Utilizing pigment-producing fungi to add commercial value to American beech (Fagus grandifolia).

American beech (Fagus grandifolia) is an abundant, underutilized tree in certain areas of North America, and methods to increase its market value are of considerable interest. This research utilized pigment-producing fungi to induce color in American beech to potentially establish its use as a decorative wood. Wood samples were inoculated with Trametes versicolor, Xylaria polymorpha, Inonotus hispidus, and Arthrographis cuboidea to induce fungal pigmentation. Black pigmentation (T. versicolor, X. polymorpha, I. hispidus) was sporadic, occurred primarily on the surfaces of the heartwood, but not internally. Pink pigmentation (A. cuboidea) occurred throughout all of the tested beech samples, but was difficult to see in the heartwood due to the darker color of the wood. To increase the visibility of the pink stain, beech blocks were pretreated with T. versicolor for 4 weeks before being inoculated with A. cuboidea. This method significantly increased the saturation of the pink stain on both beech heartwood and sapwood, creating coloration similar to that found on sugar maple. This value-adding process should be particularly effective for small-scale wood pigmentation, and should help establish a market for this currently underutilized wood species.

Method to recover and reuse chromated copper arsenate wood preservative from spent treated wood.

The volume of chromated copper arsenate (CCA) treated wood products coming out of service is expected to increase dramatically during the next decade. There is a need for an alternative waste management approach to landfilling. This paper investigates the variables affecting extraction of CCA components from wood particles and the potential to oxidize and reuse the recovered chemicals. Most of the CCA components could be extracted by 10% H2O2 at 50 degrees C in 6 h with an average extraction efficiency of 95% for Cr, 94% for Cu and 98% for As. The extract containing Cr(III), Cu(II) and As(V) could be oxidized in several stages by aqueous 2.5% w/w H2O2 in less than 2 h to a condition where it was compatible with CCA treating solutions and could be reused for treating new wood. When the recovered extract was mixed with fresh CCA solution in different ratios, the mixed CCA-C solutions had similar solution stability as freshly prepared CCA-C solution and treated wood had similar leaching properties as wood treated with fresh solution.

Morphological and molecular characterization of the two known North American Chlorociboria species and their anamorphs.

This study confirms that the two known Chlorociboria species from North America correspond to Chlorociboria aeruginascens and Chlorociboria aeruginosa that were originally described from Europe. The anamorphs of these two species are unambiguously identified for the first time: the genetic connection between C. aeruginascens is Dothiorina tulasnei, is here demonstrated for the first time by molecular data, and the anamorph of C. aeruginosa was previously undescribed. These two species are more closely related to different Southern Hemisphere taxa than they are to each other, indicating complex speciation processes in a global geographic context. Pure cultures isolated from the two species were grown on various media for examination of growth rate, sporulation, and xylindein production. The latter is responsible for green staining of wood and has applications in craftsmanship and perhaps also for drug development.

Stimulating growth and xylindein production of Chlorociboria aeruginascens in agar-based systems.

Four isolates of Chlorociboria aeruginascens were tested for possible stimulatory effects when grown on malt agar media containing wood additives. The addition of any of the four types of test wood (Acer saccharum, Populus tremuloides, spalted P. tremuloides, and Ailanthus altissima), stimulated colony growth and xylindein production in C. aeruginascens. Addition of any amount of wood produced more growth than no wood additions, while ground wood produced more growth than chopped wood. Of the wood types tested, A. saccharum wood stimulated all four isolates, while spalted Populus tremuloides stimulated three of the four isolates. High glucose and sucrose amounts may be partially responsible for the greater stimulatory affect of some woods over others. The development of this simple and reliable method for growth and pigment stimulation of C. aeruginascens in laboratory conditions will allow for further development of this fungus for decorative and commercial use.

The influence of moisture content variation on fungal pigment formation in spalted wood.

Eight fungal species known to produce wood pigmentation were tested for reaction to various moisture contents in two hardwood species. Fungal pigmentation by Trametes versicolor and Xylaria polymorpha was stimulated at low water concentrations in both Acer saccharum (sugar maple) and Fagus grandifolia (American beech), while Inonotus hispidus and Polyporus squamosus were stimulated above 22-28% and 34-38% moisture content in beech and in sugar maple respectively. Fomes fomentarius and Polyporus brumalis produced maximum pigmentation in beech at 26 - 41% and in sugar maple at 59 - 96% moisture content. The pink staining Scytalidium cuboideum pigmented both wood species at above 35% moisture content. This research indicates that controlling the moisture content values of wood substrates can stimulate the intensity of pigmentation of specific fungi when spalting wood for decorative and commercial purpose.

Extraction of hexavalent chromium from chromated copper arsenate treated wood under alkaline conditions.

Information on chromium (Cr) oxidation states is essential for the assessment of environmental and health risks associated with the overall life-cycle of chromated copper arsenate (CCA) treated wood products because of differences in toxicity between trivalent [Cr(III)] and hexavalent [Cr(VI)] chromium compounds. Hypothetical Cr(VI) fixation products were investigated in CCA type C treated sawdust of aspen and red pine during or following preservative fixation by extraction with Cr(VI)-specific extractants. Cr(VI) was found only in alkaline extracts of treated wood. A major source of Cr(VI) was method-induced oxidation of fixed Cr(III) during alkaline extraction, as confirmed by demonstrated oxidation of Cr(III) from CrCl3 treated wood. Oxidation of nontoxic and immobile Cr(III) to toxic and mobile Cr(VI) was facilitated by the presence of wood at pH > 8.5. Thermodynamic equilibrium between Cr(III) and Cr(VI) is affected by pH, temperature, rates of dissolution of CrIII) compounds, and oxygen availability. Results of this study recommend against alkaline extraction protocols for determination of Cr(VI) in treated wood. This Cr oxidation mechanism can act as a previously unrecognized route for generation of hazardous Cr(VI) if CCA treated wood is exposed to alkaline conditions during its production, use, or waste management.