Arabinoxylan from non-malted cereals can act as mouthfeel contributor in beer.

A satisfying mouthfeel is essential for the production of non-alcoholic, low-alcohol beers and light beers. This paper highlights the importance of non-starch carbohydrates as mouthfeel contributors in this context. Beers were brewed with a substitution of 20 % barley malt grits by non-malted barley, rye or oats compared to a control. For the beer brewed with rye, both a 53 % increase in arabinoxylan content and an increase in the average degree of polymerization from 29 to 50 were observed. Compared to the control beer (1.48 mm²/s), viscosity was the highest for the rye beer (1.85 mm²/s). Multivariate data analysis underlined the role of arabinoxylan content and degree of polymerization as determinants of beer viscosity. A sensory panel distinguished a low-alcohol rye beer as the one with increased fullness compared to a 100 % malt beer. These experiments suggest that rye addition can be used as a strategy to increase the beer fullness.

Different gelatinization characteristics of small and large barley starch granules impact their enzymatic hydrolysis and sugar production during mashing.

This study investigates the impact of different gelatinization characteristics of small and large barley starch granules on their enzymatic hydrolysis and sugar production during mashing. Therefore, a barley malt suspension was consecutively incubated at 45, 62, 72 and 78 °C to monitor starch behavior and enzymatic starch hydrolysis and sugar production. The combination of microscopic and rapid visco analyses showed that small starch granules persisted longer in the system and were present non-gelatinized at temperatures higher than 62 °C. HPAEC-PAD analysis showed that 8% of the total amount of starch, predominantly small granules, gelatinized at temperatures between 62 °C and 78 °C. Due to their delayed gelatinization in this system, their enzymatic hydrolysis yielded relatively more dextrins compared to what was observed for large granules. It was concluded that small granules should be taken into account when optimizing enzymatic hydrolysis of barley starch, like in brewing, distilling or bio-ethanol production.

Optimisation of a complete method for the analysis of volatiles involved in the flavour stability of beer by solid-phase microextraction in combination with gas chromatography and mass spectrometry.

Headspace solid-phase microextraction combined with gas chromatography and mass spectrometry was used for the quantification of 32 volatiles which represent the typical chemical reactions that can occur during beer ageing. Detection was accomplished by employing on-fibre derivatisation using o-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine (PFBHA) and normal HS-SPME extraction. The procedures were optimised for SPME fibre selection, PFBHA loading temperature and time, extraction temperature and time, and effect of salt addition. Interference of matrix effects was overcome by calibrating according to the standard addition method and by using internal standards. Afterwards, the method was validated successfully and was applied to study the flavour stability of different beer types.

Optimisation of wort volatile analysis by headspace solid-phase microextraction in combination with gas chromatography and mass spectrometry.

The aim of this study was to create a simple, solventless technique without derivatisation in order to analyze a broad range of volatiles in beer wort. A method was developed using headspace solid-phase microextraction coupled with gas chromatography and mass spectrometry. The procedure was optimised by selection of the appropriate fibre and optimisation of extraction temperature, extraction time, and salting-out. The detection limits were well below the actual wort concentrations of the selected volatiles, ranging from 12 ng/l for linalool to 0.53 microg/l for furfural. Moreover, the procedure showed a good linearity and was applied to the analysis of wort samples taken from a wort boiling process in an industrial brewery.

Influence of lipids in the generation of phenylacetaldehyde in wort-related model systems.

The effect of lipids on the formation of the Strecker aldehyde phenylacetaldehyde during wort boiling was studied to determine the role that small changes in the lipid content of the wort have in the production of significant flavor compounds in beer. Wort was treated with 0-2.77 mmol per liter of glucose, linoleic acid, or 2,4-decadienal and heated at 60-98 degrees C for 1 h. After this time, the amount of the Strecker aldehyde phenylacetaldehyde increased in the samples treated with linoleic acid or decadienal but not in the samples treated with glucose. Thus, the amount of phenylacetaldehyde produced in the presence of linoleic acid was 1.1-2.5 times the amount of the Strecker aldehyde produced in the control wort, and this amount increased to 3.6-4.6 times when decadienal was employed. The higher reactivity of decadienal than linoleic acid for this reaction decreased with temperature and was related to the oxidation of linoleic acid that occurred to a higher extent at higher temperatures. The above results suggest that lipids can contribute to the formation of Strecker aldehydes during wort boiling and that changes in the lipid content of the wort will produce significant changes in the formation of Strecker aldehydes in addition to other well-known consequences in beer quality and yeast metabolism. On the other hand, because of the high glucose content in wort, small changes in its content are not expected to affect the amount of Strecker aldehydes produced.

Characterization of volatiles in unhopped wort.

The volatile fraction of wort components was studied during boiling. Not less than 118 volatile compounds were identified when unhopped pilsner wort was boiled and samples of wort and condensed vapors were analyzed with headspace SPME-GC/MS, of which 54 were confirmed with reference compounds. The wort samples contained 61 identifiable compounds, while the vapor condensate yielded 108 different compounds. Almost 30 known compounds were found that have not been described before in unhopped pilsner wort. One previously unknown aldol reaction product was tentatively identified as 2-phenyl-2-octenal. The detection of branched 2-alkenals underlines the importance of the aldol condensation in Maillard-type reactions, while the tentative identification of alkyloxazoles and alkylthiazoles could once more accentuate the central role of alpha-dicarbonyl compounds, aldehydes, and amino acids in flavor generation. The condensation of wort vapors joined with the SPME-GC/MS technique has proven to be a useful tool in volatile analysis.

Decrease of aged beer aroma by the reducing activity of brewing yeast.

The flavor profile of beer is subject to changes during storage. Since, possibly, yeast has an influence on flavor stability, the aim of this study was to examine if there is a direct impact of brewing yeast on aged aroma. This was achieved by refermentation of aged beers. It was shown that several aged aroma notes, such as cardboard, ribes, Maillard and Madeira, were removed almost entirely by brewing yeast, independently of the yeast or the beer type. This was explained by the reduction of aldehydes, mainly (E)-2-nonenal, Strecker aldehydes, 5-hydroxymethylfurfural and diacetyl, to their corresponding alcohols. Furthermore, it became evident that the reducing capacity of brewing yeast is high, but that yeast strain and compound specific residual concentrations remained in the refermented beer independently of the initial concentration. Finally, it appeared that aldehydes were not only reduced but also formed during refermentation.

Determination of carbonyl compounds in beer by derivatisation and headspace solid-phase microextraction in combination with gas chromatography and mass spectrometry.

Headspace solid-phase microextraction (SPME) followed by gas chromatography and mass spectrometry was applied for quantification of 41 chemically diverse carbonyl compounds in beer. Therefore, in-solution derivatisation with o-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine (PFBHA) combined with SPME was optimised for fibre selection, PFBHA concentration, extraction temperature and time and ionic strength. Afterwards, the method was calibrated and validated successfully and extraction efficiency was compared to sampling with on-fibre derivatisation. In-solution derivatisation enabled the detection of several compounds that were poorly extracted with on-fibre derivatisation such as 5-hydroxymethylfurfural, acrolein, hydroxyacetone, acetoin, glyoxal and methylglyoxal. Others, especially (E)-2-nonenal, were extracted better with on-fibre derivatisation.

Release and evaporation of volatiles during boiling of unhopped wort.

The release and evaporation of volatile compounds was studied during boiling of wort. The observed parameters were boiling time, boiling intensity, wort pH, and wort density. The effect of every parameter was discussed and approached chemically, with an eye on beer-aging processes. The results indicated that pH highly influenced the release of flavor compounds and that the formation of Strecker aldehydes was linear with boiling time. However, because of evaporation of volatiles, information about the applied thermal load on wort is lost when using a volatile heat load indicator. The thiobarbituric acid (TBA) method, which includes the nonvolatile precursors of volatile aging compounds, proved to be a more reliable method to determine all kinds of heat load on wort. Finally, it was discussed how the obtained insights could help to understand the mechanism of beer aging.

Immobilized yeast cell systems for continuous fermentation applications.

In several yeast-related industries, continuous fermentation systems offer important economical advantages in comparison with traditional systems. Fermentation rates are significantly improved, especially when continuous fermentation is combined with cell immobilization techniques to increase the yeast concentration in the fermentor. Hence the technique holds a great promise for the efficient production of fermented beverages, such as beer, wine and cider as well as bio-ethanol. However, there are some important pitfalls, and few industrial-scale continuous systems have been implemented. Here, we first review the various cell immobilization techniques and reactor setups. Then, the impact of immobilization on cell physiology and fermentation performance is discussed. In a last part, we focus on the practical use of continuous fermentation and cell immobilization systems for beer production.