Delayed use of bioenergy crops might threaten climate and food security.

The potential of mitigation actions to limit global warming within 2 °C (ref. 1) might rely on the abundant supply of biomass for large-scale bioenergy with carbon capture and storage (BECCS) that is assumed to scale up markedly in the future2-5. However, the detrimental effects of climate change on crop yields may reduce the capacity of BECCS and threaten food security6-8, thus creating an unrecognized positive feedback loop on global warming. We quantified the strength of this feedback by implementing the responses of crop yields to increases in growing-season temperature, atmospheric CO2 concentration and intensity of nitrogen (N) fertilization in a compact Earth system model9. Exceeding a threshold of climate change would cause transformative changes in social-ecological systems by jeopardizing climate stability and threatening food security. If global mitigation alongside large-scale BECCS is delayed to 2060 when global warming exceeds about 2.5 °C, then the yields of agricultural residues for BECCS would be too low to meet the Paris goal of 2 °C by 2200. This risk of failure is amplified by the sustained demand for food, leading to an expansion of cropland or intensification of N fertilization to compensate for climate-induced yield losses. Our findings thereby reinforce the urgency of early mitigation, preferably by 2040, to avoid irreversible climate change and serious food crises unless other negative-emission technologies become available in the near future to compensate for the reduced capacity of BECCS.

Nitrogen-Doped Starbons®: Methodology Development and Carbon Dioxide Capture Capability.

Five nitrogen sources (glycine, ß-alanine, urea, melamine and nicotinamide) and three heating methods (thermal, monomodal microwave and multimodal microwave) are used to prepare nitrogen-doped Starbons® derived from starch. The materials are initially produced at 250-300 °C (SNx 300y ), then heated in vacuo to 800 °C to produce nitrogen-doped SNx 800y 's. Melamine gives the highest nitrogen incorporation without destroying the Starbon® pore structure and the microwave heating methods give higher nitrogen incorporations than thermal heating. The carbon dioxide adsorption capacities of the nitrogen-doped Starbons® determined gravimetrically, in many cases exceed those of S300 and S800. The carbon dioxide, nitrogen and methane adsorption isotherms of the most promising materials are measured volumetrically. Most of the nitrogen-doped materials show higher carbon dioxide adsorption capacities than S800, but lower methane and nitrogen adsorption capacities. As a result, the nitrogen-doped Starbons® exhibit significantly enhanced carbon dioxide versus nitrogen and methane versus nitrogen selectivities compared to S800.

Controlling In Planta Gold Nanoparticle Synthesis and Size for Catalysis.

Gold nanoparticles (Au-NPs) are used as catalysts for a diverse range of industrial applications. Currently, Au-NPs are synthesized chemically, but studies have shown that plants fed Au deposit, this element naturally as NPs within their tissues. The resulting plant material can be used to make biomass-derived catalysts. In vitro studies have shown that the addition of specific, short (∼10 amino acid) peptide/s to solutions can be used to control the NP size and shape, factors that can be used to optimize catalysts for different processes. Introducing these peptides into the model plant species, Arabidopsis thaliana (Arabidopsis), allows us to regulate the diameter of nanoparticles within the plant itself, consequently influencing the catalytic performance in the resulting pyrolyzed biomass. Furthermore, we show that overexpressing the copper and gold COPPER TRANSPORTER 2 (COPT2) in Arabidopsis increases the uptake of these metals. Adding value to the Au-rich biomass offers the potential to make plant-based remediation and stabilization of mine wastes financially feasible. Thus, this study represents a significant step toward engineering plants for the sustainable recovery of finite and valuable elements from our environment.

Efficient adsorption of bulky reactive dyes from water using sustainably-derived mesoporous carbons.

Hazardous reactive dyes can cause serious environmental problems, as they are difficult to remove from water using conventional adsorbents due to their large molecular sizes and bulky structures. Sustainable mesoporous carbons derived from alginic acid demonstrated promising adsorbent capacity for several representative industrial bulky reactive dye molecules that account for almost 30% of the global textile dye market: Procion Yellow H-XEL (PY), Remazol Black (RB), Procion Crimson H-XEL (PC) and Procion Navy H-XEL (PN). These new adsorbents showed high mesoporosity (>90%) and large pore diameters (>20 nm) facilitating more straightforward and efficient adsorption and desorption processes when compared with predominately microporous activated carbon (AC), Norit, of similar surface chemistry, or with Silica gel (Sgel) that shows good mesoporosity but is hydrophilic. Their adsorption capacity was also significantly higher than that of both AC and Sgel, verifying suitability for bulky dye elimination from wastewater. Adsorption kinetic studies showed a best fit with the Elovich model, indicating a heterogeneous surface adsorption process. The adsorption isotherm data was best represented via the Toth model for almost all adsorbent/dye systems (R2 ≥ 0.98), validating the results of the Elovich model whereby the adsorbent is structurally heterogenous with multilayer dye coverage. From thermodynamic analysis, the derived parameters of ΔG (-11.6 âˆ¼ -6.2 kJ/mol), ΔH and ΔS demonstrate a spontaneous, enthalpy controlled adsorption process that was exothermic for RB (-10.0 kJ/mol) and PC (-23.9 kJ/mol) and endothermic for PY (3.9 kJ/mol) and PN (13.2 kJ/mol). Overall these alginic acid based mesoporous carbons are cost-effective, sustainable and efficient alternatives to current predominantly microporous adsorbent systems.

Reaction Optimization for Greener Chemistry with a Comprehensive Spreadsheet Tool.

Green chemistry places an emphasis on safer chemicals, waste reduction, and efficiency. Processes should be optimized with green chemistry at the forefront of decision making, embedded into research at the earliest stage. To assist in this endeavor, we present a spreadsheet that can be used to interpret reaction kinetics via Variable Time Normalization Analysis (VTNA), understand solvent effects with linear solvation energy relationships (LSER), and calculate solvent greenness. With this information, new reaction conditions can be explored in silico, calculating product conversions and green chemistry metrics prior to experiments. The application of this tool was validated with literature case studies. Reaction performance was predicted and then confirmed experimentally for examples of aza-Michael addition, Michael addition, and an amidation. The combined analytical package presented herein permits a thorough examination of chemical reactions, so that the variables that control reaction chemistry can be understood, optimized, and made greener for research and education purposes.

Urgently reveal longly hidden toxicant in a familiar fabrication process of biomass-derived environment carbon material.

Biomass-derived N-doped carbon (BNC) is an important environmental material and widely used in the fields of water purification and soil remediation. However, the toxicant in the commonly used synthesis process of BNC materials have been largely ignored. Herein, we firstly report the presence of a highly toxic by-product (KCN) in the activation process of BNC materials consequential of the carbothermal reduction reaction. Because this carbothermal reduction reaction also regulates the N-doping and pore development of BNC materials, the KCN content directly relates with the properties of BNC material properties. Accordingly, a high KCN content (∽ 611 mg) can occur in the production process of per g BNC material with high specific surface area (∽ 3600 m2/g). Because the application performance of BNC material is determined by the surface area and available N doping, therefore, production of a BNC material with high performance entails high risk. Undoubtedly, this study proves a completely new risk recognition on a familiar synthesis process of biomass-based material. And, strict protective device should be taken in fabrication process of biomass-derived carbon material.

Highly Efficient and Selective N-Formylation of Amines with CO2 and H2 Catalyzed by Porous Organometallic Polymers.

The valorization of carbon dioxide (CO2 ) to fine chemicals is one of the most promising approaches for CO2 capture and utilization. Herein we demonstrated a series of porous organometallic polymers could be employed as highly efficient and recyclable catalysts for this purpose. Synergetic effects of specific surface area, iridium content, and CO2 adsorption capability are crucial to achieve excellent selectivity and yields towards N-formylation of diverse amines with CO2 and H2 under mild reaction conditions even at 20 ppm catalyst loading. Density functional theory calculations revealed not only a redox-neutral catalytic pathway but also a new plausible mechanism with the incorporation of the key intermediate formic acid via a proton-relay process. Remarkably, a record turnover number (TON=1.58×106 ) was achieved in the synthesis of N,N-dimethylformamide (DMF), and the solid catalysts can be reused up to 12 runs, highlighting their practical potential in industry.

Biorenewable hydrogen production through biomass gasification: A review and future prospects.

Hydrogen is recognized as one of the cleanest energy carriers, which can be produced from renewable biomass as a promising feedstock to achieve sustainable bioeconomy. Thermochemical technologies (e.g., gasification and pyrolysis) are the main routes for hydrogen production from biomass. Although biomass gasification, including steam gasification and supercritical water gasification, shows a high potential in field-scale applications, the selectivity and efficiency of hydrogen production need improvement to secure cost-effective industrial applications with high atom economy. This article reviews the two main-stream biomass-to-hydrogen technologies and discusses the significance of operating conditions and considerations in the catalytic system design. Challenges and prospects of hydrogen production via biomass gasification are explored to advise on the critical information gaps that require future investigations.

Selective Catalytic Dehydrogenative Oxidation of Bio-Polyols to Lactic Acid.

The global demand for lactic acid (LA) is increasing due to its successful application as monomer for the manufacture of bioplastics. Although N-heterocyclic carbene (NHC) iridium complexes are promising molecular catalysts for LA synthesis, their instabilities have hindered their utilization especially in commercial applications. Here, we report that a porous self-supported NHC-iridium coordination polymer can efficiently prevent the clusterization of corresponding NHC-Ir molecules and can function as a solid molecular recyclable catalyst for dehydrogenation of bio-polyols to form LA with excellent activity (97 %) and selectivity (>99 %). A turnover number of up to 5700 could be achieved in a single batch, due to the synergistic participation of the Ba2+ and hydroxide ions, as well as the blockage of unwanted pathways by adding methanol. Our findings demonstrate a potential route for the industrial production of LA from cheap and abundant bio-polyols, including sorbitol.

A Method of Calculating the Kamlet-Abboud-Taft Solvatochromic Parameters Using COSMO-RS.

There is demand for safer and bio-based solvents, brought on by legislation and sustainability objectives. The prediction of physical properties is highly desirable to help design new molecules. Here we present an in silico approach to obtain calculated Kamlet-Abboud-Taft solvatochromic parameters using virtual experiments. The tautomerisation equilibrium of methyl acetoacetate and dimedone was calculated in different solvents with COSMO-RS theory and converted into estimates of solvent dipolarity and hydrogen bond accepting ability, respectively. Hydrogen bond donating ability was calculated as a function of the electron deficient surface area on protic solvents. These polarity descriptors correlate with rate constants and equilibria, and so ability of calculated Kamlet-Abboud-Taft solvatochromic parameters to recreate experimental free energy relationships was tested with sixteen case studies taken from the literature. The accuracy of the calculated parameters was also satisfactory for solvent selection, as demonstrated with a 1,4-addition reaction and a multicomponent heterocycle synthesis.

Green Machine: A Card Game Introducing Students to Systems Thinking in Green Chemistry by Strategizing the Creation of a Recycling Plant.

Green Machine is a competitive strategy card game facilitating a systems thinking approach to learning recycling processes and green chemistry in accordance with the United Nations Sustainable Development Goals. Players compete to be the first to be able to launch their recycling plant by collecting a series of playing cards. Players must use interpersonal skills to consider the interconnected systems while showing an appreciation for commercial awareness and versatility, as dynamic problem solving (reflecting real-world scenarios) is required to play the game successfully. The card game was implemented with 19 U.K. graduate students and 29 U.S. second-year undergraduate students. Survey feedback showed that Green Machine was an innovative resource that was enjoyable to play and engaged students in learning recycling processes through systems thinking. On the basis of pre- and post-test questions to evaluate learning gain, Green Machine is a helpful resource to introduce students not only to green chemistry and sustainability but also to taking a systems thinking approach to learning.

Industry-Informed Workshops to Develop Graduate Skill Sets in the Circular Economy Using Systems Thinking.

Increasing demand for chemicals worldwide, depleting resources, consumer pressure, stricter legislation, and the rising cost of waste disposal are placing increasing pressure on chemical and related industries. For any organization to survive in the current arena of growing climate change laws and regulations, and increasing public influence, the issue of sustainability must be fundamental to the way it operates. A sustainable manufacturing approach will enable economic growth to be combined with environmental and social sustainability and will be realized via collaboration between a multidisciplinary community including chemists, biologists, engineers, environmental scientists, economists, experts in management, and policy makers. Hence, employees with new skills, knowledge, and experience are essential. To realize this approach, the design and development of a series of workshops encompassing systems thinking are presented here. After close consultation with industry, an annual program of interactive workshops has been designed for graduate students to go beyond examining the "greening" of chemical reactions, processes, and products, and instead embed a systems thinking approach to learning. The workshops provide a valuable insight into the issues surrounding sustainable manufacturing covering change management, commercialization, environmental impact, circular economy, legislation, and bioresources incorporating the conversion of waste into valuable products. The multidisciplinary course content incorporates industrial case studies, providing access to real business issues, and is delivered by experts from academic departments across campus and industry.

Challenges in the development of bio-based solvents: a case study on methyl(2,2-dimethyl-1,3-dioxolan-4-yl)methyl carbonate as an alternative aprotic solvent.

Many traditional solvents have drawbacks including sustainability and toxicity issues. Legislation, such as REACH, is driving the move towards less hazardous chemicals and production processes. Therefore, safer bio-based solvents need to be developed. Herein, a 10 step method has been proposed for the development of new bio-based solvents, which utilises a combination of in silico modelling of Hansen solubility parameters (HSPs), experimental Kamlet-Abboud-Taft parameters, a selection of green synthetic routes followed by application testing and toxicity measurements. The challenges that the chemical industry face in the development of new bio-based solvents are highlighted through a case study on methyl(2,2-dimethyl-1,3-dioxolan-4-yl)methyl carbonate (MMC), which can be synthesised from glycerol. Although MMC is an attractive candidate as a replacement solvent, simply being bio-derived is not enough for a molecule to be regarded as green. The methodology of solvent development described here is a broadly applicable protocol that will indicate if a new bio-based solvent is functionally proficient, and will also highlight the importance of early stage Kamlet-Abboud-Taft parameters determination and toxicity testing in the development of a green solvent.

Polysaccharide-derived mesoporous materials (Starbon®) for sustainable separation of complex mixtures.

The recovery and separation of high value and low volume extractives are a considerable challenge for the commercial realisation of zero-waste biorefineries. Using solid-phase extractions (SPE) based on sustainable sorbents is a promising method to enable efficient, green and selective separation of these complex extractive mixtures. Mesoporous carbonaceous solids derived from renewable polysaccharides are ideal stationary phases due to their tuneable functionality and surface structure. In this study, the structure-separation relationships of thirteen polysaccharide-derived mesoporous materials and two modified types as sorbents for ten naturally-occurring bioactive phenolic compounds were investigated. For the first time, a comprehensive statistical analysis of the key molecular and surface properties influencing the recovery of these species was carried out. The obtained results show the possibility of developing tailored materials for purification, separation or extraction, depending on the molecular composition of the analyte. The wide versatility and application span of these polysaccharide-derived mesoporous materials offer new sustainable and inexpensive alternatives to traditional silica-based stationary phases.

Toward Financially Viable Phytoextraction and Production of Plant-Based Palladium Catalysts.

Although a promising technique, phytoextraction has yet to see significant commercialization. Major limitations include metal uptake rates and subsequent processing costs. However, it has been shown that liquid-culture-grown Arabidopsis can take up and store palladium as nanoparticles. The processed plant biomass has catalytic activity comparable to that of commercially available catalysts, creating a product of higher value than extracted bulk metal. We demonstrate that the minimum level of palladium in Arabidopsis dried tissues for catalytic activity comparable to commercially available 3% palladium-on-carbon catalysts was achieved from dried plant biomass containing between 12 and 18 g·kg-1 Pd. To advance this technology, species suitable for in-the-field application: mustard, miscanthus, and 16 willow species and cultivars, were tested. These species were able to grow, and take up, palladium from both synthetic and mine-sourced tailings. Although levels of palladium accumulation in field-suitable species are below that required for commercially available 3% palladium-on-carbon catalysts, this study both sets the target, and is a step toward, the development of field-suitable species that concentrate catalytically active levels of palladium. Life cycle assessment on the phytomining approaches described here indicates that the use of plants to accumulate palladium for industrial applications has the potential to decrease the overall environmental impacts associated with extracting palladium using present-day mining processes.

Statistical thermodynamics unveils the dissolution mechanism of cellobiose.

In the study of the cellulose dissolution mechanism opinion is still divided. Here, the solution interaction components of the most prominent hypotheses for the driving force of cellulose dissolution were evaluated quantitatively. Combining a rigorous statistical thermodynamic theory and cellobiose solubility data in the presence of chloride salts, whose cations progress in the Hofmeister series (KCl, NaCl, LiCl and ZnCl2), we have shown that cellobiose solubilization is driven by the preferential accumulation of salts around the solutes which is stronger than cellobiose hydration. Yet contrary to the classical chaotropy hypothesis, increasing salt concentration leads to cellobiose dehydration in the presence of the strongest solubilizer ZnCl2. However, thanks to cellobiose dehydration, cellobiose-salt interaction still remains preferential despite weakening salt accumulation. Based on such insights, the previous hypotheses based on hydrophobicity and polymer charging have also been evaluated quantitatively. Thus, our present study successfully paved a way towards identifying the basic driving forces for cellulose solubilization in a quantitative manner for the first time. When combined with unit additivity methods this quantitative information could lead to a full understanding of cellulose solubility.

Rehabilitation and Psychosocial Determinants of Cochlear Implant Outcomes in Older Adults.

OBJECTIVE: The cochlear implant (CI) has been shown to be associated with better hearing, cognitive abilities, and functional independence. There is variability however in how much benefit each recipient derives from his or her CI. This study's primary objective is to determine the effects of individual and environmental characteristics on CI outcomes. DESIGN: Seventy-six adults who developed postlingual severe to profound hearing loss and received their first unilateral CI at 65 years and older were eligible for the study. Fifty-five patients were asked to participate and the 33 (60%) with complete data were classified as "group 1." The remaining patients were placed in "group 2." Primary outcomes included changes in quality of life and open-set speech perception scores. Independent variables included age, health status, trait emotional intelligence (EI), comfort with technology, and living arrangements. Survey outcomes and audiological measurements were collected prospectively at 12 months after surgery, whereas preoperative data were collected retrospectively. Comparisons between groups 1 and 2 were made. Wilcoxon signed rank test, Spearman correlations, Mann-Whitney tests, Chi-square tests, and linear regressions were performed only on group 1 data. RESULTS: Having a CI was associated with improved quality of life and speech perception. Familiarity with electronic tablets was associated with increased 12-month postoperative AzBio gains when adjusted for preoperative AzBio scores (adjusted p = 0.019), but only marginally significant when a family-wise error correction was applied (p = 0.057). Furthermore, patients who lived with other people scored at least 20 points higher on the AzBio sentences than those who lived alone (adjusted p = 0.046). Finally, consultation with an auditory rehabilitation therapist was associated with higher self-reported quality of life (p = 0.035). CONCLUSION: This study suggests that in a cohort of older patients cochlear implantation is associated with a meaningful increase in both quality of life and speech perception. Furthermore, it suggests the potential importance of adjunct support and services, including the tailoring of CI rehabilitation sessions depending on the patient's familiarity with technology and living situation. Investment in rehabilitation and other services is associated with improvements in quality of life and may mitigate clinical, individual and social risk factors for poor communication outcome.

Effect of rate of pyrolysis on the textural properties of naturally-templated porous carbons from alginic acid.

The effect of pyrolysis rate on the properties of alginic acid-derived carbonaceous materials, termed Starbon®, was investigated. Thermal Gravimetry-IR was used to prepare porous carbons up to 800 °C at several rates and highlighted increased CO2 production at higher pyrolysis rates. N2 porosimetry of the resultant carbons shows how pyrolysis rate affects both the mesopore structure and thus surface area and surface energy. Surface capacity of these carbons was analysed by methylene blue dye adsorption. In general, as the rate of pyrolysis increased, the mesopore content and adsorbent capacity decreased. It is considered here that the rapid production of volatiles at these higher rates causes structural collapse of the non-templated pore network. The work here demonstrates that pyrolysis rate is a key variable which needs to be controlled to maximise the textural properties of Starbon® required for adsorption applications.

Sustainable carbon materials.

Carbon-based structures are the most versatile materials used in the modern field of renewable energy (i.e., in both generation and storage) and environmental science (e.g., purification/remediation). However, there is a need and indeed a desire to develop increasingly more sustainable variants of classical carbon materials (e.g., activated carbons, carbon nanotubes, carbon aerogels, etc.), particularly when the whole life cycle is considered (i.e., from precursor "cradle" to "green" manufacturing and the product end-of-life "grave"). In this regard, and perhaps mimicking in some respects the natural carbon cycles/production, utilization of natural, abundant and more renewable precursors, coupled with simpler, lower energy synthetic processes which can contribute in part to the reduction in greenhouse gas emissions or the use of toxic elements, can be considered as crucial parameters in the development of sustainable materials manufacturing. Therefore, the synthesis and application of sustainable carbon materials are receiving increasing levels of interest, particularly as application benefits in the context of future energy/chemical industry are becoming recognized. This review will introduce to the reader the most recent and important progress regarding the production of sustainable carbon materials, whilst also highlighting their application in important environmental and energy related fields.

Recirculation: A New Concept to Drive Innovation in Sustainable Product Design for Bio-Based Products.

Bio-based products are made from renewable materials, offering a promising basis for the production of sustainable chemicals, materials, and more complex articles. However, biomass is not a limitless resource or one without environmental and social impacts. Therefore, while it is important to use biomass and grow a bio-based economy, displacing the unsustainable petroleum basis of energy and chemical production, any resource must be used effectively to reduce waste. Standards have been developed to support the bio-based product market in order to achieve this aim. However, the design of bio-based products has not received the same level of attention. Reported here are the first steps towards the development of a framework of understanding which connects product design to resource efficiency. Research and development scientists and engineers are encouraged to think beyond simple functionality and associate value to the potential of materials in their primary use and beyond.