Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 16 de 16
Filtrar
1.
Nano Lett ; 19(8): 5205-5215, 2019 Aug 14.
Artigo em Inglês | MEDLINE | ID: mdl-31287707

RESUMO

We have studied the ambient air oxidation of chemical vapor deposition (CVD) grown monolayers of the semiconducting transition metal dichalcogenide (S-TMD) WS2 using optical microscopy, laser scanning confocal microscopy (LSCM), photoluminescence (PL) spectroscopy, and atomic force microscopy (AFM). Monolayer WS2 exposed to ambient conditions in the presence of light (typical laboratory ambient light for weeks or typical PL spectroscopy map) exhibits damage due to oxidation which can be detected with the LSCM and AFM, though may not be evident in conventional optical microscopy due to poorer contrast and resolution. Additionally, this oxidation was not random and was correlated with "high-symmetry" high intensity edges and red-shifted areas in the PL spectroscopy map, areas thought to contain a higher concentration of sulfur vacancies. In contrast, samples kept in ambient and darkness showed no signs of oxidation for up to 10 months. Low-irradiance/fluence experiments showed that samples subjected to excitation energies at or above the trion excitation energy (532 nm/2.33 eV and 660 nm/1.88 eV) oxidized in as little as 7 days, even for irradiances and fluences 8 and 4 orders of magnitude lower (respectively) than previously reported. No significant oxidation was observed for 760 nm/1.63 eV light exposure, which lies below the trion excitation energy in WS2. The strong wavelength dependence and apparent lack of irradiance dependence suggests that ambient oxidation of WS2 is initiated by photon-mediated electronic band transitions, that is, photo-oxidation. These findings have important implications for prior, present, and future studies concerning S-TMDs measured, stored, or manipulated in ambient conditions.

2.
Sensors (Basel) ; 13(2): 2475-83, 2013 Feb 18.
Artigo em Inglês | MEDLINE | ID: mdl-23429510

RESUMO

Low temperature growth of GaAs (LT-GaAs) near 200 °C results in a recombination lifetime of nearly 1 ps, compared with approximately 1 ns for regular temperature ~600 °C grown GaAs (RT-GaAs), making it suitable for ultra high speed detection applications. However, LT-GaAs detectors usually suffer from low responsivity due to low carrier mobility. Here we report electro-optic sampling time response measurements of a detector that employs an AlGaAs heterojunction, a thin layer of LT-GaAs, a channel of RT-GaAs, and a vertical electric field that together facilitate collection of optically generated electrons while suppressing collection of lower mobility holes. Consequently, these devices have detection efficiency near that of RT-GaAs yet provide pulse widths nearly an order of magnitude faster--~6 ps for a cathode-anode separation of 1.3 µm and ~12 ps for distances more than 3 µm.

3.
Adv Mater ; 34(7): e2106827, 2022 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-34773926

RESUMO

Electrical switching of ferroelectric domains and subsequent domain wall motion promotes strong piezoelectric activity, however, light scatters at refractive index discontinuities such as those found at domain wall boundaries. Thus, simultaneously achieving large piezoelectric effect and high optical transmissivity is generally deemed infeasible. Here, it is demonstrated that the ferroelectric domains in perovskite Pb(In1/2 Nb1/2 )O3 -Pb(Mg1/3 Nb2/3 )O3 -PbTiO3 domain-engineered crystals can be manipulated by electrical field and mechanical stress to reversibly and repeatably, with small hysteresis, transform the opaque polydomain structure into a highly transparent monodomain state. This control of optical properties can be achieved at very low electric fields (less than 1.5 kV cm-1 ) and is accompanied by a large (>10 000 pm V-1 ) piezoelectric coefficient that is superior to linear state-of-the-art materials by a factor of three or more. The coexistence of tunable optical transmissivity and high piezoelectricity paves the way for a new class of photonic devices.

4.
Opt Express ; 19(11): 10923-30, 2011 May 23.
Artigo em Inglês | MEDLINE | ID: mdl-21643352

RESUMO

Optical pulse propagation in water is experimentally investigated using an evolutionary algorithm (EA) to control the shape of an optical pulse. The transmission efficiency (ratio of output to input optical power) is maximized by searching the combined amplitude and phase space governing an optical pulse shaper. The transmission efficiency of each tested pulse is physically determined by experiment during the course of the optimization. Combining the EA with an experiment in this manner is a powerful means of improving some figure of merit because no analytical or computational model is required-we optimize directly given the physics of the experiment. In addition, the EA is capable of efficiently searching a large parameter space. Here, we demonstrate improved linear optical pulse propagation near 800nm. Our results demonstrate a pulse with a dramatically narrower bandwidth that coincides with a local absorption minimum (near 800 nm) implying that the transmission efficiency is dominated by water's absorption spectrum.

5.
Aust N Z J Public Health ; 45(4): 325-329, 2021 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-34097327

RESUMO

OBJECTIVES: To report the experience of quarantine for international arrivals to South Australia requiring quarantine in a medi-hotel setting during the COVID-19 pandemic and to describe the range of evidence-based support services to mitigate the mental health impacts of quarantine. METHODS: A range of services targeted at physical and mental wellbeing were provided. Data from 533 adult respondents out of 721 passengers were included. The Kessler 10 was used to measure psychological distress at two time points. RESULTS: About 7.1% of respondents reported psychological distress at time one, reduced to 2.4% at time two. There was no significant difference in psychological distress by gender at either time point. The mean K10 score at time one was 13.6 (standard deviation=5.2) and the mean score at time two was 11.5 (standard deviation=3.1), with a significant reduction in mean scores (p<0.001) between the two time points. CONCLUSIONS: The level of psychological stress in repatriated Australians was low at arrival and improved further at the time of release from quarantine. Implications for public health: A collaborative multi-sector approach to provide support services for individuals in quarantine can mitigate risks to mental wellbeing.


Assuntos
COVID-19/psicologia , Nível de Saúde , Saúde Holística , Transtornos Mentais/terapia , Angústia Psicológica , Quarentena/psicologia , Estresse Fisiológico , Migrantes/psicologia , Adolescente , Adulto , Idoso , Idoso de 80 Anos ou mais , COVID-19/epidemiologia , Feminino , Humanos , Masculino , Transtornos Mentais/epidemiologia , Pessoa de Meia-Idade , Pandemias , SARS-CoV-2 , Austrália do Sul , Adulto Jovem
6.
ACS Appl Mater Interfaces ; 13(1): 836-847, 2021 Jan 13.
Artigo em Inglês | MEDLINE | ID: mdl-33216550

RESUMO

We have directly written nanoscale patterns of magnetic ordering in FeRh films using focused helium-ion beam irradiation. By varying the dose, we pattern arrays with metamagnetic transition temperatures that range from the as-grown film temperature to below room temperature. We employ transmission electron microscopy, X-ray diffraction, and temperature-dependent transport measurements to characterize the as-grown film, and magneto-optic Kerr effect imaging to quantify the He+ irradiation-induced changes to the magnetic order. Moreover, we demonstrate temperature-dependent optical microscopy and conductive atomic force microscopy as indirect probes of the metamagnetic transition that are sensitive to the differences in dielectric properties and electrical conductivity, respectively, of FeRh in the antiferromagnetic (AF) and ferromagnetic (FM) states. Using density functional theory, we quantify strain- and defect-induced changes in spin-flip energy to understand their influence on the metamagnetic transition temperature. This work holds promise for in-plane AF-FM spintronic devices, by reducing the need for multiple patterning steps or different materials, and potentially eliminating interfacial polarization losses due to cross material interfacial spin scattering.

7.
Appl Opt ; 48(32): 6223-8, 2009 Nov 10.
Artigo em Inglês | MEDLINE | ID: mdl-19904320

RESUMO

We report results of scattering measurements using femtosecond pulses to collect a wealth of information in a single experiment. Potential issues with particle scattering, such as variation in particle size, were avoided by using 9 and 50 microm diameter glass fibers. We first establish an angular scattering intensity baseline, and we show that the spectral width of very short pulses leads to smoothing of the angular scattering pattern, consistent with continuous broadband illumination. We then measure the angular scattering pattern from short pulses with a spectrometer and reveal an underlying spectral periodicity of broadband scattered light that is consistent with narrowband cw scattering. Our experimental results compare well with existing theory. We show that such two-dimensional experimental data and derived analytic solution can provide robust characterization of scattering objects even in the presence of noise.

8.
Adv Mater ; 31(43): e1903271, 2019 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-31523860

RESUMO

2D transition metal carbides, known as MXenes, are transparent when the samples are thin enough. They are also excellent electrical conductors with metal-like carrier concentrations. Herein, these characteristics are exploited to replace gold (Au) in GaAs photodetectors. By simply spin-coating transparent Ti3 C2 -based MXene electrodes from aqueous suspensions onto GaAs patterned with a photoresist and lifted off with acetone, photodetectors that outperform more standard Au electrodes are fabricated. Both the Au- and MXene-based devices show rectifying contacts with comparable Schottky barrier heights and internal electric fields. The latter, however, exhibit significantly higher responsivities and quantum efficiencies, with similar dark currents, hence showing better dynamic range and detectivity, and similar sub-nanosecond response speeds compared to the Au-based devices. The simple fabrication process is readily integratable into microelectronic, photonic-integrated circuits and silicon photonics processes, with a wide range of applications from optical sensing to light detection and ranging and telecommunications.

9.
J Vis Exp ; (135)2018 05 23.
Artigo em Inglês | MEDLINE | ID: mdl-29889197

RESUMO

Vanadium dioxide is a material that has a reversible metal-insulator phase change near 68 °C. To grow VO2 on a wide variety of substrates, with wafer-scale uniformity and angstrom level control of thickness, the method of atomic-layer deposition was chosen. This ALD process enables high-quality, low-temperature (≤150 °C) growth of ultrathin films (100-1000 Å) of VO2. For this demonstration, the VO2 films were grown on sapphire substrates. This low temperature growth technique produces mostly amorphous VO2 films. A subsequent anneal in an ultra-high vacuum chamber with a pressure of 7x10-4 Pa of ultra-high purity (99.999%) oxygen produced oriented, polycrystalline VO2 films. The crystallinity, phase, and strain of the VO2 were determined by Raman spectroscopy and X-ray diffraction, while the stoichiometry and impurity levels were determined by X-ray photoelectron spectroscopy, and finally the morphology was determined by atomic force microscopy. These data demonstrate the high-quality of the films grown by this technique. A model was created to fit to the data for VO2 in its metallic and insulating phases in the near infrared spectral region. The permittivity and refractive index of the ALD VO2 agreed well with the other fabrication methods in its insulating phase, but showed a difference in its metallic state. Finally, the analysis of the films' optical properties enabled the creation of a wavelength- and temperature-dependent model of the complex optical refractive index for developing VO2 as a tunable refractive index material.


Assuntos
Óxidos/química , Análise Espectral Raman/métodos , Compostos de Vanádio/química , Temperatura
10.
Sci Rep ; 8(1): 16487, 2018 Nov 07.
Artigo em Inglês | MEDLINE | ID: mdl-30405192

RESUMO

Metal films deposited on graphene are known to influence its electronic properties, but little is known about graphene's interactions with very low work function rare earth metals. Here we report on the work functions of a wide range of metals deposited on n-type epitaxial graphene (EG) as measured by Kelvin Probe Force Microscopy (KPFM). We compare the behaviors of rare earth metals (Pr, Eu, Er, Yb, and Y) with commonly used noble metals (Cr, Cu, Rh, Ni, Au, and Pt). The rare earth films oxidize rapidly, and exhibit unique behaviors when on graphene. We find that the measured work function of the low work function group is consistently higher than predicted, unlike the noble metals, which is likely due to rapid oxidation during measurement. Some of the low work function metals interact with graphene; for example, Eu exhibits bonding anomalies along the metal-graphene perimeter. We observe no correlation between metal work function and photovoltage, implying the metal-graphene interface properties are a more determinant factor. Yb emerges as the best choice for future applications requiring a low-work function electrical contact on graphene. Yb films have the strongest photovoltage response and maintains a relatively low surface roughness, ~5 nm, despite sensitivity to oxidation.

11.
Opt Express ; 15(8): 4960-5, 2007 Apr 16.
Artigo em Inglês | MEDLINE | ID: mdl-19532745

RESUMO

We demonstrate a solitary pulse output from an 8.3-MHz mode-locked Yb-doped fiber laser, operating entirely in the normal dispersion regime. The typical output hyperbolic-secant pulses have a 14-ps pulse width and a 1.2-mW average output power. The spectrum has steep band edges with a 6.1-nm width and a tunable center wavelength between 1050 and 1080 nm. Using a frequency-resolved optical gating setup, we show that the pulse intensity and phase profiles are consistent with a chirped soliton. Energy quantization is observed, thus demonstrating the non-parabolic nature of these pulses. The laser output is compressed to near the transform limit (approximately 430 fs).

12.
ACS Nano ; 11(8): 7988-7994, 2017 08 22.
Artigo em Inglês | MEDLINE | ID: mdl-28763189

RESUMO

Monolayer transition metal dichalcogenides are promising materials for valleytronic operations. They exhibit two inequivalent valleys in the Brillouin zone, and the valley populations can be directly controlled and determined using circularly polarized optical excitation and emission. The photoluminescence polarization reflects the ratio of the two valley populations. A wide range of values for the degree of circularly polarized emission, Pcirc, has been reported for monolayer WS2, although the reasons for the disparity are unclear. Here, we optically populate one valley and measure Pcirc to explore the valley population dynamics at room temperature in a large number of monolayer WS2 samples synthesized via chemical vapor deposition. Under resonant excitation, Pcirc ranges from 2 to 32%, and we observe a pronounced inverse relationship between photoluminescence (PL) intensity and Pcirc. High-quality samples exhibiting strong PL and long exciton relaxation time exhibit a low degree of valley polarization, and vice versa. This behavior is also demonstrated in monolayer WSe2 samples and transferred WS2, indicating that this correlation may be more generally observed and account for the wide variations reported for Pcirc. Time-resolved PL provides insight into the role of radiative and nonradiative contributions to the observed polarization. Short nonradiative lifetimes result in a higher measured polarization by limiting opportunity for depolarizing scattering events.

13.
Sci Rep ; 6: 35538, 2016 10 24.
Artigo em Inglês | MEDLINE | ID: mdl-27774984

RESUMO

Luminescent gold nanocrystals (AuNCs) are a recently-developed material with potential optic, electronic and biological applications. They also demonstrate energy transfer (ET) acceptor/sensitization properties which have been ascribed to Förster resonance energy transfer (FRET) and, to a lesser extent, nanosurface energy transfer (NSET). Here, we investigate AuNC acceptor interactions with three structurally/functionally-distinct donor classes including organic dyes, metal chelates and semiconductor quantum dots (QDs). Donor quenching was observed for every donor-acceptor pair although AuNC sensitization was only observed from metal-chelates and QDs. FRET theory dramatically underestimated the observed energy transfer while NSET-based damping models provided better fits but could not reproduce the experimental data. We consider additional factors including AuNC magnetic dipoles, density of excited-states, dephasing time, and enhanced intersystem crossing that can also influence ET. Cumulatively, data suggests that AuNC sensitization is not by classical FRET or NSET and we provide a simplified distance-independent ET model to fit such experimental data.

14.
Sci Rep ; 5: 17580, 2015 Dec 02.
Artigo em Inglês | MEDLINE | ID: mdl-26627932

RESUMO

Avalanche photodiodes (APDs) are essential components in quantum key distribution systems and active imaging systems requiring both ultrafast response time to measure photon time of flight and high gain to detect low photon flux. The internal gain of an APD can improve system signal-to-noise ratio (SNR). Excess noise is typically kept low through the selection of material with intrinsically low excess noise, using separate-absorption-multiplication (SAM) heterostructures, or taking advantage of the dead-space effect using thin multiplication regions. In this work we demonstrate the first measurement of excess noise and gain-bandwidth product in III-V nanopillars exhibiting substantially lower excess noise factors compared to bulk and gain-bandwidth products greater than 200 GHz. The nanopillar optical antenna avalanche detector (NOAAD) architecture is utilized for spatially separating the absorption region from the avalanche region via the NOA resulting in single carrier injection without the use of a traditional SAM heterostructure.

15.
Rev Sci Instrum ; 81(10): 103107, 2010 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-21034075

RESUMO

We use a compact chirped-pulse amplified system to harmonically generate ultrashort pulses for aerosol fluorescence measurements. The seed laser is a compact, all-normal dispersion, mode-locked Yb-doped fiber laser with a 1050 nm center wavelength operating at 41 MHz. Average powers of more than 1.2 W at 525 nm and 350 mW at 262 nm are generated with <500 fs pulse durations. The pulses are time-stretched with high-dispersion fiber, amplified by a high-power, large-mode-area fiber amplifier, and recompressed using a chirped volume holographic Bragg grating. The resulting high-peak-power pulses allow for highly efficient harmonic generation. We also demonstrate for the first time to our knowledge, the use of a mode-locked ultraviolet source to excite individual biological particles and other calibration particles in an inlet air flow as they pass through an optical chamber. The repetition rate is ideal for biofluorescence measurements as it allows faster sampling rates as well as the higher peak powers as compared to previously demonstrated Q-switched systems while maintaining a pulse period that is longer than the typical fluorescence lifetimes. Thus, the fluorescence excitation can be considered to be quasicontinuous and requires no external synchronization and triggering.


Assuntos
Lasers , Espectrometria de Fluorescência/métodos , Raios Ultravioleta , Aerossóis , Elasticidade , Corantes Fluorescentes/química , Látex/química , Fótons , Poliestirenos/química
16.
Opt Lett ; 30(4): 406-8, 2005 Feb 15.
Artigo em Inglês | MEDLINE | ID: mdl-15762443

RESUMO

We demonstrate a mode-locked erbium-doped fiber laser with a 1-microm InGaAs saturable absorber that produces 84-ps, 1-nJ transform-limited pulses. Measurements of the InGaAs multiple quantum well revealed a slow saturable absorber that is useful for passive mode locking. Optical fiber was added to extend the cavity and vary the repetition rate from 51 kHz to 5.4 MHz. The narrow spectral width of the laser output (<0.04 nm) permits amplification to 0.2 microJ/pulse with minimal pulse broadening. Pulse energies as large as 1.7 microJ can be achieved with pulse widths of <330 ps. Average powers of 0.5 W at megahertz repetition rates are demonstrated.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA