Detection of diluted contaminants on chicken carcasses using a two-dimensional scatter plot based on a two-dimensional hyperspectral correlation spectrum.

A two-dimensional (2D) scatter plot method based on the 2D hyperspectral correlation spectrum is proposed to detect diluted blood, bile, and feces from the cecum and duodenum on chicken carcasses. First, from the collected hyperspectral data, a set of uncontaminated regions of interest (ROIs) and four sets of contaminated ROIs were selected, whose average spectra were treated as the original spectrum and influenced spectra, respectively. Then, the difference spectra were obtained and used to conduct correlation analysis, from which the 2D hyperspectral correlation spectrum was constructed using the analogy method of 2D IR correlation spectroscopy. Two maximum auto-peaks and a pair of cross peaks appeared at 656 and 474 nm. Therefore, 656 and 474 nm were selected as the characteristic bands because they were most sensitive to the spectral change induced by the contaminants. The 2D scatter plots of the contaminants, clean skin, and background in the 474- and 656-nm space were used to distinguish the contaminants from the clean skin and background. The threshold values of the 474- and 656-nm bands were determined by receiver operating characteristic (ROC) analysis. According to the ROC results, a pixel whose relative reflectance at 656 nm was greater than 0.5 and relative reflectance at 474 nm was lower than 0.3 was judged as a contaminated pixel. A region with more than 50 pixels identified was marked in the detection graph. This detection method achieved a recognition rate of up to 95.03% at the region level and 31.84% at the pixel level. The false-positive rate was only 0.82% at the pixel level. The results of this study confirm that the 2D scatter plot method based on the 2D hyperspectral correlation spectrum is an effective method for detecting diluted contaminants on chicken carcasses.

[A dual-band algorithm to detect contaminants with low visibility on chicken carcass surface].

A novel dual-band algorithm for detecting contaminants with low visibility on chicken carcass surface based on hyperspectral image was proposed. Firstly, The 675 nm band image, in which the identity of the intensity within ROI (Region of Interest) is the best and the spectrum difference between ROI and the edge of the ROI is the biggest, was chosen from the hyperspectral data for binarization and the mask was extracted by using region growing on the biggest connected area. Then the "and" operation between the mask and the 400 nm band image with the largest discriminability of contaminants was carried out. The max ROI which can self adapt according to the position and shape of the chicken carcass was obtained. Finally, the labeling method was used to recognize if there are contaminations within the segmented ROI. The results showed that through the proposed method, the max ROIs which could self adapt to the position and shape of the chicken carcass were extracted and the average size of the ROI was bigger than 176% compared to that by existing methods. The average correct identification rate of contaminations such as blood, bile and feces was 81.6%.

[Research on identification of cucumber, stem and leaf based on spectrum analysis technology].

To be able to quickly identify the cucumber real time, the present paper studied the near infrared reflectance characteristics of cucumber, stem and leaf. Spectral reflectance of 138 samples (46 cucumbers, 46 stems and 46 leaves) was collected using near infrared spectroscopy in the band range of 600-1 099 nm indoor. After Savitzky-Golay smoothing preprocessing, random 108 spectral samples were put forward as calibration set. The weighted deviation method was used for choosing the spectral bands 690-950 nm that include much more information. The samples were analyzed by PCA method to extract the principal component scores, combining the Mahalanobis distance method the recognition model was established, and seven abnormal samples were excluded. The partial least squares (PLS) model was established by remaining 101 samples spectra of calibration set, which was used for predicting the validation set (30 samples except of the calibration set). The result shows that the correlation of the predicted value and the actual value reaches up to 0.994 1, and the correct recognition rate is 100%. This significantly illustrates that the near infrared spectral reflectance characteristics are different among the cucumbers, stems and leaves, which can be successfully applied to recognition of cucumber by the method. The developed technique can provide a new method for cucumber identification.

Broiler stunned state detection based on an improved fast region-based convolutional neural network algorithm.

An improved fast region-based convolutional neural network (RCNN) algorithm is proposed to improve the accuracy and efficiency of recognizing broilers in a stunned state. The algorithm recognizes 3 stunned state conditions: insufficiently stunned, moderately stunned, and excessively stunned. Image samples of stunned broilers were collected from a slaughter line using an image acquisition platform. According to the format of PASCAL VOC (pattern analysis, statistical modeling, and computational learning visual object classes) dataset, a dataset for each broiler stunned state condition was obtained using an annotation tool to mark the chicken head and wing area in the original image. A rotation and flip data augmentation method was used to enhance the effectiveness of the datasets. Based on the principle of a residual network, a multi-layer residual module (MRM) was constructed to facilitate more detailed feature extraction. A model was then developed (entitled here Faster-RCNN+MRMnet) and used to detect broiler stunned state conditions. When applied to a reinforcing dataset containing 27,828 images of chickens in a stunned state, the identification accuracy of the model was 98.06%. This was significantly higher than both the established back propagation neural network model (90.11%) and another Faster-RCNN model (96.86%). The proposed algorithm can complete the inspection of the stunned state of more than 40,000 broilers per hour. The approach can be used for online inspection applications to increase efficiency, reduce labor and cost, and yield significant benefits for poultry processing plants.

Prediction of pork color attributes using computer vision system.

Color image processing and regression methods were utilized to evaluate color score of pork center cut loin samples. One hundred loin samples of subjective color scores 1 to 5 (NPB, 2011; n=20 for each color score) were selected to determine correlation values between Minolta colorimeter measurements and image processing features. Eighteen image color features were extracted from three different RGB (red, green, blue) model, HSI (hue, saturation, intensity) and L*a*b* color spaces. When comparing Minolta colorimeter values with those obtained from image processing, correlations were significant (P<0.0001) for L* (0.91), a* (0.80), and b* (0.66). Two comparable regression models (linear and stepwise) were used to evaluate prediction results of pork color attributes. The proposed linear regression model had a coefficient of determination (R(2)) of 0.83 compared to the stepwise regression results (R(2)=0.70). These results indicate that computer vision methods have potential to be used as a tool in predicting pork color attributes.