Biogenic Solution Map Based on the Definition of the Metabolic Correlation Distance between 4-Dimensional Fingerprints.

Accurate discrimination and classification of unknown species are the basis to predict its characteristics or applications to make correct decisions. However, for biogenic solutions that are ubiquitous in nature and our daily lives, direct determination of their similarities and disparities by their molecular compositions remains a scientific challenge. Here, we explore a standard and visualizable ontology, termed "biogenic solution map", that organizes multifarious classes of biogenic solutions into a map of hierarchical structures. To build the map, a novel 4-dimensional (4D) fingerprinting method based on data-independent acquisition data sets of untargeted metabolomics is developed, enabling accurate characterization of complex biogenic solutions. A generic parameter of metabolic correlation distance, calculated based on averaged similarities between 4D fingerprints of sample groups, is able to define "species", "genus", and "family" of each solution in the map. With the help of the "biogenic solution map", species of unknown biogenic solutions can be explicitly defined. Simultaneously, intrinsic correlations and subtle variations among biogenic solutions in the map are accurately illustrated. Moreover, it is worth mentioning that samples of the same analyte but prepared by alternative protocols may have significantly different metabolic compositions and could be classified into different "genera".

CuO Promotes the Formation of Halogenated Disinfection Byproducts during Chlorination via an Enhanced Oxidation Pathway.

Previous studies showed that cupric oxide (CuO) can enhance the formation of trihalomethanes (THMs), haloacetic acids, and bromate during chlorination of bromide-containing waters. In this study, the impact of CuO on the formation kinetics and mechanisms of halogenated disinfection byproducts (DBPs) during chlorination was investigated. CuO does not enhance the formation of DBPs (i.e., 1,1,1-trichloropropanone, chloroform, and trichloroacetaldehyde (TCAL) /dichloroacetonitrile) during chlorination of acetone, 3-oxopentanedioic acid (3-OPA), and aspartic acid, respectively. This indicates that the halogen substitution pathway cannot be enhanced by CuO. Instead, CuO (0.1 g L-1) accelerates the second-order rate constants for reactions of chlorine (HOCl) with TCAL, citric acid, and oxalic acid at pH 8.0 and 21 °C from <0.1 to 29.4, 7.2, and 15.8 M-1 s-1, respectively. Oxidation pathway predominates based on the quantification of oxidation products (e.g., a trichloroacetic acid yield of ∼100% from TCAL) and kinetic modeling. CuO can enhance the formation of DBPs (e.g., THMs, haloacetaldehydes, and haloacetonitriles) during chlorination of model compounds and dissolved organic matter, of which both halogen substitution and oxidation pathways are required. Reaction rate constants of rate-limiting steps (e.g., citric acid to 3-OPA, aromatic ring cleavage) could be enhanced by CuO via an oxidation pathway since CuO-HOCl complex is more oxidative toward a range of substrates than HOCl in water. These findings provide novel insights into the DBP formation pathway in copper-containing distribution systems.

Modification Mechanism of Polyamide Reverse Osmosis Membrane by Persulfate: Roles of Hydroxyl and Sulfate Radicals.

Oxidative modification is a facile method to improve the desalination performance of thin-film composite membranes. In this study, we comparatively investigated the modification mechanisms induced by sulfate radical (SO4• -) and hydroxyl radical (HO•) for polyamide reverse osmosis (RO) membrane. The SO4• -- and HO•-based membrane modifications were manipulated by simply adjusting the pH of the thermal-activated persulfate solution. Although both of them improved the water permeability of the RO membrane under certain conditions, the SO4• --modified membrane notably prevailed over the HO•-modified one due to higher permeability, more consistent salt rejection rates over wide pH and salinity ranges, and better stability when exposed to high doses of chlorine. The differences of the membranes modified by the two radical species probably can be related to their distinct surface properties in terms of morphology, hydrophilicity, surface charge, and chemical composition. Further identification of the transformation products of a model polyamide monomer using high-resolution mass spectrometry demonstrated that SO4• - initiated polymerization reactions and produced hydroquinone/benzoquinone and polyaromatic structures; whereas the amide group of the monomer was degraded by HO•, generating hydroxyl, carboxyl, and nitro groups. The results will enlighten effective ways for practical modification of polyamide RO membranes to improve desalination performances and the development of sustainable oxidation-combined membrane processes.

Ozone combined with ceramic membranes for water treatment: Impact on HO radical formation and mitigation of bromate.

The beneficial effect of combining ozone with ceramic membrane filtration (CMF) to enhance membrane flux performances during water treatment (e.g., wastewater and drinking water) could be related to the formation of hydroxyl (HO) radicals from the interaction of ozone with ceramic membrane. To explore this effect, para-chlorobenzoic acid was used to probe HO radical activity during a combined ozone/CMF process using a 0.1 µm pore size membrane supplied by Metawater, Japan. Tests were then extended to explore the impact on bromate formation downstream CMF, a well-known undesirable by-product from ozone use in water treatment. Ozone reduction by the membrane and its module appeared to be more associated with physical degassing, but a noticeable formation of HO radicals was observed during the interaction of ozone with the ceramic membrane. CMF treatment of ozonated potable water containing bromide showed a reduced bromate formation of 50% when the water was recirculated to the filtration module containing the ceramic membrane, compared to the experiment performed with an empty module. Single pass experiments showed bromate mitigation of around 10%. The mitigation of bromate formation was attributed to reduced overall ozone exposure by deagassing effect, but also potentially from suppression of the oxidation of Br- and HOBr/BrO- to BrO3- due to the catalytic degradation of ozone via a HO radical pathway.

Excited Triplet State Interactions of Fluoroquinolone Norfloxacin with Natural Organic Matter: A Laser Spectroscopy Study.

In sunlit waters, the fate of fluoroquinolone antibiotics is significantly impacted by photodegradation. The mechanism of how natural organic matter (NOM) participates in the reaction has been frequently studied but still remains unclear. In this work, the interactions between the excited triplet state of the fluoroquinolone antibiotic norfloxacin (3NOR*) and a variety of NOM extracts were investigated using time-resolved laser spectroscopy. The observed transient absorption spectrum of 3NOR* showed a maximum at ca. 600 nm, and global fitting gave a lifetime of 1.0 µs for 3NOR* in phosphate buffer at pH = 7.5. Quenching of 3NOR* by Suwannee River hydrophobic acids (HPO), Beaufort River HPO, and Gartempe River HPO yielded rate constants of 1.8, 2.6, and 4.5 (×107 molC-1 s-1) respectively, whereas HPO from South Platte River unexpectedly increased the lifetime of 3NOR* with an as yet unknown mechanism. Concurrent photodegradation experiments of NOR (5 µM) in the presence of these NOM were also performed using a sunlight simulator. In general, the effects of NOM on the photodegradation rate of NOR were in agreement with observations from transient absorption studies. We suggest that adsorption of NOR to NOM is one of the major factors contributing to the observed quenching. These results yield a new insight into the likely role of NOM in sunlight-induced degradation of micropollutants.

In Situ Formation of Free Chlorine During ClO2 Treatment: Implications on the Formation of Disinfection Byproducts.

Chlorine dioxide (ClO2) is commonly used as an alternative disinfectant to chlorine in drinking water treatment because it produces limited concentrations of halogenated organic disinfection byproducts. During drinking water treatment, the primary ClO2 byproducts are the chlorite (50-70%) and the chlorate ions (0-30%). However, a significant portion of the ClO2 remains unaccounted for. This study demonstrates that when ClO2 was reacting with phenol, one mole of free available chlorine (FAC) was produced per two moles of consumed ClO2. The in situ formed FAC completed the mass balance on Cl for inorganic ClO2 byproducts (FAC + ClO2- + ClO3-). When reacting with organic matter extracts at near neutral conditions (pH 6.5-8.1), ClO2 also yielded a significant amount of FAC (up to 25%). Up to 27% of this in situ formed FAC was incorporated in organic matter forming adsorbable organic chlorine, which accounted for up to 7% of the initial ClO2 dose. Only low concentrations of regulated trihalomethanes were produced because of an efficient mitigation of their precursors by ClO2 oxidation. Conversely, dichloroacetonitrile formation from ClO2-induced generation of FAC was higher than from addition of FAC in absence of ClO2. Overall, these findings provide important information on the formation of FAC and disinfection byproducts during drinking water treatment with ClO2.

Method Development for Quantification of Bromochloramine Using Membrane Introduction Mass Spectrometry.

During chloramination of bromide-containing waters, the main brominated amine formed is bromochloramine (NHBrCl). To date, there is no analytical method, free of interference, allowing its accurate quantification. The major reason is that it is not possible to produce a pure NHBrCl solution. In this study, we report a method allowing the accurate quantification of NHBrCl with membrane introduction mass spectrometry (MIMS). First, the molar absorption coefficient for NHBrCl was determined by quantifying NHBrCl as 2,4,6-tribromophenol by HPLC-UV and comparing the results with the direct UV response at 320 nm. A molar absorption coefficient of 304 M-1cm-1 was obtained. The results obtained by direct UV measurements were compared to the MIMS signal recorded at m/ z 131 corresponding to the mass of the molecular ion and used to establish a calibration curve. A limit of detection of 2.9 µM (378 µg/L) was determined. MIMS is the only method enabling the unambiguous quantification of NHBrCl, as it is based on m/ z 131, while with other analytical techniques, other halamines can interfere, i.e., overlapping peaks with direct UV measurements and reaction of several halamines with colorimetric reagents or phenols. While the detection limit is not quite low enough to measure NHBrCl in actual drinking water, this analytical method will benefit the scientific community by allowing further mechanistic studies on the contribution of NHBrCl to the formation of toxic disinfection by-products.

Formation of Haloacetonitriles, Haloacetamides, and Nitrogenous Heterocyclic Byproducts by Chloramination of Phenolic Compounds.

The potential formation of nitrogenous disinfection byproducts (N-DBPs) was investigated from the chloramination of nitrogenous and non-nitrogenous aromatic compounds. All molecules led to the formation of known N-DBPs (e.g., dichloroacetonitrile, dichloroacetamide) with various production yields. Resorcinol, a major precursor of chloroform, also formed di/trichloroacetonitrile, di/trichloroacetamide, and haloacetic acids, indicating that it is a precursor of both N-DBPs and carbonaceous DBPs (C-DBPs) upon chloramination. More detailed experiments were conducted on resorcinol to understand N-DBPs formation mechanisms and to identify reaction intermediates. Based on the accurate mass from high resolution Quadrupole Time-of-Flight GC-MS (GC-QTOF) and fragmentation patterns from electronic impact and positive chemical ionization modes, several products were tentatively identified as nitrogenous heterocyclic compounds (e.g., 3-chloro-5-hydroxy-1H-pyrrole-2-one with dichloromethyl group, 3-chloro-2,5-pyrroledione). These products were structurally similar to the heterocyclic compounds formed during chlorination, such as the highly mutagenic MX (3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone) or halogenated pyrroles. To our knowledge, this is the first time that the formation of halogenated nitrogenous heterocyclic compounds is reported from chloramination process. The formation of these nitrogenous byproducts during chloramination might be of concern considering their potential toxicity.

Interactions of phosphate solubilising microorganisms with natural rare-earth phosphate minerals: a study utilizing Western Australian monazite.

Many microbial species are capable of solubilising insoluble forms of phosphate and are used in agriculture to improve plant growth. In this study, we apply the use of known phosphate solubilising microbes (PSM) to the release of rare-earth elements (REE) from the rare-earth phosphate mineral, monazite. Two sources of monazite were used, a weathered monazite and mineral sand monazite, both from Western Australia. When incubated with PSM, the REE were preferentially released into the leachate. Penicillum sp. released a total concentration of 12.32 mg L-1 rare-earth elements (Ce, La, Nd, and Pr) from the weathered monazite after 192 h with little release of thorium and iron into solution. However, cultivation on the mineral sands monazite resulted in the preferential release of Fe and Th. Analysis of the leachate detected the production of numerous low-molecular weight organic acids. Gluconic acid was produced by all microorganisms; however, other organic acids produced differed between microbes and the monazite source provided. Abiotic leaching with equivalent combinations of organic acids resulted in the lower release of REE implying that other microbial processes are playing a role in solubilisation of the monazite ore. This study demonstrates that microbial solubilisation of monazite is promising; however, the extent of the reaction is highly dependent on the monazite matrix structure and elemental composition.

Chloramination of wastewater effluent: Toxicity and formation of disinfection byproducts.

The reclamation and disinfection of waters impacted by human activities (e.g., wastewater effluent discharges) are of growing interest for various applications but has been associated with the formation of toxic nitrogenous disinfection byproducts (N-DBPs). Monochloramine used as an alternative disinfectant to chlorine can be an additional source of nitrogen in the formation of N-DBPs. Individual toxicity assays have been performed on many DBPs, but few studies have been conducted with complex mixtures such as wastewater effluents. In this work, we compared the cytotoxicity and genotoxicity of wastewater effluent organic matter (EfOM) before and after chloramination. The toxicity of chloraminated EfOM was significantly higher than the toxicity of raw EfOM, and the more hydrophobic fraction (HPO) isolated on XAD-8 resin was more toxic than the fraction isolated on XAD-4 resin. More DBPs were also isolated on the XAD-8 resin. N-DBPs (i.e., haloacetonitriles or haloacetamides) were responsible for the majority of the cytotoxicity estimated from DBP concentrations measured in the XAD-8 and XAD-4 fractions (99.4% and 78.5%, respectively). Measured DBPs accounted for minor proportions of total brominated and chlorinated products, which means that many unknown halogenated compounds were formed and can be responsible for a significant part of the toxicity. Other non-halogenated byproducts (e.g., nitrosamines) may contribute to the toxicity of chloraminated effluents as well.

Formation of Bromate and Halogenated Disinfection Byproducts during Chlorination of Bromide-Containing Waters in the Presence of Dissolved Organic Matter and CuO.

Previous studies showed that significant bromate (BrO3(-)) can be formed via the CuO-catalyzed disproportionation of hypobromous acid (HOBr) pathway. In this study, the influence of CuO on the formation of BrO3(-) and halogenated disinfection byproducts (DBPs) (e.g., trihalomethanes, THMs and haloacetic acids, HAAs) during chlorination of six dissolved organic matter (DOM) isolates was investigated. Only in the presence of slow reacting DOM (from treated Colorado River water, i.e., CRW-BF-HPO), significant BrO3(-) formation is observed, which competes with bromination of DOM (i.e., THM and HAA formation). Reactions between HOBr and 12 model compounds in the presence of CuO indicates that CuO-catalyzed HOBr disproportionation is completely inhibited by fast reacting phenols, while it predominates in the presence of practically unreactive compounds (acetone, butanol, propionic, and butyric acids). In the presence of slow reacting di- and tricarboxylic acids (oxalic, malonic, succinic, and citric acids), BrO3(-) formation varies, depending on its competition with bromoform and dibromoacetic acid formation (i.e., bromination pathway). The latter pathway can be enhanced by CuO due to the activation of HOBr. Therefore, increasing CuO dose (0-0.2 g L(-1)) in a reaction system containing chlorine, bromide, and CRW-BF-HPO enhances the formation of BrO3(-), total THMs and HAAs. Factors including pH and initial reactant concentrations influence the DBP formation. These novel findings have implications for elevated DBP formation during transportation of chlorinated waters in copper-containing distribution systems.

Influence of Surface Properties of Filtration-Layer Metal Oxide on Ceramic Membrane Fouling during Ultrafiltration of Oil/Water Emulsion.

In this work, ceramic ultrafiltration membranes deposited with different metal oxides (i.e., TiO2, Fe2O3, MnO2, CuO, and CeO2) of around 10 nm in thickness and similar roughness were tested for O/W emulsion treatment. A distinct membrane fouling tendency was observed, which closely correlated to the properties of the filtration-layer metal oxides (i.e., surface hydroxyl groups, hydrophilicity, surface charge, and adhesion energy for oil droplets). Consistent with the distinct bond strength of the surface hydroxyl groups, hydrophilicity of these common metal oxides is quite different. The differences in hydrophilicity consequently lead to different adhesion of these metal oxides toward oil droplets, consistent with the irreversible membrane fouling tendency. In addition, the surface charge of the metal oxide opposite to that of emulsion can help to alleviate irreversible membrane fouling in ultrafiltration. Highly hydrophilic Fe2O3 with the lowest fouling tendency could be a potential filtration-layer material for the fabrication/modification of ceramic membranes for O/W emulsion treatment. To the best of our knowledge, this is the first study clearly showing the correlations between surface properties of filtration-layer metal oxides and ceramic membrane fouling tendency by O/W emulsion.

Citrate-Coated Silver Nanoparticles Interactions with Effluent Organic Matter: Influence of Capping Agent and Solution Conditions.

Fate and transport studies of silver nanoparticles (AgNPs) discharged from urban wastewaters containing effluent organic matter (EfOM) into natural waters represent a key knowledge gap. In this study, EfOM interfacial interactions with AgNPs, and their aggregation kinetics were investigated by atomic force microscopy (AFM) and time-resolved dynamic light scattering (TR-DLS), respectively. Two well-characterized EfOM isolates, i.e., wastewater humic (WW humic) and wastewater colloids (WW colloids, a complex mixture of polysaccharides-proteins-lipids), and a River humic isolate of different characteristics were selected. Citrate-coated AgNPs were selected as representative capped-AgNPs. Citrate-coated AgNPs showed a considerable stability in Na(+) solutions. However, Ca(2+) ions induced aggregation by cation bridging between carboxyl groups on citrate. Although the presence of River humic increased the stability of citrate-coated AgNPs in Na(+) solutions due to electrosteric effects, they aggregated in WW humic-containing solutions, indicating the importance of humics characteristics during interactions. Ca(2+) ions increased citrate-coated AgNPs aggregation rates in both humic solutions, suggesting cation bridging between carboxyl groups on their structures as a dominant interacting mechanism. Aggregation of citrate-coated AgNPs in WW colloids solutions was significantly faster than those in both humic solutions. Control experiments in urea solution indicated hydrogen bonding as the main interacting mechanism. During AFM experiments, citrate-coated AgNPs showed higher adhesion to WW humic than to River humic, evidencing a consistency between TR-DLS and AFM results. Ca(2+) ions increased citrate-coated AgNPs adhesion to both humic isolates. Interestingly, strong WW colloids interactions with citrate caused AFM probe contamination (nanoparticles adsorption) even at low Na(+) concentrations, indicating the impact of hydrogen bonding on adhesion. These results suggest the importance of solution conditions and capping agents on the stability of AgNPs in solution. However, the characteristics of organics would play a crucial role in the fate and transport of these nano contaminants in urban wastewaters and natural water systems.

Changes in physicochemical and transport properties of a reverse osmosis membrane exposed to chloraminated seawater.

This study contributed to improving our understanding of how disinfectants, applied to control biofouling of reverse osmosis (RO) membranes, result in membrane performance degradation. We investigated changes in physicochemical properties and permeation performance of a RO membrane with fully aromatic polyamide (PA) active layer. Membrane samples were exposed to varying concentrations of monochloramine, bromide, and iodide in both synthetic and natural seawater. Elemental analysis of the membrane active layer by Rutherford backscattering spectrometry (RBS) revealed the incorporation of bromine and iodine into the polyamide. The kinetics of polyamide bromination were first order with respect to the concentration of the secondary oxidizing agent Br2 for the conditions investigated. Halogenated membranes were characterized after treatment with a reducing agent and heavy ion probes to reveal the occurrence of irreversible ring halogenation and an increase in carboxylic groups, the latter produced as a result of amide bond cleavage. Finally, permeation experiments revealed increases in both water permeability and salt passage as a result of oxidative damage.

Chlorination of iodide-containing waters in the presence of CuO: formation of periodate.

It has been shown previously that the disproportionation of halogen-containing oxidants (e.g., HOCl, HOBr, and ClO2) is enhanced by a CuO-catalyzed process. In this study, the transformation of iodine during chlorination in the presence of CuO was investigated. There is no significant enhancement of the disproportionation of hypoiodous acid (HOI) in the presence of CuO. The formation rate of iodate (IO3(-)) in the CuO-HOCl-I(-) system significantly increased when compared to homogeneous solutions, which was ascribed to the activation of HOCl by CuO enhancing its reactivity toward HOI. In this reaction system, iodate formation rates increase with increasing CuO (0-0.5 g L(-1)) and bromide (0-2 µM) doses and with decreasing pH (9.6-6.6). Iodate does not adsorb to the CuO surfaces used in this study. Nevertheless, iodate concentrations decreased after a maximum was reached in the CuO-HOCl-I(-)(-Br(-)) systems. Similarly, the iodate concentrations decrease as a function of time in the CuO-HOCl-IO3(-) or CuO-HOBr-IO3(-) system, and the rates increase with decreasing pH (9.6-6.6) due to the enhanced reactivity of HOCl or HOBr in the presence of CuO. It could be demonstrated that iodate is oxidized to periodate by a CuO-activated hypohalous acid, which is adsorbed on the CuO surface. No periodate could be measured in filtered solutions because it was mainly adsorbed to CuO. The adsorbed periodate was identified by scanning electron microscopy plus energy dispersive spectroscopy and X-ray photoelectron spectroscopy.

Formation of brominated disinfection byproducts from natural organic matter isolates and model compounds in a sulfate radical-based oxidation process.

A sulfate radical-based advanced oxidation process (SR-AOP) has received increasing application interest for the removal of water/wastewater contaminants. However, limited knowledge is available on its side effects. This study investigated the side effects in terms of the production of total organic bromine (TOBr) and brominated disinfection byproducts (Br-DBPs) in the presence of bromide ion and organic matter in water. Sulfate radical was generated by heterogeneous catalytic activation of peroxymonosulfate. Isolated natural organic matter (NOM) fractions as well as low molecular weight (LMW) compounds were used as model organic matter. Considerable amounts of TOBr were produced by SR-AOP, where bromoform (TBM) and dibromoacetic acid (DBAA) were identified as dominant Br-DBPs. In general, SR-AOP favored the formation of DBAA, which is quite distinct from bromination with HOBr/OBr(-) (more TBM production). SR-AOP experimental results indicate that bromine incorporation is distributed among both hydrophobic and hydrophilic NOM fractions. Studies on model precursors reveal that LMW acids are reactive TBM precursors (citric acid > succinic acid > pyruvic acid > maleic acid). High DBAA formation from citric acid, aspartic acid, and asparagine was observed; meanwhile aspartic acid and asparagine were the major precursors of dibromoacetonitrile and dibromoacetamide, respectively.

Efficient peroxydisulfate activation process not relying on sulfate radical generation for water pollutant degradation.

Peroxydisulfate (PDS) is an appealing oxidant for contaminated groundwater and toxic industrial wastewaters. Activation of PDS is necessary for application because of its low reactivity. Present activation processes always generate sulfate radicals as actual oxidants which unselectively oxidize organics and halide anions reducing oxidation capacity of PDS and producing toxic halogenated products. Here we report that copper oxide (CuO) can efficiently activate PDS under mild conditions without producing sulfate radicals. The PDS/CuO coupled process is most efficient at neutral pH for decomposing a model compound, 2,4-dichlorophenol (2,4-DCP). In a continuous-flow reaction with an empty-bed contact time of 0.55 min, over 90% of 2,4-DCP (initially 20 µM) and 90% of adsorbable organic chlorine (AOCl) can be removed at the PDS/2,4-DCP molar ratio of 1 and 4, respectively. Based on kinetic study and surface characterization, PDS is proposed to be first activated by CuO through outer-sphere interaction, the rate-limiting step, followed by a rapid reaction with 2,4-DCP present in the solution. In the presence of ubiquitous chloride ions in groundwater/industrial wastewater, the PDS/CuO oxidation shows significant advantages over sulfate radical oxidation by achieving much higher 2,4-DCP degradation capacity and avoiding the formation of highly chlorinated degradation products. This work provides a new way of PDS activation for contaminant removal.

Insights into adsorbable organic halogen analysis: Two overlooked factors impacting water quality assessment.

Adsorbable organic halogen (AOX) represents the total amount of halogenated organics that can be adsorbed on activated carbon (AC) from samples. Measuring AOX is crucial for assessing water quality, and any erroneous estimation of AOX risks misleading decision-makers. This study demonstrated two overlooked factors that may introduce biases to AOX measurement. The first one relates to impurities in the gas transfer tubes of AOX combustion system and in the pressurized gas of AOX separation system, which resulted in significant fluctuations and high blank values (8.5-118.0 µg-Cl/L). The solutions of above issues are to warming up the combustor for several runs and replacing the pressurized air with argon gas in the separator, which could drop the blank AOX values to 9.1-10.0 µg-Cl/L. The second one involves coexisting chloride ion (Cl-) during AOX analysis, which interfered with AOX measurements (T. test, p < 0.05) even at low concentration levels (e.g., 10 mg/L Cl- in samples with 100 µg-Cl/L p-chlorophenol). Results show that AC captured 0.02-0.11 % of Cl-, resulting in 17.7-24.5 µg-Cl/L AOX responses in control samples containing 15-130 mg/L Cl- only. Furthermore, a significant mass imbalance of Cl- (3.58-8.39 %) during analysis process suggests a potential impact of residual Cl- on subsequent samples. By comparing synthetic and actual waters, samples with low dissolved organic carbon (DOC) were more susceptible to interference from Cl- on AOX measurement than those with high DOC. These findings underscore the pressing need to optimize existing AOX methods or develop alternative analytical methods to ensure accurate water quality assessment.

Effect of electrolyte composition on electrocatalytic transformation of perfluorooctanoic acid (PFOA) in high pH medium.

Recent regulatory actions aim to limit per- and polyfluoroalkyl substances (PFAS) concentrations in drinking water and wastewaters. Regenerable anion exchange resin (AER) is an effective separation process to remove PFAS from water but will require PFAS post-treatment of the regeneration wastestream. Electrocatalytic (EC) processes using chemically boron-doped diamond electrodes, stable in a wide range of chemical compositions show potential to defluorinate PFOA in drinking water and wastewater treatments. Chemical composition and concentration of mineral salts in supporting electrolytes affect AER regeneration efficiency, and play a crucial role in the EC processes. Their impact on PFAS degradation remains understudied. This study investigates the impact of 17 brine electrolytes with different compositions on perfluorooctanoic acid (PFOA) degradation in an alkaline medium and explores the correlation between the rate of PFOA degradation and the solution's conductivity. Results show that higher electrolyte concentrations and conductivity lead to faster PFOA degradation rates. The presence of chloride anions have negligible impact on the degradation rate. However, the presence of nitrate salts reduce PFOA degradation efficiency. Additionally, the use of mixed electrolytes may be a promising approach for reducing the cost of EC operations. PFOA degradation was not influenced by the pH of the bulk solution.

Impact of dissolved organic matter characteristics and inorganic species on the stability and removal by coagulation of nanoplastics in aqueous media.

The aggregation of rough, raspberry-type polystyrene nanoparticles (PS-NPs) was investigated in the presence of six hydrophobic and hydrophilic dissolved organic matter (DOM) isolates and biopolymers (effluent OM) in NaCl and CaCl2 solutions using time-resolved dynamic light scattering. Results showed that the stability of PS-NPs mainly depends on OM characteristics and ionic composition. Due to cation bridging, the aggregation rate of PS-NPs in Ca2+-containing solutions was significantly higher than at similar Na+-ionic strength. Biopolymers rich in protein and carbohydrate moieties showed higher affinity to the surface of PS-NPs than the other DOM isolates in the absence of both Ca2+ and Na+. Overall, the stability of PS-NPs followed the order of biopolymers > hydrophobic isolates > hydrophilic isolates in the presence of Na+ and biopolymers > hydrophilic isolates > hydrophobic isolates in Ca2+-containing solutions. In the presence of high MW structures (biopolymers), PS-NPs aggregation in both NaCl and CaCl2 solutions was attributed to steric repulsive forces. The impact of hydrophilic and hydrophobic isolates on PS-NPs aggregation highly relied on the ionic composition. Coagulation was an effective pretreatment for PS-NPs removal. Using inductively coupled plasma-mass spectrometry, higher removals were recorded with Al2(SO4)3 in the absence of DOM, while PACl more efficiently coagulated PS-NPs in the presence of DOM isolates.