[Numerical study of the effect of geometrical parameters of straight impellers on the flow and hemolysis performance of centrifugal blood pumps].

Red blood cells are destroyed when the shear stress in the blood pump exceeds a threshold, which in turn triggers hemolysis in the patient. The impeller design of centrifugal blood pumps significantly influences the hydraulic characteristics and hemolytic properties of these devices. Based on this premise, the present study employs a multiphase flow approach to numerically simulate centrifugal blood pumps, investigating the performance of pumps with varying numbers of blades and blade deflection angles. This analysis encompassed the examination of flow field characteristics, hydraulic performance, and hemolytic potential. Numerical results indicated that the concentration of red blood cells and elevated shear stresses primarily occurred at the impeller and volute tongue, which drastically increased the risk of hemolysis in these areas. It was found that increasing the number of blades within a certain range enhanced the hydraulic performance of the pump but also raised the potential for hemolysis. Moreover, augmenting the blade deflection angle could improve the hemolytic performance, particularly in pumps with a higher number of blades. The findings from this study can provide valuable insights for the structural improvement and performance enhancement of centrifugal blood pumps.

Graphite carbon nitride/boron-doped graphene hybrid for efficient hydrogen generation reaction.

Metal-free carbon materials, with tuned surface chemical and electronic properties, hold great potential for the hydrogen evolution reaction (HER). We designed and synthesized a CN/BG hybrid electrocatalytic system with a porous and active graphite carbon nitride (CN) layer on boron-doped graphene (BG). A porous CN layer on graphene could provide exposed defects and edges that act as active sites for proton adsorption and reduction. The composition, structure, surface electronics, and chemical properties of this CN/BG hybrid system were tuned to obtain excellent HER activity and stability. Detailed surface chemical, morphological, and structural analyses demonstrated the synergetic effect arising from the electronic interaction between CN and BG, which contributed to the enhanced electrocatalytic performances.

Life cycle assessment of secondary use and physical recycling of lithium-ion batteries retired from electric vehicles in China.

With the rapid development of the global new energy vehicle industry, how to minimize the environmental impact of the recovery has become a common concern and urgent concern. China is a major production and consumption market for electric vehicles, there are no specific and extensive resource and environmental assessment system for batteries. In this paper, the retired Electric vehicles lithium-ion batteries (LIBs) was the research object, and a specific analysis of the recycling treatment and gradual use stages of power batteries were based on life cycle assessment. Different battery assessment scenarios were established according to the development of battery recycling in China. The results showed that the secondary use has the optimal performance compared to the full-component physical, pyrometallurgical and hydrometallurgy recycling. The results showed that direct recycling has a GWP of 0.037 kg-CO2 eq·kg LIB-1, which is lower than others. Secondary use of LIB accounts for the most emission reductions with Global warming (GWP) as 12.134 kg-CO2 eq·kg LIB-1. The secondary use has the greatest impact on the assessment results, especially in dynamic scenarios. Through a comprehensive comparison of different recycling technologies, the secondary use, increasing the recycling rate, reducing resource, energy consumption and pollution emissions.

A novel mass-heat exchange network analogy, regression, and synthesis method for mass exchanger networks.

Synthesis of mass exchanger network (MEN) is significant to save the material and reduce the pollution for process industries. Considering its small magnitude and concentration constraints, the optimized configuration of MEN can easily violate the concentration constraints, leading to a reduction in the structural diversity during the optimization process compared to that of a heat exchanger network (HEN) of the same size. Moreover, the constraint on the mass transfer driving force based on the equilibrium composition may also have major effects on the optimization process. To address these issues, this study presents a process-equipment-system analogy between the MEN and the HEN, proposing a novel mass-heat exchange network analogy, regression, and synthesis method. First, the generalized HEN was established by using an analogy considering the MEN based on either the original composition or the equilibrium composition. In this regard, a coordination coefficient was introduced to correct the deviation of the analogy relationship between the heat transfer and the mass transfer processes. Then, the generalized HEN was optimized by employing the random walk algorithm with compulsive evolution (RWCE). A regression method was proposed to regress the optimized HEN solution to the MEN expression, allowing the continuous optimization by using the RWCE with finer parameters. The final optimal solution obtained was found to be lower than those reported in the literature with enhanced structural diversity, demonstrating the effectiveness of the presented method and providing new ideas for further synchronous optimization of combined heat and mass exchanger networks.

Effective immobilization of nanoscale Pd on a carbon hybrid for enhanced electrocatalytic performances: stabilization mechanism investigations.

The grand challenge inhibiting the use of electrocatalysts is the degradation of active species which results in poor durability and long-term performances. Studying the origin of active metal particle stabilization mechanisms by using supports and the immobilization-induced changes of active particles is of significant importance. This study describes the preparation of Pd nanoparticles supported by carbon hybrid NPG-CN, revealing that the mass and specific activities (1987 A g-1 Pd and 28.7 A m-2) of this catalyst for formic acid oxidation significantly exceed those of commercial Pd/C, and excellent stability and enhanced CO-poisoning tolerance properties are obtained. The origin of this behavior is probed by surface analytical techniques and identical-location transmission electron microscopy (IL-TEM), and the enhanced activity of Pd/NPG-CN is ascribed to the electronic effect of the substrate, the high content of surface metallic Pd0, and the reduced extent of active Pd leaching and physical ripening during the FOA process compared with commercial Pd/C. In addition, theoretical calculations demonstrate that NPG-CN can efficiently trap Pd atoms, which accumulate and form Pd clusters at trapping (nucleation) sites.