Digital Detection of Single Virus Particles by Multi-Spot, Label-Free Imaging Biosensor on Anti-Reflective Glass.

Rapid detection of whole virus particles in biological or environmental samples represents an unmet need for the containment of infectious diseases. Here, an optical device enabling the enumeration of single virion particles binding on antibody or aptamers immobilized on a surface with anti-reflective coating is described. In this regime, nanoparticles adhering to the sensor surface provide localized contributions to the reflected field that become detectable because of their mixing with the interfering waves in the reflection direction. Thus, these settings are exploited to realize a scan-free, label-free, micro-array-type digital assay on a disposable cartridge, in which the virion counting takes place in wide field-of-view imaging. With this approach we could quantify, by enumeration, different variants of SARS-CoV-2 virions interacting with antibodies and aptamers immobilized on different spots. For all tested variants, the aptamers showed larger affinity but lower specificity relative to the antibodies. It is found that the combination of different probes on the same surface enables increasing specificity of detection and dynamic range.

Active Opto-Magnetic Biosensing with Silicon Microring Resonators.

Integrated optical biosensors are gaining increasing attention for their exploitation in lab-on-chip platforms. The standard detection method is based on the measurement of the shift of some optical quantity induced by the immobilization of target molecules at the surface of an integrated optical element upon biomolecular recognition. However, this requires the acquisition of said quantity over the whole hybridization process, which can take hours, during which any external perturbation (e.g., temperature and mechanical instability) can seriously affect the measurement and contribute to a sizeable percentage of invalid tests. Here, we present a different assay concept, named Opto-Magnetic biosensing, allowing us to optically measure off-line (i.e., post hybridization) tiny variations of the effective refractive index seen by microring resonators upon immobilization of magnetic nanoparticles labelling target molecules. Bound magnetic nanoparticles are driven in oscillation by an external AC magnetic field and the corresponding modulation of the microring transfer function, due to the effective refractive index dependence on the position of the particles above the ring, is recorded using a lock-in technique. For a model system of DNA biomolecular recognition we reached a lowest detected concentration on the order of 10 pm, and data analysis shows an expected effective refractive index variation limit of detection of 7.5×10-9 RIU, in a measurement time of just a few seconds.

EV Separation: Release of Intact Extracellular Vesicles Immunocaptured on Magnetic Particles.

Extracellular vesicles (EVs) have attracted considerable interest due to their role in cell-cell communication, disease diagnosis, and drug delivery. Despite their potential in the medical field, there is no consensus on the best method for separating micro- and nanovesicles from cell culture supernatant and complex biological fluids. Obtaining a good recovery yield and preserving physical characteristics is critical for the diagnostic and therapeutic use of EVs. The separation of a single class of EVs, such as exosomes, is complex because blood and cell culture media contain many nanoparticles in the same size range. Methods that exploit immunoaffinity capture provide high-purity samples and overcome the issues of currently used separation methods. However, the release of captured nanovesicles usually requires harsh conditions that hinder their use in certain types of downstream analysis. A novel capture and release approach for small extracellular vesicles (sEVs) is presented based on DNA-directed immobilization of antiCD63 antibody. The flexible DNA linker increases the capture efficiency and allows for releasing EVs by exploiting the endonuclease activity of DNAse I. This separation protocol works under mild conditions, enabling the release of vesicles suitable for analysis by imaging techniques. In this study, sEVs recovered from plasma were characterized by established techniques for EV analysis, including nanoparticle tracking and transmission electron microscopy.

CovidArray: A Microarray-Based Assay with High Sensitivity for the Detection of Sars-Cov-2 in Nasopharyngeal Swabs.

A new coronavirus (SARS-CoV-2) caused the current coronavirus disease (Covid-19) epidemic. Reverse transcription-quantitative polymerase chain reaction (RT-qPCR) is used as the gold standard for clinical detection of SARS-CoV-2. Under ideal conditions, RT-qPCR Covid-19 assays have analytical sensitivity and specificity greater than 95%. However, when the sample panel is enlarged including asymptomatic individuals, the sensitivity decreases and false negatives are reported. Moreover, RT-qPCR requires up to 3-6 h with most of the time involved in RNA extraction from swab samples. We introduce CovidArray, a microarray-based assay, to detect SARS-CoV-2 markers N1 and N2 in the nasopharyngeal swabs. The method is based on solid-phase hybridization of fluorescently-labeled amplicons upon RNA extraction and reverse transcription. This approach combines the physical-optical properties of the silicon substrate with the surface chemistry used to coat the substrate to obtain a diagnostic tool of great sensitivity. Furthermore, we used an innovative approach, RNAGEM, to extract and purify viral RNA in less than 15 min. We correctly assigned 12 nasopharyngeal swabs, previously analyzed by RT-qPCR. Thanks to the CovidArray sensitivity we were able to identify a false-negative sample. CovidArray is the first DNA microarray-based assay to detect viral genes in the swabs. Its high sensitivity and the innovative viral RNA extraction by RNAGEM allows the reduction of both the amount of false-negative results and the total analysis time to about 2 h.

Non-Langmuir Kinetics of DNA Surface Hybridization.

Hybridization of complementary single strands of DNA represents a very effective natural molecular recognition process widely exploited for diagnostic, biotechnology, and nanotechnology applications. A common approach relies on the immobilization on a surface of single-stranded DNA probes that bind complementary targets in solution. However, despite the deep knowledge on DNA interactions in bulk solution, the modeling of the same interactions on a surface are still challenging and perceived as strongly system dependent. Here, we show that a two-dimensional analysis of the kinetics of hybridization, performed at different target concentrations and probe surface densities by a label-free optical biosensor, reveals peculiar features inconsistent with an ideal Langmuir-like behavior. We propose a simple non-Langmuir kinetic model accounting for an enhanced electrostatic repulsion originating from the surface immobilization of nucleic acids and for steric hindrance close to full hybridization of the surface probes. The analysis of the kinetic data by the model enables quantifying the repulsive potential at the surface, as well as retrieving the kinetic parameters of isolated probes. We show that the strength and the kinetics of hybridization at large probe density can be improved by a three-dimensional immobilization strategy of probe strands with a double-stranded linker.

Simultaneous evaluation of multiple microarray surface chemistries through real-time interferometric imaging.

Surface chemistry is a crucial aspect for microarray modality biosensor development. The immobilization capability of the functionalized surface is indeed a limiting factor for the final yield of the binding reaction. In this work, we were able to simultaneously compare the functionality of protein ligands that were locally immobilized on different polymers, while on the same solid support, therefore demonstrating a new way of multiplexing. Our goal was to investigate, in a single experiment, both the immobilization efficiency of a group of reactive polymers and the resulting affinity of the tethered molecules. This idea was demonstrated by spotting many reactive polymers on a Si/SiO2 chip and depositing the molecular probes on the spots immediately after. As a proof of concept, we focused on which polymers would better immobilize a model protein (α-Lactalbumin) and a peptide (LAC-1). We successfully showed that this protocol is applicable to proteins and peptides with a good efficiency. By means of real-time binding measurements performed with the interferometric reflectance imaging sensor (IRIS), local functionalization proved to be comparable to the classical flat coating solution. The final outcome highlights the multiplexing power of this method: first, it allows to characterize dozens of polymers at once. Secondly, it removes the limitation, related to coated surfaces, that only molecules with the same functional groups can be tethered to the same solid support. By applying this protocol, many types of molecules can be studied simultaneously and immobilization for each probe can be individually optimized.

Towards precision medicine: the role and potential of protein and peptide microarrays.

Although the traditional strategy of developing general medical treatments for heterogeneous patient populations has a well-established track record, the acknowledgment that one-size-does-not-fit-all is pushing health-care to enter a new era of tailored interventions. The advent of precision medicine is fueled by the high-throughput analysis of individual DNA variants and mRNA expression profiles. However, due to the role of proteins in providing a more direct view of disease states than genomics alone, the ability to comprehensively analyze protein alterations and post translational modifications (PTMs) is a necessary step to unravel disease mechanisms, develop novel biomarkers and targeted therapies. Protein and peptide microarrays can play a major role in this frame, due to high-throughput, low sample consumption and wide applicability. Here, their current role and potentialities are discussed through the review of some promising applications in the fields of PTMs analysis, enzyme screening, high-content immune-profiling and the phenotyping of extracellular vesicles.

Computational Analysis of Dengue Virus Envelope Protein (E) Reveals an Epitope with Flavivirus Immunodiagnostic Potential in Peptide Microarrays.

The mosquito-borne viral disease caused by the Dengue virus is an expanding global threat. Diagnosis in low-resource-settings and epidemiological surveillance urgently requires new immunoprobes for serological tests. Structure-based epitope prediction is an efficient method to design diagnostic peptidic probes able to reveal specific antibodies elicited in response to infections in patients' sera. In this study, we focused on the Dengue viral envelope protein (E); computational analyses ranging from extensive Molecular Dynamics (MD) simulations and energy-decomposition-based prediction of potentially immunoreactive regions identified putative epitope sequences. Interestingly, one such epitope showed internal dynamic and energetic properties markedly different from those of other predicted sequences. The epitope was thus synthesized as a linear peptide, modified for chemoselective immobilization on microarrays and used in a serological assay to discriminate Dengue-infected individuals from healthy controls. The synthetic epitope probe showed a diagnostic performance comparable to that of the full antigen in terms of specificity and sensitivity. Given the high level of sequence identity among different flaviviruses, the epitope was immune-reactive towards Zika-infected sera as well. The results are discussed in the context of the quest for new possible structure-dynamics-based rules for the prediction of the immunoreactivity of selected antigenic regions with potential pan-flavivirus immunodiagnostic capacity.

COLD-PCR and microarray: two independent highly sensitive approaches allowing the identification of fetal paternally inherited mutations in maternal plasma.

BACKGROUND: Until now, non-invasive prenatal diagnosis of genetic diseases found only limited routine applications. In autosomal recessive diseases, it can be used to determine the carrier status of the fetus through the detection of a paternally inherited disease allele in cases where maternal and paternal mutated alleles differ. METHODS: Conditions for non-invasive identification of fetal paternally inherited mutations in maternal plasma were developed by two independent approaches: coamplification at lower denaturation temperature-PCR (COLD-PCR) and highly sensitive microarrays. Assays were designed for identifying 14 mutations, 7 causing ß-thalassaemia and 7 cystic fibrosis. RESULTS: In total, 87 non-invasive prenatal diagnoses were performed by COLD-PCR in 75 couples at risk for ß-thalassaemia and 12 for cystic fibrosis. First, to identify the more appropriate methodology for the analysis of minority mutated fetal alleles in maternal plasma, both fast and full COLD-PCR protocols were developed for the most common Italian ß-thalassaemia Cd39 and IVSI.110 mutations. In 5 out of 31 samples, no enrichment was obtained with the fast protocol, while full COLD-PCR provided the correct fetal genotypes. Thus, full COLD-PCR protocols were developed for all the remaining mutations and all analyses confirmed the fetal genotypes obtained by invasive prenatal diagnosis. Microarray analysis was performed on 40 samples from 28 couples at risk for ß-thalassaemia and 12 for cystic fibrosis. Results were in complete concordance with those obtained by both COLD-PCR and invasive procedures. CONCLUSIONS: COLD-PCR and microarray approaches are not expensive, simple to handle, fast and can be easily set up in specialised clinical laboratories where prenatal diagnosis is routinely performed.

Screening Complex Biological Samples with Peptide Microarrays: The Favorable Impact of Probe Orientation via Chemoselective Immobilization Strategies on Clickable Polymeric Coatings.

The generation of robust analytical data using microarray platforms strictly relies on optimal ligand-target interaction at the sensor surface, which, in turn, is inherently bound to the correct immobilization scheme of the interrogated bioprobes. In the present work, we performed a rigorous comparative analysis of the impact of peptide ligands immobilization strategy in the screening of Burkholderia cepacia complex (BCC) infections in patients affected by cystic fibrosis (CF). We generated arrays of previously validated Burkholderia derived peptide probes that were selectively oriented on polymeric coatings by means of different click-type reactions including thiol maleimide, copper-catalyzed azide-alkyne cycloaddition (CuAAC), and strain-promoted azide-alkyne cycloaddition (SPAAC). We compared immobilization efficiency among the different chemoselective reactions, and we evaluated diagnostic performances at a statistically significant level, also in contrast to random immobilization strategies. Our findings clearly support the favorable role of correct bioprobe orientation in discriminating seronegative from infected individuals and, in the last analysis, in generating more-reliable and more-reproducible data. Spacing biomolecules from the sensor surface by means of small hydrophilic linkers also positively affects the analytical performance and leads to increased statistical significance of data. Overall, all of the click immobilization strategies that were considered displayed a good efficiency. Interestingly, SPAAC-mediated conjugation using DBCO cyclooctyne for some peptides resulted in sequence-dependent autofluorescence in the Cy5 emission range wavelength, which could be circumvented by using a different fluorescence detection channel. On the basis of our results, we critically discuss the immobilization parameters that need to be carefully considered for peptide ligand immobilization purposes.

Synthesis of Clickable Coating Polymers by Postpolymerization Modification: Applications in Microarray Technology.

In this paper, we report on the postpolymerization modification (PPM) of a polymer to introduce new functionalities that enable click chemistry reactions for microarray applications. The parent polymer, named copoly(DMA-NAS-MAPS), is composed of N,N-dimethylacrylamide (DMA), a monomer that self-adsorbs onto different materials through weak interactions such as hydrogen bonding or van der Waals forces, 3-(trimethoxysilyl)propyl methacrylate (MAPS) that strengthens the stability of the coating through the formation of covalent bonds with siloxane groups on the surface to be coated, and N-acryloyloxysuccinimide (NAS), an active ester group, highly reactive toward nucleophiles, which enables bioprobe immobilization. This copolymer has been widely exploited to coat surfaces for microarray applications but exhibits some limitations because of the potential hydrolysis of the active ester (NHS ester). The degradation of the NHS ester hampers the use of this coating in some situations, for example, when probe immobilization cannot be accomplished through a microspotting situation, but in large volumes, for example, in microchannel derivatization or micro-/nanoparticle functionalization. To overcome the limitations of NHS esters, we have developed a family of polymers that originate from the common copolymer precursor, by reacting the active ester contained in the polymer chain with a bifunctional amine. In particular, the functional groups introduced in the polymer using PPM enable click chemistry reactions such as azide/alkyne or thiol/maleimide "click" reactions, with suitably modified biomolecules. The advantages of such reactions are quantitative yields, orthogonality of functional groups, and insensitivity of the reaction to pH. The new click functionalities, inserted with quantitative yields, improve the stability of the coating, enabling the attachment of biomolecules directly from a solution and avoiding the spotting of reduced volumes (pL) of probes. Finally, we have demonstrated the applicability of the click surfaces in a highly effective solid-phase PCR for the genotyping of the G12D KRAS mutation.

Click Chemistry Immobilization of Antibodies on Polymer Coated Gold Nanoparticles.

The goal of this work is to develop an innovative approach for the coating of gold nanoparticles (AuNPs) with a synthetic functional copolymer. This stable coating with a thickness of few nanometers provides, at the same time, stabilization and functionalization of the particles. The polymeric coating consists of a backbone of polydimethylacrylamide (DMA) functionalized with an alkyne monomer that allows the binding of azido modified molecules by Cu(I)-catalyzed azide/alkyne 1,3-dipolar cycloaddition (CuAAC, click chemistry). The thin polymer layer on the surface stabilizes the colloidal suspension whereas the alkyne functions pending from the backbone are available for the reaction with azido-modified proteins. The reactivity of the coating is demonstrated by immobilizing an azido modified anti-mouse IgG antibody on the particle surface. This approach for the covalent binding of antibody to a gold-NPs is applied to the development of gold labels in biosensing techniques.

Reactive Microcontact Printing of DNA Probes on (DMA-NAS-MAPS) Copolymer-Coated Substrates for Efficient Hybridization Platforms.

High-performing hybridization platforms fabricated by reactive microcontact printing of DNA probes are presented. Multishaped PDMS molds are used to covalently bind oligonucleotides over a functional copolymer (DMA-NAS-MAPS) surface. Printed structures with minimum width of about 1.5 µm, spaced by 10 µm, are demonstrated, with edge corrugation lower than 300 nm. The quantification of the immobilized surface probes via fluorescence imaging gives a remarkable concentration of 3.3 × 10(3) oligonucleotides/µm(2), almost totally active when used as probes in DNA-DNA hybridization assays. Indeed, fluorescence and atomic force microscopy show a 95% efficiency in target binding and uniform DNA hybridization over printed areas.

Multispot, label-free biodetection at a phantom plastic-water interface.

Recognizing and quantifying specific biomolecules in aqueous samples are constantly needed in research and diagnostic laboratories. As the typical detection procedures are rather lengthy and involve the use of labeled secondary antibodies or other agents to provide a signal, efforts have been made over the last 10 y to develop alternative label-free methods that enable direct detection. We propose and demonstrate an extremely simple, low-cost, label-free biodetector based on measuring the intensity of light reflected by the interface between a fluid sample and an amorphous fluoropolymer substrate having a refractive index very close to that of water and hosting various antibodies immobilized in spots. Under these index-matching conditions, the amount of light reflected by the interface allows straightforward quantification of the amount of antigen binding to each spot. Using antibodies targeting heterologous immunoglobulins and antigens commonly used as markers for diagnoses of hepatitis B and HIV, we demonstrate the limit of detection of a few picograms per square millimeter of surface-bound molecules. We also show that direct and real-time access to the amount of binding molecules allows the precise extrapolation of adhesion rates, from which the concentrations of antigens in solution can be estimated down to fractions of nanograms per milliliter.

Controlling electroosmotic flows by polymer coatings: A joint experimental-theoretical investigation.

We analyze the electroosmotic flow (EOF) of an electrolytic solution in a polymer coated capillary electrophoresis tube. The polymeric density, charge, thickness, and the capillary tube charge vary as a function of pH and produce a non-trivial modulation of the EOF, including a flow reversal at acid pH conditions. By means of a theoretical argument and numerical simulations, we recover the experimental curve for the EOF, providing a firm approach for predictive analysis of electroosmosis under different polymeric coating conditions. A proposed application of the approach is to determine the near-wall charge of the coating to be used for further quantitative analysis of the electroosmotic flow and mobility.

Performance of a novel sieving matrix of poly(vinyl alcohol)/acrylamide copolymer in electrophoretic separations of high molecular weight proteins from red cell membrane.

The analysis of high molecular weight (HMW) proteins from complex mixtures is still a challenge in proteomics. This work introduces a novel hydrogel obtained by the copolymerization of an allyl-PVA derivative with acrylamide and bisacrylamide and applies this matrix to the electrophoretic separation of HMW proteins. By inducing gelation of polyacrylamide in the presence of variable amounts of allyl-PVA, it is possible to control and vary the average gel porosity. This gel is easy to produce and handle and offers the advantage of being highly mechanically resistant and macroporous. The new matrix was tested in mono-dimensional separations of complex protein mixtures extracted from red cell membranes with different detergents. The improved performance of this macroporous matrix allowed to identify new proteins by MS and immunoblot analysis using specific antibodies. In particular, the resolution of proteins ranging in size between 97 and 279 kDa was greatly improved here compared to standard polyacrylamide gels, suggesting that this matrix can be a useful tool in routine analysis of HMW proteins in cell biology.

Universal hydrophilic coating of thermoplastic polymers currently used in microfluidics.

A number of materials used to fabricate disposable microfluidic devices are hydrophobic in nature with water contact angles on their surface ranging from 80° to over 100°. This characteristic makes them unsuitable for a number of microfluidic applications. Both the wettability and analyte adsorption parameters are highly dependent on the surface hydrophobicity. In this article, we propose a general method to coat the surface of five materials: polydimethylsiloxane (PDMS), cyclic olefin copolymer (COC), polyethylene terephthalate (PET), polycarbonate (PC), and polytetrafluoroethylene (PTFE). This fast and robust process, which is easily implementable in any laboratory including microfabrication clean room facilities, was devised by combining gas-phase and wet chemical modification processes. Two different coatings that improve the surface hydrophilicity were prepared via the "dip and rinse" approach by immersing the plasma oxidized materials into an aqueous solution of two different poly(dimethylacrylamide) copolymers incorporating a silane moiety and functionalized with either N-acryloyloxysuccinimide (NAS) (poly(DMA-NAS-MAPS) or glycidyl methacrylate (GMA) (poly(DMA-GMA-MAPS). The coating formation was confirmed by contact angle (CA) analysis comparing the variation of CAs of uncoated and coated surfaces subjected to different aging treatments. The antifouling character of the polymer was demonstrated by fluorescence and interferometric detection of proteins adsorbed on the surafce. This method is of great interest in microfluidics due to its broad applicability to a number of materials with varying chemical compositions.

Protein microarray technology: how far off is routine diagnostics?

The nature of protein microarray platforms is favorable for multiplexing, leading to the development of tools for personalised medicine and highly precise diagnostics. However, to date, only a limited number of protein microarrays are available in the in vitro diagnostics (IVD) market. This review article will focus on the following operational challenges that are crucial for the use of microarrays in clinical settings: (1) probe printing and quality control; (2) procurement of bio-reagents and antibody cross-reactivity; (3) mass transport limitations and assay automation; (4) calibration and quantification. A selection of microarray assays applicable to IVD and a summary of the diagnostic products currently available on the market are provided.

Neutral polymers as coatings for high resolution electrophoretic separation of Aß peptides on glass microchips.

This study reports a comparison of the performances of two neutral polymers, poly ethylene-oxide (PEO) and poly(dimethylacrylamide-co-allyl glycidyl ether) (EpDMA), in glass microchips to achieve zone electrophoresis separation of several truncated forms of beta amyloid (Aß) peptides, sharing very similar structures. The peptides were derivatized by FluoProbes 488 NHS to allow their fluorescence detection. Two protocols based either on PEO or EpDMA led to good pH stabilities in addition to a significant reduction of the electroosmotic flow. These two polymer coatings allowed repeatable analyses and high resolution for the simultaneous analysis of three Aß peptides, Aß 1-38, Aß 1-40 and Aß 1-42, considered as potential biomarkers of Alzheimer's disease. A recovery study showed that EpDMA was superior in reducing the adsorption of the Aß peptides on the coated inner wall. Finally, the separation method relying on the EpDMA coated microchips was validated as linear using a calibration curve and the LOD was estimated to be close to 200 nM. Despite very short migration distances, different N-terminal or C-terminal truncated Aß peptides, corresponding to promising biomarker combinations for the future diagnostic, were fully resolved. The method was successfully applied to detect these peptides in spiked cerebrospinal fluid and has provided a first achievement towards the development of a microsystem that would integrate preconcentration and separation steps.

Extracellular vesicles selective capture by peptide-functionalized hollow fiber membranes.

Recently, membrane devices and processes have been applied for the separation and concentration of subcellular components such as extracellular vesicles (EVs), which play a diagnostic and therapeutic role in many pathological conditions. However, the separation and isolation of specific EV populations from other components found in biological fluids is still challenging. Here, we developed a peptide-functionalized hollow fiber (HF) membrane module to achieve the separation and enrichment of highly pure EVs derived from the culture media of human cardiac progenitor cells. The strategy is based on the functionalization of PSf HF membrane module with BPt, a peptide sequence able to bind nanovesicles characterized by highly curved membranes. HF membranes were modified by a nanometric coating with a copoly azide polymer to limit non-specific interactions and to enable the conjugation with peptide ligand by click chemistry reaction. The BPt-functionalized module was integrated into a TFF process to facilitate the design, rationalization, and optimization of EV isolation. This integration combined size-based transport of species with specific membrane sensing ligands. The TFF integrated BPt-functionalized membrane module demonstrated the ability to selectively capture EVs with diameter < 200 nm into the lumen of fibers while effectively removing contaminants such as albumin. The captured and released EVs contain the common markers including CD63, CD81, CD9 and syntenin-1. Moreover, they maintained a round shape morphology and structural integrity highlighting that this approach enables EVs concentration and purification with low shear stress. Additionally, it achieved the removal of contaminants such as albumin with high reliability and reproducibility, reaching a removal of 93%.