Elucidating the Non-Covalent Interactions that Trigger Interdigitation in Lead-Halide Layered Hybrid Perovskites.

Two-dimensional (2D) hybrid organic-inorganic perovskites constitute a versatile class of materials applied to a variety of optoelectronic devices. These materials are composed of alternating layers of inorganic lead halide octahedra and organic ammonium cations. Most perovskite research studies so far have focused on organic sublattices based on phenethylammonium and alkylammonium cations, which are packed by van der Waals cohesive forces. Here, we report a more complex organic sublattice containing benzotriazole-based ammonium cations packed through interdigitated π-π stacking and hydrogen bonding. Single crystals and thin films of four perovskite derivatives are studied in depth with optical spectroscopy and X-ray diffraction, supported by density-functional theory calculations. We quantify the lattice stabilization of interdigitation, dipole-dipole interactions, and inter- as well as intramolecular hydrogen bonding. Furthermore, we investigate the driving force behind interdigitation by defining a steric occupancy factor σ and tuning the composition of the organic and inorganic sublattice. We relate the phenomenon of interdigitation to the available lattice space and to weakened hydrogen bonding to the inorganic octahedra. Finally, we find that the stabilizing interactions in the organic sublattice slightly improve the thermal stability of the perovskite. This work sheds light on the design rules and structure-property relationships of 2D layered hybrid perovskites.

Metal Nanocatalyst Sintering Interrogated at Complementary Length Scales.

Metal nanoparticle (NP) sintering is a prime cause of catalyst degradation, limiting its economic lifetime and viability. To date, sintering phenomena are interrogated either at the bulk scale to probe averaged NP properties or at the level of individual NPs to visualize atomic motion. Yet, "mesoscale" strategies which bridge these worlds can chart NP populations at intermediate length scales but remain elusive due to characterization challenges. Here, a multi-pronged approach is developed to provide complementary information on Pt NP sintering covering multiple length scales. High-resolution scanning electron microscopy (HRSEM) and Monte Carlo simulation show that the size evolution of individual NPs depends on the number of coalescence events they undergo during their lifetime. In its turn, the probability of coalescence is strongly dependent on the NP's mesoscale environment, where local population heterogeneities generate NP-rich "hotspots" and NP-free zones during sintering. Surprisingly, advanced in situ synchrotron X-ray diffraction shows that not all NPs within the small NP sub-population are equally prone to sintering, depending on their crystallographic orientation on the support surface. The demonstrated approach shows that mesoscale heterogeneities in the NP population drive sintering and mitigation strategies demand their maximal elimination via advanced catalyst synthesis strategies.

Sensing the framework state and guest molecules in MIL-53(Al) via the electron paramagnetic resonance spectrum of VIV dopant ions.

X-ray diffraction (XRD) and electron paramagnetic resonance spectroscopy (EPR) were combined to study the structural transformations induced by temperature, pressure and air humidity of the "breathing" metal-organic framework (MOF) MIL-53(Al), doped with paramagnetic VIV ions, after activation. The correlation between in situ XRD and thermogravimetric analysis measurements showed that upon heating this MOF in air, starting from ambient temperature and pressure, the narrow pore framework first dehydrates and after that makes the transition to a large pore state (lp). The EPR spectra of VIV[double bond, length as m-dash]O molecular ions, replacing Al-OH in the structure, also allow to distinguish the as synthesized, hydrated (np-h) and dehydrated narrow pore (np-d), and lp states of MIL-53(Al). A careful analysis of EPR spectra recorded at microwave frequencies between 9.5 and 275 GHz demonstrates that all VIV[double bond, length as m-dash]O in the np-d and lp states are equivalent, whereas in the np-h state (at least two) slightly different VIV[double bond, length as m-dash]O sites exist. Moreover, the lp MIL-53(Al) framework is accessible to oxygen, leading to a notable broadening of the VIV[double bond, length as m-dash]O EPR spectrum at pressures of a few mbar, while such effect is absent for the np-h and np-d states for pressures up to 1 bar.

Mechanism of the Intermediary Phase Formation in Ti-20 wt. % Al Mixture during Pressureless Reactive Sintering.

This work aims to describe the mechanism of intermediary phases formation in TiAl20 (wt. %) alloy composition during reactive sintering. The reaction between titanium and aluminum powders was studied by in situ diffraction and the results were confirmed by annealing at various temperatures. It was found that the Ti2Al5 phase formed preferentially and its formation was detected at 400 °C. So far, this phase has never been found in this alloy composition during reactive sintering processes. Subsequently, the Ti2Al5 phase reacted with the titanium, and the formation of the major phase, Ti3Al, was accompanied by the minor phase, TiAl. Equations of the proposed reactions are presented in this paper and their thermodynamic and kinetic feasibility are supported by Gibbs energies of reaction and reaction enthalpies.

Thickness Characterization Toolbox for Transparent Protective Coatings on Polymer Substrates.

The thickness characterization of transparent protective coatings on functional, transparent materials is often problematic. In this paper, a toolbox to determine the thicknesses of a transparent coating on functional window films is presented. The toolbox consists of a combination of secondary ion mass spectrometry and profilometry and can be transferred to other transparent polymeric materials. A coating was deposited on designed model samples, which were characterized with cross-sectional views in transmission and in scanning/transmission electron microscopy and ellipsometry. The toolbox was then used to assess the thicknesses of the protective coatings on the pilot-scale window films. This coating was synthesized using straightforward sol-gel alkoxide chemistry. The kinetics of the condensation are studied in order to obtain a precursor that allows fast drying and complete condensation after simple heat treatment. The shelf life of this precursor solution was investigated in order to verify its accordance to industrial requirements. Deposition was performed successfully at low temperatures below 100 °C, which makes deposition on polymeric foils possible. By using roll-to-roll coating, the findings of this paper are easily transferrable to industrial scale. The coating was tested for scratch resistance and adhesion. Values for the emissivity (ε) of the films were recorded to justify the use of the films obtained as infrared reflective window films. In this work, it is shown that the toolbox measures similar thicknesses to those measured by electron microscopy and can be used to set a required thickness for protective coatings.

Molecular layer deposition of "titanicone", a titanium-based hybrid material, as an electrode for lithium-ion batteries.

Molecular layer deposition (MLD) of hybrid organic-inorganic thin films called "titanicones" was achieved using tetrakisdimethylaminotitanium (TDMAT) and glycerol (GL) or ethylene glycol (EG) as precursors. For EG, in situ ellipsometry revealed that the film growth initiates, but terminates after only 5 to 10 cycles, probably because both hydroxyls react with the surface. GL has a third hydroxyl group, and in that case steady state growth could be achieved. The GL process displayed self-limiting reactions for both reactants in the temperature range from 80°C to 160°C, with growth rates of 0.9 to 0.2 Å per cycle, respectively. Infrared (FTIR) and X-ray photoelectron spectroscopy (XPS) confirmed the hybrid nature of the films, with a carbon atomic concentration of about 20%. From X-ray reflectivity, the density was estimated at 2.2 g cm(-3). A series of films was subjected to water etching and annealing under air or He atmosphere at 500°C. The carbon content of the films was monitored with FTIR and XPS. Almost all carbon was removed from the air annealed and water treated films. The He annealed samples however retained their carbon content. Ellipsometric porosimetry (EP) showed 20% porosity in the water etched samples, but no porosity in the annealed samples. Electrochemical measurements revealed lithium ion activity during cyclic voltammetry in all treated films, while the as-deposited film was inactive. With increasing charge current, the He annealed samples outperformed amorphous and anatase TiO2 references in terms of capacity retention.

Combinatorial Study of Ag-Te Thin Films and Their Application as Cation Supply Layer in CBRAM Cells.

In this work, we investigate binary Ag-Te thin films and their functionality as a cation supply layer in conductive bridge random access memory devices. A combinatorial sputter deposition technique is used to deposit a graded Ag(x)Te(1-x) (0 < x < 1) layer with varying composition as a function of the position on the substrate. The crystallinity, surface morphology, and material stability under thermal treatment as a function of the composition of the material are investigated. From this screening, a narrow composition range between 33 and 38 at% Te is selected which shows a good morphology and a high melting temperature. Functionality of a single Ag(2-δ)Te composition as cation supply layer in CBRAM with dedicated Al2O3 switching layer is then investigated by implementing it in 580 µm diameter dot Pt/Ag(2-δ)Te/Al2O3/Si cells. Switching properties are investigated and compared to cells with a pure Ag cation supply layer. An improved cycling behavior is observed when Te is added compared to pure Ag, which we relate to the ionic conducting properties of Ag2Te and the preferred formation of Ag-Te phases.

Plasma-enhanced atomic layer deposition: a gas-phase route to hydrophilic, glueable polytetrafluoroethylene.

This communication reports an approach based on plasma-enhanced atomic layer deposition of aluminium oxide for the functionalization of polytetrafluoroethylene (PTFE or "Teflon") surfaces. Alternating exposure of PTFE to oxygen plasma and trimethylaluminium causes a permanent hydrophilic effect, and a more than 10-fold improvement of the "glueability" of PTFE to aluminium.

Thermal and plasma-enhanced atomic layer deposition of TiN using TDMAT and NH3 on particles agitated in a rotary reactor.

Titanium nitride (TiN) shows metallic-type electrical behavior and is therefore an interesting material to improve the conductivity of a wide variety of powders. Atomic layer deposition (ALD) is an excellent technique for achieving the desired ultrathin but conformal coatings. To conformally coat large amounts of particles using ALD, agitation of the particles and efficient reactant usage are necessary. Thermal and plasma-enhanced ALD growth of TiN using tetrakis(dimethylamino)titanium (TDMAT) and NH3 as precursors on agitated particles was performed using a rotary reactor to deposit TiN on ZnO submicrometer powder. The NH3 plasma pulse was monitored using in situ mass spectrometry (MS) and optical emission spectroscopy (OES) measurements to gain insight into the reaction mechanism of the plasma-enhanced process. X-ray photoelectron spectroscopy (XPS) and powder resistivity measurements were performed to determine the influence of the deposition process on the composition and conductivity of the deposited TiN layers.