RESUMO
Surfaces with strong anti-reflection properties have attracted the wide attention of scientists and engineers due to their great application potential in many fields. Traditional laser blackening techniques are limited by the material and surface profile, which are not able to be applied to film and large-scale surfaces. Inspired by the rainforest, a new design for anti-reflection surface structures was proposed by constructing micro-forests. To evaluate this design, we fabricated micro-forests on an Al alloy slab by laser induced competitive vapor deposition. By controlling the deposition of the laser energy, the surface can be fully covered by forest-like micro-nano structures. The porous and hierarchical micro-forests performed a minimum and average reflectance of 1.47% and 2.41%, respectively, in the range of 400-1200â nm. Different from the traditional laser blackening technique, the micro-scaled structures were formed due to the aggregation of the deposited nanoparticles instead of the laser ablation groove. Therefore, this method would lead to little surface damage and can also be applied to the aluminum film with a thickness of 50â µm. The black aluminum film can be used to produce the large-scale anti-reflection shell. Predictably, this design and the LICVD method are simple and efficient, which can broaden the application of the anti-reflection surface in many fields such as visible-light stealth, precision optical sensors, optoelectronic devices, and aerospace radiation heat transfer device.
RESUMO
Laser-materials interaction is the fascinating nexus where laser optics, physical/ chemistry, and materials science intersect. Exploring the dynamic interaction process and mechanism of laser pulses with materials is of great significance for analyzing laser processing. Laser micro/nano processing of multilayer materials is not an invariable state, but rather a dynamic reaction with unbalanced and multi-scale, which involves multiple physical states including laser ablation, heat accumulation and conduction, plasma excitation and shielding evolution. Among them, several physical characteristics interact and couple with each other, including the surface micromorphology of the ablated material, laser absorption characteristics, substrate temperature, and plasma shielding effects. In this paper, we propose an in-situ monitoring system for laser scanning processing with coaxial spectral detection, online monitoring and identification of the characteristic spectral signals of multilayer heterogeneous materials during repeated scanning removal by laser-induced breakdown spectroscopy. Additionally, we have developed an equivalent roughness model to quantitatively analyze the influence of surface morphology changes on laser absorptivity. The influence of substrate temperature on material electrical conductivity and laser absorptivity was calculated theoretically. This reveals the physical mechanism of dynamic variations in laser absorptivity caused by changes in plasma characteristics, surface roughness, and substrate temperature, and it provides valuable guidance for understanding the dynamic process and interaction mechanism of laser with multilayer materials.
RESUMO
Large-area copper layer removal is one of the essential processes in manufacturing printed circuit boards (PCB) and frequency selective surfaces (FSS). However, laser direct ablation (LDA) with one-step scanning is challenging in resolving excessive substrate damage and material residue. Here, this study proposes a laser scanning strategy based on the laser-induced active mechanical peeling (LIAMP) effect generated by resin decomposition. This scanning strategy allows the removal of large-area copper layers from FR-4 copper-clad laminates (FR-4 CCL) in one-step scanning without additional manual intervention. During the removal process, the resin decomposition in the laser-irradiated area provides the mechanical tearing force, while the resin decomposition in the laser-unirradiated area reduces the interfacial adhesion force and provides recoil pressure. By optimizing scanning parameters to control the laser energy deposition, the substrate damage and copper residue can be effectively avoided. In our work, the maximum removal efficiency with different energy densities, pulse duration, and repetition frequency are 31.8 mm2/ms, 30.25 mm2/ms, and 82.8 mm2/ms, respectively. Compared with the reported copper removal using laser direct write lithography technology combined with wet chemical etching (LDWL+WCE) and LDA, the efficiency improved by 8.3 times and 66 times. Predictably, the laser scanning strategy and the peeling mechanism are simple and controllable, which have potential in electronics, communications, and aerospace.
RESUMO
Piglet diarrhea caused by the porcine epidemic diarrhea virus (PEDV) is a common problem on pig farms in China associated with high morbidity and mortality rates. In this study, three PEDV isolates were successfully detected after the fourth blind passage in Vero cells. The samples were obtained from infected piglet farms in Jilin (Changchun), and Shandong (Qingdao) Provinces of China and were designated as CH/CC-1/2018, CH/CC-2/2018, and CH/QD/2018. According to the analysis of the complete S protein gene sequence, the CH/CC-1/2018 and CH/CC-2/2018 were allocated to the G2b branch, while CH/QD/2018 was located in the G1a interval and was closer to the vaccine strain CV777. Successful detection and identification of the isolated strains were carried out using electron microscopy and indirect immunofluorescence. Meanwhile, animal challenge experiments and viral RNA copies determination were used to compare the pathogenicity. The results showed that CH/CC-1/2018 in Changchun was more pathogenic than CH/QD/2018 in Qingdao. In conclusion, the discovery of these new strains is conducive to the development of vaccines to prevent the pandemic of PEDV, especially that the CH/CC-1/2018, and CH/CC-2/2018 were not related to the classical vaccine strain CV777.
Assuntos
Infecções por Coronavirus , Vírus da Diarreia Epidêmica Suína , Doenças dos Suínos , Chlorocebus aethiops , Animais , Suínos , Células Vero , Infecções por Coronavirus/epidemiologia , Infecções por Coronavirus/veterinária , Infecções por Coronavirus/prevenção & controle , Virulência , Filogenia , Diarreia/veterinária , China/epidemiologiaRESUMO
We report a laser adaptive processing technology (LAPT) for the selective removal of Cu/Al multilayer dissimilar materials. Using the wavelength range and intensity distribution of the characteristic spectrum, the properties and content of multilayer dissimilar materials can be analyzed online based on laser-induced breakdown spectroscopy. The traditional low-speed spectral detection mode was transformed into a high-speed photoelectric detection method by using a scheme consisting of a bandpass filter with an avalanche photodetector (APD), and the in situ online detection of a 30â ns, 40 kHz high-frequency pulse signal during laser scanning was realized. Combined with a field programmable gate array (FPGA) digital control unit, online feedback and closed-loop control were achieved at the kHz level, and the adaptive intelligent control of material interfaces and laser processing parameters was achieved. This excellently demonstrated the feasibility and flexibility of LAPT for processing arbitrary multilayer dissimilar materials.