RESUMO
The objective of the study was to obtain a new biodegradable graft polymer by performing two chemical processes: first, a transesterification reaction between carboxylic acid's salt and ethyl acrylate's ester, followed by polymerization of the vinyl group from the ethyl acrylate monomer via free radicals. The copolymer's FTIR shows an absence of ethyl bands, while the characteristic band of pyranose is maintained, which confirms the monomer's graft. TGA analysis shows that sodium alginate had three decomposition temperatures: 103 °C due to dehydration, 212 °C associated with the destruction of glycosidic bonds, and 426 °C due to conversion of alginate into Na2CO3. The copolymer presents four processes at different temperatures, i.e., evaporation of alcohol at 65 °C, decomposition of ungrafted alginate at 220 °C, copolymer decomposition at 298 °C, and degradation of fragments into carbonate at 423 °C. The evaluation of the action of fungal growth on the copolymer was higher than 50%, which means it is an excellent material to be biodegraded.
RESUMO
The development of sustainable extraction methods to obtain natural products constitutes a challenge for the food industry. The aim of this work was to compare yield, separation efficiency, chemical composition, and physicochemical properties of the mucilage extracted from fresh cladodes (FNM) and mucilage extracted from dehydrated cladodes (DNM) of O. ficus indica. Suspensions of fresh and dehydrated cladodes (4% w/w) were prepared for mucilage extraction by using a mechanical separation process. Subsequently, the separated mucilage was precipitated with ethyl alcohol (1:2 v/v) then, yield and separation efficiency were determined. The mucilage was characterized by measuring Z potential, viscosity, color, and texture attributes. Additionally, chemical proximate analysis, scanning electron microscopy, and thermogravimetric analysis (TGA) were conducted. No significant differences (p < 0.05) were detected in the yield and separation efficiencies between samples. Nevertheless, the dehydration process of cladodes prior to mucilage extraction increased protein, ashes, nitrogen free extract, and calcium content. The viscosity was higher in DNM than in FNM. The TGA revealed a different thermal behavior between samples. In addition, the DNM showed lower L (darkness/lightness), cohesiveness, adhesiveness, and springiness values than those of FNM. These results support that differences found between the chemical and physicochemical properties of DNM and those of FNM will determine the applications of the mucilage obtained from the O. ficus indica cladodes in the food, pharmaceutical, and cosmetic industries.
RESUMO
The tortilla is a foodstuff that has a short shelf-life, causing great losses to the industry. The objective of this work was to evaluate, for the first time, the physicochemical properties and resistant starch (RS) content of flours. These were obtained from nixtamalized corn tortillas made with traditional and industrial (commercial) methods, stored at 4 °C for 7, 15, and 30 days. The flours were characterized by measuring particle size distribution, color, water absorption index (WAI), water solubility index (WSI), viscosity, calcium, and RS content. Additionally, chemical proximate analysis, scanning electron microscopy (SEM), and thermal analysis were conducted. Storage at 4 °C increased the friability of tortillas and shifted the particle size distribution toward a greater content of coarse particles in corn tortilla flours. The commercial corn tortilla flours showed higher WAI and WSI values than the traditional corn tortilla flours. On the other hand, the traditional corn tortilla flours exhibited higher RS content values than commercial corn tortilla flours as well as peak viscosity. X-ray diffractograms revealed the presence of amylose-lipid complexes (RS5) in experimental samples. The thermograms evidenced three endotherms corresponding to corn starch gelatinization and melting of type I and type II amylose-lipid complexes.