to manipulate single DNA molecules in standard buffer solutions.
Assuntos
Nanopartículas , DNA/química , Substâncias Macromoleculares , Nanopartículas/química , Eletricidade Estática , ÁguaRESUMO
Dielectrophoresis is a robust approach for the manipulation and separation of (bio)particles using microfluidic platforms. We developed a dielectrophoretic corral trap in a microfluidic device that utilizes negative dielectrophoresis to capture single spherical polystyrene particles. Circular-shaped micron-size traps were employed inside the device and the three-dimensional trap stiffness (restoring trapping force from equilibrium trapping location) was analyzed using 4.42 µm particles and 1 MHz of an alternating electric field from 6 VP-P to 10 VP-P . The trap stiffness increased exponentially in the x- and y-direction, and linearly in the z-direction. Image analysis of the trapped particle movements revealed that the trap stiffness is increased 608.4, 539.3, and 79.7% by increasing the voltage from 6 VP-P to 10 VP-P in the x-, y-, and z-direction, respectively. The trap stiffness calculated from a finite element simulation of the device confirmed the experimental results. This analysis provides important insights to predict the trapping location, strength of the trapping, and optimum geometry for single particle trapping and its applications such as single-molecule analysis and drug discovery.
Assuntos
Eletroforese/instrumentação , Eletroforese/métodos , Simulação por Computador , Desenho de Equipamento , Análise de Elementos Finitos , Técnicas Analíticas Microfluídicas/instrumentação , Microesferas , Nanopartículas/químicaRESUMO
Dielectrophoresis, an electrokinetic technique, can be used for contactless manipulation of micro- and nano-size particles suspended in a fluid. We present a 3-D microfluidic DEP device with an orthogonal electrode configuration that uses negative dielectrophoresis to trap spherical polystyrene micro-particles. Traps with three different basic geometric shapes, i.e. triangular, square, and circular, and a fixed trap area of around 900 µm2 were investigated to determine the effect of trap shape on dynamics and strength of particle trapping. Effects of trap geometry were quantitatively investigated by means of trap stiffness, with applied electric potentials from 6 VP-P to 10 VP-P at 1 MHz. Analyzing the trap stiffness with a trapped 4.42 µm spherical particle showed that the triangular trap is the strongest, while the square shape trap is the weakest. The trap stiffness grew more than eight times in triangular traps and six times in both square and circular traps when the potential of the applied electric field was increased from 6 VP-P to 10 VP-P at 1 MHz. With the maximum applied potential, i.e. 10 VP-P at 1 MHz, the stiffness of the triangular trap was 60% and 26% stronger than the square and circular trap, respectively. A finite element model of the microfluidic DEP device was developed to numerically compute the DEP force for these trap shapes. The findings from the numerical computation demonstrate good agreement with the experimental analysis. The analysis of three different trap shapes provides important insights to predict trapping location, strength of the trapping zone, and optimized geometry for high throughput particle trapping.
Assuntos
Técnicas Analíticas Microfluídicas , Eletricidade , Eletroforese , Dispositivos Lab-On-A-Chip , PoliestirenosRESUMO
The detection of body fluids has been used to identify a suspect and build a criminal case. As the amount of evidence collected at a crime site is limited, a multiplex identification system for body fluids using a small amount of sample is required. In this study, we proposed a multiplex detection platform using an Ag vertical nanorod metal enhanced fluorescence (MEF) substrate for semen and vaginal fluid (VF), which are important evidence in cases of sexual crime. The Ag nanorod MEF substrate with a length of 500 nm was fabricated by glancing angle deposition, and amino functionalization was conducted to improve binding ability. The effect of incubation time was analyzed, and an incubation time of 60 min was selected, at which the fluorescence signal was saturated. To assess the performance of the developed identification chip, the identification of semen and VF was carried out. The developed sensor could selectively identify semen and VF without any cross-reactivity. The limit of detection of the fabricated microarray chip was 10 times better than the commercially available rapid stain identification (RSID) Semen kit.
Assuntos
Análise Serial de Proteínas/instrumentação , Análise do Sêmen/métodos , Sêmen/química , Vagina/química , Líquidos Corporais/química , Feminino , Fluorescência , Humanos , Masculino , Nanotubos/química , Análise de Sequência com Séries de OligonucleotídeosRESUMO
We reported an automated dielectrophoretic (DEP) tweezers-based force spectroscopy system to examine intermolecular weak binding interactions, which consists of three components: (1) interdigitated electrodes and micro-sized polystyrene particles used as DEP tweezers and probes inside a microfluidic device, along with an arbitrary function generator connected to a high voltage amplifier; (2) microscopy hooked up to a high-speed charge coupled device (CCD) camera with an image acquisition device; and (3) a computer aid control system based on the LabVIEW program. Using this automated system, we verified the measurement reliability by measuring intermolecular weak binding interactions, such as hydrogen bonds and Van der Waals interactions. In addition, we also observed the linearity of the force loading rates, which is applied to the probes by the DEP tweezers, by varying the number of voltage increment steps and thus affecting the linearity of the force loading rates. This system provides a simple and low-cost platform to investigate intermolecular weak binding interactions.
RESUMO
Quantitative detection of the biological properties of living cells is essential for a wide range of purposes, from the understanding of cellular characteristics to the development of novel drugs in nanomedicine. Here, we demonstrate that analysis of cell biological properties within a microfluidic dielectrophoresis device enables quantitative detection of cellular biological properties and simultaneously allows large-scale measurement in a noise-robust and probeless manner. Applying this technique, the static and dynamic biological responses of live B16F10 melanoma cells to the small-molecule drugs such as N-ethylmaleimide (NEM) and [(dihydronindenyl)oxy]alkanoic acid (DIOA) were quantitatively and statistically examined by investigating changes in movement of the cells. Measurement was achieved using subtle variations in dielectrophoresis (DEP) properties of the cells, which were attributed to activation or deactivation of K(+)/Cl(-) cotransporter channels on the cell membrane by the small-molecule drugs, in a microfluidic device. On the basis of quantitative analysis data, we also provide the first report of the shift of the complex permittivity of a cell induced by the small-molecule drugs. In addition, we demonstrate interesting quantifiable parameters including the drug effectiveness coefficient, antagonistic interaction coefficient, kinetic rate, and full width at half-maximum, which corresponded to changes in biological properties of B16F10 cells over time when NEM and DIOA were introduced alone or in combination. Those demonstrated parameters represent very useful tools for evaluating the effect of small-molecule drugs on the biological properties of cells.
Assuntos
Ácidos Carboxílicos/análise , Etilmaleimida/análise , Indenos/análise , Dispositivos Lab-On-A-Chip , Técnicas Analíticas Microfluídicas/instrumentação , Animais , Ácidos Carboxílicos/farmacologia , Membrana Celular/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Relação Dose-Resposta a Droga , Eletroforese , Etilmaleimida/farmacologia , Indenos/farmacologia , Camundongos , Relação Estrutura-Atividade , Simportadores/antagonistas & inibidores , Simportadores/metabolismo , Fatores de Tempo , Células Tumorais Cultivadas , Cotransportadores de K e Cl-RESUMO
While the average value measurement approach can successfully analyze and predict the general behavior and biophysical properties of an isogenic cell population, it fails when significant differences among individual cells are generated in the population by intracellular changes such as the cell cycle, or different cellular responses to certain stimuli. Detecting such single-cell differences in a cell population has remained elusive. Here, we describe an easy-to-implement and generalizable platform that measures the dielectrophoretic cross-over frequency of individual cells by decreasing measurement noise with a stochastic method and computing ensemble average statistics. This platform enables multiple, real-time, label-free detection of individual cells with significant dielectric variations over time within an isogenic cell population. Using a stochastic method in combination with the platform, we distinguished cell subpopulations from a mixture of drug-untreated and -treated isogenic cells. Furthermore, we demonstrate that our platform can identify drug-treated isogenic cells with different recovery rates.
RESUMO
The concentration of C-reactive protein (CRP), a classic acute phase plasma protein, increases rapidly in response to tissue infection or inflammation, especially in cases of cardiovascular disease and stroke. Thus, highly sensitive monitoring of the CRP concentration plays a pivotal role in detecting these diseases. Many researchers have studied methods for the detection of CRP concentrations such as optical, mechanical, and electrochemical techniques inside microfluidic devices. While significant progress has been made towards improving the resolution and sensitivity of detection, only a few studies have systematically analyzed the CRP concentration using both numerical and experimental approaches. Specifically, systematic analyses of the electrochemical detection of high-sensitivity CRP (hsCRP) using an enzyme-linked immunosorbant assay (ELISA) inside a microfluidic device have never been conducted. In this paper, we systematically analyzed the electrochemical detection of CRP modified through the attachment of an alkaline phosphatase (ALP-labeled CRP) using ELISA inside a chip. For this analysis, we developed a model based on antigen-antibody binding kinetics theory for the numerical quantification of the CRP concentration. We also experimentally measured the current value corresponding to the ALP-labeled CRP concentration inside the microfluidic chip. The measured value closely matched the calculated value obtained by numerical simulation using the developed model. Through this comparison, we validated the numerical simulation methods, and the calculated and measured values. Lastly, we examined the effects of various microfluidic parameters on electrochemical detection of the ALP-labeled CRP concentration using numerical simulations. The results of these simulations provide insight into the microfluidic electrochemical reactions used for protein detection. Furthermore, the results described in this study should be useful for the design and optimization of electrochemical immunoassay chips for the detection of target proteins.
Assuntos
Proteína C-Reativa/análise , Técnicas Eletroquímicas/métodos , Técnicas Analíticas Microfluídicas/instrumentação , Técnicas Analíticas Microfluídicas/métodos , Fosfatase Alcalina/metabolismo , Aminofenóis/metabolismo , Compostos de Anilina/metabolismo , Ensaio de Imunoadsorção Enzimática/métodos , Desenho de Equipamento , Imunoensaio/instrumentação , Imunoensaio/métodos , Limite de Detecção , Modelos Teóricos , Compostos Organofosforados/metabolismoRESUMO
Label-free dielectrophoretic force-based surface charge detection has shown great potential for highly sensitive and selective sensing of metal ions and small biomolecules. However, this method suffers from a complex calibration process and measurement signal interference in simultaneous multi-analyte detection, thus creating difficulties in multiplex detection. We have developed a method to overcome these issues based on the optical discrimination of the dielectrophoretic behaviors of multiple microparticle probes considering the surface charge difference before and after self-assembling conjugation. In this report, we demonstrate and characterize this dielectrophoretic force-based surface charge detection method with particle probes functionalized by various biomolecules. This technique achieved an attomolar limit of detection (LOD) for Hg2+ in distilled water and a femtomolar LOD in drinking water using DNA aptamer-functionalized particle probes. More importantly, using two different DNA aptamer-functionalized particle probes for Hg2+ and Ag+, label-free dielectrophoretic multiplex detection of these species in drinking water with a femtomolar and a nanomolar LOD was achieved for the first time.
Assuntos
Aptâmeros de Nucleotídeos , Técnicas Biossensoriais , Água Potável , Mercúrio , Técnicas Biossensoriais/métodos , Limite de DetecçãoRESUMO
We report the electric field and pH sensitivity of fluid gated metal-semiconductor hybrid (MSH) Schottky structures consisting of a Titanium layer on n-type GaAs. Compared to standard field-effect sensors, the MSH Schottky structures are 21 times more sensitive to electric field of -46.6 V/cm and show about six times larger resistance change as pH of the solution is decreased from 8.17 to 5.54. The potential change at the fluidic gate and passivation layer interface by bias voltages and pH are mirrored by the metal shunt, resulting in larger depletion widths under the Schottky junction and resistance change as compared to sensors with no Schottky junction. 2D numerical simulation results are in good agreement with the measured data and suggest thinner mesa with lower doping density can further increase device sensitivity.
Assuntos
Arsenicais/química , Técnicas Biossensoriais/métodos , Eletricidade , Gálio/química , Titânio/química , Transistores Eletrônicos , Concentração de Íons de Hidrogênio , Modelos TeóricosRESUMO
Investigation of the dielectric properties of cell membranes plays an important role in understanding the biological activities that sustain cellular life and realize cellular functionalities. Herein, the variable dielectric polarization characteristics of cell membranes are reported. In controlling the dielectric polarization of a cell using dielectrophoresis force spectroscopy, different cellular crossover frequencies were observed by modulating both the direction and sweep rate of the frequency. The crossover frequencies were used for the extraction of the variable capacitance, which is involved in the dielectric polarization across the cell membranes. In addition, this variable phenomenon was investigated by examining cells whose membranes were cholesterol-depleted with methyl-ß-cyclodextrin, which verified a strong correlation between the variable dielectric polarization characteristics and membrane composition changes. This study presented the dielectric polarization properties in live cells' membranes that can be modified by the regulation of external stimuli and provided a powerful platform to explore cellular membrane dielectric polarization.
Assuntos
Membrana Celular/metabolismo , Membrana Celular/efeitos dos fármacos , Sobrevivência Celular , Impedância Elétrica , Humanos , Células MCF-7 , beta-Ciclodextrinas/farmacologiaRESUMO
We present a novel dielectrophoretic technique that can be used to characterize molecular interactions inside a microfluidic device. Our approach allows functionalized beads which are initially at rest on a functionalized surface to be pulled away from the surface by the dielectrophoretic force acting on the beads. As a result, the interaction between the molecules on the surface and the beads can be quantitatively examined. We report detailed experimental results and validate the results with a model to show that the technique can be used to measure forces of interaction between molecules under various experimental conditions.
Assuntos
Eletroquímica/métodos , Eletroforese em Microchip/instrumentação , Eletroforese/métodos , Eletroforese em Microchip/métodos , Lisina/química , Dióxido de Silício/química , Anidridos Succínicos/química , Propriedades de SuperfícieRESUMO
Temperature increases during dielectrophoresis (DEP) can affect the response of biological entities, and ignoring the effect can result in misleading analysis. The heating mechanism of a DEP device is typically considered to be the result of Joule heating and is overlooked without an appropriate analysis. Our experiment and analysis indicate that the heating mechanism is due to the dielectric loss (Debye relaxation). A temperature increase between interdigitated electrodes (IDEs) has been measured with an integrated micro temperature sensor between IDEs to be as high as 70 °C at 1.5 MHz with a 30 Vpp applied voltage to our ultra-low thermal mass DEP device. Analytical and numerical analysis of the power dissipation due to the dielectric loss are in good agreement with the experiment data.
RESUMO
Intracellular delivery of functional molecules such as proteins, transcription factors and DNA is effective and promising in cell biology. However, existing transfection methods are often unsuitable to deliver big molecules into cells or require carriers such as viruses and peptides specific to the target molecules. In addition, the nature of bulk processing does not generally provide accurate dose control of individual cells. The concept of single-cell-based material injection based on electrokinetic pumping through nanocapillaries could overcome these problems, yet the fabrication and operation of nanoscale 3-dimensional structures have remained unsolved. In this research, a hybrid (PDMS/glass) microfluidic chip with a true 3-dimensional nanoinjection structure (called "nanoinjection system") is presented. The nanoinjection structure was fabricated by femtosecond-laser (fs-laser) ablation in a single solid glass, which showed very successful delivery of red fluorescent protein (RFP) and expression of plasmid DNA in several different types of cells. This system is promising in that the amount of molecules to be delivered is controllable and the processed cells are systematically separated into a harvesting chamber, which can radically improve the purity of the processed cells. In addition, it was confirmed that the cells were healthy even after the molecule injection for a few seconds, indicating that the injection time can be significantly elongated, further improving the delivery efficiency of biomolecules without affecting the cell viability. We envision that the nanoinjection system having the major features of being carrier-free and dose-controllable, having an unlimited injection period, and ease of harvesting will greatly contribute to the next-generation research studies in the fields of cell biology and cell therapeutics.
Assuntos
DNA/metabolismo , Proteínas de Fluorescência Verde/metabolismo , Proteínas Luminescentes/metabolismo , Células-Tronco Mesenquimais/química , Células-Tronco Mesenquimais/metabolismo , Nanotecnologia , Células Cultivadas , DNA/administração & dosagem , Proteínas de Fluorescência Verde/administração & dosagem , Humanos , Proteínas Luminescentes/administração & dosagem , Células-Tronco Mesenquimais/citologia , Nanotecnologia/instrumentação , Plasmídeos/administração & dosagem , Plasmídeos/metabolismo , Proteína Vermelha FluorescenteRESUMO
The low solubility of sugars has hampered the lipase-catalyzed synthesis of fatty acid sugar esters in organic solvents and ionic liquids (ILs), because several solvents that are able to effectively dissolve sugars are detrimental to enzymes. In this work, in order to prepare a high concentration of sugars in ILs, we have developed a new procedure that entails mixing an aqueous sugar solution into ILs followed by removal of the water from the solution. The glucose concentrations in the supersaturated [Emim][TfO] and [Bmim][TfO] were 19 and 10 times higher, respectively, than the solubilities (6.1 and 4.8 g/L) of glucose in the ILs at 25 degrees C. Furthermore, the supersaturated glucose solutions in ILs were maintained over a long period of time without any significant loss of glucose. In ILs that were extremely supersaturated with glucose, lipase-catalyzed esterifications of glucose with vinyl laurate, and lauric acid were successfully carried out. The conversion increased from 8% to 96% at 1 day of reaction by using supersaturated solution in [Bmim][TfO] which had dissolved glucose concentration of 400% higher than its solubility, compared with the reaction using saturated glucose solution. By making the glucose concentration in ILs much higher than the solubility through our novel and simple method, the initial rate and conversion of the lipase-catalyzed reaction were significantly improved.
Assuntos
Ácidos Graxos/síntese química , Glucose/química , Líquidos Iônicos/química , Lipase/química , Catálise , Ativação Enzimática , Enzimas Imobilizadas , Esterificação , Ésteres/síntese química , Proteínas Fúngicas , SolubilidadeRESUMO
Novozym 435-catalyzed synthesis of 6-O-lauroyl-d-glucose in ionic liquids (ILs) was investigated. The highest lipase activity was obtained in water-miscible [Bmim][TfO] which can dissolve high concentration of glucose, while the highest stability of lipase was shown in hydrophobic [Bmim][Tf(2)N]. The optimal activity and stability of lipase could be obtained in [Bmim][TfO] and [Bmim][Tf(2)N] mixture (1:1, v/v). Specifically, the activity of lipase was increased from 1.1 to 2.9 micromolmin(-1)g(-1) by using supersaturated glucose solution in this mixture, compared with reaction using saturated solution. After 5 times reuse of lipase, 86% of initial activity was remained in this mixture, while the residual activity in pure [Bmim][TfO] was 36%. Therefore, the productivity obtained by using ILs mixtures was higher than those in pure ILs.
Assuntos
Ácidos Graxos/química , Glucose/química , Líquidos Iônicos/química , Lipase/metabolismo , Catálise , Enzimas Imobilizadas , Ésteres , Ácidos Graxos/síntese química , Proteínas Fúngicas , Glucose/síntese química , Lauratos/químicaRESUMO
In this paper, we present a new impedance-based method to detect viable spores by electrically detecting their germination in real time within microfluidic biochips. We used Bacillus anthracis Sterne spores as the model organism. During germination, the spores release polar and ionic chemicals, such as dipicolinic acid (DPA), calcium ions, phosphate ions, and amino acids, which correspondingly increase the electrical conductivity of the medium in which the spores are suspended. We first present macro-scale measurements demonstrating that the germination of spores can be electrically detected at a concentration of 10(9) spores ml(-1) in sample volumes of 5 ml, by monitoring changes in the solution conductivity. Germination was induced by introducing an optimized germinant solution consisting of 10 mM L-alanine and 2 mM inosine. We then translated these results to a micro-fluidic biochip, which was a three-layer device: one layer of polydimethylsiloxane (PDMS) with valves, a second layer of PDMS with micro-fluidic channels and chambers, and the third layer with metal electrodes deposited on a pyrex substrate. Dielectrophoresis (DEP) was used to trap and concentrate the spores at the electrodes with greater than 90% efficiency, at a solution flow rate of 0.2 microl min(-1) with concentration factors between 107-109 spores ml(-1), from sample volumes of 1-5 microl. The spores were captured by DEP in deionized water within 1 min (total volume used ranged from 0.02 microl to 0.2 microl), and then germinant solution was introduced to the flow stream. The detection sensitivity was demonstrated to be as low as about a hundred spores in 0.1 nl, which is equivalent to a macroscale detection limit of approximately 10(9) spores ml(-1). We believe that this is the first demonstration of this application in microfluidic and BioMEMS devices.
Assuntos
Bacillus anthracis/fisiologia , Técnicas Biossensoriais/instrumentação , Técnicas Biossensoriais/métodos , Técnicas Analíticas Microfluídicas/instrumentação , Técnicas Analíticas Microfluídicas/métodos , Eletroquímica , Eletrodos , Esporos BacterianosRESUMO
A novel affinity separation method in an aqueous two-phase system (ATPS) is suggested, using protein conjugated IgG as a ligand. For verification of the proposed approach, horseradish peroxidase (HRP) and human IgG was used as a ligand carrier and affinity ligand, respectively. The partition of the affinity ligand, human IgG, was controlled by the conjugation of HRP. Two ATPSs, one consisting of potassium phosphate (15%, w/w) and polyethylene glycol (PEG, M.W. 1450, 10%, w/w) and the other of dextran T500 (5%, w/w) and PEG (M.W. 8000, 5%, w/w), were used. The conjugated human IgG-HRP favored a PEG-rich top phase, whereas human IgG, rabbit anti-human IgG and goat anti-mouse IgG preferred a salt or dextran-rich bottom phase. Using the conjugated human IgG-HRP, rabbit anti-human IgG was successfully separated into a PEG-rich top phase from the mixture with goat anti-mouse IgG. The appropriate molar ratio between human IgG-HRP and rabbit anti-human IgG was around 3:1 and 1:1 for the salt and dextran-based ATPS, respectively. The dextran-based ATPS showed a better recovery yield and purity than the salt-based ATPS for the range of test conditions employed in this experiment. The yield and purity of the recovered rabbit anti-human IgG were 90.8 and 87.7%, respectively, in the dextran-based ATPS, while those in the salt-based ATPS were 78.2 and 73.2%.
Assuntos
Cromatografia de Afinidade/métodos , Peroxidase do Rábano Silvestre/química , Imunoglobulina G/química , Animais , HumanosRESUMO
Elastin-like polypeptides (ELPs) undergo a reversible inverse phase transition upon a change in temperature. This thermally triggered phase transition allows for a simple and rapid means of purifying a fusion protein. Recovery of ELPs-tagged fusion protein was easily achieved by aggregation, triggered either by raising temperature or by adding salt. In this study, levansucrase has been used as a model enzyme in the development of a simple one-step purification method using ELPs. The levansucrase gene cloned from Pseudomonas aurantiaca S-4380 was tagged with various sizes of ELPs to functionally express and optimize the purification of levansucrase. One of two ELPs, ELP[V-20] or ELP[V-40], was fused at the C-terminus of the levansucrase gene. A levansucrase-ELP fusion protein was expressed in Escherichia coli DH5alpha at 37 degrees C for 18 h. The molecular masses of levansucrase-ELP[V-20] and levansucrase-ELP[V-40] were determined as 56 kDa and 65 kDa, respectively. The phase transition of levansucrase-ELP[V-20] occurred at 20 degrees C in 50 mM Tris-Cl (pH 8) buffer with 3 M NaCl added, whereas the phase transition temperature (Tt) of levansucrase-ELP[V-40] was 17 degrees C with 2 M NaCl. Levansucrase was successfully purified using the phase transition characteristics of ELPs, with a recovery yield of higher than 80%, as verified by SDS-PAGE. The specific activity was measured spectrophotometrically to be 173 U/mg and 171 U/mg for levansucrase-ELP[V-20] and levansucrase-ELP[V-40], respectively, implying that the ELP-tagging system provides an efficient one-step separation method for protein purification.