Two new convenient syntheses of 14C-squalene from turbinaric acid.

Carbon-14 labeled (6E,10E,14E,18E)-2,6,10,15,19,23-hexamethyltetracosa-2,6,10,14,18,22-hexaene, also known as squalene, was synthesized as a tool for pharmacokinetic studies. Two simple and efficient labeling approaches were developed to give [2-14 C]-squalene and [3-14 C]-squalene from a halogenated precursor derived from turbinaric acid. They were obtained in 13.5% radiochemical yield in 6 steps and in 38% radiochemical yield in 3 steps respectively from carbon-14 labeled potassium cyanide with a radiochemical purity higher than 98% in both cases.

Effect of deuteration on the metabolism and clearance of some pharmacologically active compounds--synthesis and in vitro metabolism of deuterated derivatives of dronedadrone.

The synthesis and in vitro metabolism studies of a family of specifically deuterated derivatives of dronedarone are described. Metabolic stability and clearance of the parent compound are not sensitive to deuterium substitution, irrespective of the position of the heavy label.

Radiosynthesis of (E)-N-(2-[11C]methoxybenzyl)-3-phenyl-acrylamidine, a novel subnanomolar NR2B subtype-selective NMDA receptor antagonist.

Recently, a novel series of amidines has been described, exhibiting high NR2B-subtype selective N-methyl-D-aspartate (NMDA) antagonist activity with nanomolar or subnanomolar affinity. Within the styrylamidine subclass, (E)-N-(2-methoxybenzyl)-3-phenyl-acrylamidine (1), displayed the highest affinity (Ki=0.7 nM versus [(3)H]ifenprodil) and was considered an appropriate candidate for isotopic labelling with carbon-11 (T(1/2): 20.38 min) at its methoxy group for imaging of NMDA receptors with PET. Derivative 1 has been labelled from the corresponding nor-analogue using [(11)C]methyl triflate and the following experimental conditions : (1) trapping at -10 degrees C of [(11)C]methyl triflate in 300 microL of acetone containing 0.6-0.8 mg of precursor 5 (2.4-3.2 micromol) and 5 microL of a 3M solution of NaOH in water (about 5 eq.); (2) concentration to dryness of the reaction mixture (at 110 degrees C, using a helium stream for 1-2 min); (3) taking up the residue with 0.5 mL of the HPLC mobile phase and (4) purification using semi-preparative HPLC (SymmetryPrep) C-18, Waters, 300 x 7.8 mm). Typically, starting from a 1.5 Ci (55.5 GBq) [(11)C]CO(2) production batch, 120-240 m Ci (4.44-8.88 GBq) of [(11)C]-1 (20-40% decay-corrected radiochemical yield, n=5) was obtained within a total synthesis time of 25-30 min. Specific radioactivities ranged from 0.8 to 1.2 Ci/micromol (29.6-44.4 GBq/micromol) at the end of radiosynthesis. No attempts were made to further optimise these reactions, as sufficient material was obtained to allow for preliminary pharmacological characterisation.

Evaluation of drug penetration into the brain: a double study by in vivo imaging with positron emission tomography and using an in vitro model of the human blood-brain barrier.

The blood-brain barrier (BBB) permeabilities of 11 compounds were measured both in vitro with a newly developed coculture-based model of human BBB and in vivo with positron emission tomography (PET). The 11 compounds were fluoropyridinyl derivatives labeled with the positron-emitter fluorine-18, [(18)F]F-A-85380 [2-[(18)F]fluoro-3-[2(S)-2 azetidinylmethoxy]pyridine], and 10 selected N-substituted-azetidinyl and pyrrolidinyl closely related [(18)F]fluoropyridinyl derivatives (including [N'-aromatic/aliphatic]-thioureas, -ureas, and -amides). The in vitro BBB model, a new coculture system of primary human brain endothelial cells and astrocytes, was used to measure the permeability coefficient for each compound. Dynamic PET studies were performed in rats with the same compounds, and a two-compartment model analysis was used to calculate their in vivo permeability coefficients. The 11 derivatives differed in their degree of BBB passage and transport mechanism. The analysis of PET data showed a significant cerebral uptake for six derivatives, for which the in vitro evaluation indicated active influx or free diffusion. Five derivatives displayed low in vivo cerebral uptake, in agreement with the observation of an in vitro active efflux. Overall, there was a remarkable correlation between the in vitro and in vivo permeability coefficients (r = 0.99). This double study proves a close correlationship between the assessment of the BBB passage in vitro and in vivo. The in vitro model of human BBB offers the possibility of subtle discrimination of various BBB permeability degrees and transport mechanisms. Conversely, small animal PET imaging appears suitable to screen directly in vivo brain targeting of drugs or radiopharmaceutical candidates.

1-[3-(2-[18F]fluoropyridin-3-yloxy)propyl]pyrrole-2,5-dione: design, synthesis, and radiosynthesis of a new [18F]fluoropyridine-based maleimide reagent for the labeling of peptides and proteins.

FPyME (1-[3-(2-fluoropyridin-3-yloxy)propyl]pyrrole-2,5-dione) was designed as a [(18)F]fluoropyridine-based maleimide reagent for the prosthetic labeling of peptides and proteins via selective conjugation with a thiol (sulfhydryl) function. Its pyridinyl moiety carries the radioactive halogen (fluorine-18) which can be efficiently incorporated via a nucleophilic heteroaromatic substitution, and its maleimido function ensures the efficient alkylation of a free thiol function as borne by cysteine residues. [(18)F]FPyME (HPLC-purified) was prepared in 17-20% non-decay-corrected yield, based on starting [(18)F]fluoride, in 110 min using a three-step radiochemical pathway. The developed procedure involves (1) a high-yield nucleophilic heteroaromatic ortho-radiofluorination on [3-(3-tert-butoxycarbonylaminopropoxy)pyridin-2-yl]trimethylammonium trifluoromethanesulfonate as the fluorine-18 incorporation step, followed by (2) rapid and quantitative TFA-induced removal of the N-Boc-protective group and (3) optimized maleimide formation using N-methoxycarbonylmaleimide. Typically, 4.8-6.7 GBq (130-180 mCi) of radiochemically pure [(18)F]FPyME ([(18)F]-1) could be obtained after semipreparative HPLC in 110 min starting from a cyclotron production batch of 33.3 GBq (900 mCi) of [(18)F]fluoride (overall radiochemical yields, based on starting [(18)F]fluoride: 28-37% decay-corrected). [(18)F]FPyME ([(18)F]-1) was first conjugated with a small model hexapeptide ((N-Ac)KAAAAC), confirming the excellent chemoselectivity of the coupling reaction (CH(2)SH versus CH(2)NH(2)) and then conjugated with two 8-kDa proteins of interest, currently being developed as tumor imaging agents (c-AFIM-0 and c-STxB). Conjugation was achieved in high yields (60-70%, isolated and non-decay-corrected) and used optimized, short-time reaction conditions (a 1/9 (v/v) mixture of DMSO and 0.05 M aq Tris NaCl buffer (pH 7.4) or 0.1 M aq PBS (pH 8), at room temperature for 10 min) and purification conditions (a gel filtration using a Sephadex NAP-10 cartridge or a SuperDex Peptide HR 10/30 column), both compatible with the chemical stability of the proteins and the relatively short half-life of the radioisotope concerned. The whole radiosynthetic procedure, including the preparation of the fluorine-18-labeled reagent, the conjugation with the protein and the final purification took 130-140 min. [(18)F]FPyME ([(18)F]-1) represents a new, valuable, thiol-selective, fluorine-18-labeled reagent for the prosthetic labeling with fluorine-18 of peptides and proteins. Because of its excellent chemoselectivity, [(18)F]FPyME offers an interesting alternative to the use of the nonselective carboxylate and amine-reactive [(18)F]reagents and can therefore advantageously be used for the design and development of new peptide- and protein-based radiopharmaceuticals for PET.

Design and synthesis of a new [18F]fluoropyridine-based haloacetamide reagent for the labeling of oligonucleotides: 2-bromo-N-[3-(2-[18F]fluoropyridin-3-yloxy)propyl]acetamide.

Based on the recently highlighted potential of nucleophilic heteroaromatic ortho-radiofluorinations in the preparation of fluorine-18-labeled radiotracers and radiopharmaceuticals for PET, a [(18)F]fluoropyridine-based bromoacetamide reagent has been prepared and used in prosthetic group introduction for the labeling of oligonucleotides. [(18)F]FPyBrA (2-bromo-N-[3-(2-[(18)F]fluoropyridin-3-yloxy)propyl]acetamide) was designed as a radiochemically feasible reagent, its pyridinyl moiety both carrying the radioactive halogen (fluorine-18) and allowing its efficient incorporation via a nucleophilic heteroaromatic substitution, and its 2-bromoacetamide function, ensuring the efficient alkylation of a phosphorothioate monoester group born at the 3'- or 5'-end of single-stranded oligonucleotides. [(18)F]FPyBrA (HPLC-purified) was efficiently prepared in 18-20% non-decay-corrected yield (based on starting [(18)F]fluoride) using a three-step radiochemical pathway in 80-85 min. The developed procedure involves (1) a high-yield nucleophilic heteroaromatic ortho-radiofluorination as the fluorine-18 incorporation-step (70-85% radiochemical yield) and uses [3-(3-tert-butoxycarbonylaminopropoxy)pyridin-2-yl]trimethylammonium trifluoromethanesulfonate as precursor for labeling, followed by (2) rapid and quantitative TFA-removal of the N-Boc-protective group and (3) condensation with 2-bromoacetyl bromide (45-65% radiochemical yield). Typically, 3.3-3.7 GBq (90-100 mCi) of HPLC-purified [(18)F]FPyBrA could be obtained in 80-85 min, starting from 18.5 GBq (500 mCi) of a cyclotron production batch of [(18)F]fluoride. [(18)F]FPyBrA was regioselectively conjugated with 9-mer and 18-mer single-stranded oligonucleotides, provided with a phosphorothioate monoester group at their 3'-end. Both natural phosphodiester DNAs and in vivo-stable 2'-methoxy and -fluoro-modified RNAs were used. Conjugation uses optimized, short-time reaction conditions (MeOH/0.1 M PBS pH 7.4, 15 min, 120 degrees C), both compatible with the chemical stability of the oligonucleotides (ONs) and the half-life of fluorine-18. Conjugated [(18)F]ONs were finally purified by RP-HPLC and desalted using a Sephadex NAP-10 column. The whole radiosynthetic procedure, including the preparation of the fluorine-18-labeled reagent, the conjugation with the oligonucleotide, and the HPLC purification and formulation lasted 140-160 min. [(18)F]FPyBrA represents a valuable alternative to the already reported N-(4-[(18)F]fluorobenzyl)-2-bromoacetamide for the design and development of oligonucleotide-based radiopharmaceuticals for PET.