Acceptability of a Dapivirine/Placebo Gel Administered Rectally to HIV-1 Seronegative Adults (MTN-026).

This study describes the acceptability of a rectal microbicide gel formulation using dapivirine (DPV) among men and women from two countries (United States and Thailand) participating in the Microbicide Trials Network-026 trial. We evaluated participants' acceptability of a rectal DPV/placebo gel as part of a Phase I trial (N = 26; 18 male, 8 female). Participants reported favorable acceptability of the study gel, with most participants reporting that they liked the gel the same (n = 14; 53.8%) or more (n = 11; 42.4%) than when they started the trial. Over half of participants noted that they would prefer the gel over condoms (n = 13; 50%) or that they liked condoms and the gel equally (n = 8; 30.8%). Side effects across products included leakage (n = 8; 30.8%), diarrhea (n = 4; 15.4%), or soiling (n = 1; 3.8%). The high acceptability of a rectal gel underscores its promise as a short-acting biomedical prevention, warranting future research for HIV prevention.Trial Registration: NCT03239483.

RESUMEN: Este estudio describe la aceptabilidad de un microbicida rectal (RM) con dapivirina (DPV) formulado como un gel por hombres y mujeres de dos países (Estados Unidos y Tailandia) que participaron como parte del Microbicide Trials Network (MTN)-026. Evaluamos la aceptabilidad de un gel rectal de DPV y un placebo como parte de un estudio de Fase I (N = 26; 18 hombres, 8 mujeres). Los participants informaron una aceptabilidad favorable sobre el gel del estudio; la mayoría de los participantes informaron que les gustó el gel igual (n = 14; 53.8%) o más (n = 11; 42.4%) que cuando comenzaron el estudio. Más de la mitad de los participantes señalaron que preferirían el gel sobre los condones (n = 13; 50%) o que les gustaban los condones y el gel por igual (n = 8; 30,8%). Los efectos de los productos incluyeron fugas (n = 8; 30,8%), diarrea (n = 4; 15,4%) o ensuciamiento (n = 1; 3,8%). La alta aceptabilidad de un gel rectal enfatiza su promesa para la prevención biomédica de acción corta y justifica futuras investigaciones para la prevención del VIH.

Safety and Efficacy of a Dapivirine Vaginal Ring for HIV Prevention in Women.

BACKGROUND: The incidence of human immunodeficiency virus (HIV) infection remains high among women in sub-Saharan Africa. We evaluated the safety and efficacy of extended use of a vaginal ring containing dapivirine for the prevention of HIV infection in 1959 healthy, sexually active women, 18 to 45 years of age, from seven communities in South Africa and Uganda. METHODS: In this randomized, double-blind, placebo-controlled, phase 3 trial, we randomly assigned participants in a 2:1 ratio to receive vaginal rings containing either 25 mg of dapivirine or placebo. Participants inserted the rings themselves every 4 weeks for up to 24 months. The primary efficacy end point was the rate of HIV type 1 (HIV-1) seroconversion. RESULTS: A total of 77 participants in the dapivirine group underwent HIV-1 seroconversion during 1888 person-years of follow-up (4.1 seroconversions per 100 person-years), as compared with 56 in the placebo group who underwent HIV-1 seroconversion during 917 person-years of follow-up (6.1 seroconversions per 100 person-years). The incidence of HIV-1 infection was 31% lower in the dapivirine group than in the placebo group (hazard ratio, 0.69; 95% confidence interval [CI], 0.49 to 0.99; P=0.04). There was no significant difference in efficacy of the dapivirine ring among women older than 21 years of age (hazard ratio for infection, 0.63; 95% CI, 0.41 to 0.97) and those 21 years of age or younger (hazard ratio, 0.85; 95% CI, 0.45 to 1.60; P=0.43 for treatment-by-age interaction). Among participants with HIV-1 infection, nonnucleoside reverse-transcriptase inhibitor resistance mutations were detected in 14 of 77 participants in the dapivirine group (18.2%) and in 9 of 56 (16.1%) in the placebo group. Serious adverse events occurred more often in the dapivirine group (in 38 participants [2.9%]) than in the placebo group (in 6 [0.9%]). However, no clear pattern was identified. CONCLUSIONS: Among women in sub-Saharan Africa, the dapivirine ring was not associated with any safety concerns and was associated with a rate of acquisition of HIV-1 infection that was lower than the rate with placebo. (Funded by the International Partnership for Microbicides; ClinicalTrials.gov number, NCT01539226 .).

Novel Application of Hot Melt Extrusion for the Manufacturing of Vaginal Films Containing Microbicide Candidate Dapivirine.

Polymeric films are safe and effective and can be used for vaginal administration of microbicide drug candidates. Dapivirine (DPV), an investigational and clinically advanced antiretroviral drug, was selected as a model compound for this study. We have previously developed and clinically tested a quick-dissolving DPV film using solvent cast (SC) manufacturing technique. As an alternative to current pharmaceutical film manufacturing techniques, we investigated hot melt extrusion (HME) process in this study because it has several benefits, including its capacity as a continuous manufacturing process, lack of solvents, smaller footprint, and ease of scalability. The goal of this work was to evaluate the feasibility of using HME for DPV vaginal film manufacturing and to develop a robust manufacturing process using HME by evaluating the effect of process parameters on film quality and performance. DPV was successfully incorporated into a vaginal film using HME and maintained acceptable characteristics. Three process parameters (zone temperature, screw speed, and feed rate) had an impact on film quality and performance. Of these, the zone temperature was found to most significantly affect weight, thickness, puncture strength, and dissolution of films. Additionally, film manufacturing using HME was highly reproducible. Finally, the DPV HME film was comparable to films manufactured using SC in terms of physicochemical, biological, and safety characteristics including in vitro drug release, mechanical strength, tissue permeability, compatibility with commensal vaginal Lactobacilli, and in vitro bioactivity. These results demonstrate that HME is an effective, robust, and viable manufacturing method to produce vaginal films.

Formulation and characterization of polymeric films containing combinations of antiretrovirals (ARVs) for HIV prevention.

PURPOSE: To develop polymeric films containing dual combinations of anti-HIV drug candidate tenofovir, maraviroc and dapivirine for vaginal application as topical microbicides. METHODS: A solvent casting method was used to manufacture the films. Solid phase solubility was used to identify potential polymers for use in the film formulation. Physical and chemical properties (such as water content, puncture strength and in vitro release) and product stability were determined. The bioactivity of the film products against HIV was assessed using the TZM-bl assay and a cervical explant model. RESULTS: Polymers identified from the solid phase solubility study maintained tenofovir and maraviroc in an amorphous state and prevented drug crystallization. Three combination film products were developed using cellulose polymers and polyvinyl alcohol. The residual water content in all films was <10% (w/w). All films delivered the active agents with release of >50% of film drug content within 30 min. Stability testing confirmed that the combination film products were stable for 12 months at ambient temperature and 6 months under stressed conditions. Antiviral activity was confirmed in TZM-bl and cervical explant models. CONCLUSIONS: Polymeric films can be used as a stable dosage form for the delivery of antiretroviral combinations as microbicides.

Pharmacodynamic Activity of Dapivirine and Maraviroc Single Entity and Combination Topical Gels for HIV-1 Prevention.

PURPOSE: Dapivirine (DPV), a non-nucleoside reverse transcriptase inhibitor, and maraviroc (MVC), a CCR5 antagonist, were formulated into aqueous gels designed to prevent mucosal HIV transmission. METHODS: 0.05% DPV, 0.1% MVC, 0.05% DPV/0.1% MVC and placebo gels were evaluated for pH, viscosity, osmolality, and in vitro release. In vitro assays and mucosal tissues were used to evaluate anti-HIV activity. Viability (Lactobacilli only) and epithelial integrity in cell lines and mucosal tissues defined safety. RESULTS: The gels were acidic and viscous. DPV gel had an osmolality of 893 mOsm/kg while the other gels had an osmolality of <100 mOsm/kg. MVC release was similar from the single and combination gels (~5 µg/cm(2)/min(1/2)), while DPV release was 10-fold less from the single as compared to the combination gel (0.4331 µg/cm(2)/min(1/2)). Titrations of the gels showed 10-fold more drug was needed to protect ectocervical than colonic tissue. The combination gel showed ~10- and 100-fold improved activity as compared to DPV and MVC gel, respectively. All gels were safe. CONCLUSIONS: The DPV/MVC gel showed a benefit blocking HIV infection of mucosal tissue compared to the single entity gels. Combination products with drugs affecting unique steps in the viral replication cycle would be advantageous for HIV prevention.

Increased Dapivirine tissue accumulation through vaginal film codelivery of dapivirine and Tenofovir.

The HIV-1 replication inhibitor dapivirine (DPV) is one of the most promising drug candidates being used in topical microbicide products for prevention of HIV-1 sexual transmission. To be able to block HIV-1 replication, DPV must have access to the viral reverse transcriptase enzyme. The window for DPV to access the enzyme happens during the HIV-1 cellular infection cycle. Thus, in order for DPV to exert its anti-HIV activity, it must be present in the mucosal tissue or cells where HIV-1 infection occurs. A dosage form containing DPV must be able to deliver the drug to the tissue site of action. Polymeric films are solid dosage forms that dissolve and release their payload upon contact with fluids. Films have been used as vaginal delivery systems of topical microbicide drug candidates including DPV. For use in topical microbicide products containing DPV, polymeric films must prove their ability to deliver DPV to the target tissue site of action. Ex vivo exposure studies of human ectocervical tissue to DPV film revealed that DPV was released from the film and did diffuse into the tissue in a concentration dependent manner indicating a process of passive diffusion. Analysis of drug distribution in the tissue revealed that DPV accumulated mostly at the basal layer of the epithelium infiltrating the upper part of the stroma. Furthermore, as a combination microbicide product, codelivery of DPV and TFV from a polymeric film resulted in a significant increase in DPV tissue concentration [14.21 (single entity film) and 31.03 µg/g (combination film)], whereas no impact on TFV tissue concentration was found. In vitro release experiments showed that this observation was due to a more rapid DPV release from the combination film as compared to the single entity film. In conclusion, the findings of this study confirm the ability of polymeric films to deliver DPV and TFV to human ectocervical tissue and show that codelivery of the two agents has a significant impact on DPV tissue accumulation. These findings support the use of polymeric films for topical microbicide products containing DPV and/or TFV.

Phase 1 randomized trials to assess safety, pharmacokinetics, and vaginal bleeding associated with use of extended duration dapivirine and levonorgestrel vaginal rings.

BACKGROUND: Vaginal rings formulated to deliver two drugs simultaneously have potential as user-controlled, long-acting methods for dual prevention of HIV and pregnancy. METHODS: Two phase 1 randomized trials (MTN-030/IPM 041 and MTN-044/IPM 053/CCN019) respectively enrolled 24 and 25 healthy, HIV-negative participants to evaluate safety, pharmacokinetics, and vaginal bleeding associated with use of a vaginal ring containing 200mg dapivirine (DPV) and 320mg levonorgestrel (LNG) designed for 90-day use. MTN-030/IPM 041 compared the DPV/LNG ring to a DPV-only ring (200mg) over 14 days of use. MTN-044/IPM 053/CCN019 compared continuous or cyclic use of the DPV/LNG ring over 90 days of use. Safety was assessed by recording adverse events (AEs). DPV and LNG concentrations were quantified in plasma, cervicovaginal fluid, and cervical tissue. Vaginal bleeding was self-reported. RESULTS: There were no differences in the proportion of participants with grade ≥2 genitourinary AEs or grade ≥3 AEs with DPV/LNG ring vs. DPV ring use (p = .22), or with DPV/LNG ring continuous vs. cyclic use (p = .67). Higher plasma DPV concentrations were observed in users of DPV/LNG compared to DPV-only rings (Cmax p = 0.049; AUC p = 0.091). Plasma DPV and LNG concentrations were comparable with continuous and cyclic use (Cmax p = 0.74; AUC p = 0.25). With cyclic use, median nadir plasma DPV concentration was approximately 300 pg/mL two days after removal and median t1/2 for cervicovaginal fluid DPV concentration was 5.76 hours (n = 3). Overall bleeding experiences did not differ between continuous and cyclic users (p = 0.12). CONCLUSIONS: The extended duration DPV/ LNG rings were well tolerated and the observed DPV concentrations in plasma and cervicovaginal fluid when used continuously exceeded concentrations observed in previous DPV ring efficacy studies. LNG concentrations in plasma were comparable with other efficacious LNG-based contraceptives. Genital DPV concentrations had a short half-life and were thus not well sustained following ring removal.

Refining the in vitro release test method for a dapivirine-releasing vaginal ring to match in vivo performance.

Previously reported in vitro release test methods for drug-releasing vaginal rings containing poorly water-soluble drugs have described use of water-alcohol systems or surfactant solutions in efforts to maintain sink conditions. Here, as part of efforts to more closely match in vitro and in vivo release for the 25 mg dapivirine matrix-type silicone elastomer vaginal ring for HIV prevention, we have investigated alternatives to the 1:1 v/v water/isopropanol medium described previously. Specifically, we evaluated dapivirine release from rings into (i) monophasic water/isopropanol mixtures of varying compositions and (ii) biphasic buffer/octanol systems using pH 4.2 and pH 7.0 buffers. The rate and mechanism of dapivirine release were dependent upon the isopropanol concentration in the release medium, in accordance with the observed trend in drug solubility. At 0 and 10% v/v isopropanol concentrations, dapivirine release followed a partition-controlled mechansim. For media containing ≥ 20% v/v isopropanol, in vitro release of dapivirine was significantly increased and obeyed permeation-controlled kinetics. Cumulative release of ~3.5 mg dapivirine over 28 days was obtained using a water isopropanol mixture containing 20% v/v isopropanol, similar to the ~4 mg dapivirine released in vivo. Dapivirine release into the biphasic buffer/octanol system (intended to mimic the fluid/tissue environment in vivo) was constrained by the limited solubility of dapivirine in the buffer component in which the ring resided, such that cumulative dapivirine release was consistently lower than that observed with the 20% v/v isopropanol in water medium. Release into the biphasic system was also pH dependent, in line with dapivirine's pKa and with potential implications for in vivo release and absorption in women with elevated vaginal pH.

Participant experiences with a multipurpose vaginal ring for HIV and pregnancy prevention during a phase 1 clinical trial: learning from users to improve acceptability.

Introduction: With high concurrent global rates of HIV incidence and unintended pregnancy, there is a need to provide options beyond condoms to enable users to simultaneously prevent HIV acquisition and pregnancy. Multiple vaginal rings are in development as "MPTs" (multipurpose prevention technologies) as they are shown to provide several co-occurring benefits such as discretion, convenience, reversibility and user control. Methods: In this Phase 1 trial of a 3-month MPT ring in the U.S., 25 participants (low-risk for HIV and pregnancy) were randomized to use the study ring for 90 days continuously or in 28-day cycles with 2-day removal periods in between. All participants completed in-depth interviews at the end of their study participation. Results: Overall, the ring was well tolerated. Participants resoundingly endorsed the concept of an extended-use, dual-purpose vaginal ring, but reported too many functional challenges and side effects to endorse this particular ring. Participants assigned to the continuous regimen reported more positive experiences with ring use than those in the cyclic group. A minority of participants who experienced minimal side effects and did not experience challenges with vaginal retention of the ring found it appealing. However, the majority of participants experienced challenges (ring slippage, expulsions, side effects, vaginal bleeding changes) with product use that outweighed the potential benefits and led them to report that - in the future - they would not be interested in using this specific version of the ring in its current form. A subset expressed interest in using the current MPT ring under certain conditions (e.g., if fewer expulsions, less bleeding, higher risk for HIV/pregnancy). Discussion: User feedback regarding participant experiences and challenges with the study ring was continuously shared with the product developer, underscoring the value of early-stage end-user feedback in product development.

In vitro drug release, mechanical performance and stability testing of a custom silicone elastomer vaginal ring releasing dapivirine and levonorgestrel.

We have previously reported a multipurpose silicone elastomer vaginal ring providing sustained release of dapivirine (an antiretroviral) and levonorgestrel (a progestin) for HIV prevention and hormonal contraception. During initial development, issues arose due to reaction between the ethynyl group in the levonorgestrel molecule and the hydride-functionalised polydimethylsiloxane components in the silicone elastomer formulation. This unwanted reaction occurred both during and to a lesser extent after ring manufacture, impacting the curing process, the mechanical properties of the ring, and the in vitro release of levonorgestrel. Recently, we reported custom silicone elastomer grades that minimise this reaction. In this follow-on study, we describe the manufacture, in vitro drug release, mechanical, and pharmaceutical stability testing of ring formulations prepared from a custom silicone elastomer and containing 200 mg dapivirine and 80, 160, 240 or 320 mg levonorgestrel. The rings showed mechanical properties similar to marketed ring products, sustained in vitro release of both drugs over 30 days in quantities deemed clinically relevant, offered acceptable assay values, and provided good product stability over 15 weeks at 40 °C and 75% relative humidity.