Examining Science and Technology/Engineering Educators' Views of Teaching Biomedical Concepts Through Physical Computing.

Programming and automation continue to evolve rapidly and advance the capabilities of science, technology, engineering, and mathematics (STEM) fields. However, physical computing (the integration of programming and interactive physical devices) integrated within biomedical contexts remains an area of limited focus in secondary STEM education programs. As this is an emerging area, many educators may not be well prepared to teach physical computing concepts within authentic biomedical contexts. This shortcoming provided the rationale for this study, to examine if professional development (PD) had a noticeable influence on high school science and technology and engineering (T&E) teachers' (1) perceptions of teaching biomedical and computational thinking (CT) concepts and (2) plans to integrate physical computing within the context of authentic biomedical engineering challenges. The findings revealed a significant difference in the amount of biomedical and CT concepts that teachers planned to implement as a result of the PD. Using a modified version of the Science Teaching Efficacy Belief Instrument (STEBI-A) Riggs and Enochs in Science Education, 74(6), 625-637 (1990), analyses revealed significant gains in teachers' self-efficacy toward teaching both biomedical and CT concepts from the PD. Further analyses revealed that teachers reported increases in their perceived knowledge of biomedical and CT concepts and a significant increase in their intent to collaborate with a science or T&E educator outside of their content area. This study provides implications for researchers and educators to integrate more biomedical and physical computing instruction at the secondary education level.

Experimental Hemodynamics Within the Penn State Fontan Circulatory Assist Device.

For children born with a single functional ventricle, the Fontan operation bypasses the right ventricle by forming a four-way total cavopulmonary connection and adapts the existing ventricle for the systemic circulation. However, upon reaching adulthood, many Fontan patients exhibit low cardiac output and elevated venous pressure, eventually requiring a heart transplantation. Despite efforts in developing a new device or using an existing device for failing Fontan support, there is still no Food and Drug Administration-approved device for subpulmonary support. Penn State University is developing a hydrodynamically levitated Fontan circulatory assist device (FCAD) for bridge-to-transplant or destination therapy. The hemodynamics within the FCAD, at both steady and patient averaged pulsatile conditions for three physiological pump operating conditions, were quantified using particle image velocimetry (PIV) to determine the velocity magnitudes and Reynolds normal and shear stresses within the device. Data were acquired at three planes (0 mm and ±25% of the radius) for the inferior and superior vena cavae inlets and the pulmonary artery outlet. The inlets had a blunt velocity profile that became skewed toward the collecting volute as fluid approached the rotor. At the outlet, regardless of the flow condition, a high-velocity jet exited the volute and moved downstream in a helical pattern. Turbulent stresses observed at the volute exit were influenced by the rotor's rotation. Regardless of inlet conditions, the pump demonstrated advantageous behavior for clinical use with a predictable flow field and a low risk of platelet adhesion and hemolysis based on calculated wall shear rates and turbulent stresses, respectively.

Ventricular contractility and compliance measured during axial flow blood pump support: in vitro study.

End-systolic elastance and end-diastolic compliance have been used to quantify systolic and diastolic function of the left ventricle (LV). In this study, the effective end-systolic elastance, (EES )eff , end-systolic volume intercept, (V0 )eff , and end-diastolic compliance of the LV were assessed at various levels of left ventricular assist device (LVAD) support. We tested the hypothesis that (EES )eff and (V0 )eff vary as a function of LVAD speed, while compliance does not change. The Penn State in vitro cardiac simulator was used in two heart conditions (control and heart failure [HF]) with the HeartMate II axial flow LVAD. The LVAD speed was linearly increased from 6000 to 11 000 rpm, with 500-rpm increments. The end-systolic and end-diastolic pressure-volume relationships were estimated at each LVAD speed. Acute LVAD support itself showed pseudo-improvement of ventricular contractility. The (EES )eff and (V0 )eff in HF were found to be dependent on the LVAD speed. The effective compliance for both control and HF was independent of the LVAD speed. Therefore, when examining the time-course cardiac recovery induced by the LVAD support, LV performance should be measured immediately before and after LVAD support while keeping LVAD speed consistent to avoid potential overestimation of long-term cardiac recovery.

Kinetic and Dynamic Effects on Degradation of von Willebrand Factor.

The loss of high molecular weight multimers (HMWM) of von Willebrand factor (vWF) in aortic stenosis (AS) and continuous-flow left ventricular assist devices (cf-LVADs) is believed to be associated with high turbulent blood shear. The objective of this study is to understand the degradation mechanism of HMWM in terms of exposure time (kinetic) and flow regime (dynamics) within clinically relevant pathophysiologic conditions. A custom high-shear rotary device capable of creating fully controlled exposure times and flows was used. The system was set so that human platelet-poor plasma flowed through at 1.75 ml/sec, 0.76 ml/sec, or 0.38 ml/sec resulting in the exposure time ( texp ) of 22, 50, or 100 ms, respectively. The flow was characterized by the Reynolds number (Re). The device was run under laminar (Re = 1,500), transitional (Re = 3,000; Re = 3,500), and turbulent (Re = 4,500) conditions at a given texp followed by multimer analysis. No degradation was observed at laminar flow at all given texp . Degradation of HMWM at a given texp increases with the Re. Re ( p < 0.0001) and texp ( p = 0.0034) are significant factors in the degradation of HMWM. Interaction between Re and texp , however, is not always significant ( p = 0.73).

An implantable Fabry-Pérot pressure sensor fabricated on left ventricular assist device for heart failure.

Continuous flow left ventricular assist devices (LVADs) are commonly used as bridge-to-transplantation or destination therapy for heart failure patients. However, non-optimal pumping speeds can reduce the efficacy of circulatory support or cause dangerous ventricular arrhythmias. Optimal flow control for continuous flow LVADs has not been defined and calls for an implantable pressure sensor integrated with the LVAD for real-time feedback control of pump speed based on ventricular pressure. A MEMS pressure sensor prototype is designed, fabricated and seamlessly integrated with LVAD to enable real-time control, optimize its performance and reduce its risks. The pressure sensing mechanism is based on Fabry-Pérot interferometer principle. A biocompatible parylene diaphragm with a silicon mirror at the center is fabricated directly on the inlet shell of the LVAD to sense pressure changes. The sensitivity, range and response time of the pressure sensor are measured and validated to meet the requirements of LVAD pressure sensing.

Dynamics of Blood Flows in Aortic Stenosis: Mild, Moderate, and Severe.

Supraphysiologic high shear stresses created in calcific aortic stenosis (AS) are known to cause hemostatic abnormalities, however, the relationship between the complex blood flows over the severity of AS and hemostatic abnormalities still remains unclear. This study systematically characterized the blood flow in mild, moderate, and severe AS. A series of large eddy simulations (LES) validated by particle image velocimetry were performed on physiologically representative AS models with a peak physiologic flow condition of 18 liter per minute. Time-accurate velocity fields, transvalvular pressure gradient, and laminar viscous-and turbulent (or Reynolds) shear stresses (RSSmax) were evaluated for each degree of severity. The peak velocities of mild, moderate, and severe AS were on the order of 2.0, 4.0, and 8.0 m/s, respectively. Jet velocity in severe AS was highly skewed with extremely high velocity (as high as 8 m/s) and mainly traveled through the posterior aortic wall up to the aortic arch while still carrying a relatively high velocity, that is, >4 m/s. The mean laminar viscous wall shear stresses (WSS) for mild, moderate, and severe AS were on the order of 40, 100, and 180 Pa, respectively. The RSSmax were on the order of 260, 490, and 2,500 Pa for mild, moderate, and severe AS, respectively. This study may provide a link between altered flows in AS and hemostatic abnormalities such as acquired von Willebrand syndrome and hemolysis, thus, help diagnosing and timing of the treatment.

Miniaturized Fontan Circulation Assist Device: Chronic In Vivo Evaluation.

We have miniaturized and optimized our implantable rotary blood pump developed to provide long-term mechanical right heart support for patients who have failing Fontan circulation. The objective of this study was to evaluate the miniaturized Fontan circulation assist device (mini-FCAD) during 30-day sheep studies (n = 5). A complete right heart bypass was performed and all return flow was supported by the pump. Postoperatively, unfractionated heparin was given to maintain thromboelastography R times of 2× normal. The first two studies were terminated on day 0 and day 4 due to complications. In the final three studies, the animals remained healthy and were electively terminated at 30 ± 2 days. Pump flow was between 5 and 7 lpm, left atrial pressure remained normal, and inlet pressures were between 3 and 18 mm Hg with no incidents of suction. There was no evidence of hemolysis, end organ or pulmonary dysfunction, thromboembolic events, nor thermal damage to the surrounding tissue. Explanted devices from two studies were free of thrombi and in the third study there were unattached thrombi on the SVC inlet of the rotor. The mini-FCAD was successfully tested in vivo as a right heart replacement device demonstrating adequate circulatory support and normal physiologic pulmonary and venous pressures.

Continuous flow left ventricular pump support and its effect on regional left ventricular wall stress: finite element analysis study.

Left ventricular assist device (LVAD) support unloads left ventricular (LV) pressure and volume and decreases wall stress. This study investigated the effect of systematic LVAD unloading on the 3-dimensional myocardial wall stress by employing finite element models containing layered fiber structure, active contractility, and passive stiffness. The HeartMate II(®) (Thoratec, Inc., Pleasanton, CA) was used for LV unloading. The model geometries and hemodynamic conditions for baseline (BL) and LVAD support (LVsupport) were acquired from the Penn State mock circulatory cardiac simulator. Myocardial wall stress of BL was compared with that of LVsupport at 8,000, 9,000, 10,000 RPM, providing mean pump flow (Q(mean)) of 2.6, 3.2, and 3.7 l/min, respectively. LVAD support was more effective at unloading during diastole as compared to systole. Approximately 40, 50, and 60% of end-diastolic wall stress reduction were achieved at Q(mean) of 2.6, 3.2, and 3.7 l/min, respectively, as compared to only a 10% reduction of end-systolic wall stress at Q(mean) of 3.7 l/min. In addition, there was a stress concentration during systole at the apex due to the cannulation and reduced boundary motion. This modeling study can be used to further understand optimal unloading, pump control, patient management, and cannula design.

Effective ventricular unloading by left ventricular assist device varies with stage of heart failure: cardiac simulator study.

Although the use of left ventricular assist devices (LVADs) as a bridge-to-recovery (BTR) has shown promise, clinical success has been limited due to the lack of understanding the timing of implantation, acute/chronic device setting, and explantation. This study investigated the effective ventricular unloading at different heart conditions by using a mock circulatory system (MCS) to provide a tool for pump parameter adjustments. We tested the hypothesis that effective unloading by LVAD at a given speed varies with the stage of heart failure. By using a MCS, systematic depression of cardiac performance was obtained. Five different stages of heart failure from control were achieved by adjusting the pneumatic systolic/diastolic pressure, filling pressure, and systemic resistance. The Heart Mate II® (Thoratec Corp., Pleasanton, CA) was used for volumetric and pressure unloading at different heart conditions over a given LVAD speed. The effective unloading at a given LVAD speed was greater in more depressed heart condition. The rate of unloading over LVAD speed was also greater in more depressed heart condition. In conclusion, to get continuous and optimal cardiac recovery, timely increase in LVAD speed over a period of support is needed while avoiding the akinesis of aortic valve.